相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Improvement of AA5052 sheet properties by electromagnetic twin-roll casting
J. T. Li et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
Grain refinement of hypoeutectic Al-Si alloys with B
Zongning Chen et al.
ACTA MATERIALIA (2016)
Experimental Study of Disruption of Columnar Grains During Rapid Solidification in Additive Manufacturing
Guha Manogharan et al.
JOM (2016)
Effect of potent TiB2 addition levels and impurities on the grain refinement of Al
L. Zhou et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Which wets TiB2 inoculant particles: Al or Al3Ti?
David Wearing et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Effects of grain size and dislocation density on strain hardening behavior of ultrafine grained AA1050 processed by accumulative roll bonding
S. O. Gashti et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Grain refinement in an Al-Er alloy during accumulative continuous extrusion forming
Ning Su et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Effects of twin-roll casting process parameters on the microstructure and sheet metal forming behavior of 7050 aluminum alloy
Hongbin Wang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
Microstructure and properties of squeeze cast A356 alloy processed with a vibrating slope
R. G. Guan et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
Enhanced Strength and Ductility Due to Microstructure Refinement and Texture Weakening of the GW102K Alloy by Cyclic Extrusion Compression
Jinbao Lin et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2016)
Metal solidification-nucleation-rate model under coupling effects of shearing flow and vibration
X. Wang et al.
MATERIALS SCIENCE AND TECHNOLOGY (2016)
Production of grain-refined AC7A Al-Mg alloy via solidification in ultrasonic field
W. Khalifa et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2016)
Cooling Rate Sensitivity of RE-Containing Grain Refiner and Its Impact on the Microstructure and Mechanical Properties of A356 Alloy
Hua-Rui Zhang et al.
ACTA METALLURGICA SINICA-ENGLISH LETTERS (2016)
Nanoscale precipitates strengthened lanthanum-bearing Mg-3Sn-1Mn alloys through continuous rheo-rolling
R. G. Guan et al.
SCIENTIFIC REPORTS (2016)
Ultrafine-grained Al-0.2Sc-0.1Zr alloy: The mechanistic contribution of nano-sized precipitates on grain refinement during the novel process of accumulative continuous extrusion
Y. F. Shen et al.
ACTA MATERIALIA (2015)
Grain refining mechanism in the Al/Al-Ti-B system
Z. Fan et al.
ACTA MATERIALIA (2015)
A criterion for cracking during solidification
Sindo Kou
ACTA MATERIALIA (2015)
Micro-Forming Using Ultrafine-Grained Aluminum Processed by Equal-Channel Angular Pressing
Jie Xu et al.
ADVANCED ENGINEERING MATERIALS (2015)
Effect of minor Cu content on microstructure and mechanical property of NiTiCu bulk alloys fabricated by crystallization of metallic glass powder
C. Yang et al.
INTERMETALLICS (2015)
Grain refining potency of Nb-B inoculation on Al-12Si-0.6Fe-0.5Mn alloy
L. Bolzoni et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Strain-rate-dependent deformation behavior in a Ti-based bulk metallic glass composite upon dynamic deformation
J. Bai et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Refining of metallurgical grade Si by solidification of Al-Si melt under electromagnetic stirring
Boyuan Ban et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
A Decoupling Control Model on Perturbation Method for Twin-Roll Casting Magnesium Alloy Sheet
Wenyu Zhang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2015)
Grain refinement of Al-Si alloys by Nb-B inoculation. Part II: Application to commercial alloys
L. Bolzoni et al.
MATERIALS & DESIGN (2015)
Development of Al-Nb-B master alloys using Nb and KBF4 Powders
M. Nowak et al.
MATERIALS & DESIGN (2015)
The effect of ultrasonic vibrations prior to high pressure die-casting of AA7075
R. Haghayeghi et al.
MATERIALS LETTERS (2015)
Microstructure and strain in protrusions formed during severe plastic deformation of aluminum
Cai Chen et al.
MATERIALS LETTERS (2015)
Assessment of the influence of Al-2Nb-2B master alloy on the grain refinement and properties of LM6 (A413) alloy
L. Bolzoni et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
The effect of Al-5Ti-1B on the microstructure, hardness and tensile properties of a new Zn rich aluminium alloy
S. H. Seyed Ebrahimi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Processing and properties of magnesium containing a dense uniform dispersion of nanoparticles
Lian-Yi Chen et al.
NATURE (2015)
Confinement effects on the phase transition temperature of aqueous NaCl solutions: The extended Gibbs-Thomson equation
Christopher M. Burba et al.
THERMOCHIMICA ACTA (2015)
Effects of Mn and Sn on microstructure of Al-7Si-Mg alloy modified by Sr and Al-5Ti-B
Ke Qiu et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2015)
Production Process and Properties of a Highly Porous Al Alloy Made Using NaCl Droplets as a Space Holder
Manuela Covaciu et al.
ACTA METALLURGICA SINICA-ENGLISH LETTERS (2015)
Process Design for Hybrid Sheet Metal Components
Rico Haase et al.
ACTA METALLURGICA SINICA-ENGLISH LETTERS (2015)
Microhardness and corrosion properties of hypoeutectic Al-7Si alloy processed by high-pressure torsion
Xue Wang et al.
MATERIALS & DESIGN (2015)
Technological Aspect of Processing Maps for the AA2099 Alloy
Aneta Lukaszek-Solek
ACTA METALLURGICA SINICA-ENGLISH LETTERS (2015)
Modeling of the Prediction of Densification Behavior of Powder Metallurgy Al-Cu-Mg/B4C Composites Using Artificial Neural Networks
Temel Varol et al.
ACTA METALLURGICA SINICA-ENGLISH LETTERS (2015)
Effects of Electromagnetic Stirring, Shearing, and Extrusion on TiB2 and TiAl3 Particles in Al-5Ti-1B(wt.%) Alloy
Zhan-yong Zhao et al.
MATERIALS AND MANUFACTURING PROCESSES (2015)
Review of High-Power Ultrasound-Industrial Applications and Measurement Methods
Gerald Harvey et al.
IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL (2014)
Preparation of a novel Al-3B-5Sr master alloy and its modification and refinement performance on A356 alloy
X. L. Cui et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Grain refinement limit and mechanical properties of 6063 alloy inoculated by Al-Ti-C (B) master alloys
Enzhao Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Influence of nitrogen on the synthesis and nucleation ability of TiCx in Al-Ti-C master alloy
Ping Zhang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
Influence of a new kind of Al-Ti-C master alloy on the microstructure and mechanical properties of Al-5Cu alloy
Tao Wang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2014)
The role of ultrasonic treatment in refining the as-cast grain structure during the solidification of an Al-2Cu alloy
Gui Wang et al.
JOURNAL OF CRYSTAL GROWTH (2014)
Effect of Al-5Ti-1B-1Re on the Microstructure and Hot Crack of As-Cast Al-Zn-Mg-Cu Alloy
H. J. Wang et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)
Mechanical and Microstructural Properties of Ultra-fine Grained AZ91 Magnesium Alloy Tubes Processed via Multi Pass Tubular Channel Angular Pressing (TCAP)
G. Faraji et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2014)
Microstructure and Mechanical Properties in Dissimilar Butt Friction Stir Welding of Severely Plastic Deformed Aluminum AA 1050 and Commercially Pure Copper Sheets
H. Barekatain et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2014)
Optimization of weld characteristics of friction welded AA 6061-AA 6351 joints using grey-principal component analysis (G-PCA)
R. Adalarasan et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2014)
Effects of combinative addition of lanthanum and boron on grain refinement of Al-Si casting alloys
Yu Chen et al.
MATERIALS & DESIGN (2014)
Effect of grain refinement on mechanical properties and sliding wear resistance of extruded Sc-free 7042 aluminum alloy
M. Vasheghani Farahani et al.
MATERIALS & DESIGN (2014)
被撤回的出版物: Characterization of ultrafine-grained aluminum tubes processed by Tube Cyclic Extrusion-Compression (TCEC) (Retracted article. See vol. 130, pg. 312, 2017)
A. Babaei et al.
MATERIALS CHARACTERIZATION (2014)
Mechanical Properties and Microstructure of Thin Plates of A6061 Wrought Aluminum Alloy Using Rheology Forging Process with Electromagnetic Stirring
Chul Kyu Jin et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2014)
Microstructure and properties of AA7075/Al-SiC composites fabricated using powder metallurgy and hot pressing
Aykut Canakci et al.
POWDER TECHNOLOGY (2014)
Heat Transfer, Solidification, and Microstructural Evolution in Al-33Cu Alloy During the Starting of Twin Roll Strip Casting
Seshadev Sahoo et al.
STEEL RESEARCH INTERNATIONAL (2014)
Grain refinement of Al-5%Cu aluminum alloy under mechanical vibration using meltable vibrating probe
Hong-min Guo et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2014)
Microstructure and Mechanical Properties of Galvanized Steel/AA6061 Joints by Laser Fusion Brazing Welding
Junxia Lu et al.
ACTA METALLURGICA SINICA-ENGLISH LETTERS (2014)
Developments in Processing of Functionally Gradient Metals and Metal-Ceramic Composites: A Review
T. P. D. Rajan et al.
ACTA METALLURGICA SINICA-ENGLISH LETTERS (2014)
The grain refinement mechanism of cast aluminium by zirconium
Feng Wang et al.
ACTA MATERIALIA (2013)
Revisiting the role of peritectics in grain refinement of Al alloys
Feng Wang et al.
ACTA MATERIALIA (2013)
Effect of the casting temperature on temperature field and microstructure of A2017 alloy during an innovative continuous semisolid rolling process with a vibrating sloping plate device
R. G. Guan et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Evolution of a martensitic structure in a Cu-Al alloy during processing by high-pressure torsion
G. F. Zhang et al.
JOURNAL OF MATERIALS SCIENCE (2013)
Microstructure of Al-Ti-B-Er refiner and its grain refining performance
Ma Tengfei et al.
JOURNAL OF RARE EARTHS (2013)
The effect of Al-5Ti-1B grain refiner on the structure and tensile properties of Al-20%Mg alloy
O. Fakhraei et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Process Parameter Optimizing and Studies on Microstructure and Properties of AZ31 Alloy Prepared by Semisolid Rolling Process
Renguo Guan et al.
ACTA METALLURGICA SINICA-ENGLISH LETTERS (2013)
Microstructure Formation Mechanism During a Novel Semisolid Rheo-rolling Process of AZ91 Magnesium Alloy
Zhanyong Zhao et al.
ACTA METALLURGICA SINICA-ENGLISH LETTERS (2013)
Local non-equilibrium diffusion model for solute trapping during rapid solidification
S. L. Sobolev
ACTA MATERIALIA (2012)
AlB3 master alloy to grain refine AlSi10Mg and AlSi12Cu aluminium foundry alloys
Yucel Birol
JOURNAL OF ALLOYS AND COMPOUNDS (2012)
Grain refinement mechanism in an Al-Si-Mg alloy with scandium
Ussadawut Patakham et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2012)
Microstructure and mechanical properties of an asymmetric twin-roll cast AZ31 magnesium alloy strip
Hu Zhao et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2012)
Microstructure evolution and properties of Mg-3Sn-1Mn (wt%) alloy strip processed by semisolid rheo-rolling
R. G. Guan et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2012)
Microstructural characterization and mechanical properties of nanostructured AA1070 aluminum after equal channel angular extrusion
B. Tolaminejad et al.
MATERIALS & DESIGN (2012)
The Effect of Al-5Ti-1B on Microstructure and Mechanical Properties of Al-12Si-xFe Alloy
Sergio Haro Rodriguez et al.
MATERIALS AND MANUFACTURING PROCESSES (2012)
Effects of high magnetic field on the evolutions of constituent phases in 7085 aluminum alloy during homogenization
Lizi He et al.
MATERIALS CHARACTERIZATION (2012)
Parallel tubular channel angular pressing (PTCAP) as a new severe plastic deformation method for cylindrical tubes
Ghader Faraji et al.
MATERIALS LETTERS (2012)
Grain refinement of direct chill cast 7050 aluminium alloy with low frequency electromagnetic field
Yubo Zuo et al.
ADVANCES IN METALLURGICAL AND MINING ENGINEERING (2012)
Homogeneous deformation of Ti41 5Cu37 5Ni7 5Zr2 5Hf5Sn5Si1 bulk metallic glass in the supercooled liquid region
J. N. Mei et al.
INTERMETALLICS (2011)
Microstructure evolution of Al-Si semi-solid slurry by gas bubble stirring method
Zhang Lei et al.
JOURNAL OF CENTRAL SOUTH UNIVERSITY OF TECHNOLOGY (2011)
Formation of the solidified microstructure in Mg-Sn binary alloy
J. W. Fu et al.
JOURNAL OF CRYSTAL GROWTH (2011)
Influence of ultrasonic melt treatment on microstructure and mechanical properties of AlSi9Cu3 alloy
H. Puga et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)
Effect of Compression with Oscillatory Torsion Processing on Structure and Properties of Cu
Kinga Rodak et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2011)
Microstructures and Mechanical Properties of Al/Mg Alloy Multilayered Composites Produced by Accumulative Roll Bonding
H. S. Liu et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2011)
Investigation of microstructures and mechanical properties of A356 aluminum alloy produced by expendable pattern shell casting process with vacuum and low pressure
Wenming Jiang et al.
MATERIALS & DESIGN (2011)
Effects of Al-5Ti-1 B on the structure and hardness of a super high strength aluminum alloy produced by strain-induced melt activation process
M. Alipour et al.
MATERIALS & DESIGN (2011)
Effect of calcium addition on the microstructure and compressive deformation behaviour of 7178 aluminium alloy
D. P. Mondal et al.
MATERIALS & DESIGN (2011)
Purification of an industrial aluminum alloy by melt stirring during Ohno Continuous Casting process
Simbarashe Fashu et al.
MATERIALS LETTERS (2011)
Microstructural evolution in an aluminum solid solution alloy processed by ECAP
Cheng Xu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Deformation resistance in the transition from coarse-grained to ultrafine-grained Cu by severe plastic deformation up to 24 passes of ECAP
W. Blum et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Grain refining potency of Al-B master alloy on pure aluminum
Tongmin Wang et al.
SCRIPTA MATERIALIA (2011)
The effect of cooling rate on the structure and properties of closed-cell aluminium foams
M. Mukherjee et al.
ACTA MATERIALIA (2010)
Effects of trace C addition on the microstructure and refining efficiency of Al-Ti-B master alloy
P. T. Li et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2010)
Liquid phase separation and microstructure characterization in a designed Al-based amorphous matrix composite with spherical crystalline particles
Jie He et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2010)
Grain refinement of AA333 aluminium cast alloy by Al-Ti granulated flux
Bondan T. Sofyan et al.
MATERIALS & DESIGN (2010)
Effect of cooling rate on microstructure and deformation behavior of Ti-based metallic glassy/crystalline powders
D. J. Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Hardening and microstructural reactions in high-temperature equal-channel angular pressed Mg-Nd-Gd-Zn-Zr alloy
G. Sha et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
DEVELOPMENTS IN THE STUDY OF COINTEGRATED ECONOMIC VARIABLES
C. W. J Granger
OXFORD BULLETIN OF ECONOMICS AND STATISTICS (2010)
Prediction of the maximal recalescence temperature upon rapid solidification of bulk undercooled CU70Ni30 alloy
W. Yang et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Dynamical solidification behaviors and microstructural evolution during vibrating wavelike sloping plate process
R. G. Guan et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Grain refinement effect of a pulsed magnetic field on as-cast superalloy K417
Xiaoping Ma et al.
JOURNAL OF MATERIALS RESEARCH (2009)
Study on the ability of mechanical vibration for the production of thixotropic microstructure in A356 aluminum alloy
F. Taghavi et al.
MATERIALS & DESIGN (2009)
Study on the effect of prolonged mechanical vibration on the grain refinement and density of A356 aluminum alloy
Farshid Taghavi et al.
MATERIALS & DESIGN (2009)
Metallurgical structure of A356 aluminum alloy solidified under mechanical vibration: An investigation of alternative semi-solid casting routes
Chawalit Limmaneevichitr et al.
MATERIALS & DESIGN (2009)
Repeated nucleation in an undercooled tin droplet by fast scanning calorimetry
B. Yang et al.
MATERIALS LETTERS (2009)
Useful properties of twist extrusion
Y. Beygelzimer et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Undercooling and solidification of Ni77P23alloy in a 52-m drop tube
Li Gong et al.
Chinese Physics B (2008)
Two novel rolling processes of porous metal preforms prepared by spray deposition technique using conventional rolling mill
Meiyan Zhan et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
The influence of TiB2 particles on the effectiveness of Al-3Ti-0.15C grain refiner
Iztok Naglic et al.
MATERIALS CHARACTERIZATION (2008)
The significance of strain reversals during processing by high-pressure torsion
Megumi Kawasaki et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Continuous static recrystallization in ultrafine-grained copper processed by multi-directional forging
A. Takayama et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Using high-pressure torsion for metal processing: Fundamentals and applications
Alexander P. Zhilyaev et al.
PROGRESS IN MATERIALS SCIENCE (2008)
Microstructural refinement and property enhancement of cast light alloys via friction stir processing
Z. Y. Ma et al.
SCRIPTA MATERIALIA (2008)
Potency of high-intensity ultrasonic treatment for grain refinement of magnesium alloys
A. Ramirez et al.
SCRIPTA MATERIALIA (2008)
Effects of vibration and grain refiner on microstructure of semisolid slurry of hypoeutectic Al-Si alloy
Zhao Jun-wen et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2008)
Effect of microstructures on the compressive deformation and fracture behaviors of Zr47Cu46Al7 bulk metallic glass composites
J. T. Fan et al.
JOURNAL OF NON-CRYSTALLINE SOLIDS (2007)
Microstructure and tensile properties of twin-roll cast Mg-Zn-Mn-Al alloys
S. S. Park et al.
SCRIPTA MATERIALIA (2007)
Feasibility study of twin roll casting process for magnesium alloys
H. Watari et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)
Effects of electric current pulse on stability of solid/liquid interface of Al-4.5 wt.% Cu alloy during directional solidification
Xiliang Liao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
The principles of grain refinement in equal-channel angular pressing
Terence G. Langdon
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Microstructure and mechanical property studies of AA6056 friction stir welded plate
M. Cabibbo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
The glass-forming ability of Pr-Ni-Al bulk metallic glasses
Q. G. Meng et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2007)
The grain size control of A356 aluminum alloy by horizontal electromagnetic stirring for rheology forging
C. G. Kang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2007)
New methods for severe plastic deformation processing
David J. Alexander
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2007)
Rapid solidification of bulk undercooled hypoperitectic Fe-Cu alloy
Y. Z. Chen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2007)
Role of size and cooling rate in quenched droplet of Sn-Bi eutectic alloy
Q. J. Zhai et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Influence of rapid solidification on the microstructure of AZ91HP alloy
J. Cai et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2006)
Microstructure and grain refining performance of Al-5Ti-1B master alloy prepared under high-intensity ultrasound
Yanfeng Han et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Grain refinement of an aluminum alloy by introducing gas bubbles during solidification
J. Wannasin et al.
SCRIPTA MATERIALIA (2006)
Fragility of superheated melts and glass-forming ability in Pr-based alloys
QG Meng et al.
SCRIPTA MATERIALIA (2006)
Effect of the addition of refiners and/or modifiers on the microstructure of die cast Al-12Si alloys
J Asensio-Lozano et al.
SCRIPTA MATERIALIA (2006)
Metal-like growth of silicon during rapid solidification by quenching undercooled droplets on a chill plate
Q Wang et al.
SCRIPTA MATERIALIA (2006)
Effect of Fe on grain refinement of commercial purity aluminum
Yijie Zhang et al.
MATERIALS & DESIGN (2006)
Microstructural evolution in commercial purity aluminum during high-pressure torsion
AP Zhilyaev et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Microstructural stress concentration: An important role in grain refinement of rheocasting structure
Z Yang et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2005)
Influence of high-intensity ultrasound on grain refining performance of Al-5Ti-1B master alloy on aluminium
YF Han et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Development of Al-Ti-C grain refiners and study of their grain refining efficiency on Al and Al-7Si alloy
GSV Kumar et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2005)
Grain refinement and superplasticity in an aluminum alloy processed by high-pressure torsion
G Sakai et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Superplasticity and superplastic forming ability of a Zr-Ti-Ni-Cu-Be bulk metallic glass in the supercooled liquid recgion
G Wang et al.
JOURNAL OF NON-CRYSTALLINE SOLIDS (2005)
Prediction of grain size of Al-7Si alloy by neural networks
NS Reddy et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Refining mechanism of solidified structure of alloy by electromagnetic refining process
K Sugiura et al.
ISIJ INTERNATIONAL (2005)
The twin-roll strip casting of magnesium
D Liang et al.
JOM (2004)
Continuous processing of ultrafine grained Al by ECAP-Conform
GJ Raab et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Twin roll casting of aluminum alloy strips
T Haga et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
Microstructural characterization of in situ TiC/Al and TiC/Al-20Si-5Fe-3Cu-1Mg composites prepared by spray deposition
B Yang et al.
ACTA MATERIALIA (2003)
Melt ejection twin roll caster for the strip casting of aluminum alloy
T Haga et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
Electromagnetic stirring for continuous casting - Part I
S Kunstreich
REVUE DE METALLURGIE-CAHIERS D INFORMATIONS TECHNIQUES (2003)
Microstructural investigation friction stir welded 7050-T651 aluminium
JQ Su et al.
ACTA MATERIALIA (2003)
The status of twin-roll casting technology
R Wechsler
SCANDINAVIAN JOURNAL OF METALLURGY (2003)
Microstructural evolution during accumulative roll-bonding of commercial purity aluminum
X Huang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Comparison of continuous strip casting with conventional technology
N Zapuskalov
ISIJ INTERNATIONAL (2003)
Semisolid strip casting using a twin roll caster equipped with a cooling slope
T Haga
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2002)
Properties of ultrafine-grained steel by repeated shear deformation of side extrusion process
A Azushima et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2002)
Solidification structure formation in undercooled Fe-Ni alloy
JF Li et al.
ACTA MATERIALIA (2002)
Semisolid metal processing
Z Fan
INTERNATIONAL MATERIALS REVIEWS (2002)
Rotary-die equal-channel angular pressing of an Al-7 mass% Si-0.35 mass% Mg alloy
Y Nishida et al.
SCRIPTA MATERIALIA (2001)
In-mold electromagnetic stirring in continuous casting
K Fujisaki
IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2001)
A high speed twin roll caster for aluminum alloy strip
T Haga et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)
A model of grain refinement incorporating alloy constitution and potency of heterogeneous nucleant particles
MA Easton et al.
ACTA MATERIALIA (2001)
Microstructures and dislocation configurations in nanostructured Cu processed by repetitive corrugation and straightening
JY Huang et al.
ACTA MATERIALIA (2001)
Semi-solid roll casting of aluminum alloy strip by melt drag twin roll caster
T Haga
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)
Nanocrystallization and high tensile strength of amorphous Zr-Al-Ni-Cu-Ag alloys
TK Han et al.
METALS AND MATERIALS-KOREA (2001)
Semi-solid processing of engineering alloys by a twin-screw rheomoulding process
S Ji et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)
Continuous casting of steels in Japan
Ken-ichi Miyazawa
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2001)
Continuous dynamic recrystallization during friction stir welding of high strength aluminum alloys
KV Jata et al.
SCRIPTA MATERIALIA (2000)
Influence of pressing temperature on microstructural development in equal-channel angular pressing
A Yamashita et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)
Effect of low frequency vibration on macro and micro structures of LM6 alloys
K Kocatepe et al.
JOURNAL OF MATERIALS SCIENCE (2000)
Development of an efficient grain refiner for Al-7Si alloy and its modification with strontium
SA Kori et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)
Development of a multi-pass facility for equal-channel angular pressing to high total strains
K Nakashima et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)
The possible reduction of alumina to aluminum using hydrogen
O Braaten et al.
JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY (2000)
Observation of the periodic fluctuant dendritic structure in an Al-38 wt% Cu hypereutectic alloy processed by ACRT-B method
D Ma et al.
JOURNAL OF CRYSTAL GROWTH (2000)
分享论文
