An investigation of the combustion process of a heavy-duty dual fuel engine supplemented with natural gas or hydrogen

This paper compares the effects of the addition of hydrogen (H-2) or natural gas (NG) on the combustion of a heavy-duty diesel engine converted to operate under gaseous fuel-diesel dual fuel combustion mode. The parameters examined include the start of combustion (SOC), heat release process, peak heat release rate (PHRR), and combustion duration. Significant positive effects on the combustion process were only observed with the addition of a relatively large amount of H-2 or NG. When operated at low load, the addition of a large amount of H-2 or NG reduced the heat release rate (HRR) of the premixed combustion. By comparison, the addition of a relatively large amount of H-2 or NG at high load significantly increased the PHRR of the diffusion combustion. The addition of H-2 has more significant impact on the PHRR than NG. The addition of NG retarded the SOC while the impact of the addition of H-2 on SOC was relatively mild. The significant variation in HRR and its phasing make it necessary to further optimize the combustion of a dual fuel engine. The impact of the addition of gaseous fuel on the brake thermal efficiency was also examined and discussed. The increased thermal efficiency was only observed with the addition of relatively large amount of H-2 or NG at medium to high load. The improved thermal efficiency was due to the decrease in combustion duration and the shifting of the combustion phasing toward the optimal one. The decreased thermal efficiency observed at low load was due to the low combustion efficiency of the gaseous fuel supplemented. (C) 2016 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.