相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。The feasibility of printing polylactic acid-nanohydroxyapatite composites using a low-cost fused deposition modeling 3D printer
Carola Esposito Corcione et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2017)
Influence of inorganic fillers on PLA crystallinity and thermal properties
Elvira Vidovic et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2017)
Parametric optimization of intra- and inter-layer strengths in parts produced by extrusion-based additive manufacturing of poly(lactic acid)
Martin Spoerk et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2017)
Shrinkage and Warpage Optimization of Expanded-Perlite-Filled Polypropylene Composites in Extrusion-Based Additive Manufacturing
Martin Spoerk et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2017)
Bimodal molecular weight samples improve the isotropy of 3D printed polymeric samples
Neiko P. Levenhagen et al.
POLYMER (2017)
Effect of fused layer modeling (FLM) processing parameters on impact strength of cellular polypropylene
Lu Wang et al.
POLYMER (2017)
Improving the impact strength of Poly(lactic acid) (PLA) in fused layer modeling (FLM)
Lu Wang et al.
POLYMER (2017)
Fused deposition modelling with ABS-graphene nanocomposites
Sithiprumnea Dul et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Impact toughness of polypropylene/glass fiber composites: Interplay between intrinsic toughening and extrinsic toughening
Bowen Yu et al.
COMPOSITES PART B-ENGINEERING (2016)
Masthead-Copyright
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2016)
Additive Manufacturing of Poly(propylene) by Means of Melt Extrusion
Sebastian Hertle et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2016)
Efficient volumetric error compensation technique for additive manufacturing machines
Carlos Cajal et al.
RAPID PROTOTYPING JOURNAL (2016)
Investigating the influence of infill percentage on the mechanical properties of fused deposition modelled ABS parts
Kenny L. Alvarez C et al.
INGENIERIA E INVESTIGACION (2016)
Investigating the influence of infill percentage on the mechanical properties of fused deposition modelled ABS parts
Kenny L. Alvarez C et al.
INGENIERIA E INVESTIGACION (2016)
Mechanical behaviour of ABS: An experimental study using FDM and injection moulding techniques
Michael Dawoud et al.
JOURNAL OF MANUFACTURING PROCESSES (2016)
Impact absorption capacity of 3D-printed components fabricated by fused deposition modelling
A. Tsouknidas et al.
MATERIALS & DESIGN (2016)
Orthotropic mechanical properties of fused deposition modelling parts described by classical laminate theory
Caterina Casavola et al.
MATERIALS & DESIGN (2016)
Mechanical and thermal properties of ABS/montmorillonite nanocomposites for fused deposition modeling 3D printing
Zixiang Weng et al.
MATERIALS & DESIGN (2016)
Infrared thermography of welding zones produced by polymer extrusion additive manufacturing
Jonathan E. Seppala et al.
ADDITIVE MANUFACTURING (2016)
Experimental analysis of an extrusion system for additive manufacturing based on polymer pellets
N. Volpato et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Economic implications of 3D printing: Market structure models in light of additive manufacturing revisited
Christian Weller et al.
INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS (2015)
Fabrication and Microstructural Characterization of Functionally Graded Porous Acrylonitrile Butadiene Styrene and the Effect of Cellular Morphology on Creep Behavior
Farooq Al Jahwari et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2015)
Viscosity-induced filler localisation in immiscible polymer blends
Julien Plattier et al.
POLYMER (2015)
Fused deposition modeling with polypropylene
O. S. Carneiro et al.
MATERIALS & DESIGN (2015)
Structure and properties of a β-nucleated polypropylene impact copolymer
Teboho S. Motsoeneng et al.
POLYMER INTERNATIONAL (2015)
Characterizing the effect of additives to ABS on the mechanical property anisotropy of specimens fabricated by material extrusion 3D printing
Angel R. Torrado et al.
ADDITIVE MANUFACTURING (2015)
Effect of Filler Content on the Performance of Epoxy/PTW Composites
Mudradi Sudheer et al.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2014)
The influence of talc as a nucleation agent on the nonisothermal crystallization and morphology of isotactic polypropylene: The application of the Lauritzen-Hoffmann, Avrami, and Ozawa theories
Nikola Kocic et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2012)
Rheological behaviors of glass bead- and wollastonite-filled polypropylene composites modified with thermoplastic elastomers
Onur Balkan et al.
POLYMER COMPOSITES (2012)
Effect of maleic anhydride grafted polypropylene compatibilizer on the morphology and properties of polypropylene/multiwalled carbon nanotube composite
G. S. Ezat et al.
POLYMER COMPOSITES (2012)
Thermo-mechanical properties of a highly filled polymeric composites for Fused Deposition Modeling
M. Nikzad et al.
MATERIALS & DESIGN (2011)
Parametric appraisal of mechanical property of fused deposition modelling processed parts
Anoop Kumar Sood et al.
MATERIALS & DESIGN (2010)
A quantitative method for measuring nanocomposite dispersion
H. S. Khare et al.
POLYMER (2010)
Effect of Glass Bead Content and Diameter on Shrinkage and Warpage of Injection-Molded PA6
J. G. Kovacs et al.
POLYMER ENGINEERING AND SCIENCE (2009)
Prediction of impact-induced delamination in cross-ply composite laminates using cohesive interface elements
F. Aymerich et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2008)
Melt rheology of polypropylene reinforced with polyaniline-coated short glass fibers
Maria Eugenia Romero-Guzman et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2008)
The rheological, thermal, and mechanical properties for polypropylene and amorphous poly alpha olefin blends
H. S. Ha et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2008)
Quantifying the dispersion of mixture microstructures
Z. P. Luo et al.
JOURNAL OF MICROSCOPY-OXFORD (2007)
Effects of reinforcement filler and temperature on the stability of β-crystal in glass bead filled polypropylene
Q Yuan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Dynamic mixed-mode I/II delamination fracture and energy release rate of unidirectional graphite/epoxy composites
SN Wosu et al.
ENGINEERING FRACTURE MECHANICS (2005)
Effects of filler size and heat treatment on the crystallization behavior of glass bead-filled polypropylene
QN Yuan et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2005)
The mechanical and thermal behaviors of glass bead filled polypropylene
Q Yuan et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2004)
Development of new metal/polymer materials for rapid tooling using Fused deposition modelling
SH Masood et al.
MATERIALS & DESIGN (2004)
Stiffness and toughness of polypropylene/glass bead composites
KW Kwok et al.
POLYMER COMPOSITES (2003)
The effect of morphology of ternary-phase polypropylene/glass bead/ethylene-propylene rubber composites on the toughness and brittle-ductile transition
IL Dubnikova et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2002)
Toughening and reinforcing in rigid inorganic particulate filled poly(propylene): A review
JZ Liang
JOURNAL OF APPLIED POLYMER SCIENCE (2002)
Development of an isothermal lubricating layer model for injection pultrusion of electronic prepregs
R Hogade et al.
POLYMER COMPOSITES (2002)
Use of silane agents and poly(propylene-g-maleic anhydride) copolymer as adhesion promoters in glass fiber/polypropylene composites
D Bikiaris et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2001)
Effect of filler addition on the compressive and impact properties of glass fibre reinforced epoxy
N Gupta et al.
BULLETIN OF MATERIALS SCIENCE (2001)
Effect of layer orientation on mechanical properties of rapid prototyped samples
OS Es-Said et al.
MATERIALS AND MANUFACTURING PROCESSES (2000)
Impact fracture behavior of PP/EPDM/glass bead ternary composites
JZ Liang et al.
POLYMER ENGINEERING AND SCIENCE (2000)
Effects of glass bead size and content on the viscoelasticity of filled polypropylene composites
JZ Liang et al.
POLYMER TESTING (2000)
分享论文
