相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Green machining: A framework for optimization of cutting parameters to minimize energy consumption and exhaust emissions during electrical discharge machining of Al 6061 and SKD 11
Wuyi Ming et al.
JOURNAL OF CLEANER PRODUCTION (2021)
An environmental-friendly electrical discharge machining using different sustainable techniques: a review
Nishant K. Singh et al.
ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES (2021)
Analysis and reduction of process energy consumption and thermal deformation in a micro-structure wire electrode electric discharge machining thin-wall component
Guojun Zhang et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Recent Advances and Perceptive Insights into Powder-Mixed Dielectric Fluid of EDM
Asarudheen Abdudeen et al.
MICROMACHINES (2020)
A comprehensive review of electric discharge machining of advanced ceramics
Wuyi Ming et al.
CERAMICS INTERNATIONAL (2020)
An optimal approach for improving the machinability of Nimonic C-263 superalloy during cryogenic assisted turning
Prashant S. Jadhav et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Parametric optimization of wirecut-electrical discharge machining through cuckoo search algorithm
M. Saravanan et al.
MATERIALS TODAY-PROCEEDINGS (2020)
Machinability investigation on Nimonic C263 alloy in electric discharge machine
Renu K. Shastri et al.
MATERIALS TODAY-PROCEEDINGS (2020)
Multi-objective optimization of abrasive waterjet machining process using Jaya algorithm and PROMETHEE Method
R. Venkata Rao et al.
JOURNAL OF INTELLIGENT MANUFACTURING (2019)
Effect of Electrode Materials on Different EDM Aspects of Titanium Alloy
Munmun Bhaumik et al.
SILICON (2019)
Comparative study of energy efficiency and environmental impact in magnetic field assisted and conventional electrical discharge machining
Wuyi Ming et al.
JOURNAL OF CLEANER PRODUCTION (2019)
Sustainable electrical discharge machining using water in oil nanoemulsion
Hang Dong et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Effect of Distilled Water and Kerosene as Dielectrics on Machining Rate and Surface Morphology of Al-6061 During Electricdischarge Machining
Rubab Arshad et al.
ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL (2019)
Cryogenic Treatment of Nimonic Alloy- Hard Turning: State-of- the-art, Challenges and Future Directions
Prashant. S. Jadhava et al.
MATERIALS TODAY-PROCEEDINGS (2019)
Analysis on surface characteristics of electro-discharge machined Inconel 718
N.A. Rahul et al.
INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY (2018)
Analysis and optimization of process energy consumption and environmental impact in electrical discharge machining of titanium superalloys
Zhen Zhang et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Effects of Tool Electrode on EDM Performance of Ti-6Al-4V
Rahul et al.
SILICON (2018)
Investigating the energy distribution of workpiece and optimizing process parameters during the EDM of Al6061, Inconel718, and SKD11
Wuyi Ming et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Improvement of surface integrity of Nimonic C 263 super alloy produced by WEDM through various post-processing techniques
Amitava Mandal et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Multi-objective optimization of cutting parameters to minimize power consumption in dry turning of stainless steel 316
Salem Abdullah Bagaber et al.
JOURNAL OF CLEANER PRODUCTION (2017)
Effect of cryogenically treated copper-tungsten electrode on tool wear rate during electro-discharge machining of Ti-5Al-2.5Sn alloy
Sanjeev Kumar et al.
WEAR (2017)
Electrical discharge machining of Inconel 825 using cryogenically treated copper electrode: Emphasis on surface integrity and metallurgical characteristics
Rahul et al.
JOURNAL OF MANUFACTURING PROCESSES (2017)
Multi-criteria decision analysis for sub-watersheds ranking via the PROMETHEE method
Tijana Vulevic et al.
INTERNATIONAL SOIL AND WATER CONSERVATION RESEARCH (2017)
Optimizing The Process Parameters Of Electrical Discharge Machining On AA7075-SiC Alloys
P. Prasanna et al.
MATERIALS TODAY-PROCEEDINGS (2017)
Bio-inspired computation: Recent development on the modifications of the cuckoo search algorithm
Haruna Chiroma et al.
APPLIED SOFT COMPUTING (2017)
Investigation of material removal rate and surface roughness during wire electrical discharge machining (WEDM) of Inconel 625 super alloy by cryogenic treated tool electrode
Ashish Goyal
JOURNAL OF KING SAUD UNIVERSITY SCIENCE (2017)
Intelligent Multiple Search Strategy Cuckoo Algorithm for Numerical and Engineering Optimization Problems
Hojjat Rakhshani et al.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2017)
A novel implementation of computational aerodynamic shape optimisation using Modified Cuckoo Search
D. S. Naumann et al.
APPLIED MATHEMATICAL MODELLING (2016)
Interfacial microstructure and optimization of friction welding by Taguchi and ANOVA method on SA 213 tube to SA 387 tube plate without backing block using an external tool
S. Pandiarajan et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Analysis of energy consumption in micro-drilling processes
Alessandro Franco et al.
JOURNAL OF CLEANER PRODUCTION (2016)
A particle swarm approach for multi-objective optimization of electrical discharge machining process
Chinmaya P. Mohanty et al.
JOURNAL OF INTELLIGENT MANUFACTURING (2016)
An effective teaching-learning-based cuckoo search algorithm for parameter optimization problems in structure designing and machining processes
Jida Huang et al.
APPLIED SOFT COMPUTING (2015)
Intelligent cuckoo search optimized traffic signal controllers for multi-intersection network
Sahar Araghi et al.
EXPERT SYSTEMS WITH APPLICATIONS (2015)
Modelling of surface finish, electrode wear and material removal rate in electrical discharge machining of hard-to-machine alloys
A. Torres et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2015)
Characterising Energy Efficiency of Electrical Discharge Machining (EDM) Processes
Wen Li et al.
22ND CIRP CONFERENCE ON LIFE CYCLE ENGINEERING (2015)
CUCKOO SEARCH ALGORITHM FOR OPTIMIZATION PROBLEMS-A LITERATURE REVIEW AND ITS APPLICATIONS
Azizah Binti Mohamad et al.
APPLIED ARTIFICIAL INTELLIGENCE (2014)
Experimental Investigation and Analysis of EDM Characteristics of Inconel 825
Aveek Mohanty et al.
MATERIALS AND MANUFACTURING PROCESSES (2014)
Theoretical predictions and experimental validations on machining the Nimonic C-263 super alloy
C. Ezilarasan et al.
SIMULATION MODELLING PRACTICE AND THEORY (2014)
An experimental analysis and measurement of process performances in machining of nimonic C-263 super alloy
C. Ezilarasan et al.
MEASUREMENT (2013)
Study of ultrasonic assisted cryogenically cooled EDM process using sintered (Cu-TiC) tooltip
Vineet Srivastava et al.
JOURNAL OF MANUFACTURING PROCESSES (2013)
Investigation of material removal characteristics in EDM of nonconductive ZrO2 ceramic
Abdus Sabur et al.
5TH BSME INTERNATIONAL CONFERENCE ON THERMAL ENGINEERING (2013)
Experimental study of distribution of energy during EDM process for utilization in thermal models
Harminder Singh
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2012)
On Electro Discharge Machining of Inconel 718 with Hollow Tool
S. Rajesha et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2012)
Multi-attribute decision making for green electrical discharge machining
S. P. Sivapirakasam et al.
EXPERT SYSTEMS WITH APPLICATIONS (2011)
Surface crack susceptibility of electrodischarge-machined steel surfaces
Tzu-Yao Tai et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2011)
Surface modification of die steel materials by EDM method using tungsten powder-mixed dielectric
Sanjeev Kumar et al.
Journal of Manufacturing Processes (2011)
Decision making in the manufacturing environment using an improved PROMETHEE method
R. Venkata Rao et al.
INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH (2010)
Optimization of EDM process for multiple performance characteristics using Taguchi method and Grey relational analysis
Jong Hyuk Jung et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2010)
Investigation of electro-discharge micro-machining of titanium super alloy
B. B. Pradhan et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2009)
An experimental investigation of tool wear in electric discharge machining
A Ozgedik et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2006)
Effect of laser welding parameters on the heat input and weld-bead profile
KY Benyounis et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)
Electric discharge machining of Al-SiC metal matrix composites using rotary tube electrode
B Mohan et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
Study of the surface integrity of the machined workpiece in the EDM of tungsten carbide
SH Lee et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)