相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Ultrathin Atomic Layer Deposited TiO2 for Surface Passivation of Hydrothermally Grown 1D TiO2 Nanorod Arrays for Efficient Solid-State Perovskite Solar Cells
Sawanta S. Mali et al.
CHEMISTRY OF MATERIALS (2015)
Highly efficient and bending durable perovskite solar cells: toward a wearable power source
Byeong Jo Kim et al.
ENERGY & ENVIRONMENTAL SCIENCE (2015)
Efficiency enhancement of planar perovskite solar cells by adding zwitterion/LiF double interlayers for electron collection
Kuan Sun et al.
NANOSCALE (2015)
The roles of alkyl halide additives in enhancing perovskite solar cell performance
Chu-Chen Chueh et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
High-Performance and Environmentally Stable Planar Heterojunction Perovskite Solar Cells Based on a Solution-Processed Copper-Doped Nickel Oxide Hole-Transporting Layer
Jong H. Kim et al.
ADVANCED MATERIALS (2015)
Interface Engineering of Perovskite Hybrid Solar Cells with Solution-Processed Perylene-Diimide Heterojunctions toward High Performance
Jie Min et al.
CHEMISTRY OF MATERIALS (2015)
High-Performance Planar-Heterojunction Solar Cells Based on Ternary Halide Large-Band-Gap Perovskites
Po-Wei Liang et al.
ADVANCED ENERGY MATERIALS (2015)
Enhanced Environmental Stability of Planar Heterojunction Perovskite Solar Cells Based on Blade-Coating
Jong H. Kim et al.
ADVANCED ENERGY MATERIALS (2015)
Printable Highly Conductive Conjugated Polymer Sensitized ZnO NCs as Cathode Interfacial Layer for Efficient Polymer Solar Cells
Jian Liu et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Conductive Water/Alcohol-Soluble Neutral Fullerene Derivative as an Interfacial Layer for Inverted Polymer Solar Cells with High Efficiency
Chao Yi et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Influence of the Ionic Functionalities of Polyfluorene Derivatives as a Cathode Interfacial Layer on Inverted Polymer Solar Cells
Rira Kang et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Low-Temperature Sputtered Nickel Oxide Compact Thin Film as Effective Electron Blocking Layer for Mesoscopic NiO/CH3NH3PbI3 Perovskite Heterojunction Solar Cells
Kuo-Chin Wang et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Design Considerations for Electrode Buffer Layer Materials in Polymer Solar Cells
David Bilby et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Application of Biuret, Dicyandiamide, or Urea as a Cathode Buffer Layer toward the Efficiency Enhancement of Polymer Solar Cells
Xuemei Zhao et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
A Benzodithiophene-Based Novel Electron Transport Layer for a Highly Efficient Polymer Solar Cell
Hong Il Kim et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Highly Efficient Inverted Polymer Solar Cells Based on a Cross-linkable Water-/Alcohol-Soluble Conjugated Polymer Interlayer
Kai Zhang et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Organic Dipole Layers for Ultralow Work Function Electrodes
William E. Ford et al.
ACS NANO (2014)
Heterojunction Modification for Highly Efficient Organic - Inorganic Perovskite Solar Cells
Konrad Wojciechowski et al.
ACS NANO (2014)
Enhanced Photoluminescence and Solar Cell Performance via Lewis Base Passivation of Organic Inorganic Lead Halide Perovskites
Nakita K. Noel et al.
ACS NANO (2014)
Role of Chloride in the Morphological Evolution of Organo-Lead Halide Perovskite Thin Films
Spencer T. Williams et al.
ACS NANO (2014)
Au@Ag Core-Shell Nanocubes for Efficient Plasmonic Light Scattering Effect in Low Bandgap Organic Solar Cells
Se-Woong Baek et al.
ACS NANO (2014)
Low-Temperature Solution-Processed Perovskite Solar Cells with High Efficiency and Flexibility
Jingbi You et al.
ACS NANO (2014)
Multi-Charged Conjugated Polyelectrolytes as a Versatile Work Function Modifier for Organic Electronic Devices
Byoung Hoon Lee et al.
ADVANCED FUNCTIONAL MATERIALS (2014)
8.91% Power Conversion Efficiency for Polymer Tandem Solar Cells
Abd Rashid bin Mohd Yusoff et al.
ADVANCED FUNCTIONAL MATERIALS (2014)
Enhancing Photovoltaic Performance Using an All-Conjugated Random Copolymer to Tailor Bulk and Interfacial Morphology of the P3HT:ICBA Active Layer
Anton Li et al.
ADVANCED FUNCTIONAL MATERIALS (2014)
Over 1.1 eV Workfunction Tuning of Cesium Intercalated Metal Oxides for Functioning as Both Electron and Hole Transport Layers in Organic Optoelectronic Devices
Xinchen Li et al.
ADVANCED FUNCTIONAL MATERIALS (2014)
Performance and Stability Enhancement of Dye-Sensitized and Perovskite Solar Cells by Al Doping of TiO2
Sandeep K. Pathak et al.
ADVANCED FUNCTIONAL MATERIALS (2014)
Polyfluorene Derivatives are High-Performance Organic Hole-Transporting Materials for Inorganic-Organic Hybrid Perovskite Solar Cells
Zonglong Zhu et al.
ADVANCED FUNCTIONAL MATERIALS (2014)
Chemically Controlled Reversible and Irreversible Extraction Barriers Via Stable Interface Modification of Zinc Oxide Electron Collection Layer in Polycarbazole-based Organic Solar Cells
Sarah R. Cowan et al.
ADVANCED FUNCTIONAL MATERIALS (2014)
Graphene Oxide Nanoribbon as Hole Extraction Layer to Enhance Efficiency and Stability of Polymer Solar Cells
Jun Liu et al.
ADVANCED MATERIALS (2014)
Conductive Conjugated Polyelectrolyte as Hole-Transporting Layer for Organic Bulk Heterojunction Solar Cells
Huiqiong Zhou et al.
ADVANCED MATERIALS (2014)
Carbazole-Based Hole-Transport Materials for Efficient Solid-State Dye-Sensitized Solar Cells and Perovskite Solar Cells
Bo Xu et al.
ADVANCED MATERIALS (2014)
Nickel Oxide Electrode Interlayer in CH3NH3PbI3 Perovskite/PCBM Planar-Heterojunction Hybrid Solar Cells
Jun-Yuan Jeng et al.
ADVANCED MATERIALS (2014)
Additive Enhanced Crystallization of Solution-Processed Perovskite for Highly Efficient Planar-Heterojunction Solar Cells
Po-Wei Liang et al.
ADVANCED MATERIALS (2014)
Strong Photocurrent Enhancements in Highly Efficient Flexible Organic Solar Cells by Adopting a Microcavity Configuration
Kung-Shih Chen et al.
ADVANCED MATERIALS (2014)
Binary-Metal Perovskites Toward High-Performance Planar-Heterojunction Hybrid Solar Cells
Fan Zuo et al.
ADVANCED MATERIALS (2014)
Hybrid Graphene-Metal Oxide Solution Processed Electron Transport Layers for Large Area High-Performance Organic Photovoltaics
Michail J. Beliatis et al.
ADVANCED MATERIALS (2014)
Microcavity-Enhanced Light-Trapping for Highly Efficient Organic Parallel Tandem Solar Cells
Lijian Zuo et al.
ADVANCED MATERIALS (2014)
Enhanced Photovoltaic Performance by Modulating Surface Composition in Bulk Heterojunction Polymer Solar Cells Based on PBDTTT-C-T/PC71BM
Xia Guo et al.
ADVANCED MATERIALS (2014)
Metal/Semiconductor Hybrid Nanostructures for Plasmon-Enhanced Applications
Ruibin Jiang et al.
ADVANCED MATERIALS (2014)
An Efficient Triple-Junction Polymer Solar Cell Having a Power Conversion Efficiency Exceeding 11%
Chun-Chao Chen et al.
ADVANCED MATERIALS (2014)
Boosting the Power Conversion Efficiency of Perovskite Solar Cells Using Self-Organized Polymeric Hole Extraction Layers with High Work Function
Kyung-Geun Lim et al.
ADVANCED MATERIALS (2014)
Suppressed Charge Recombination in Inverted Organic Photovoltaics via Enhanced Charge Extraction by Using a Conductive Fullerene Electron Transport Layer
Chang-Zhi Li et al.
ADVANCED MATERIALS (2014)
High-Efficiency Perovskite Solar Cells Based on the Black Polymorph of HC(NH2)2PbI3
Jin-Wook Lee et al.
ADVANCED MATERIALS (2014)
Interfacial Engineering of Ultrathin Metal Film Transparent Electrode for Flexible Organic Photovoltaic Cells
Jingyu Zou et al.
ADVANCED MATERIALS (2014)
Mixed-Organic-Cation Perovskite Photovoltaics for Enhanced Solar-Light Harvesting
Norman Pellet et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2014)
14.8% perovskite solar cells employing carbazole derivatives as hole transporting materials
Sang Do Sung et al.
CHEMICAL COMMUNICATIONS (2014)
Transparent Conducting Oxides of Relevance to Organic Electronics: Electronic Structures of Their Interfaces with Organic Layers
Hong Li et al.
CHEMISTRY OF MATERIALS (2014)
Improved High-Efficiency Perovskite Planar Heterojunction Solar Cells via Incorporation of a Polyelectrolyte Interlayer
Hong Zhang et al.
CHEMISTRY OF MATERIALS (2014)
Controlled Synthesis of Water-Soluble Conjugated Polyelectrolytes Leading to Excellent Hole Transport Mobility
Johannes C. Brendel et al.
CHEMISTRY OF MATERIALS (2014)
Thieno[3,2-b]thiophene-Substituted Benzo[1,2-b:4,5-b′]dithiophene as a Promising Building Block for Low Bandgap Semiconducting Polymers for High-Performance Single and Tandem Organic Photovoltaic Cells
Ji-Hoon Kim et al.
CHEMISTRY OF MATERIALS (2014)
Perylene diimides: a thickness-insensitive cathode interlayer for high performance polymer solar cells
Zhi-Guo Zhang et al.
ENERGY & ENVIRONMENTAL SCIENCE (2014)
Applications of functional fullerene materials in polymer solar cells
Yu-Ying Lai et al.
ENERGY & ENVIRONMENTAL SCIENCE (2014)
Lead-free organic-inorganic tin halide perovskites for photovoltaic applications
Nakita K. Noel et al.
ENERGY & ENVIRONMENTAL SCIENCE (2014)
A diketopyrrolopyrrole-containing hole transporting conjugated polymer for use in efficient stable organic-inorganic hybrid solar cells based on a perovskite
Young Soo Kwon et al.
ENERGY & ENVIRONMENTAL SCIENCE (2014)
Flexible high efficiency perovskite solar cells
Cristina Roldan-Carmona et al.
ENERGY & ENVIRONMENTAL SCIENCE (2014)
Scalable, ambient atmosphere roll-to-roll manufacture of encapsulated large area, flexible organic tandem solar cell modules
Thomas R. Andersen et al.
ENERGY & ENVIRONMENTAL SCIENCE (2014)
Multi-film roll transferring (MRT) process using highly conductive and solution-processed silver solution for fully solution-processed polymer solar cells
Hongseok Youn et al.
ENERGY & ENVIRONMENTAL SCIENCE (2014)
Sub-150 °C processed meso-superstructured perovskite solar cells with enhanced efficiency
Konrad Wojciechowski et al.
ENERGY & ENVIRONMENTAL SCIENCE (2014)
Graphene oxide derivatives as hole- and electron-extraction layers for high-performance polymer solar cells
Jun Liu et al.
ENERGY & ENVIRONMENTAL SCIENCE (2014)
A dopant-free hole-transporting material for efficient and stable perovskite solar cells
Jian Liu et al.
ENERGY & ENVIRONMENTAL SCIENCE (2014)
Efficient, high yield perovskite photovoltaic devices grown by interdiffusion of solution-processed precursor stacking layers
Zhengguo Xiao et al.
ENERGY & ENVIRONMENTAL SCIENCE (2014)
Formamidinium lead trihalide: a broadly tunable perovskite for efficient planar heterojunction solar cells
Giles E. Eperon et al.
ENERGY & ENVIRONMENTAL SCIENCE (2014)
Organolead Halide Perovskite: New Horizons in Solar Cell Research
Hui-Seon Kim et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2014)
Solution-Processed and Low-Temperature Annealed CrOx as Anode Buffer Layer for Efficient Polymer Solar Cells
Xiaohe Tu et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2014)
CH3NH3SnxPb(1-x)I3 Perovskite Solar Cells Covering up to 1060 nm
Yuhei Ogomi et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2014)
Recombination Study of Combined Halides (Cl, Br, I) Perovskite Solar Cells
Belen Suarez et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2014)
Anomalous Hysteresis in Perovskite Solar Cells
Henry J. Snaith et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2014)
Parameters Affecting I-V Hysteresis of CH3NH3PbI3 Perovskite Solar Cells: Effects of Perovskite Crystal Size and Mesoporous TiO2 Layer
Hui-Seon Kim et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2014)
An Inorganic Hole Conductor for Organo-Lead Halide Perovskite Solar Cells. Improved Hole Conductivity with Copper Iodide
Jeffrey A. Christians et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)
Crystallization of Methyl Ammonium Lead Halide Perovskites: Implications for Photovoltaic Applications
Yaron Tidhar et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)
Enhancing the Hole-Conductivity of Spiro-OMeTAD without Oxygen or Lithium Salts by Using Spiro(TFSI)2 in Perovskite and Dye-Sensitized Solar Cells
William H. Nguyen et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)
o-Methoxy Substituents in Spiro-OMeTAD for Efficient Inorganic-Organic Hybrid Perovskite Solar Cells
Nam Joong Jeon et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)
Azulene Methacrylate Polymers: Synthesis, Electronic Properties, and Solar Cell Fabrication
Egle Puodziukynaite et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)
Efficient Planar Perovskite Solar Cells Based on 1.8 eV Band Gap CH3NH3PbI2Br Nanosheets via Thermal Decomposition
Yixin Zhao et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)
Perovskite Solar Cells with 12.8% Efficiency by Using Conjugated Quinolizino Acridine Based Hole Transporting Material
Peng Qin et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)
Anomalous Band Gap Behavior in Mixed Sn and Pb Perovskites Enables Broadening of Absorption Spectrum in Solar Cells
Feng Hao et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)
Efficiency Enhancement of Perovskite Solar Cells through Fast Electron Extraction: The Role of Graphene Quantum Dots
Zonglong Zhu et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2014)
Phosphonate-Functionalized Donor Polymer as an Underlying Interlayer To Improve Active Layer Morphology in Polymer Solar Cells
Bin Meng et al.
MACROMOLECULES (2014)
Carbon Nanotube/Polymer Composites as a Highly Stable Hole Collection Layer in Perovskite Solar Cells
Severin N. Habisreutinger et al.
NANO LETTERS (2014)
Nanocrystalline Rutile Electron Extraction Layer Enables Low-Temperature Solution Processed Perovskite Photovoltaics with 13.7% Efficiency
Aswani Yella et al.
NANO LETTERS (2014)
Graphene Oxide-Based Carbon Interconnecting Layer for Polymer Tandem Solar Cells
Yonghua Chen et al.
NANO LETTERS (2014)
New Insights into Morphology of High Performance BHJ Photovoltaics Revealed by High Resolution AFM
Dong Wang et al.
NANO LETTERS (2014)
Supramolecular Halogen Bond Passivation of Organic-Inorganic Halide Perovskite Solar Cells
Antonio Abate et al.
NANO LETTERS (2014)
Plasmonic nanostructures for light trapping in organic photovoltaic devices
Chun-Hsien Chou et al.
NANOSCALE (2014)
Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells
Nam Joong Jeon et al.
NATURE MATERIALS (2014)
Utrathin PV Device is Highly Efficient
[Anonymous]
PHOTONICS SPECTRA (2014)
Perovskite solar cells with a planar heterojunction structure prepared using room-temperature solution processing techniques
Dianyi Liu et al.
NATURE PHOTONICS (2014)
Lead-free solid-state organic-inorganic halide perovskite solar cells
Feng Hao et al.
NATURE PHOTONICS (2014)
Charge separation energetics at organic heterojunctions: on the role of structural and electrostatic disorder
Frederic Castet et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2014)
Charge generation in polymer-fullerene bulk-heterojunction solar cells
Feng Gao et al.
PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2014)
Fulleropyrrolidine interlayers: Tailoring electrodes to raise organic solar cell efficiency
Zachariah A. Page et al.
SCIENCE (2014)
Interface engineering of highly efficient perovskite solar cells
Huanping Zhou et al.
SCIENCE (2014)
Origin and elimination of photocurrent hysteresis by fullerene passivation in CH3NH3PbI3 planar heterojunction solar cells
Yuchuan Shao et al.
NATURE COMMUNICATIONS (2014)
Solution-Processed Rhenium Oxide: A Versatile Anode Buffer Layer for High Performance Polymer Solar Cells with Enhanced Light Harvest
Zhan'ao Tan et al.
ADVANCED ENERGY MATERIALS (2014)
Highly Efficient Polymer Tandem Cells and Semitransparent Cells for Solar Energy
Chih-Yu Chang et al.
ADVANCED ENERGY MATERIALS (2014)
A Depletion-Free, Ionic, Self-Assembled Recombination Layer for Tandem Polymer Solar Cells
Jinho Lee et al.
ADVANCED ENERGY MATERIALS (2014)
Improved Performance in Bulk Heterojunction Organic Solar Cells with a Sol-Gel MgZnO Electron-Collecting Layer
Bradley A. MacLeod et al.
ADVANCED ENERGY MATERIALS (2014)
Contact Doping with Sub-Monolayers of Strong Polyelectrolytes for Organic Photovoltaics
Gopal K. Mor et al.
ADVANCED ENERGY MATERIALS (2014)
Inverted Tandem Polymer Solar Cells with Polyethylenimine-Modified MoOX/Al2O3:ZnO Nanolaminate as the Charge Recombination Layers
Jae Won Shim et al.
ADVANCED ENERGY MATERIALS (2014)
Improving Cathodes with a Polymer Interlayer in Reversed Organic Solar Cells
Zheng Tang et al.
ADVANCED ENERGY MATERIALS (2014)
Morphological Control for Highly Efficient Inverted Polymer Solar Cells Via the Backbone Design of Cathode Interlayer Materials
Wenjun Zhang et al.
ADVANCED ENERGY MATERIALS (2014)
Bandgap Tunable Zn1-xMgxO Thin Films as Highly Transparent Cathode Buffer Layers for High-Performance Inverted Polymer Solar Cells
Zhigang Yin et al.
ADVANCED ENERGY MATERIALS (2014)
A General Route to Enhance Polymer Solar Cell Performance using Plasmonic Nanoprisms
Kai Yao et al.
ADVANCED ENERGY MATERIALS (2014)
8.9% Single-Stack Inverted Polymer Solar Cells with Electron-Rich Polymer Nanolayer-Modified Inorganic Electron-Collecting Buffer Layers
Sungho Woo et al.
ADVANCED ENERGY MATERIALS (2014)
Low-temperature processed high-performance flexible perovskite solar cells via rationally optimized solvent washing treatments
Jae Woong Jung et al.
RSC ADVANCES (2014)
p-type Mesoscopic Nickel Oxide/Organometallic Perovskite Heterojunction Solar Cells
Kuo-Chin Wang et al.
SCIENTIFIC REPORTS (2014)
Effect of metal/bulk-heterojunction interfacial properties on organic photovoltaic device performance
Jian Wang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2014)
Efficient polymer solar cells with a solution-processed and thermal annealing-free RuO2 anode buffer layer
Fuzhi Wang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2014)
Self n-doped [6,6]-phenyl-C61-butyric acid 2-((2-(trimethylammonium)ethyl)-(dimethyl)ammonium)ethyl ester diiodides as a cathode interlayer for inverted polymer solar cells
Weixiang Jiao et al.
JOURNAL OF MATERIALS CHEMISTRY A (2014)
Highly efficient fullerene/perovskite planar heterojunction solar cells via cathode modification with an amino-functionalized polymer interlayer
Qifan Xue et al.
JOURNAL OF MATERIALS CHEMISTRY A (2014)
Planar heterojunction perovskite/PC71BM solar cells with enhanced open-circuit voltage via a (2/1)-step spin-coating process
Chien-Hung Chiang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2014)
Self-assembled buffer layer from conjugated diblock copolymers with ethyleneoxide side chains for high efficiency polymer solar cells
Yueqin Shi et al.
JOURNAL OF MATERIALS CHEMISTRY C (2014)
Efficient and stable polymer solar cells with annealing-free solution-processible NiO nanoparticles as anode buffer layers
Jun Zhang et al.
JOURNAL OF MATERIALS CHEMISTRY C (2014)
Origin of Work Function Modification by Ionic and Amine-Based Interface Layers
Stephan van Reenen et al.
ADVANCED MATERIALS INTERFACES (2014)
Physically Adsorbed Fullerene Layer on Positively Charged Sites on Zinc Oxide Cathode Affords Efficiency Enhancement in Inverted Polymer Solar Cell
Yu-Shan Cheng et al.
ACS APPLIED MATERIALS & INTERFACES (2013)
Solution-Processed Fe3O4 Magnetic Nanoparticle Thin Film Aligned by an External Magnetostatic Field as a Hole Extraction Layer for Polymer Solar Cells
Kai Wang et al.
ACS APPLIED MATERIALS & INTERFACES (2013)
Interface Engineering to Enhance the Efficiency of Conventional Polymer Solar Cells by Alcohol-/Water-Soluble C60 Materials Doped with Alkali Carbonates
Yu-Ying Lai et al.
ACS APPLIED MATERIALS & INTERFACES (2013)
Systematic Investigation of Organic Photovoltaic Cell Charge Injection/Performance Modulation by Dipolar Organosilane Interfacial Layers
Charles Kiseok Song et al.
ACS APPLIED MATERIALS & INTERFACES (2013)
Solution-Processed Hybrid Cathode Interlayer for Inverted Organic Solar Cells
Yulei Wu et al.
ACS APPLIED MATERIALS & INTERFACES (2013)
Enhancing the Performance of Polymer Photovoltaic Cells by Using an Alcohol Soluble Fullerene Derivative as the Interfacial Layer
Qiang Mei et al.
ACS APPLIED MATERIALS & INTERFACES (2013)
Development of Inverted Organic Solar Cells with TiO2 Interface Layer by Using Low-Temperature Atomic Layer Deposition
Zhenhua Lin et al.
ACS APPLIED MATERIALS & INTERFACES (2013)
High-Performance Polymer Solar Cells with Solution-Processed and Environmentally Friendly CuOx Anode Buffer Layer
Qi Xu et al.
ACS APPLIED MATERIALS & INTERFACES (2013)
Noncovalent Functionalization of Graphene Attaching [6,6]-Phenyl-C61-butyric Acid Methyl Ester (PCBM) and Application as Electron Extraction Layer of Polymer Solar Cells
Shuxuan Qu et al.
ACS NANO (2013)
Efficiency Enhancement of Organic Solar Cells by Using Shape-Dependent Broadband Plasmonic Absorption in Metallic Nanoparticles
Xuanhua Li et al.
ADVANCED FUNCTIONAL MATERIALS (2013)
Solution-Processed Nickel Oxide Hole Transport Layers in High Efficiency Polymer Photovoltaic Cells
Jesse R. Manders et al.
ADVANCED FUNCTIONAL MATERIALS (2013)
A Versatile Fluoro-Containing Low-Bandgap Polymer for Efficient Semitransparent and Tandem Polymer Solar Cells
Chih-Yu Chang et al.
ADVANCED FUNCTIONAL MATERIALS (2013)
\Doping of Fullerenes via Anion-Induced Electron Transfer and Its Implication for Surfactant Facilitated High Performance Polymer Solar Cells
Chang-Zhi Li et al.
ADVANCED MATERIALS (2013)
25th Anniversary Article: A Decade of Organic/Polymeric Photovoltaic Research
Letian Dou et al.
ADVANCED MATERIALS (2013)
A Hyperbranched Conjugated Polymer as the Cathode Interlayer for High-Performance Polymer Solar Cells
Menglan Lv et al.
ADVANCED MATERIALS (2013)
Conjugated Polymeric Zwitterions as Efficient Interlayers in Organic Solar Cells
Feng Liu et al.
ADVANCED MATERIALS (2013)
Plasmonic-Enhanced Organic Photovoltaics: Breaking the 10% Efficiency Barrier
Qiaoqiang Gan et al.
ADVANCED MATERIALS (2013)
Solution-Processible Highly Conducting Fullerenes
Chang-Zhi Li et al.
ADVANCED MATERIALS (2013)
Low-Temperature Solution-Processed Hydrogen Molybdenum and Vanadium Bronzes for an Efficient Hole-Transport Layer in Organic Electronics
Fengxian Xie et al.
ADVANCED MATERIALS (2013)
CH3NH3PbI3 Perovskite/Fullerene Planar-Heterojunction Hybrid Solar Cells
Jun-Yuan Jeng et al.
ADVANCED MATERIALS (2013)
Fullerene Derivative-Doped Zinc Oxide Nanofilm as the Cathode of Inverted Polymer Solar Cells with Low-Bandgap Polymer (PTB7-Th) for High Performance
Sih-Hao Liao et al.
ADVANCED MATERIALS (2013)
Facile Doping of Anionic Narrow-Band-Gap Conjugated Polyelectrolytes During Dialysis
Cheng-Kang Mai et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2013)
Poly(ethylene glycol) modified [60]fullerene as electron buffer layer for high-performance polymer solar cells
Zhi-Guo Zhang et al.
APPLIED PHYSICS LETTERS (2013)
Recent advances in water/alcohol-soluble π-conjugated materials: new materials and growing applications in solar cells
Chunhui Duan et al.
CHEMICAL SOCIETY REVIEWS (2013)
Low-temperature, solution-processed, layered V2O5 hydrate as the hole-transport layer for stable organic solar cells
Gerardo Teran-Escobar et al.
ENERGY & ENVIRONMENTAL SCIENCE (2013)
Highly efficient plasmonic organic optoelectronic devices based on a conducting polymer electrode incorporated with silver nanoparticles
Seo-Jin Ko et al.
ENERGY & ENVIRONMENTAL SCIENCE (2013)
Towards 15% energy conversion efficiency: a systematic study of the solution-processed organic tandem solar cells based on commercially available materials
Ning Li et al.
ENERGY & ENVIRONMENTAL SCIENCE (2013)
Highly efficient organic tandem solar cells: a follow up review
Tayebeh Ameri et al.
ENERGY & ENVIRONMENTAL SCIENCE (2013)
Non-halogenated solvents for environmentally friendly processing of high-performance bulk-heterojunction polymer solar cells
Chu-Chen Chueh et al.
ENERGY & ENVIRONMENTAL SCIENCE (2013)
Toward green solvent processable photovoltaic materials for polymer solar cells: the role of highly polar pendant groups in charge carrier transport and photovoltaic behavior
Chunhui Duan et al.
ENERGY & ENVIRONMENTAL SCIENCE (2013)
Low-temperature processed meso-superstructured to thin-film perovskite solar cells
James M. Ball et al.
ENERGY & ENVIRONMENTAL SCIENCE (2013)
Electrostatic Self-Assembled Metal Oxide/Conjugated Polyelectrolytes as Electron-Transporting Layers for Inverted Solar Cells with High Efficiency
Chen Xie et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2013)
ITO Interface Modifiers Can Improve VOC in Polymer Solar Cells and Suppress Surface Recombination
Kristina M. Knesting et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2013)
Pushing the Envelope of the Intrinsic Limitation of Organic Solar Cells
Nadia Camaioni et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2013)
Efficient Tandem and Triple-Junction Polymer Solar Cells
Weiwei Li et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)
High-Efficiency Polymer Solar Cells via the Incorporation of an Amino-Functionalized Conjugated Metallopolymer as a Cathode Interlayer
Shengjian Liu et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)
Linear Side Chains in Benzo[1,2-b:4,5-b′]dithiophene-Thieno[3,4-c]pyrrole-4,6-dione Polymers Direct Self-Assembly and Solar Cell Performance
Clement Cabanetos et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)
Novel Cathode Interlayers Based on Neutral Alcohol-Soluble Small Molecules with a Triphenylamine Core Featuring Polar Phosphonate Side Chains for High-Performance Polymer Light-Emitting and Photovoltaic Devices
Dongcheng Chen et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2013)
Cooperative Plasmonic Effect of Ag and Au Nanoparticles on Enhancing Performance of Polymer Solar Cells
Luyao Lu et al.
NANO LETTERS (2013)
Improved Light Harvesting and Improved Efficiency by Insertion of an Optical Spacer (ZnO) in Solution-Processed Small-Molecule Solar Cells
Aung Ko Ko Kyaw et al.
NANO LETTERS (2013)
High-Performance Perovskite-Polymer Hybrid Solar Cells via Electronic Coupling with Fullerene Monolayers
Agnese Abrusci et al.
NANO LETTERS (2013)
Multipositional Silica-Coated Silver Nanoparticles for High-Performance Polymer Solar Cells
Hyosung Choi et al.
NANO LETTERS (2013)
Chemical Management for Colorful, Efficient, and Stable Inorganic-Organic Hybrid Nanostructured Solar Cells
Jun Hong Noh et al.
NANO LETTERS (2013)
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Julian Burschka et al.
NATURE (2013)
Additives for morphology control in high-efficiency organic solar cells
Hsueh-Chung Liao et al.
MATERIALS TODAY (2013)
Versatile surface plasmon resonance of carbon-dot-supported silver nanoparticles in polymer optoelectronic devices
Hyosung Choi et al.
NATURE PHOTONICS (2013)
Efficient inorganic-organic hybrid heterojunction solar cells containing perovskite compound and polymeric hole conductors
Jin Hyuck Heo et al.
NATURE PHOTONICS (2013)
Polymer solar cells with enhanced fill factors
Xugang Guo et al.
NATURE PHOTONICS (2013)
Acid-functionalized fullerenes used as interfacial layer materials in inverted polymer solar cells
Hyosung Choi et al.
ORGANIC ELECTRONICS (2013)
Optimization of thermally reduced graphene oxide for an efficient hole transport layer in polymer solar cells
Xiaodong Liu et al.
ORGANIC ELECTRONICS (2013)
Designing π-conjugated polymers for organic electronics
Xin Guo et al.
PROGRESS IN POLYMER SCIENCE (2013)
Recent trends in polymer tandem solar cells research
Jingbi You et al.
PROGRESS IN POLYMER SCIENCE (2013)
Efficiency of bulk-heterojunction organic solar cells
M. C. Scharber et al.
PROGRESS IN POLYMER SCIENCE (2013)
Electron-Hole Diffusion Lengths Exceeding 1 Micrometer in an Organometal Trihalide Perovskite Absorber
Samuel D. Stranks et al.
SCIENCE (2013)
Conjugated zwitterionic polyelectrolyte-based interface modification materials for high performance polymer optoelectronic devices
Chunhui Duan et al.
CHEMICAL SCIENCE (2013)
A polymer tandem solar cell with 10.6% power conversion efficiency
Jingbi You et al.
NATURE COMMUNICATIONS (2013)
Toward High-Performance Semi-Transparent Polymer Solar Cells: Optimization of Ultra-Thin Light Absorbing Layer and Transparent Cathode Architecture
Chu-Chen Chueh et al.
ADVANCED ENERGY MATERIALS (2013)
Plasmonic Efficiency Enhancement of High Performance Organic Solar Cells with a Nanostructured Rear Electrode
Bjoern Niesen et al.
ADVANCED ENERGY MATERIALS (2013)
Improved Performance and Stability of Inverted Organic Solar Cells with Sol-Gel Processed, Amorphous Mixed Metal Oxide Electron Extraction Layers Comprising Alkaline Earth Metals
Olympia Pachoumi et al.
ADVANCED ENERGY MATERIALS (2013)
Greatly Reduced Processing Temperature for a Solution-Processed NiOx Buffer Layer in Polymer Solar Cells
Zhichun Zhai et al.
ADVANCED ENERGY MATERIALS (2013)
Solution-Processed (Graphene Oxide)-(d0 Transition Metal Oxide) Composite Anodic Buffer Layers toward High-Performance and Durable Inverted Polymer Solar Cells
Yi-Hsiang Chao et al.
ADVANCED ENERGY MATERIALS (2013)
Investigation of a Conjugated Polyelectrolyte Interlayer for Inverted Polymer:Fullerene Solar Cells
Ruidong Xia et al.
ADVANCED ENERGY MATERIALS (2013)
[6,6]-Phenyl-C61-Butyric Acid Dimethylamino Ester as a Cathode Buffer Layer for High-Performance Polymer Solar Cells
Shusheng Li et al.
ADVANCED ENERGY MATERIALS (2013)
Imidazolium-Substituted Polythiophenes as Efficient Electron Transport Materials Improving Photovoltaic Performance
Jurgen Kesters et al.
ADVANCED ENERGY MATERIALS (2013)
High-Efficiency Polymer Solar Cells Achieved by Doping Plasmonic Metallic Nanoparticles into Dual Charge Selecting Interfacial Layers to Enhance Light Trapping
Xi Yang et al.
ADVANCED ENERGY MATERIALS (2013)
The case for organic photovoltaics
Seth B. Darling et al.
RSC ADVANCES (2013)
Plasmonic Forward Scattering Effect in Organic Solar Cells: A Powerful Optical Engineering Method
Se-Woong Baek et al.
SCIENTIFIC REPORTS (2013)
Pyridinium salt-based molecules as cathode interlayers for enhanced performance in polymer solar cells
Hua Ye et al.
JOURNAL OF MATERIALS CHEMISTRY A (2013)
Amine group functionalized fullerene derivatives as cathode buffer layers for high performance polymer solar cells
Zhi-Guo Zhang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2013)
High performance polymer solar cells with a polar fullerene derivative as the cathode buffer layer
Xiaodong Li et al.
JOURNAL OF MATERIALS CHEMISTRY A (2013)
Solution processed reduced graphene oxide/metal oxide hybrid electron transport layers for highly efficient polymer solar cells
K. D. G. Imalka Jayawardena et al.
JOURNAL OF MATERIALS CHEMISTRY A (2013)
Solution processed metal-oxides for organic electronic devices
Kirill Zilberberg et al.
JOURNAL OF MATERIALS CHEMISTRY C (2013)
Surface-Initiated Poly(3-methylthiophene) as a Hole-Transport Layer for Polymer Solar Cells with High Performance
Liqiang Yang et al.
ACS APPLIED MATERIALS & INTERFACES (2012)
Electron Accumulation on Metal Nanoparticles in Plasmon-Enhanced Organic Solar Cells
Michael Salvador et al.
ACS NANO (2012)
Electrostatic Self-Assembly Conjugated Polyelectrolyte-Surfactant Complex as an Interlayer for High Performance Polymer Solar Cells
Yi-Ming Chang et al.
ADVANCED FUNCTIONAL MATERIALS (2012)
High-Performance Inverted Polymer Solar Cells: Device Characterization, Optical Modeling, and Hole-Transporting Modifications
Jingyu Zou et al.
ADVANCED FUNCTIONAL MATERIALS (2012)
Large AuAg Alloy Nanoparticles Synthesized in Organic Media Using a One-Pot Reaction: Their Applications for High-Performance Bulk Heterojunction Solar Cells
Hsieh-Chih Chen et al.
ADVANCED FUNCTIONAL MATERIALS (2012)
Amino N-Oxide Functionalized Conjugated Polymers and their Amino-Functionalized Precursors: New Cathode Interlayers for High-Performance Optoelectronic Devices
Xing Guan et al.
ADVANCED FUNCTIONAL MATERIALS (2012)
Tuning the Energy Level Offset between Donor and Acceptor with Ferroelectric Dipole Layers for Increased Efficiency in Bilayer Organic Photovoltaic Cells
Bin Yang et al.
ADVANCED MATERIALS (2012)
Hole and Electron Extraction Layers Based on Graphene Oxide Derivatives for High-Performance Bulk Heterojunction Solar Cells
Jun Liu et al.
ADVANCED MATERIALS (2012)
Solution Processed MoO3 Interfacial Layer for Organic Photovoltaics Prepared by a Facile Synthesis Method
Seiichiro Murase et al.
ADVANCED MATERIALS (2012)
Interlayer for Modified Cathode in Highly Efficient Inverted ITO-Free Organic Solar Cells
Zheng Tang et al.
ADVANCED MATERIALS (2012)
Dual Plasmonic Nanostructures for High Performance Inverted Organic Solar Cells
Xuanhua Li et al.
ADVANCED MATERIALS (2012)
Optical Design of Transparent Thin Metal Electrodes to Enhance In-Coupling and Trapping of Light in Flexible Polymer Solar Cells
Jose-Francisco Salinas et al.
ADVANCED MATERIALS (2012)
Metal Oxide Nanoparticles as an Electron-Transport Layer in High-Performance and Stable Inverted Polymer Solar Cells
Jingbi You et al.
ADVANCED MATERIALS (2012)
Transition Metal Oxides for Organic Electronics: Energetics, Device Physics and Applications
Jens Meyer et al.
ADVANCED MATERIALS (2012)
Chemically modified graphene oxides as a hole transport layer in organic solar cells
Dong Yang et al.
CHEMICAL COMMUNICATIONS (2012)
Highly Efficient Inverted Polymer Solar Cells Based on an Alcohol Soluble Fullerene Derivative Interfacial Modification Material
Chunhui Duan et al.
CHEMISTRY OF MATERIALS (2012)
Inverted polymer solar cells with 8.4% efficiency by conjugated polyelectrolyte
Tingbin Yang et al.
ENERGY & ENVIRONMENTAL SCIENCE (2012)
Towards fabrication of high-performing organic photovoltaics: new donor-polymer, atomic layer deposited thin buffer layer and plasmonic effects
Dong Chan Lim et al.
ENERGY & ENVIRONMENTAL SCIENCE (2012)
High performance polymeric charge recombination layer for organic tandem solar cells
Yinhua Zhou et al.
ENERGY & ENVIRONMENTAL SCIENCE (2012)
Semi-transparent polymer solar cells with 6% PCE, 25% average visible transmittance and a color rendering index close to 100 for power generating window applications
Kung-Shih Chen et al.
ENERGY & ENVIRONMENTAL SCIENCE (2012)
Recent advances in solution-processed interfacial materials for efficient and stable polymer solar cells
Hin-Lap Yip et al.
ENERGY & ENVIRONMENTAL SCIENCE (2012)
Room-temperature solution processed SnOx as an electron extraction layer for inverted organic solar cells with superior thermal stability
Sara Trost et al.
JOURNAL OF MATERIALS CHEMISTRY (2012)
High-performance polymer solar cells with a conjugated zwitterion by solution processing or thermal deposition as the electron-collection interlayer
Kuan Sun et al.
JOURNAL OF MATERIALS CHEMISTRY (2012)
Effective interfacial layer to enhance efficiency of polymer solar cells via solution-processed fullerene-surfactants
Chang-Zhi Li et al.
JOURNAL OF MATERIALS CHEMISTRY (2012)
Plasmonic-enhanced polymer solar cells incorporating solution-processable Au nanoparticle-adhered graphene oxide
Guo-Qiang Fan et al.
JOURNAL OF MATERIALS CHEMISTRY (2012)
Metal oxides for interface engineering in polymer solar cells
Song Chen et al.
JOURNAL OF MATERIALS CHEMISTRY (2012)
Functional fullerenes for organic photovoltaics
Chang-Zhi Li et al.
JOURNAL OF MATERIALS CHEMISTRY (2012)
Self-Assembled Poly(ethylene glycol) Buffer Layers in Polymer Solar Cells: Toward Superior Stability and Efficiency
Shang-Chieh Chien et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2012)
Solution-Processed Tungsten Oxide as an Effective Anode Buffer Layer for High-Performance Polymer Solar Cells
Zhan'ao Tan et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2012)
High Efficiency and High Voc Inverted Polymer Solar Cells Based on a Low-Lying HOMO Polycarbazole Donor and a Hydrophilic Polycarbazole Inter layer on ITO Cathode
Jiangman Sun et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2012)
Sulfated Graphene Oxide as a Hole-Extraction Layer in High-Performance Polymer Solar Cells
Jun Liu et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2012)
Multiple Functionalities of Polyfluorene Grafted with Metal Ion-Intercalated Crown Ether as an Electron Transport Layer for Bulk-Heterojunction Polymer Solar Cells: Optical Interference, Hole Blocking, Interfacial Dipole, and Electron Conduction
Sih-Hao Liao et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2012)
Boundaries of Anion/Naphthalenediimide Interactions: From Anion-π Interactions to Anion-Induced Charge-Transfer and Electron-Transfer Phenomena
Samit Guha et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2012)
Roll-to-roll fabrication of polymer solar cells
Roar Sondergaard et al.
MATERIALS TODAY (2012)
High-efficiency inverted dithienogermole-thienopyrrolodione-based polymer solar cells
Cephas E. Small et al.
NATURE PHOTONICS (2012)
Solution processed WO3 layer for the replacement of PEDOT:PSS layer in organic photovoltaic cells
Hana Choi et al.
ORGANIC ELECTRONICS (2012)
Recent progress in the design of narrow bandgap conjugated polymers for high-efficiency organic solar cells
Linyi Bian et al.
PROGRESS IN POLYMER SCIENCE (2012)
Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites
Michael M. Lee et al.
SCIENCE (2012)
A Universal Method to Produce Low-Work Function Electrodes for Organic Electronics
Yinhua Zhou et al.
SCIENCE (2012)
High efficiency inverted polymeric bulk-heterojunction solar cells with hydrophilic conjugated polymers as cathode interlayer on ITO
Yongxiang Zhu et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2012)
High-performance polymer solar cells with moderately reduced graphene oxide as an efficient hole transporting layer
Ye-Jin Jeon et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2012)
Enhanced Open-Circuit Voltage in High Performance Polymer/Fullerene Bulk-Heterojunction Solar Cells by Cathode Modification with a C60 Surfactant
Kevin M. O'Malley et al.
ADVANCED ENERGY MATERIALS (2012)
Inverted Polymer Solar Cells with Reduced Interface Recombination
Song Chen et al.
ADVANCED ENERGY MATERIALS (2012)
Work Function Control of Interfacial Buffer Layers for Efficient and Air-Stable Inverted Low-Bandgap Organic Photovoltaics
Brian J. Worfolk et al.
ADVANCED ENERGY MATERIALS (2012)
Polymer Solar Cells with a Low-Temperature-Annealed Sol-Gel-Derived MoOx Film as a Hole Extraction Layer
Tingbin Yang et al.
ADVANCED ENERGY MATERIALS (2012)
Surface Plasmon and Scattering-Enhanced Low-Bandgap Polymer Solar Cell by a Metal Grating Back Electrode
Jingbi You et al.
ADVANCED ENERGY MATERIALS (2012)
A Self-Doping, O2-Stable, n-Type Interfacial Layer for Organic Electronics
Thomas H. Reilly et al.
ADVANCED ENERGY MATERIALS (2012)
Low-Temperature Solution-Processed Molybdenum Oxide Nanoparticle Hole Transport Layers for Organic Photovoltaic Devices
Yun-Ju Lee et al.
ADVANCED ENERGY MATERIALS (2012)
High Fill Factor Polymer Solar Cells Incorporating a Low Temperature Solution Processed WO3 Hole Extraction Layer
Tobias Stubhan et al.
ADVANCED ENERGY MATERIALS (2012)
Graphene oxide and its reduction: modeling and experimental progress
Shun Mao et al.
RSC ADVANCES (2012)
Finely Tailored Performance of Inverted Organic Photovoltaics through Layer-by-Layer Interfacial Engineering
Qun Chen et al.
ACS APPLIED MATERIALS & INTERFACES (2011)
Top Laminated Graphene Electrode in a Semitransparent Polymer Solar Cell by Simultaneous Thermal Annealing/Releasing Method
Yu-Ying Lee et al.
ACS NANO (2011)
Plasmonic Polymer Tandem Solar Cell
Jun Yang et al.
ACS NANO (2011)
Surface Plasmonic Effects of Metallic Nanoparticles on the Performance of Polymer Bulk Heterojunction Solar Cells
Jyh-Lih Wu et al.
ACS NANO (2011)
Inverted Organic Solar Cells with Sol-Gel Processed High Work-Function Vanadium Oxide Hole-Extraction Layers
Kirill Zilberberg et al.
ADVANCED FUNCTIONAL MATERIALS (2011)
Graphene Intermediate Layer in Tandem Organic Photovoltaic Cells
Shi Wun Tong et al.
ADVANCED FUNCTIONAL MATERIALS (2011)
Enhanced Performance and Air Stability of Polymer Solar Cells by Formation of a Self-Assembled Buffer Layer from Fullerene-End-Capped Poly(ethylene glycol)
Jae Woong Jung et al.
ADVANCED MATERIALS (2011)
PS-b-P3HT Copolymers as P3HT/PCBM Interfacial Compatibilizers for High Efficiency Photovoltaics
Zhenzhong Sun et al.
ADVANCED MATERIALS (2011)
Surface Doping of Conjugated Polymers by Graphene Oxide and Its Application for Organic Electronic Devices
Yan Gao et al.
ADVANCED MATERIALS (2011)
Solution-Processable Reduced Graphene Oxide as a Novel Alternative to PEDOT:PSS Hole Transport Layers for Highly Efficient and Stable Polymer Solar Cells
Jin-Mun Yun et al.
ADVANCED MATERIALS (2011)
Enhancement of Donor-Acceptor Polymer Bulk Heterojunction Solar Cell Power Conversion Efficiencies by Addition of Au Nanoparticles
Dong Hwan Wang et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2011)
Influence of blend microstructure on bulk heterojunction organic photovoltaic performance
Christoph J. Brabec et al.
CHEMICAL SOCIETY REVIEWS (2011)
Recent Advances in Conjugated Polyelectrolytes for Emerging Optoelectronic Applications
Aidee Duarte et al.
CHEMISTRY OF MATERIALS (2011)
The role of buffer layers in polymer solar cells
Riccardo Po et al.
ENERGY & ENVIRONMENTAL SCIENCE (2011)
Flexible polymer solar cells prepared using hard stamps for the direct transfer printing of polymer blends with self-organized interfaces
Fang-Chung Chen et al.
JOURNAL OF MATERIALS CHEMISTRY (2011)
Enhanced photovoltaic performance of polymer solar cells by adding fullerene end-capped polyethylene glycol
Qidong Tai et al.
JOURNAL OF MATERIALS CHEMISTRY (2011)
Graphene Oxide Inter layers for Robust, High-Efficiency Organic Photovoltaics
Ian P. Murray et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2011)
On Voltage, Photovoltage, and Photocurrent in Bulk Heterojunction Organic Solar Cells
Juan Bisquert et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2011)
Selective Inter layers and Contacts in Organic Photovoltaic Cells
Erin L. Ratcliff et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2011)
Controlling Ion Motion in Polymer Light-Emitting Diodes Containing Conjugated Polyelectrolyte Electron Injection Layers
Andres Garcia et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2011)
Sticky Interconnect for Solution-Processed Tandem Solar Cells
Vincent C. Tung et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2011)
Conjugated Zwitterionic Polyelectrolyte as the Charge Injection Layer for High-Performance Polymer Light-Emitting Diodes
Junfeng Fang et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2011)
Tailoring organic heterojunction interfaces in bilayer polymer photovoltaic devices
Akira Tada et al.
NATURE MATERIALS (2011)
Band Bending in Conjugated Polymer Layers
Ilja Lange et al.
PHYSICAL REVIEW LETTERS (2011)
Electrode Considerations for the Optical Enhancement of Organic Bulk Heterojunction Solar Cells
Afshin Hadipour et al.
ADVANCED ENERGY MATERIALS (2011)
Enhanced Power Conversion Efficiency in PCDTBT/PC70BM Bulk Heterojunction Photovoltaic Devices with Embedded Silver Nanoparticle Clusters
Dong Hwan Wang et al.
ADVANCED ENERGY MATERIALS (2011)
Water Processable Graphene Oxide: Single Walled Carbon Nanotube Composite as Anode Modifier for Polymer Solar Cells
Jaemyung Kim et al.
ADVANCED ENERGY MATERIALS (2011)
Enhanced Efficiency in Plastic Solar Cells via Energy Matched Solution Processed NiOx Interlayers
K. Xerxes Steirer et al.
ADVANCED ENERGY MATERIALS (2011)
Solution Processed Vanadium Pentoxide as Charge Extraction Layer for Organic Solar Cells
Kirill Zilberberg et al.
ADVANCED ENERGY MATERIALS (2011)
Effect of Chemical Modification of Fullerene-Based Self-Assembled Monolayers on the Performance of Inverted Polymer Solar Cells
Steven K. Hau et al.
ACS APPLIED MATERIALS & INTERFACES (2010)
Solution-Processable Graphene Oxide as an Efficient Hole Transport Layer in Polymer Solar Cells
Shao-Sian Li et al.
ACS NANO (2010)
Enhanced Performance in Polymer Solar Cells by Surface Energy Control
Xavier Bulliard et al.
ADVANCED FUNCTIONAL MATERIALS (2010)
Interface Engineering for Organic Electronics
Hong Ma et al.
ADVANCED FUNCTIONAL MATERIALS (2010)
Enhanced performance of inverted polymer solar cells with cathode interfacial tuning via water-soluble polyfluorenes
Seok-In Na et al.
APPLIED PHYSICS LETTERS (2010)
Charge Photogeneration in Organic Solar Cells
Tracey M. Clarke et al.
CHEMICAL REVIEWS (2010)
Water/alcohol soluble conjugated polymers as highly efficient electron transporting/injection layer in optoelectronic devices
Fei Huang et al.
CHEMICAL SOCIETY REVIEWS (2010)
The chemistry of graphene oxide
Daniel R. Dreyer et al.
CHEMICAL SOCIETY REVIEWS (2010)
Small-Molecule Thiophene-C60 Dyads As Compatibilizers in Inverted Polymer Solar Cells
Jong Bok Kim et al.
CHEMISTRY OF MATERIALS (2010)
Theoretical study of the surface modification of indium tin oxide with trifluorophenyl phosphonic acid molecules: impact of coverage density and binding geometry
Hong Li et al.
JOURNAL OF MATERIALS CHEMISTRY (2010)
Interface investigation and engineering - achieving high performance polymer photovoltaic devices
Li-Min Chen et al.
JOURNAL OF MATERIALS CHEMISTRY (2010)
Interface materials for organic solar cells
Roland Steim et al.
JOURNAL OF MATERIALS CHEMISTRY (2010)
Product integration of compact roll-to-roll processed polymer solar cell modules: methods and manufacture using flexographic printing, slot-die coating and rotary screen printing
Frederik C. Krebs et al.
JOURNAL OF MATERIALS CHEMISTRY (2010)
Enhancement of P3HT/PCBM Photovoltaic Efficiency Using the Surfactant of Triblock Copolymer Containing Poly(3-hexylthiophene) and Poly(4-vinyltriphenylamine) Segments
Jung-Hsun Tsai et al.
MACROMOLECULES (2010)
Upscaling of polymer solar cell fabrication using full roll-to-roll processing
Frederik C. Krebs et al.
NANOSCALE (2010)
Plasmonics for improved photovoltaic devices
Harry A. Atwater et al.
NATURE MATERIALS (2010)
Critical Interfaces in Organic Solar Cells and Their Influence on the Open-Circuit Voltage
William J. Potscavage et al.
ACCOUNTS OF CHEMICAL RESEARCH (2009)
Morphology Control in Solution-Processed Bulk-Heterojunction Solar Cell Mixtures
Adam J. Moule et al.
ADVANCED FUNCTIONAL MATERIALS (2009)
Vertical Phase Separation in Poly(3-hexylthiophene): Fullerene Derivative Blends and its Advantage for Inverted Structure Solar Cells
Zheng Xu et al.
ADVANCED FUNCTIONAL MATERIALS (2009)
Electronic Properties at Gold/Conjugated-Polyelectrolyte Interfaces
Jung Hwa Seo et al.
ADVANCED MATERIALS (2009)
Energy-Level Alignment at Organic/Metal and Organic/Organic Interfaces
Slawomir Braun et al.
ADVANCED MATERIALS (2009)
Energy level alignment of poly(3-hexylthiophene): [6,6]-phenyl C61 butyric acid methyl ester bulk heterojunction
Zheng Xu et al.
APPLIED PHYSICS LETTERS (2009)
Role of the deep-lying electronic states of MoO3 in the enhancement of hole-injection in organic thin films
M. Kroeger et al.
APPLIED PHYSICS LETTERS (2009)
Synthesis of Conjugated Polymers for Organic Solar Cell Applications
Yen-Ju Cheng et al.
CHEMICAL REVIEWS (2009)
Nanoscale functional interlayers formed through spontaneous vertical phase separation in polymer photovoltaic devices
Fang-Chung Chen et al.
JOURNAL OF MATERIALS CHEMISTRY (2009)
An inverted polymer photovoltaic cell with increased air stability obtained by employing novel hole/electron collecting layers
Chen-Yan Li et al.
JOURNAL OF MATERIALS CHEMISTRY (2009)
A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies
Frederik C. Krebs et al.
JOURNAL OF MATERIALS CHEMISTRY (2009)
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Akihiro Kojima et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)
Ultrasmooth Silver Thin Films Deposited with a Germanium Nucleation Layer
Logeeswaran Vj et al.
NANO LETTERS (2009)
The interface energetics of self-assembled monolayers on metals
Georg Heimel et al.
ACCOUNTS OF CHEMICAL RESEARCH (2008)
Efficient Polymer Solar Cells with Surface Relief Gratings Fabricated by Simple Soft Lithography
Seok-In Na et al.
ADVANCED FUNCTIONAL MATERIALS (2008)
Structural characterization of conjugated polyelectrolyte electron transport layers by NEXAFS spectroscopy
Juhyun Park et al.
ADVANCED MATERIALS (2008)
Recent Applications of Conjugated Polyelectrolytes in Optoelectronic Devices
Corey V. Hoven et al.
ADVANCED MATERIALS (2008)
Polymer solar cells that use self-assembled-monolayer-modified ZnO/Metals as cathodes
Hin-Lap Yip et al.
ADVANCED MATERIALS (2008)
A semi-transparent plastic solar cell fabricated by a lamination process
Jinsong Huang et al.
ADVANCED MATERIALS (2008)
Transparent and conductive electrodes based on unpatterned, thin metal films
Brendan O'Connor et al.
APPLIED PHYSICS LETTERS (2008)
High performance ambient processed inverted polymer solar cells through interfacial modification with a fullerene self-assembled monolayer
Steven K. Hau et al.
APPLIED PHYSICS LETTERS (2008)
Anion-pi interactions
Brandi L. Schottel et al.
CHEMICAL SOCIETY REVIEWS (2008)
Sulfonated poly(diphenylamine) as a novel hole-collecting layer in polymer photovoltaic cells
Chen-Yan Li et al.
JOURNAL OF MATERIALS CHEMISTRY (2008)
Electronic properties of conjugated polyelectrolyte thin films
Jung Hwa Seo et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2008)
Processing additives for improved efficiency from bulk heterojunction solar cells
Jae Kwan Lee et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2008)
Electron injection into organic semiconductor devices from high work function cathodes
Corey V. Hoven et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2008)
Stability/degradation of polymer solar cells
Mikkel Jorgensen et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2008)
Folded reflective tandem polymer solar cell doubles efficiency
Kristofer Tvingstedt et al.
APPLIED PHYSICS LETTERS (2007)
Ion motion in conjugated polyelectrolyte electron transporting layers
Corey Hoven et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2007)
The use of ZnO as optical spacer in polymer solar cells: Theoretical and experimental study
Jan Gilot et al.
APPLIED PHYSICS LETTERS (2007)
Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols
J. Peet et al.
NATURE MATERIALS (2007)
Device physics of polymer:fullerene bulk heterojunction solar cells
Paul W. M. Blom et al.
ADVANCED MATERIALS (2007)
Highly efficient organic devices based on electrically doped transport layers
K. Walzer et al.
CHEMICAL REVIEWS (2007)
Charge carrier transporting molecular materials and their applications in devices
Yasuhiko Shirota et al.
CHEMICAL REVIEWS (2007)
Conjugated polymer-based organic solar cells
Serap Guenes et al.
CHEMICAL REVIEWS (2007)
Control of interchain contacts, solid-state fluorescence quantum yield, and charge transport of cationic conjugated polyelectrolytes by choice of anion
Renqiang Yang et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2006)
Highly efficient inverted organic photovoltaics using solution based titanium oxide as electron selective contact
C. Waldauf et al.
APPLIED PHYSICS LETTERS (2006)
Efficient inverted polymer solar cells
G. Li et al.
APPLIED PHYSICS LETTERS (2006)
Interface energetics and level alignment at covalent metal-molecule junctions:: π-conjugated thiols on gold
G Heimel et al.
PHYSICAL REVIEW LETTERS (2006)
New architecture for high-efficiency polymer photovoltaic cells using solution-based titanium oxide as an optical spacer
JY Kim et al.
ADVANCED MATERIALS (2006)
Fermi-level pinning at conjugated polymer interfaces
C Tengstedt et al.
APPLIED PHYSICS LETTERS (2006)
Amphiphilic diblock copolymer compatibilizers and their effect on the morphology and performance of polythiophene:: Fullerene solar cells
K Sivula et al.
ADVANCED MATERIALS (2006)
An interfacial instability in a transient wetting layer leads to lateral phase separation in thin spin-cast polymer-blend films
SY Heriot et al.
NATURE MATERIALS (2005)
Photocurrent generation in polymer-fullerene bulk heterojunctions
VD Mihailetchi et al.
PHYSICAL REVIEW LETTERS (2004)
Efficient electron injection from a bilayer cathode consisting of aluminum and alcohol-/water-soluble conjugated polymers
HB Wu et al.
ADVANCED MATERIALS (2004)
Cathode dependence of the open-circuit voltage of polymer:fullerene bulk heterojunction solar cells
VD Mihailetchi et al.
JOURNAL OF APPLIED PHYSICS (2003)
Photoluminescence quenching at a polythiophene/C60 heterojunction
M Theander et al.
PHYSICAL REVIEW B (2000)