相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Experimental characterization of heat transfer in an additively manufactured polymer heat exchanger
Martinus A. Arie et al.
APPLIED THERMAL ENGINEERING (2017)
Optimizing the design of a two-phase cooling system loop heat pipe: Wick manufacturing with the 3D selective laser melting printing technique and prototype testing
J. Esarte et al.
APPLIED THERMAL ENGINEERING (2017)
Thermal performance of a polymer composite webbed-tube heat exchanger
Juan Cevallos et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2016)
Scalable 3D Bicontinuous Fluid Networks: Polymer Heat Exchangers Toward Artificial Organs
Christopher S. Roper et al.
ADVANCED MATERIALS (2015)
The status, challenges, and future of additive manufacturing in engineering
Wei Gao et al.
COMPUTER-AIDED DESIGN (2015)
Mechanical properties of 3D re-entrant honeycomb auxetic structures realized via additive manufacturing
Li Yang et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2015)
Enhancement of electrical and thermal conductivity of Su-8 photocrosslinked coatings containing graphene
M. Sangermano et al.
PROGRESS IN ORGANIC COATINGS (2015)
Continuous liquid interface production of 3D objects
John R. Tumbleston et al.
SCIENCE (2015)
Thermo-mechanical Characterization of Metal/Polymer Composite Filaments and Printing Parameter Study for Fused Deposition Modeling in the 3D Printing Process
Seyeon Hwang et al.
JOURNAL OF ELECTRONIC MATERIALS (2015)
Additive manufacturing of heat exchangers: A case study on a multi-layered Ti-6Al-4V oscillating heat pipe
Scott M. Thompson et al.
ADDITIVE MANUFACTURING (2015)
3D-Printing of Lightweight Cellular Composites
Brett G. Compton et al.
ADVANCED MATERIALS (2014)
Highly oriented carbon fiber-polymer composites via additive manufacturing
Halil L. Tekinalp et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2014)
Morphology of polymeric powders in Laser Sintering (LS): From Polyamide to new PEEK powders
S. Berretta et al.
EUROPEAN POLYMER JOURNAL (2014)
Consolidation by Spark Plasma Sintering of Polyimide and Polyetheretherketone
Maxime Schwertz et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2014)
Physico-chemical behaviour of Poly (Ether Ketone) (PEK) in High Temperature Laser Sintering (HT-LS)
O. R. Ghita et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)
Studies on the reprocessability of poly(ether ether ketone) (PEEK)
A. R. McLauchlin et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)
Nonisotropic experimental characterization of the relaxation modulus for PolyJet manufactured parts
David Blanco et al.
JOURNAL OF MATERIALS RESEARCH (2014)
Materials perspective of polymers for additive manufacturing with selective laser sintering
Manfred Schmid et al.
JOURNAL OF MATERIALS RESEARCH (2014)
The importance of carbon fiber to polymer additive manufacturing
Lonnie J. Love et al.
JOURNAL OF MATERIALS RESEARCH (2014)
High Temperature Laser Sintering (HT-LS): An investigation into mechanical properties and shrinkage characteristics of Poly (Ether Ketone) (PEK) structures
O. Ghita et al.
MATERIALS & DESIGN (2014)
On reducing anisotropy in 3D printed polymers via ionizing radiation
Steven Shaffer et al.
POLYMER (2014)
Influence of carbon nanotubes on the rheology and dynamic mechanical properties of polyamide-12 for laser sintering
Jiaming Bai et al.
POLYMER TESTING (2014)
PolyJet technology for product prototyping: Tensile strength and surface roughness properties
Aitor Cazon et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2014)
A review of melt extrusion additive manufacturing processes: I. Process design and modeling
Brian N. Turner et al.
RAPID PROTOTYPING JOURNAL (2014)
A novel method for manufacturing sintered aluminium heat pipes (SAHP)
M. Ameli et al.
APPLIED THERMAL ENGINEERING (2013)
Effect of processing method on the properties of multifunctional exfoliated graphite nanoplatelets/polyamide 12 composites
Mehdi Karevan et al.
CARBON (2013)
A review on 3D micro-additive manufacturing technologies
Mohammad Vaezi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Polymer Heat Exchangers-History, Opportunities, and Challenges
Juan Gabriel Cevallos et al.
HEAT TRANSFER ENGINEERING (2012)
Multifunctional heat exchangers derived from three-dimensional micro-lattice structures
Kevin J. Maloney et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2012)
Quantification of surface roughness of parts processed by laminated object manufacturing
Daekeon Ahn et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2012)
Thermal properties of graphene: Fundamentals and applications
Eric Pop et al.
MRS BULLETIN (2012)
Expanded microchannel heat exchanger: design, fabrication, and preliminary experimental test
D. C. Denkenberger et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY (2012)
Laser sintering of polyamides and other polymers
R. D. Goodridge et al.
PROGRESS IN MATERIALS SCIENCE (2012)
Heat transfer in metal foams and designed porous media
C. Hutter et al.
CHEMICAL ENGINEERING SCIENCE (2011)
Thermal and mechanical properties of a nanocomposite of a photocurable epoxy-acrylate resin and multiwalled carbon nanotubes
Marcos N. dos Santos et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Thermal conductivity of carbon nanotubes and their polymer nanocomposites: A review
Zhidong Han et al.
PROGRESS IN POLYMER SCIENCE (2011)
On the Conduction and Convection Heat Transfer From Lightweight Advanced Heat Sinks
M. Baris Dogruoz et al.
IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES (2010)
Energy Efficient Polymers for Gas-Liquid Heat Exchangers
Patrick Luckow et al.
JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME (2010)
Processing and characterization of a carbon black-filled electrically conductive Nylon-12 nanocomposite produced by selective laser sintering
Siddharth Ram Athreya et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Experimental investigation of plastic finned-tube heat exchangers, with emphasis on material thermal conductivity
Lin Chen et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2009)
Convective heat transfer and pressure losses across novel heat sinks fabricated by Selective Laser Melting
M. Wong et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2009)
A review on polymer heat exchangers for HVAC&R applications
C. T'Joen et al.
INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID (2009)
A benchmark study on rapid prototyping processes and machines: quantitative comparisons of mechanical properties, accuracy, roughness, speed, and material cost
G. D. Kim et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2008)
Compression behavior of micro-scale truss structures formed from self-propagating polymer waveguides
Alan J. Jacobsen et al.
ACTA MATERIALIA (2007)
Consolidation phenomena in laser and powder-bed based layered manufacturing
J. -P. Kruth et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2007)
Rapid prototyping methods of silicon carbide micro heat exchangers
HC Liu et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2005)
Materials analysis of stereolithography resins for use in Rapid Manufacturing
R Hague et al.
JOURNAL OF MATERIALS SCIENCE (2004)
Review of polymer compact heat exchangers, with special emphasis on a polymer film unit
L Zaheed et al.
APPLIED THERMAL ENGINEERING (2004)
Nanofiber-reinforced polymers prepared by fused deposition modeling
ML Shofner et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2003)
A study on green tapes for LOM with water-based tape casting processing
XM Cui et al.
MATERIALS LETTERS (2003)
Influence of processing conditions of polymer film on dropwise condensation heat transfer
XH Ma et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2002)