Acoustic Emission Characteristics of Sedimentary Rocks Under High-Velocity Waterjet Impingement

The success of waterjet drilling technology requires further insight into the rock failure mechanisms under waterjet impingement. By combining acoustic emission (AE) sensing and underwater sound recording techniques, an online system for monitoring submerged waterjet drilling has been developed. For four types of sedimentary rocks, their AE characteristics and correlations to the drilling performance have been obtained through time-frequency spectrum analysis. The area under the power spectrum density curve has been used as the indicator of AE energy. The results show that AE signals from the fluid dynamics and the rock failure are in different ranges of signal frequency. The main frequencies of the rock failure are within the higher range of 100-200 kHz, while the frequencies of the fluid dynamics are below 50 kHz. Further, there is a linear relationship between the AE energy and the drilling depth irrespective of rock type. The slope of the linear relationship is proportional to the rock strength and debris size. Furthermore, the AE-specific energy is a good indicator of the critical depth drilled by the waterjet. In conclusion, the AE characteristics on the power density and dominant frequency are capable of identifying the waterjet drilling performance on the rock materials and are correlated with the rock properties, i.e., rock strength and cutting size.