4.8 Article

Enhanced performance and durability of low catalyst loading PEM water electrolyser based on a short-side chain perfluorosulfonic ionomer

期刊

APPLIED ENERGY
卷 192, 期 -, 页码 477-489

出版社

ELSEVIER SCI LTD
DOI: 10.1016/j.apenergy.2016.09.011

关键词

Hydrogen; PEM water electrolysis; Iridium-ruthenium oxide electrocatalyst; Polymer electrolyte membrane; Low noble metal loading; Short-side chain ionomer

资金

  1. European Community
  2. Fuel Cells and Hydrogen Joint Undertaking in the context of project [700008]

向作者/读者索取更多资源

Water electrolysis supplied by renewable energy is the foremost technology for producing green hydrogen for fuel cell vehicles. In addition, the ability to rapidly follow an intermittent load makes electrolysis an ideal solution for grid-balancing caused by differences in supply and demand for energy generation and consumption. Membrane-electrode assemblies (MEAs) designed for polymer electrolyte membrane (PEM) water electrolysis, based on a novel short-side chain (SSC) perfluorosulfonic acid (PFSA) membrane, Aquivion((R)), with various cathode and anode noble metal loadings, were investigated in terms of both performance and durability. Utilizing a nanosized Ir0.7Ru0.3Ox,solid solution anode catalyst and a supported Pt/C cathode catalyst, in combination with the Aquivion((R)) membrane, gave excellent electrolysis performances exceeding 3.2 A cm(-2) at 1.8 V terminal cell voltage (similar to 80% efficiency) at 90 degrees C in the presence of a total catalyst loading of 1.6 mg cm(-2). A very small loss of efficiency, corresponding to 30 mV voltage increase, was recorded at 3 A cm(-2) using a total noble Metal catalyst loading of less than 0.5 mg.cm(-2) (compared to the industry standard of 2 mg cm(-2)). Steady-State durability tests, carried out for 1000 hat 1 A.cm(-2), showed excellent stability for the MEA with total noble metal catalyst loading of 1.6 mg .cm(-2) (cell voltage increase 5 VIII). Moderate degradation rate (cell voltage increase similar to 15 V/h) was recorded for the low loading 0.5 mg .cm(-2), MEA. Similar stability characteristics were observed in durability tests at 3 A .cm(-2). These high performance and stability characteristics were attributed to the enhanced proton conductivity and good stability of the novel membrane, the optimized structural properties of the Ir and Ru oxide solid solution and the enrichment of Ir species on the surface for the anodic catalyst. (C) 2016 Elsevier Ltd. All rights reserved.

作者

我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。

评论

主要评分

4.8
评分不足

次要评分

新颖性
-
重要性
-
科学严谨性
-
评价这篇论文

推荐

暂无数据
暂无数据