相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Rheological survey of carbon fiber-reinforced high-temperature thermoplastics for big area additive manufacturing tooling applications
Christine Ajinjeru et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2021)
Computational analysis of the extrusion process of fused deposition modeling of acrylonitrile-butadiene-styrene
Nafiseh Shadvar et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2021)
In-process rheological monitoring of extrusion-based polymer processes
Loic Hilliou et al.
POLYMER INTERNATIONAL (2021)
Fused filament fabrication of polymer materials: A review of interlayer bond
Xia Gao et al.
ADDITIVE MANUFACTURING (2021)
Implementation of shear thinning behavior in the fused filament fabrication melting model: Analytical solution and experimental validation
Jose Luis Colon Quintana et al.
ADDITIVE MANUFACTURING (2021)
Advances in modeling transport phenomena in material-extrusion additive manufacturing: Coupling momentum, heat, and mass transfer
Arit Das et al.
PROGRESS IN ADDITIVE MANUFACTURING (2021)
Percolation implications in the rheology of polymer crystallization
Anthony P. Kotula et al.
POLYMER CRYSTALLIZATION (2021)
A numerical study of extensional flow-induced crystallization in filament stretching rheometry
Frank P. A. van Berlo et al.
POLYMER CRYSTALLIZATION (2021)
Material extrusion-based additive manufacturing of polypropylene: A review on how to improve dimensional inaccuracy and warpage
Martin Spoerk et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2020)
High shear capillary rheometry of cellulose nanocrystals for industrially relevant processing
Bradley P. Sutliff et al.
CARBOHYDRATE POLYMERS (2020)
Design and fabrication of transdermal drug delivery patch with milliprojections using material extrusion 3D printing
Tiffany Obog Tang et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2020)
The role of heating and cooling in viscous sintering of pairs of spheres and pairs of cylinders
Nickolas D. Polychronopoulos et al.
RAPID PROTOTYPING JOURNAL (2020)
Collective viscosity model for shear thinning polymeric materials
Sun Kyoung Kim
RHEOLOGICA ACTA (2020)
Searching for Rheological Conditions for FFF 3D Printing with PVC Based Flexible Compounds
I Calafel et al.
MATERIALS (2020)
Nonisothermal welding in fused filament fabrication
Keith Coasey et al.
ADDITIVE MANUFACTURING (2020)
Experimental and analytical study of the polymer melt flow through the hot-end in material extrusion additive manufacturing
Marcin P. Serdeczny et al.
ADDITIVE MANUFACTURING (2020)
Heating and flow computations of an amorphous polymer in the liquefier of a material extrusion 3D printer
F. Pigeonneau et al.
ADDITIVE MANUFACTURING (2020)
Upper bound of feed rates in thermoplastic material extrusion additive manufacturing
Cheng Luo et al.
ADDITIVE MANUFACTURING (2020)
A frequency-dependent effective medium model for the rheology of crystallizing polymers
Anthony Kotula
JOURNAL OF RHEOLOGY (2020)
Controlling substrate temperature with infrared heating to improve mechanical properties of large-scale printed parts *
Andrzej Nycz et al.
ADDITIVE MANUFACTURING (2020)
Computational fluid dynamics simulation of the melting process in the fused filament fabrication additive manufacturing technique
David D. Phan et al.
Additive Manufacturing (2020)
Bead parameterization of desktop and room-scale material extrusion additive manufacturing: How print speed and thermal properties affect heat transfer
Tone D'Amico et al.
ADDITIVE MANUFACTURING (2020)
Current understanding and challenges in high temperature additive manufacturing of engineering thermoplastic polymers
Ari Das et al.
ADDITIVE MANUFACTURING (2020)
Determination of thermal and thermomechanical properties of biodegradable PLA blends: for additive manufacturing process
C. O'Mahony et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2020)
Modeling the temperature profile of an extrudate in material extrusion additive manufacturing
Cheng Luo
MATERIALS LETTERS (2020)
Promotion of molecular diffusion and/or crystallization in fused deposition modeled poly(lactide) welds
Varun Srinivas et al.
POLYMER (2020)
Recent developments in polymers/polymer nanocomposites for additive manufacturing
H. Wu et al.
PROGRESS IN MATERIALS SCIENCE (2020)
How Is Rheology Involved in 3D Printing of Phase-Separated PVC-Acrylate Copolymers Obtained by Free Radical Polymerization
Mario Ivan Penas et al.
POLYMERS (2020)
Rheology and 3D Printability of Percolated Graphene-Polyamide-6 Composites
Kok Peng Marcian Lee et al.
POLYMERS (2020)
Material Extrusion Additive Manufacturing of Wood and Lignocellulosic Filled Composites
Meghan E. Lamm et al.
POLYMERS (2020)
Continuous rheological description of highly filled polymer melts for material extrusion
Petr Filip et al.
APPLIED MATERIALS TODAY (2020)
Prediction of interlayer strength in material extrusion additive manufacturing
Timothy J. Coogan et al.
ADDITIVE MANUFACTURING (2020)
Measurement of the in-plane temperature field on the build plate during polymer extrusion additive manufacturing using infrared thermometry
Hardikkumar Prajapati et al.
POLYMER TESTING (2020)
Thermo-rheological effects on successful 3D printing of biodegradable polyesters
Maria Virginia Candal et al.
ADDITIVE MANUFACTURING (2020)
Residual alignment and its effect on weld strength in material-extrusion 3D-printing of polylactic acid
Andrea Costanzo et al.
ADDITIVE MANUFACTURING (2020)
Numerical modeling of the polymer flow through the hot-end in filament-based material extrusion additive manufacturing
Marcin P. Serdeczny et al.
ADDITIVE MANUFACTURING (2020)
The in-line detection method of sharkskin melt flow instability during polyethylene extrusion based on pressure analysis
Mateusz Barczewski et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Numerical Study on the Temperature-Dependent Viscosity Effect on the Strand Shape in Extrusion-Based Additive Manufacturing
Behrouz Behdani et al.
JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING (2020)
Flow-Induced Crystallization in Polyethylene: Effect of Flow Time on Development of Shish-Kebab
Ruijun Zhao et al.
POLYMERS (2020)
Melt rheology and extrudate swell properties of talc filled polyethylene compounds
Adib Kalantar Mehrjerdi et al.
HELIYON (2020)
Material Extrusion-Based Additive Manufacturing with Blends of Polypropylene and Hydrocarbon Resins
Arit Das et al.
ACS APPLIED POLYMER MATERIALS (2020)
Influence of temperature on polymer parts manufactured by fused deposition modeling process
Deep Bhalodi et al.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2019)
Experimental and theoretical investigation of heat transfer in platform bed during polymer extrusion based additive manufacturing
Darshan Ravoori et al.
POLYMER TESTING (2019)
Polymers for additive manufacturing and 4D-printing: Materials, methodologies, and biomedical applications
Carmen M. Gonzalez-Henriquez et al.
PROGRESS IN POLYMER SCIENCE (2019)
Thermography based in-process monitoring of Fused Filament Fabrication of polymeric parts
E. Ferraris et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2019)
Semi-Crystalline Polymer Blends for Material Extrusion Additive Manufacturing Printability: A Case Study with Poly(ethylene terephthalate) and Polypropylene
Camden A. Chatham et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2019)
Review of acrylonitrile butadiene styrene in fused filament fabrication: A plastics engineering-focused perspective
Amy M. Peterson
ADDITIVE MANUFACTURING (2019)
Improving the filament weld-strength of fused filament fabrication products through improved interdiffusion
Yee Song Ko et al.
ADDITIVE MANUFACTURING (2019)
A method for predicting geometric characteristics of polymer deposition during fused-filament-fabrication
Michael Hebda et al.
ADDITIVE MANUFACTURING (2019)
Tuning the material properties of a water-soluble ionic polymer using different counterions for material extrusion additive manufacturing
Callie E. Zawaski et al.
POLYMER (2019)
Effects of nozzle temperature and building orientation on mechanical properties and microstructure of PEEK and PEI printed by 3D-FDM
Shouling Ding et al.
POLYMER TESTING (2019)
Numerical simulations of the mesostructure formation in material extrusion additive manufacturing
Marcin P. Serdeczny et al.
ADDITIVE MANUFACTURING (2019)
Rheological approach for an additive manufacturing printer based on material extrusion
Larissa Cristina Sanchez et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
A fundamental rule Determining he importance of prior to polymer crystallization
Claire McIlroy
PHYSICS OF FLUIDS (2019)
Flow analysis of the polymer spreading during extrusion additive manufacturing
Jean-Francois Agassant et al.
ADDITIVE MANUFACTURING (2019)
Mapping of deposition-stable and defect-free additive manufacturing via material extrusion from minimal experiments
George Papazetis et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Roadmap to 3D-Printed Oral Pharmaceutical Dosage Forms: Feedstock Filament Properties and Characterization for Fused Deposition Modeling
Johanna Aho et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2019)
Nonlinear rheology of polydisperse blends of entangled linear polymers: Rolie-Double-Poly models
Victor A. H. Boudara et al.
JOURNAL OF RHEOLOGY (2019)
In-line rheological monitoring of fused deposition modeling
Timothy J. Coogan et al.
JOURNAL OF RHEOLOGY (2019)
Influence of printing parameters on the stability of deposited beads in fused filament fabrication of poly(lactic) acid
Shahriar Bakrani Balani et al.
ADDITIVE MANUFACTURING (2019)
Improving fracture strength of fused filament fabrication parts via thermal annealing in a printed support shell
R. M. Dunn et al.
PROGRESS IN ADDITIVE MANUFACTURING (2019)
Improvement in build-direction thermal conductivity in extrusion-based polymer additive manufacturing through thermal annealing
Hardikkumar Prajapati et al.
ADDITIVE MANUFACTURING (2019)
Integrating digital image correlation in mechanical testing for the materials characterization of big area additive manufacturing feedstock
Kevin Schnittker et al.
ADDITIVE MANUFACTURING (2019)
In-situ monitoring of polymer flow temperature and pressure in extrusion based additive manufacturing
David A. Anderegg et al.
ADDITIVE MANUFACTURING (2019)
Planar deposition flow modeling of fiber filled composites in large area additive manufacturing
Blake P. Heller et al.
ADDITIVE MANUFACTURING (2019)
Model analysis of feedstock behavior in fused filament fabrication: Enabling rapid materials screening
Eric L. Gilmer et al.
POLYMER (2018)
Cellulose nanofibril-reinforced polypropylene composites for material extrusion: Rheological properties
Lu Wang et al.
POLYMER ENGINEERING AND SCIENCE (2018)
Anisotropic properties of oriented short carbon fibre filled polypropylene parts fabricated by extrusion-based additive manufacturing
Martin Spoerk et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Numerical simulation of the planar extrudate swell of pseudoplastic and viscoelastic fluids with the streamfunction and the VOF methods
Raphael Comminal et al.
JOURNAL OF NON-NEWTONIAN FLUID MECHANICS (2018)
Pressure and shear rate dependence of the viscosity and stress relaxation of polymer melts
Carl Reynolds et al.
JOURNAL OF RHEOLOGY (2018)
Evaluating models for polycaprolactone crystallization via simultaneous rheology and Raman spectroscopy
Anthony P. Kotula et al.
JOURNAL OF RHEOLOGY (2018)
Increased fracture toughness of additively manufactured amorphous thermoplastics via thermal annealing
Kevin R. Hart et al.
POLYMER (2018)
Fully resolved numerical simulations of fused deposition modeling. Part I: fluid flow
Huanxiong Xia et al.
RAPID PROTOTYPING JOURNAL (2018)
Polylactide (PLA) Filaments a Biobased Solution for Additive Manufacturing: Correlating Rheology and Thermomechanical Properties with Printing Quality
Gianluca Cicala et al.
MATERIALS (2018)
Fatigue performance of fused filament fabrication PLA specimens
Giovanni Gomez-Gras et al.
MATERIALS & DESIGN (2018)
Multiphysics modelling of manufacturing processes: A review
Masoud Jabbari et al.
ADVANCES IN MECHANICAL ENGINEERING (2018)
The influence of dynamic rheological properties on carbon fiber-reinforced polyetherimide for large-scale extrusion-based additive manufacturing
Christine Ajinjeru et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Rheological and heat transfer effects in fused filament fabrication
David D. Phan et al.
JOURNAL OF RHEOLOGY (2018)
Effect of processing conditions on crystallization kinetics during materials extrusion additive manufacturing
Lily A. Northcutt et al.
POLYMER (2018)
Expanding the application of the van Gurp-Palmen plot: New insights into polymer melt rheology
Zhiyuan Qian et al.
POLYMER (2018)
What makes a material printable? A viscoelastic model for extrusion-based 3D printing of polymers
Chad Duty et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
Rheology, crystal structure, and nanomechanical properties in large-scale additive manufacturing of polyphenylene sulfide/carbon fiber composites
Peng Liu et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2018)
The importance of rheological behavior in the additive manufacturing technique material extrusion
Michael E. Mackay
JOURNAL OF RHEOLOGY (2018)
Determination of melt processing conditions for high performance amorphous thermoplastics for large format additive manufacturing
Christine Ajinjeru et al.
ADDITIVE MANUFACTURING (2018)
Effect of initial filament moisture content on the microstructure and mechanical performance of ULTEM® 9085 3D printed parts
R. J. Zaldivar et al.
ADDITIVE MANUFACTURING (2018)
general method to improve 3D-printability and inter-layer adhesion in lignin-based composites
Ngoc A. Nguyen et al.
APPLIED MATERIALS TODAY (2018)
Numerical modeling of the strand deposition flow in extrusion-based additive manufacturing
Raphael Comminal et al.
ADDITIVE MANUFACTURING (2018)
Additive manufacturing of heat-sensitive polymer melt using a pellet-fed material extrusion
Zuoxin Zhou et al.
ADDITIVE MANUFACTURING (2018)
Measurement and modeling of filament temperature distribution in the standoff gap between nozzle and bed in polymer-based additive manufacturing
Hardikkumar Prajapati et al.
ADDITIVE MANUFACTURING (2018)
Experimental validation of a numerical model for the strand shape in material extrusion additive manufacturing
Marcin P. Serdeczny et al.
ADDITIVE MANUFACTURING (2018)
Interlayer bonding improvement of material extrusion parts with polyphenylene sulfide using the Taguchi method
Emily R. Fitzharris et al.
ADDITIVE MANUFACTURING (2018)
Complex flow and temperature history during melt extrusion in material extrusion additive manufacturing
Fang Peng et al.
ADDITIVE MANUFACTURING (2018)
An adaptable FEA simulation of material extrusion additive manufacturing heat transfer in 3D
Anthony D'Amico et al.
ADDITIVE MANUFACTURING (2018)
Fused filament fabrication melting model
Tim A. Osswald et al.
ADDITIVE MANUFACTURING (2018)
Additive manufacturing tooling for the automotive industry
R. Leal et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Estimation of filament temperature and adhesion development in fused deposition techniques
S. F. Costa et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
The performance of the hot end in a plasticating 3D printer
Michael E. Mackay et al.
JOURNAL OF RHEOLOGY (2017)
Deformation of an amorphous polymer during the fused-filament-fabrication method for additive manufacturing
Claire McIlroy et al.
JOURNAL OF RHEOLOGY (2017)
Shrinkage and Warpage Optimization of Expanded-Perlite-Filled Polypropylene Composites in Extrusion-Based Additive Manufacturing
Martin Spoerk et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2017)
Disentanglement effects on welding behaviour of polymer melts during the fused-filament-fabrication method for additive manufacturing
C. McIlroy et al.
POLYMER (2017)
Healing simulation for bond strength prediction of FDM
Timothy J. Coogan et al.
RAPID PROTOTYPING JOURNAL (2017)
Bond and part strength in fused deposition modeling
Timothy J. Coogan et al.
RAPID PROTOTYPING JOURNAL (2017)
Structure and mechanical behavior of Big Area Additive Manufacturing (BAAM) materials
Chad E. Duty et al.
RAPID PROTOTYPING JOURNAL (2017)
Weld formation during material extrusion additive manufacturing
Jonathan E. Seppala et al.
SOFT MATTER (2017)
Numerical investigation of the influence of process conditions on the temperature variation in fused deposition modeling
Jie Zhang et al.
MATERIALS & DESIGN (2017)
Toward improvement of the properties of parts manufactured by FFF (Fused Filament Fabrication) through understanding the influence of temperature and rheological behaviour on the coalescence phenomenon
Bakrani Balani Shahriar et al.
PROCEEDINGS OF THE 20TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2017) (2017)
A review on additive manufacturing of polymer-fiber composites
Pedram Parandoush et al.
COMPOSITE STRUCTURES (2017)
Polymers for 3D Printing and Customized Additive Manufacturing
Samuel Clark Ligon et al.
CHEMICAL REVIEWS (2017)
Rate limits of additive manufacturing by fused filament fabrication and guidelines for high-throughput system design
Jamison Go et al.
ADDITIVE MANUFACTURING (2017)
Investigation of the adhesion properties of direct 3D printing of polymers and nanocomposites on textiles: Effect of FDM printing process parameters
Razieh Hashemi Sanatgar et al.
APPLIED SURFACE SCIENCE (2017)
Infrared preheating to improve interlayer strength of big area additive manufacturing (BAAM) components
Vidya Kishore et al.
ADDITIVE MANUFACTURING (2017)
Additive manufacturing of metals
Dirk Herzog et al.
ACTA MATERIALIA (2016)
Evaluation of the effect of reprocessing on the structure and properties of low density polyethylene/thermoplastic starch blends
Anderson M. Peres et al.
CARBOHYDRATE POLYMERS (2016)
3D-printing technologies for electrochemical applications
Adriano Ambrosi et al.
CHEMICAL SOCIETY REVIEWS (2016)
3D printing with polymers: Challenges among expanding options and opportunities
Jeffrey W. Stansbury et al.
DENTAL MATERIALS (2016)
Interfacial mechanical behavior of 3D printed ABS
Daniel P. Cole et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2016)
The effect of damping function on extrudate swell
Vinod Kumar Konaganti et al.
JOURNAL OF NON-NEWTONIAN FLUID MECHANICS (2016)
Additive manufacturing of boron carbide via continuous filament direct ink writing of aqueous ceramic suspensions
William J. Costakis et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2016)
Rheological properties of wood polymer composites at high shear rates
Krzysztof Lewandowski et al.
POLYMER TESTING (2016)
Advances in healing-on-demand polymers and polymer composites
Pengfei Zhang et al.
PROGRESS IN POLYMER SCIENCE (2016)
Infrared thermography of welding zones produced by polymer extrusion additive manufacturing
Jonathan E. Seppala et al.
ADDITIVE MANUFACTURING (2016)
Effects of extrudate swell and nozzle geometry on fiber orientation in Fused Filament Fabrication nozzle flow
Blake P. Heller et al.
ADDITIVE MANUFACTURING (2016)
Rheology as a tool for evaluation of melt processability of innovative dosage forms
Johanna Aho et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)
Perspectives on the viscoelasticity and flow behavior of entangled linear and branched polymers
F. Snijkers et al.
JOURNAL OF PHYSICS-CONDENSED MATTER (2015)
A review of melt extrusion additive manufacturing processes: II. Materials, dimensional accuracy, and surface roughness
Brian N. Turner et al.
RAPID PROTOTYPING JOURNAL (2015)
Fused deposition modeling with polypropylene
O. S. Carneiro et al.
MATERIALS & DESIGN (2015)
Extensional rheology of shear-thickening fumed silica nanoparticles dispersed in an aqueous polyethylene oxide solution
Sunilkumar Khandavalli et al.
JOURNAL OF RHEOLOGY (2014)
Experimental study of the melt fracture behavior of filled high-density polyethylene melts
Francesco Baldi et al.
POLYMER ENGINEERING AND SCIENCE (2014)
A review of melt extrusion additive manufacturing processes: I. Process design and modeling
Brian N. Turner et al.
RAPID PROTOTYPING JOURNAL (2014)
Mechanical properties of commercial rapid prototyping materials
Jaroslaw Kotlinski
RAPID PROTOTYPING JOURNAL (2014)
Developments in construction-scale additive manufacturing processes
S. Lim et al.
AUTOMATION IN CONSTRUCTION (2012)
Thermo-mechanical properties of a highly filled polymeric composites for Fused Deposition Modeling
M. Nikzad et al.
MATERIALS & DESIGN (2011)
A review of nonlinear oscillatory shear tests: Analysis and application of large amplitude oscillatory shear (LAOS)
Kyu Hyun et al.
PROGRESS IN POLYMER SCIENCE (2011)
Elastic Properties of Polymer Melts Filled with Nanoparticles
Helmut Muenstedt et al.
NOVEL TRENDS IN RHEOLOGY IV (2011)
A study of melt flow analysis of an ABS-Iron composite in fused deposition modelling process
Nikzad Mostafa et al.
TSINGHUA SCIENCE AND TECHNOLOGY (2009)
Semi-empirical, squeeze flow and intermolecular diffusion model. I. Determination of model parameters
David Grewell et al.
POLYMER ENGINEERING AND SCIENCE (2008)
Effect of processing conditions on the bonding quality of FDM polymer filaments
Q. Sun et al.
RAPID PROTOTYPING JOURNAL (2008)
Melt flow behaviour of poly-ε-caprolactone in fused deposition modelling
H. S. Ramanath et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2008)
Welding of plastics: Fundamentals and new developments
D. Grewell et al.
INTERNATIONAL POLYMER PROCESSING (2007)
Effect of annealing time on the self-nucleation behavior of semicrystalline polymers
Arnaldo T. Lorenzo et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2006)
Influence of type and content of various comonomers on long-chain branching of ethene/α-olefin copolymers
FJ Stadler et al.
MACROMOLECULES (2006)
Absorption of CO2 in high acrylonitrile content copolymers:: dependence on acrylonitrile content
MJ Bortner et al.
POLYMER (2004)
Liquefier dynamics in fused deposition
A Bellini et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2004)
Design of fused-deposition ABS components for stiffness and strength
JF Rodríguez et al.
JOURNAL OF MECHANICAL DESIGN (2003)
Extensional rheometry of entangled solutions
PK Bhattacharjee et al.
MACROMOLECULES (2002)
Long-chain branching in metallocene-catalyzed polyethylenes investigated by low oscillatory shear and uniaxial extensional rheometry
A Malmberg et al.
MACROMOLECULES (2002)
Using filament stretching rheometry to predict strand formation and processability in adhesives and other non-Newtonian fluids
A Tripathi et al.
RHEOLOGICA ACTA (2000)
Research on the bonding of material paths in melted extrusion modeling
YN Yan et al.
MATERIALS & DESIGN (2000)
How to extract the Newtonian viscosity from capillary breakup measurements in a filament rheometer
GH McKinley et al.
JOURNAL OF RHEOLOGY (2000)
分享论文
