Polyarylate membrane with special circular microporous structure by interfacial polymerization for gas separation

Microporous polymer membranes have received extensive attention in the membrane separation field based on the advantage of high gas permeance and low cost. However, there are a few reports of microporous polyacrylate membranes fabricated by interfacial polymerization (IP), and the formation mechanism and influence factor of the microporous structure is rarely illuminated. In this work, thin-film polyacrylate membrane with circular microporous morphology were prepared by IP method with cyclodextrin and acyl chloride as the aqueous and oil phase monomer respectively for effective gas separation. The effects of the aqueous and organic phase monomer structure and concentration, the concentration and type of alkali in the aqueous solution on the membrane morphology and gas separation performance were investigated in detail. As a result, the polyacrylate membrane fabricated by beta-cyclodextrin (beta-CD) and trimesoyl chloride (TMC) with optimal content of NaOH in the aqueous phase formed the special circular microporous structure by the scanning electronic microscope (SEM) characterization. The resulting membrane showed CO2 permeance of 200 GPU with CO2/N-2 ideal separation selectivity of 10.53. This work provides an effective strategy to fabricate high performance polyacrylate membrane by regulating the monomer structure and the alkali concentration in the aqueous phenol solution with IP method, which would inspire the exploration of other phenolic monomer for the assembly of microporous polymer membranes for gas separation or seawater desalination.