相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Drug encapsulated polymeric microspheres for intracranial tumor therapy: A review of the literature
J. Alaina Floyd et al.
ADVANCED DRUG DELIVERY REVIEWS (2015)
Fabrication of extended-release patient-tailored prednisolone tablets via fused deposition modelling (FDM) 3D printing
Justyna Skowyra et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2015)
3D printing of modified-release aminosalicylate (4-ASA and 5-ASA) tablets
Alvaro Goyanes et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2015)
A flexible-dose dispenser for immediate and extended release 3D printed tablets
Katarzyna Pietrzak et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2015)
Hyperspectral imaging in quality control of inkjet printed personalised dosage forms
Hossein Vakili et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)
Perspective: Concepts of printing technologies for oral film formulations
Maren Preis et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)
Rheology as a tool for evaluation of melt processability of innovative dosage forms
Johanna Aho et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)
Personalised dosing: Printing a dose of one's own medicine
Mustafa Alomari et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)
3D printing of tablets containing multiple drugs with defined release profiles
Shaban A. Khaled et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)
Effect of geometry on drug release from 3D printed tablets
Alvaro Goyanes et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)
Inkjet printing for pharmaceutics - A review of research and manufacturing
Ronan Daly et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)
3D printing of five-in-one dose combination polypill with defined immediate and sustained release profiles
Shaban A. Khaled et al.
JOURNAL OF CONTROLLED RELEASE (2015)
Three-Dimensional Printing of Drug-Eluting Implants: Preparation of an Antimicrobial Polylactide Feedstock Material
Jorrit Jeroen Water et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2015)
In vivo evaluation and characterization of a bio-absorbable drug-coated stent fabricated using a 3D-printing system
Su A. Park et al.
MATERIALS LETTERS (2015)
3D Printing of Medicines: Engineering Novel Oral Devices with Unique Design and Drug Release Characteristics
Alvaro Goyanes et al.
MOLECULAR PHARMACEUTICS (2015)
3D Printed Programmable Release Capsules
Maneesh K. Gupta et al.
NANO LETTERS (2015)
Dry powders for oral inhalation free of lactose carrier particles
Anne Marie Healy et al.
ADVANCED DRUG DELIVERY REVIEWS (2014)
Evaluation of 3D Printing and Its Potential Impact on Biotechnology and the Chemical Sciences
Bethany C. Gross et al.
ANALYTICAL CHEMISTRY (2014)
Modelling of PLA melt rheology and batch mixing energy balance
Pierre Erwan Le Marec et al.
EUROPEAN POLYMER JOURNAL (2014)
Fused-filament 3D printing (3DP) for fabrication of tablets
Alvaro Goyanes et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2014)
Towards fabrication of 3D printed medical devices to prevent biofilm formation
Niklas Sandler et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2014)
Desktop 3D printing of controlled release pharmaceutical bilayer tablets
Shaban A. Khaled et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2014)
3-dimensional (3D) fabricated polymer based drug delivery systems
Simon E. Moulton et al.
JOURNAL OF CONTROLLED RELEASE (2014)
Dropwise Additive Manufacturing of Pharmaceutical Products for Solvent-Based Dosage Forms
Laura Hirshfield et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2014)
Inkjet printing for pharmaceutical applications
Ryan D. Boehm et al.
MATERIALS TODAY (2014)
Continuous 3D-printing for additive manufacturing
Daniel Guenther et al.
RAPID PROTOTYPING JOURNAL (2014)
Elongational flow properties of thermoplastic polyvinyl alcohol/polypropylene from the melt spinning method
Te-Hsing Ku et al.
TEXTILE RESEARCH JOURNAL (2014)
Inkjet printing of Chitlac-nanosilver-a method to create functional coatings for non-metallic bone implants
Sara Nganga et al.
BIOFABRICATION (2014)
Oral delivery of proteins by biodegradable nanoparticles
Sasha H. Bakhru et al.
ADVANCED DRUG DELIVERY REVIEWS (2013)
In vitro characterisation of terbutaline sulphate particles prepared by thermal ink-jet spray freeze drying
Garima Sharma et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2013)
Inkjet Printing of Amphotericin B onto Biodegradable Microneedles Using Piezoelectric Inkjet Printing
Ryan D. Boehm et al.
JOM (2013)
Melt processing and characterization of polyvinyl alcohol and polyhydroxyalkanoate multilayer films
Christopher Thellen et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2013)
Modelling the jetting of dilute polymer solutions in drop-on-demand inkjet printing
C. Mcllroy et al.
JOURNAL OF NON-NEWTONIAN FLUID MECHANICS (2013)
Inkjet printed antibiotic- and calcium-eluting bioresorbable nanocomposite micropatterns for orthopedic implants
Yexin Gu et al.
ACTA BIOMATERIALIA (2012)
Novel methods of antiepileptic drug delivery - Polymer-based implants
Amy J. Halliday et al.
ADVANCED DRUG DELIVERY REVIEWS (2012)
Dispensing of rheologically complex fluids: The map of misery
Christian Clasen et al.
AICHE JOURNAL (2012)
Extrusion based rapid prototyping technique: An advanced platform for tissue engineering scaffold fabrication
M. Enamul Hoque et al.
BIOPOLYMERS (2012)
Thermal ink-jet spray freeze-drying for preparation of excipient-free salbutamol sulphate for inhalation
Wunlapa Mueannoom et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2012)
Extrusion printed polymer structures: A facile and versatile approach to tailored drug delivery platforms
Parawee Rattanakit et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2012)
Drug eluting stents: Developments and current status
Wahid Khan et al.
JOURNAL OF CONTROLLED RELEASE (2012)
Jetting behavior of polymer solutions in drop-on-demand inkjet printing
Stephen D. Hoath et al.
JOURNAL OF RHEOLOGY (2012)
Suitability of PLA/TCP for fused deposition modeling
Dietmar Drummer et al.
RAPID PROTOTYPING JOURNAL (2012)
Additive manufacturing: rapid prototyping comes of age
Ian Campbell et al.
RAPID PROTOTYPING JOURNAL (2012)
Indirect rapid prototyping of antibacterial acid anhydride copolymer microneedles
Ryan D. Boehm et al.
BIOFABRICATION (2012)
Nanosuspensions as advanced printing ink for accurate dosing of poorly soluble drugs in personalized medicines
Jana Pardeike et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2011)
Inkjet printing as a novel medicine formulation technique
Nikolaos Scoutaris et al.
JOURNAL OF CONTROLLED RELEASE (2011)
Inkjet Printing of Drug Substances and Use of Porous Substrates-Towards Individualized Dosing
Niklas Sandler et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2011)
Fabrication of three-dimensional scaffolds using precision extrusion deposition with an assisted cooling device
Q. Hamid et al.
BIOFABRICATION (2011)
Modification of microneedles using inkjet printing
R. D. Boehm et al.
AIP ADVANCES (2011)
Inkjet Printing Methodologies for Drug Screening
Giuseppe Arrabito et al.
ANALYTICAL CHEMISTRY (2010)
Inkjet Printing of Functional and Structural Materials: Fluid Property Requirements, Feature Stability, and Resolution
Brian Derby
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 40 (2010)
Novel oral fast-disintegrating drug delivery devices with predefined inner structure fabricated by Three-Dimensional Printing
Deng-Guang Yu et al.
JOURNAL OF PHARMACY AND PHARMACOLOGY (2010)
Prediction of Solubility and Permeability Class Membership: Provisional BCS Classification of the World's Top Oral Drugs
Arik Dahan et al.
AAPS JOURNAL (2009)
A novel fast disintegrating tablet fabricated by three-dimensional printing
Deng-Guang Yu et al.
DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2009)
Novel drug delivery devices for providing linear release profiles fabricated by 3DP
Deng-Guang Yu et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2009)
'Gobbling drops': the jetting-dripping transition in flows of polymer solutions
C. Clasen et al.
JOURNAL OF FLUID MECHANICS (2009)
The controlled-releasing drug implant based on the three dimensional printing technology: Fabrication and properties of drug releasing in vivo
Wu Weigang et al.
JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION (2009)
Influence of Fluid Physical Properties on Ink-Jet Printability
Daehwan Jang et al.
LANGMUIR (2009)
Direct writing technology-Advances and developments
K. K. B. Hon et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2008)
The fabrication and characterization of inkjet-printed polyaniline nanoparticle films
Aoife Morrin et al.
ELECTROCHIMICA ACTA (2008)
Effect of binder content on the material properties of polymethyl methacrylate fabricated by three dimensional printing technique
R. Patirupanusara et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
Three-dimensional printing in pharmaceutics: Promises and problems
Deng Guang Yu et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2008)
Thermal inkjet application in the preparation of oral dosage forms: Dispensing of prednisolone solutions and polymorphic characterization by solid-state spectroscopic techniques
Peter A. Melendez et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2008)
Effect of processing conditions on the bonding quality of FDM polymer filaments
Q. Sun et al.
RAPID PROTOTYPING JOURNAL (2008)
Melt flow behaviour of poly-ε-caprolactone in fused deposition modelling
H. S. Ramanath et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2008)
The application of ink-jet technology for the coating and loading of drug-eluting stents
Peter J. Tarcha et al.
ANNALS OF BIOMEDICAL ENGINEERING (2007)
Tablets with material gradients fabricated by three-dimensional printing
Deng Guang Yu et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2007)
Levofloxacin implants with predefined microstructure fabricated by three-dimensional printing technique
Weidong Huang et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2007)
Experimental study of wet granulation in fluidized bed: Impact of the binder properties on the granule morphology
P. Rajniak et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2007)
Fab@Home: the personal desktop fabricator kit
Evan Malone et al.
RAPID PROTOTYPING JOURNAL (2007)
Application of fused deposition modelling in controlled drug delivery devices
S. H. Masood
ASSEMBLY AUTOMATION (2007)
Particle engineering techniques for inhaled biopharmaceuticals
Sunday A. Shoyele et al.
ADVANCED DRUG DELIVERY REVIEWS (2006)
Chemical microarray: a new tool for drug screening and discovery
Haiching Ma et al.
DRUG DISCOVERY TODAY (2006)
Development of near zero-order release dosage forms using three-dimensional printing (3-DP (TM)) technology
CC Wang et al.
DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2006)
Biofunctional rapid prototyping for tissue-engineering applications:: 3D bioplotting versus 3D printing
A Pfister et al.
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2004)
A novel compression-coated doughnut-shaped tablet design for zero-order sustained release
E Sundy et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2004)
Insertion of microneedles into skin: measurement and prediction of insertion force and needle fracture force
SP Davis et al.
JOURNAL OF BIOMECHANICS (2004)
Precision extruding deposition and characterization of cellular poly-epsilon-caprolactone tissue scaffolds
F Wang et al.
RAPID PROTOTYPING JOURNAL (2004)
Inkjet printing of highly loaded particulate suspensions
B Derby et al.
MRS BULLETIN (2003)
Spreading and infiltration of inkjet-printed polymer solution droplets on a porous substrate
RK Holman et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2002)
Process control and scale-up of pharmaceutical wet granulation processes: a review
A Faure et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2001)
Nucleation, growth and breakage phenomena in agitated wet granulation processes: a review
SM Iveson et al.
POWDER TECHNOLOGY (2001)
Lack of pain associated with microfabricated microneedles
S Kaushik et al.
ANESTHESIA AND ANALGESIA (2001)
Oral dosage forms fabricated by Three Dimensional Printing™
WE Katstra et al.
JOURNAL OF CONTROLLED RELEASE (2000)
Multimechanism oral dosage forms fabricated by three dimensional printing™
CW Rowe et al.
JOURNAL OF CONTROLLED RELEASE (2000)
分享论文
