期刊
THERMAL SCIENCE AND ENGINEERING PROGRESS
卷 17, 期 -, 页码 -出版社
ELSEVIER
DOI: 10.1016/j.tsep.2019.100358
关键词
Conical axial hydrocyclone; Compact hydrocyclone; Hydrocyclone; Oil water emulsion; Oil water separation; Separation efficiency
资金
- Universiti Teknologi PETRONAS, Malaysia [YUTP - 0153AA-E61]
Petroleum has long been the main fuel for power generation and transportation. However, mature oil wells are experiencing high water cut production with the crude oil resulting in high production and processing costs, as well as environmental impacts. Co-current hydrocyclonic technique has been adopted to solve oil/water separation in the downhole, but this process has some limitations. This paper introduces a compact axial inlet conical hydrocyclone to resolve the high water cut problem in mature fields. Experimental investigation results are presented to evaluate the separation of the newly introduced hydrocyclone. An experimental test loop was designed and fabricated. The flow loop was calibrated to manipulate and control various operational variables, namely, the oil/water mixture flow rate (1.5-4.0 m(3)/h), mixture temperature (50 and 80 degrees C), and water-to-oil ratio (70/30, 80/20, and 90/10). A gear pump is used to circulate the mixture. The droplets were measured and found to be within 35-38 mu m with a mean droplets size of 37 mu m. The results showed that mixture inlet flow rate, water cut, and temperature were influencing the separation efficiency and the pressure drop. The pressure drop of the water part was larger than the pressure drop of the oil part. Optimal separation efficiency was observed when the inlet flow rate is 4 m(3)/h with 80:20 water cut at 80 degrees C. A general trend of increase in separation efficiency with increased temperature was also observed.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据