4.7 Article

Effect of rock joint roughness on its cyclic shear behavior

期刊

出版社

SCIENCE PRESS
DOI: 10.1016/j.jrmge.2017.09.001

关键词

Cyclic shear test; Shear behavior; Shear strength; Regular joint; Irregular joint; Joint dilation; Asperity degradation

资金

  1. Indian Institute of Technology Delhi

向作者/读者索取更多资源

Rock joints are often subjected to dynamic loads induced by earthquake and blasting during mining and rock cutting. Hence, cyclic shear load can be induced along the joints and it is important to evaluate the shear behavior of rock joint under this condition. In the present study, synthetic rock joints were prepared with plaster of Paris (PoP). Regular joints were simulated by keeping regular asperity with asperity angles of 15 degrees-15 degrees and 30 degrees-30 degrees, and irregular rock joints which are closer to natural joints were replicated by keeping the asperity angles of 15 degrees-30 degrees and 15 degrees-45 degrees. The sample size and amplitude of roughness were kept the same for both regular and irregular joints which were 298 mm x 298 mm x 125 mm and 5 mm, respectively. Shear test was performed on these joints using a large-scale direct shear testing machine by keeping the frequency and amplitude of shear load under constant cyclic condition with different normal stress values. As expected, the shear strength of rock joints increased with the increases in the asperity angle and normal load during the first cycle of shearing or static load. With the increase of the number of shear cycles, the shear strength decreased for all the asperity angles but the rate of reduction was more in case of high asperity angles. Test results indicated that shear strength of irregular joints was higher than that of regular joints at different cycles of shearing at low normal stress. Shearing and degradation of joint asperities on regular joints were the same between loading and unloading, but different for irregular joints. Shear strength and joint degradation were more significant on the slope of asperity with higher angles on the irregular joint until two angles of asperities became equal during the cycle of shearing and it started behaving like regular joints for subsequent cycles. (C) 2017 Institute of Rock and Soil Mechanics, Chinese Academy of Sciences. Production and hosting by Elsevier B.V.

作者

我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。

评论

主要评分

4.7
评分不足

次要评分

新颖性
-
重要性
-
科学严谨性
-
评价这篇论文

推荐

暂无数据
暂无数据