期刊
INTERNATIONAL JOURNAL OF INDUSTRIAL CHEMISTRY
卷 8, 期 4, 页码 425-431出版社
SPRINGER HEIDELBERG
DOI: 10.1007/s40090-017-0131-2
关键词
Acid dye; Migration; Ultrasound; Wool; Dye exhaustion
资金
- Hubei Modern Textile Engineering and Technology Research Center, Wuhan Textile University, China [153102]
Wool fiber strength and handle is damaged by holding for prolonged periods at normal dyeing temperatures (98 degrees C). Lower dyeing temperatures can be employed to color wool whilst reducing damage caused to the fiber. However, these lower temperature dyeing processes often have a long dyeing time and/or require the addition of chemicals to achieve adequate dye exhaustion and migration. The use of ultrasonic irradiation was used to reduce dyeing times and temperatures whilst increasing dye migration and fastness. It has used 30 kHz frequency level, effective power of 120 and 350 W heating power in ultrasonic machine. In this work, wool dyeing was carried out on single jersey knitted fabric using an acid dye with and without ultrasonic irradiation at 60, 70, and 80 degrees C. Dye exhaustion was measured using UV/visible absorbance of the dye bath before and during the dyeing cycle. For the measurement of nodal/anti-nodal point of energy, at 60, 70, and 80 degrees C dyeing was done in open bath of ultrasonic machine with and without sonication at high liquor ratio. To compare the dye uptake (%) at high/conventional process, sample was dyed at 95 degrees C. Optical and scanning electron microscopy were used to measure the diameter and surface changes of the fiber, respectively. Wash and rub fastness was measured on the dyed fabrics after rinsing and drying. Ultrasonic irradiation during the dyeing of wool caused an increase in the dye exhaustion rate for acid dye. This change in rate is believed to have been caused by a reduction in the viscous boundary layer of liquor surrounding the fiber present in an ultrasonic irradiated environment. An increased dye migration due to cuticle cracking and fiber swelling was not deemed to have occurred as wet fiber diameter was not changed by submersion in the dye liquor in the presence of ultrasound and no surface cracking was evident in scanning electron microscopy images. Some cuticle structure changes occurred with turning up or ripping off of the cuticle tips evident. Both wash and rub fastness were improved for ultrasonically dyed fiber with dyeing temperatures of 70 and 80 degrees C being suitable for the low-temperature dyeing of wool.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据