Removal of polycyclic aromatic hydrocarbons from aqueous media using modified clinoptilolite

Carcinogenic polycyclic aromatic hydrocarbons (PAHs) are widespread in the environment. In this study, the removal of PAHs from aqueous media was assessed using samples of clinoptilolite, a natural zeolite, pre-treated with 1 mol/L of NaCl, (Na pre-treated clinoptilolite, NC). Samples (10 g) of NC were separately modified with 5, 2, 2, and 20-mmol/L solutions of cetylpyridinium chloride (CPC), didodecyldimethyl ammonium bromide (DDAB), hexadecyltrimethylammonium bromide (HDTMA), and tetramethyl ammonium chloride (TMA) surfactants as potential cost-effective adsorbents. The kinetics, optimal sorbent dosage, and competitive effects were evaluated through batch adsorption tests using deionised water spiked with five PAHs (anthracene (50 mu g/L), fluoranthene (100 mu g/L), fluorene (100 mu g/L), phenanthrene (100 mu g/L), and pyrene (100 mu g/L)). The surfactant non-modified (NC) and TMA-MC (modified clinoptilolite) exhibited PAH removal of <66% from the spiked concentration in aqueous solution, while CPC-MC, DDAB-MC, and HDTMA-MC achieved removal rates of >93% for the five PAHs after 24 h at a solid:liquid ratio of 1:100. The remaining concentrations of anthracene and fluoranthene were below 3 mu g/L, and that of fluorene was <6 mu g/L, lower than the water quality criteria of British Columbia, Canada, for protecting aquatic life. However, HDTMA-MC retained >83% of the fluorene. Over 80% of all PAHs were absorbed within 15 min for the CPC-MC and DDAB-MC, and the maximum adsorption was reached in <2 h. Three kinetic models were applied assuming pseudo-first-order, pseudo-second-order, and intra-particle equations, and the results were well-represented by the pseudo-second-order equation. The PAH sorption results indicated that the adsorption mechanism is based on PAH hydrophobicity, and pi-pi electron-donor-acceptor interaction with surfactant. CPC and DDAB with two long chain hydrocarbons had more PAH adsorption than HDTMA with one, and TMA with no long chain hydrocarbons (DDAB-MC > CPC-MC > HDTMA-MC >> TMA-MC > NC). With a solid:liquid ratio of 1:200, over 90%, 80%, and 70% of the anthracene, fluoranthene, and pyrene were adsorbed by the CPC-MC, DDAB-MC, and HDTMA-MC, respectively.