期刊
3RD INTERNATIONAL CONFERENCE ON STRUCTURAL INTEGRITY (ICSI 2019)
卷 17, 期 -, 页码 456-463出版社
ELSEVIER SCIENCE BV
DOI: 10.1016/j.prostr.2019.08.060
关键词
Friction stir welding; Finite element analysis; Tool pin profiles; Strength; Progressive failure
资金
- Science and Engineering Research Board (SERB) - DST, New Delhi, India [YSS/2015/000085]
In the present study, an in-situ analysis of crack initiation and propagation during tensile loading was captured using high speed camera for dissimilar friction stir weld joint of AA6061-T6 and AA7075-T651 prepared with plain cylindrical (CYL) and threaded with three intermittent flat faces (TIF) tool pins. To study notch sensitivity, experiment was also carried out for notch tensile sample creating notch at weld center. Joint failures were further predicted by finite element (FE) method. Results indicate that for joints obtained with CYL tool pin, crack initiated from vicinity of tunnel region however, propagated through the boundary of stir zone (SZ) and thermo-mechanically affected zone. FE results also indicate that the stresses and strain were confined near tunnel region which act as crack initiation site. For joints obtained with TIF tool pin, no tunnel/void was noticed in the SZ and the sample failed from the heat affected zone on the advancing side (AA6061-T6) of the joints. For notch tensile specimen, the specimen exhibited minimum elongation when compared with tensile specimen and notch strength ratio > 1 indicated that the joint was notch insensitive or in other words, notch strengthened. FE result indicated that the higher stresses were confined near the notch root from where crack initiated and propagated through the SZ. Fractographic analysis showed the presence of dimples, micro-voids with some shear failure marks for all joints indicating the ductile fracture. (C) 2019 The Authors. Published by Elsevier B.V.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据