Numerical simulation of limited-entry multi-cluster fracturing in horizontal well

Limited-entry technique has become one of the primary engineering approaches to promote even growth of multiple fractures in hydraulic fracturing. In this paper, we developed a three dimensional (3D) hydro mechanical coupling finite element model to investigate the simultaneous growth of multiple fractures during the multi-stage/multi-cluster fracturing of horizontal wells. The focus is to elaborate the effect of entry friction on the growth of fractures initiated from multiple perforation clusters. To this end, we developed a new element to account for the local pressure drop due to perforation entry friction and thus to dynamically partition the flow of the fracturing fluid among multiple fractures. The effectiveness of this element was validated by two element-level test examples. Propagation of the hydraulic fractures was modeled by using a zero-thickness cohesive element, which can simulate the fracture propagation and fluid flow within the fractures in a completely coupled manner. With this 3D model, parametric studies were performed to illustrate the impact of perforation parameters and stress shadowing on the simultaneous propagation of fractures from multiple perforation clusters within a stage. Results indicate that a sufficiently large perforation pressure drop can counteract the stress shadowing among the multiple fractures and can help to equalize the length of multiple fractures. The differences of down-hole pressures among cases with different perforation parameters are too small to be detected in the field, which indicates that it is hard to tell from the pressure record alone whether or not all the fractures are equally growing. It is also found that the smaller variance of fracture lengths, the bigger total area of the fractures.