相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Modeling of geometrical and machining parameters on temperature rise while machining Al 6351 using response surface methodology and genetic algorithm
M. Santhanakrishnan et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2017)
A pure thermal model to evaluate heat-affected zone when milling E-glass fiber-reinforced polyester composites
Ali Mkaddem et al.
JOURNAL OF COMPOSITE MATERIALS (2017)
Application of particle swarm optimization and response surface methodology for machining parameters optimization of aluminium matrix composites in milling operation
Rashmi Laxmikant Malghan et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2017)
Modeling and experimental study of temperature distributions in end milling Ti6Al4V with solid carbide tool
Yujing Sun et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2017)
Experimental investigation of the cutting temperature and surface quality during milling of unidirectional carbon fiber reinforced plastic
Seyedbehzad Ghafarizadeh et al.
JOURNAL OF COMPOSITE MATERIALS (2016)
Cryogenic and minimum quantity lubrication for an eco-efficiency turning of AISI 304
O. Pereira et al.
JOURNAL OF CLEANER PRODUCTION (2016)
Thermal analysis during bone drilling using rigid polyurethane foams: numerical and experimental methodologies
M. G. A. Fernandes et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2016)
Cutting temperature analysis considering the improved Oxley's predictive machining theory
Mehmet Aydin
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2016)
Research on cutting temperature of work-piece in milling process based on WPSO
Yong Feng et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
A simple mathematical procedure to estimate heat flux in machining using measured surface temperature with infrared laser
Hocine Mzad
CASE STUDIES IN THERMAL ENGINEERING (2015)
Parameter identification for finite element based models in dry machining applications
H. Wernsing et al.
15TH CIRP CONFERENCE ON MODELLING OF MACHINING OPERATIONS (15TH CMMO) (2015)
Thermal modelling of end milling
Ismail Lazoglu et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2014)
An experimental investigation of the influence of cutting parameters on cutting temperature in milling Ti6Al4V by applying semi-artificial thermocouple
Yujing Sun et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Study on cutting temperature during milling of titanium alloy based on FEM and experiment
Yong Yang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
A three-dimensional heat conduction inverse procedure to investigate tool-chip thermal interaction in machining process
Vahid Norouzifard et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Simulation-based solid carbide end mill design and geometry optimization
Anhai Li et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Temperature variation in the workpiece and in the cutting tool when dry milling Inconel 718
G. Le Coz et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
An investigation of workpiece temperature variation of helical milling for carbon fiber reinforced plastics (CFRP)
Jie Liu et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2014)
Modeling and analysis of coated tool temperature variation in dry milling of Inconel 718 turbine blade considering flank wear effect
Sijie Yan et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)
Simulation machining of titanium alloy (Ti-6Al-4V) based on the finite element modeling
Moaz H. Ali et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2014)
Enhanced method for the evaluation of the thermal impact of dry machining processes
Heinrich Wernsing et al.
PRODUCTION ENGINEERING-RESEARCH AND DEVELOPMENT (2014)
Cutting temperatures when ball nose end milling γ-TiAl intermetallic alloys
David K. Aspinwall et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2013)
Optimization of machining parameters on temperature rise in end milling of Al 6063 using response surface methodology and genetic algorithm
P. S. Sivasakthivel et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
An investigation of workpiece temperature variation in end milling considering flank rubbing effect
Sen Lin et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2013)
Temperature measurement of cutting tool and machined surface layer in milling of CFRP
Takeshi Yashiro et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2013)
Analytical modeling and experimental investigation of tool and workpiece temperatures for interrupted cutting 1045 steel by inverse heat conduction method
Fulin Jiang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)
Cutting forces, friction coefficient and surface roughness in machining Ti-5Al-4V-0.6Mo-0.4Fe using carbide tool K313 under low pressure liquid nitrogen
Tze Chuen Yap et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2013)
Measuring temperature of rotating cutting tools: Application to MQL drilling and dry milling of aerospace alloys
G. Le Coz et al.
APPLIED THERMAL ENGINEERING (2012)
Heat partitioning in dry milling of steel
Jens Soelter et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2012)
Environmentally conscious machining of difficult-to-machine materials with regard to cutting fluids
A. Shokrani et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2012)
A new approach to the prediction of temperature of the workpiece of face milling operations of Ti-6Al-4V
G. M. Pittala et al.
APPLIED THERMAL ENGINEERING (2011)
Modelling of the heat input for face-milling processes
R. Pabst et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2010)
FEM-based prediction of workpiece transient temperature distribution and deformations during milling
Jitender K. Rai et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2009)
Three-dimensional temperature predictions in machining processes using finite difference method
D. Ulutan et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
A force-temperature model including a constitutive law for Dry High Speed Milling of aluminium alloys
Imed Zaghbani et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Analysis and estimation of cutting-temperature distribution during end milling in relation to orthopedic surgery
Naohiko Sugita et al.
MEDICAL ENGINEERING & PHYSICS (2009)
Experiment, modeling, and analysis for temperature field of milling insert
Guangjun Liu et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2009)
Development of infrared radiation pyrometer with optical fibers - Two-color pyrometer with non-contact fiber coupler
T. Ueda et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2008)
Finite element method based machining simulation environment for analyzing part errors induced during milling of thin-walled components
Jitender K. Rai et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2008)
Effect of coatings and tool geometry on the dry milling of wrought aluminium alloys
L. N. Lopez de Lacalle et al.
INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY (2008)
Experimental and theoretical study of workpiece temperature when end milling hardened steels using (TiAl)N-coated and PcBN-tipped tools
Lincoln Cardoso Brandaeo et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
Analysis of thermal fields in orthogonal machining with infrared imaging
C. Dinc et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
An experimental technique for the measurement of temperature on CBN tool face in end milling
Masahiko Sato et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2007)
On the measurement of temperature in material removal processes
M. A. Davies et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2007)
Prediction of cutting force and temperature rise in the end-milling operation
P. Palanisamy et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2006)
Modelling of cutting induced workpiece temperatures for dry milling
D. J. Richardson et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2006)
Heat generation and temperature prediction in metal cutting: A review and implications for high speed machining
N. A. Abukhshim et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2006)
Comparison of chip surface temperature between up and down milling orientations in high speed rough milling of hardened steel
CK Toh
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)
Cutting temperature measurement while machining - a review
JM Longbottom et al.
AIRCRAFT ENGINEERING AND AEROSPACE TECHNOLOGY (2005)
Three-dimensional finite element modelling of high-speed milling of Inconel 718
SL Soo et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2004)
Experimental research on the dynamic characteristics of the cutting temperature in the process of high-speed milling
M Chen et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
Prediction of tool and chip temperature in continuous and interrupted machining
I Lazoglu et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2002)
Workpiece temperature measurement in machining
D O'Sullivan et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2002)
Temperature fields in machining processes and heat transfer models
G Palazzo et al.
MATHEMATICAL AND COMPUTER MODELLING (2002)
A review of the experimental techniques for the measurement of heat and temperatures generated in some manufacturing processes and tribology
R Komanduri et al.
TRIBOLOGY INTERNATIONAL (2001)
Temperature on flank face of cutting tool in high speed milling
T Ueda et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2001)
Dry machining: Machining of the future
PS Sreejith et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2000)
Process simulation using finite element method -: prediction of cutting forces, tool stresses and temperatures in high-speed flat end milling
T Özel et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2000)
分享论文
