相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Development of double-side friction stir welding to improve post-welding formability of joints in AA6082 aluminium alloy
Michela Simoncini et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2016)
Mathematical modeling and optimization of friction stir welding process parameters in AA5083 and AA7075 aluminum alloy joints
M. Saeidi et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2016)
Mechanical and metallurgical properties of dissimilar AA6061-T6 and AA7277-T6 joint made by FSW technique
M. R. M. Aliha et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
A new distributed cooling method for mitigating residual stress in friction stir welding
Xingguo Zhou et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2016)
Investigations of tool tilt angle on properties friction stir welding of A441 AISI to AA1100 aluminium
Majid Elyasi et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2016)
Experimental investigation of underwater friction-stir welding of 5083 marine-grade aluminum alloy
Emad Eldin Kishta et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2016)
Influences of pin profile on the mechanical and microstructural behaviors in dissimilar friction stir welded AA6082-AA7075 butt Joint
Hamed Jamshidi Aval
MATERIALS & DESIGN (2015)
Friction stir welding joint of dissimilar materials between AZ31B magnesium and 6061 aluminum alloys: Microstructure studies and mechanical characterizations
J. Mohammadi et al.
MATERIALS CHARACTERIZATION (2015)
Dissimilar FSW of immiscible materials: Steel/magnesium
H. Kasai et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Fabrication and anti-oxidation properties of Al/Ti-6Al-4V bimetallic clad-sheet by multi-pass friction stir welding
Bo Li et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2015)
Effect of residual stress of friction stir welding on the fatigue life of AA 2024-T351 joint
Zhengwei Zhang et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2015)
Studying of tool rotation speed on mechanical properties of copper-Al5083 butt joint welded by friction stir welding
Hossein Bisadi et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2015)
Investigation of friction stir welding tool parameters using FEM and neural network
Mohammad Hasan Shojaeefard et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS (2015)
Friction stir welding of dissimilar materials between AA6061 and AA7075 Al alloys effects of process parameters
J. F. Guo et al.
MATERIALS & DESIGN (2014)
Mechanical and microstructural characterization of friction stir welded skin and stringer joints
Paola Leo et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2014)
Investigations for the effect of parameters on the weld performance of AA 5083-H111 joined by friction stir welding
Sefika Kasman et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2014)
Friction-stir welding of titanium/aluminum dissimilar alloys: Joint configuration design, as-welded interface characteristics and tensile properties
Zhenhua Zhang et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2014)
Effect of friction stir welding parameters on the mechanical properties and microstructure of the dissimilar Al5083-copper butt joint
Y. Fotoohi et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS (2014)
The influences of rotational and welding speeds on microstructures and mechanical properties of friction stir welded Al5083 and commercially pure copper sheets lap joints
H. Bisadi et al.
MATERIALS & DESIGN (2013)
Acoustic emission-based monitoring approach for friction stir welding of aluminum alloy AA6063-T6 with different tool pin profiles
Senthilkumar Subramaniam et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2013)
Formation and distribution of brittle structures in friction stir welding of aluminium and copper: Influence of shoulder geometry
I. Galvao et al.
INTERMETALLICS (2012)
Effect of tool rotational speed and pin profile on microstructure and tensile strength of dissimilar friction stir welded AA5083-H111 and AA6351-T6 aluminum alloys
R. Palanivel et al.
MATERIALS & DESIGN (2012)
Friction stir welding of dissimilar aluminum alloys AA2219 to AA5083-Optimization of process parameters using Taguchi technique
M. Koilraj et al.
MATERIALS & DESIGN (2012)
Friction stir welding parameters optimization of heterogeneous tailored welded blank sheets of aluminium alloys 6061 and 5083 using response surface methodology
Morteza Ghaffarpour et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2012)
Effect of friction stir welding parameters on the microstructure and mechanical properties of the dissimilar Al-Cu joints
P. Xue et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Assessment of the failure load for an AA6061-T6 friction stir spot welding joint
N-T Nguyen et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2011)
Enhanced mechanical properties of friction stir welded dissimilar Al-Cu joint by intermetallic compounds
P. Xue et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Mechanical, micro-, and macrostructural analysis of AA7075-T6 fabricated by friction stir butt welding with different rotational speeds and tool pin profiles
P. Bahemmat et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2010)
Optimization of the friction-stir-welding process and tool parameters to attain a maximum tensile strength of AA7075-T-6 aluminium alloy
S. Rajakumar et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2010)
Effect of fixed location variation in friction stir welding of steels with different carbon contents
D. -H. Choi et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2010)
Friction stir welding of dissimilar alloys - a perspective
T. DebRoy et al.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2010)
Microstructural and mechanical properties of friction stir welded aluminum/copper lap joints
A. Abdollah-Zadeh et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2008)
Microstructure and XRD analysis of FSW joints for copper T2/aluminium 5A06 dissimilar materials
Peng Liu et al.
MATERIALS LETTERS (2008)
Recent advances in friction-stir welding - Process, weldment structure and properties
R. Nandan et al.
PROGRESS IN MATERIALS SCIENCE (2008)
Joining of aluminum alloy to steel by friction stir welding
Takehiko Watanabe et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2006)
Parametric finite element analysis of stress evolution during friction stir welding
C. M. Chen et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2006)
AA6082-T6 friction stir welded joints fatigue resistance: influence of process parameters
A. Cirello et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2006)
Local mechanical and morphological characterization of friction stir-welded butt joints
M. Barletta et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2006)
Friction stir welding of AA6082-T6 T-joints: process engineering and performance measurement
L. Fratini et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2006)
Microstructural evolution in the friction stir welded 6061 aluminum alloy (T6-temper condition) to copper
JH Ouyang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2006)
Friction stir welding of dissimilar Al 6013-T4 To X5CrNi18-10 stainless steel
H Uzun et al.
MATERIALS & DESIGN (2005)
Feasibility study of friction stir welding of 6061-T6 aluminium alloy with AISI 1018 steel
WH Jiang et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2004)
An analytical model for the heat generation in friction stir welding
H Schmidt et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2004)
分享论文
