Acetone Sensing of Multi-Networked WO3-NiO Core-Shell Nanorod Sensors

WO3-NiO core-shell nanorods were synthesized by thermal evaporation of a mixture of WO3 and graphite powders and immersion of the synthesized WO3 nanorods in an 20 mM of nickel(II) acetate tetrahydrate (Ni(OCOCH3)(2)center dot 4H(2)O) solution followed by UV irradiation and annealing. Subsequently, multi-networked nanorod sensors were fabricated by connecting these nanostructures with electrodes. The sensing properties of pristine WO3 nanorod and WO3-NiO core-shell nanorod sensors toward acetone were examined. Subsequently, multi-networked nanorod sensors were fabricated by connecting these nanostructures with electrodes. The WO3-NiO core-shell nanorod sensor exhibited a stronger response to acetone gas and shorter response/recovery times than the pristine WO3 nanorod sensor. The pristine WO3 nanorods showed responses of approximately 1.36 to 200 ppm of CH3COCH3 at 300 A degrees C. On the other hand, the WO3-NiO core-shell nanorods showed responses of 4.4 to the same concentration of CH3COCH3 at the same temperature. The core-shell nanorods exhibited response and recovery times of 51 s and 59 s, respectively for 200 ppm of CH3COCH3. On the other hand, the pristine WO3 nanorods exhibited response and recovery times of 51 s and 59 s, respectively, for the same concentration of CH3COCH3. NiO coating enhanced the selectivity of the WO3 nanorods for acetone as well as the sensitivity of the WO3 nanorods. The underlying mechanism of the enhanced response of the WO3-NiO core-shell nanorod sensor is also discussed in detail.