Characterization, Tribological and Mechanical Properties of Plasma Paste Borided AISI 316 Steel

The AISI 316 steel was treated by the plasma paste boriding by using a gas mixture of 70%H-2-30%Ar with a boron source of 100% B2O3 in the temperature range of 700-800 degrees C for 3, 5 and 7 h. The boride layers formed on the samples were observed by scanning electron microscope. The iron borides were also identified by the use of an X-ray microanalyzer, equipped with energy dispersive X-ray spectroscopy. The XRD analysis was carried out to identify the iron and metallic borides present inside the boride layer. Based on the kinetic data, the value of boron activation energy for the AISI 316 steel was estimated as 118.12 kJ mol(-1) and compared with the data available in the literature. A regression model based on ANOVA analysis was used to predict the boride layers' thicknesses depending on the boriding parameters: the treatment time and the boriding temperature. A good correspondence was obtained between the experimental values and those predicted by the regression model. Furthermore, the wear behavior of the sample borided at 750 degrees C for 5 h was investigated. The significant increase in wear resistance of plasma borided layer was observed in comparison with the untreated AISI 316 steel. The nanomechanical properties of the sample, plasma paste borided at 700 degrees C for 7 h, were examined using the nanoindenter with a Vickers diamond tip. The load-displacement curves, as well as, Young's moduli and hardness were shown for the selected measurements. The obtained results depended on the phase composition of the tested area.