Effects of specific surface area and pore volume of activated carbon nanofibers on nanoconfinement and dehydrogenation of LiBH4

The effects of specific surface area (S-BET) and total pore volume (V-tot) of activated carbon nanofibers (ACNF) on nanoconfinement and dehydrogenation of LiBH4 are investigated. By varying activation time from 15 to 75 min, S-BET and V-tot of ACNF are altered in the ranges of 509-2752 m(2)/g and 0.38-2.17 mL/g, respectively. Melt infiltration of LiBH4 in ACNF is improved with the increment of S-BET and V-tot. Due to effective melt infiltration, not only high hydrogen content desorbed (up to 81% of theoretical capacity), but also the release of B2H6 is suppressed. All nanoconfined LiBH4 in ACNF show the main dehydrogenation at comparable temperature of 347-352 degrees C, implying that kinetic improvement is mainly from catalytic effects of carbon surface. However, effective nanoconfinement yields considerable reduction of onset and main dehydrogenation temperatures to 275 and 305 degrees C, respectively (Delta T = 125 and 170 degrees C, respectively, as compared with bulk LiBH4). Via remelting the as-prepared sample, further melt infiltration of LiBH4 into voids and/or small pores of ACNF can be obtained. The latter leads to closer contact and more interaction with carbon surface, resulting in the reduction of onset dehydrogenation temperature toward 268 degrees C and the enhancement of relative content of hydrogen released at low temperature (305 degrees C). Thus, multiple times or long length of time for melt infiltration can be an interesting choice to increase LiBH4 content up to the maximum loading of ACNF. (C) 2017 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.