相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。The influence of pulsed laser powder bed fusion process parameters on Inconel 718 material properties
Konstantinos Georgilas et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Selective laser melting of 304L stainless steel: Role of volumetric energy density on the microstructure, texture and mechanical properties
Milad Ghayoor et al.
ADDITIVE MANUFACTURING (2020)
Surface roughness and densification correlation for direct metal laser sintering
Faridreza Attarzadeh et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Non-destructive quality control methods in additive manufacturing: a survey
Paschalis Charalampous et al.
RAPID PROTOTYPING JOURNAL (2020)
Multiaxial fatigue of LB-PBF additive manufactured 17-4 PH stainless steel including the effects of surface roughness and HIP treatment and comparisons with the wrought alloy
Reza Molaei et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Analysis of the effect of surface roughness on fatigue performance of powder bed fusion additive manufactured metals
Niloofar Sanaei et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2020)
Powder incorporation and spatter formation in high deposition rate blown powder directed energy deposition
Himani Siva Prasad et al.
ADDITIVE MANUFACTURING (2020)
Modeling and Optimization Approaches of Laser-Based Powder-Bed Fusion Process for Ti-6Al-4V Alloy
Behzad Fotovvati et al.
COATINGS (2020)
Effect of powder bed fusion laser melting process parameters, build orientation and strut thickness on porosity, accuracy and tensile properties of an auxetic structure in IN718 alloy
L. Delcuse et al.
ADDITIVE MANUFACTURING (2020)
Finite Element Analysis of Orthopedic Hip Implant with Functionally Graded Bioinspired Lattice Structures
Nikolaos Kladovasilakis et al.
BIOMIMETICS (2020)
Polymers for additive manufacturing and 4D-printing: Materials, methodologies, and biomedical applications
Carmen M. Gonzalez-Henriquez et al.
PROGRESS IN POLYMER SCIENCE (2019)
Additive manufacturing of Ti6Al4V alloy: A review
Shunyu Liu et al.
MATERIALS & DESIGN (2019)
Influence of the focus offset on the defects, microstructure, and mechanical properties of an Inconel 718 superalloy fabricated by electron beam additive manufacturing
Hae-Jin Lee et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Wire and Arc Additive Manufacturing of Aluminum Components
Markus Koehler et al.
METALS (2019)
Effect of Process Parameters on the Generated Surface Roughness of Down-Facing Surfaces in Selective Laser Melting
Amal Charles et al.
APPLIED SCIENCES-BASEL (2019)
Process-property-geometry correlations for additively-manufactured Ti-6Al-4V sheets
Behzad Fotovvati et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
State of the Art in Directed Energy Deposition: From Additive Manufacturing to Materials Design
Adrita Dass et al.
COATINGS (2019)
Size effects on geometrical accuracy for additive manufacturing of Ti-6Al-4V ELI parts
Behzad Fotovvati et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Influence of Powder Deposition on Powder Bed and Specimen Properties
Steffen Beitz et al.
MATERIALS (2019)
On hybrid cellular materials based on triply periodic minimal surfaces with extreme mechanical properties
Zeyao Chen et al.
MATERIALS & DESIGN (2019)
Powders for powder bed fusion: a review
Silvia Vock et al.
PROGRESS IN ADDITIVE MANUFACTURING (2019)
Microarchitected Stretching-Dominated Mechanical Metamaterials with Minimal Surface Topologies
Oraib Al-Ketan et al.
ADVANCED ENGINEERING MATERIALS (2018)
Additive manufacturing of metallic components - Process, structure and properties
T. DebRoy et al.
PROGRESS IN MATERIALS SCIENCE (2018)
Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review
Y. Kok et al.
MATERIALS & DESIGN (2018)
A critical review of powder-based additive manufacturing of ferrous alloys: Process parameters, microstructure and mechanical properties
Haniyeh Fayazfar et al.
MATERIALS & DESIGN (2018)
Horizontal dimensional accuracy prediction of selective laser melting
Luo Zhang et al.
MATERIALS & DESIGN (2018)
Mitigation of lack of fusion defects in powder bed fusion additive manufacturing
T. Mukherjee et al.
JOURNAL OF MANUFACTURING PROCESSES (2018)
Topology-mechanical property relationship of 3D printed strut, skeletal, and sheet based periodic metallic cellular materials
Oraib Al-Ketan et al.
ADDITIVE MANUFACTURING (2018)
Achieving low surface roughness AlSi10Mg_200C parts using direct metal laser sintering
Mohsen Mohammadi et al.
ADDITIVE MANUFACTURING (2018)
Effect of selective laser melting (SLM) process parameters on microstructure and mechanical properties of 316L austenitic stainless steel
E. Liverani et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Nanolattices: An Emerging Class of Mechanical Metamaterials
Jens Bauer et al.
ADVANCED MATERIALS (2017)
Prediction of lack-of-fusion porosity for powder bed fusion
Ming Tang et al.
ADDITIVE MANUFACTURING (2017)
Effect of processing parameters on microstructure and tensile properties of austenitic stainless steel 304L made by directed energy deposition additive manufacturing
Zhuqing Wang et al.
ACTA MATERIALIA (2016)
Metal Additive Manufacturing: A Review of Mechanical Properties
John J. Lewandowski et al.
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 46 (2016)
Hybrid additive and subtractive machine tools - Research and industrial developments
Joseph M. Flynn et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2016)
Mechanical behavior of additive manufactured, powder-bed laser-fused materials
Todd M. Mower et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Correlation between porosity and processing parameters in TiAl6V4 produced by selective laser melting
Galina Kasperovich et al.
MATERIALS & DESIGN (2016)
Printability of alloys for additive manufacturing
T. Mukherjee et al.
SCIENTIFIC REPORTS (2016)
Anisotropic tensile behavior of Ti-6Al-4V components fabricated with directed energy deposition additive manufacturing
Beth E. Carroll et al.
ACTA MATERIALIA (2015)
Wire-feed additive manufacturing of metal components: technologies, developments and future interests
Donghong Ding et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Characterization and Control of Powder Properties for Additive Manufacturing
A. Strondl et al.
JOM (2015)
Evaluation of Orientation Dependence of Fracture Toughness and Fatigue Crack Propagation Behavior of As-Deposited ARCAM EBM Ti-6Al-4V
Mohsen Seifi et al.
JOM (2015)
An experimental study into the effects of bulk and flow behaviour of laser sintering polymer powders on resulting part properties
Stefan Ziegelmeier et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2015)
Review of selective laser melting: Materials and applications
C. Y. Yap et al.
APPLIED PHYSICS REVIEWS (2015)
Metal Additive Manufacturing: A Review
William E. Frazier
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2014)
Characterization of stainless steel parts by Laser Metal Deposition Shaping
Kai Zhang et al.
MATERIALS & DESIGN (2014)
Effect of the build orientation on the mechanical properties and fracture modes of SLM Ti-6A1-4V
M. Simonelli et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Influence of Annealing on Mechanical Properties of Al-20Si Processed by Selective Laser Melting
Pan Ma et al.
METALS (2014)
Infrared Thermography for Laser-Based Powder Bed Fusion Additive Manufacturing Processes
Shawn Moylan et al.
40TH ANNUAL REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION: INCORPORATING THE 10TH INTERNATIONAL CONFERENCE ON BARKHAUSEN NOISE AND MICROMAGNETIC TESTING, VOLS 33A & 33B (2014)
Influence of process parameters on surface roughness of aluminum parts produced by DMLS
F. Calignano et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Structural integrity of direct metal laser sintered parts subjected to thermal and finishing treatments
C. Sanz et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)
Microstructure and tensile properties of selectively laser-melted and of HIPed laser-melted Ti-6Al-4V
Chunlei Qiu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Influence of process parameters on part quality and mechanical properties for DMLS and SLM with iron-based materials
Jordi Delgado et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)
Morphology, microstructure, and hardness of titanium (Ti-6Al-4V) blocks deposited by wire-feed additive layer manufacturing (ALM)
Erhard Brandl et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Property evaluation of 304L stainless steel fabricated by selective laser melting
K. Abd-Elghany et al.
RAPID PROTOTYPING JOURNAL (2012)
Optimal part orientation in Rapid Manufacturing process for achieving geometric tolerances
Ratnadeep Paul et al.
JOURNAL OF MANUFACTURING SYSTEMS (2011)
Tensile Properties and Microstructures of Laser-Formed Ti-6Al-4V
J. Alcisto et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2011)
As-Fabricated and Heat-Treated Microstructures of the Ti-6Al-4V Alloy Processed by Selective Laser Melting
T. Vilaro et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2011)
Influence of the particle size distribution on surface quality and mechanical properties in AM steel parts
A. B. Spierings et al.
RAPID PROTOTYPING JOURNAL (2011)
Manufacture by selective laser melting and mechanical behavior of a biomedical Ti-24Nb-4Zr-8Sn alloy
L. C. Zhang et al.
SCRIPTA MATERIALIA (2011)
Surface integrity of selective-laser-melted components
E. Brinksmeier et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2010)
Selective Laser Melting of thin wall parts using pulse shaping
K. A. Mumtaz et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2010)
Plastic Deformation, Failure and Energy Absorption of Sandwich Structures with Metallic Cellular Cores
Feng Zhu et al.
INTERNATIONAL JOURNAL OF PROTECTIVE STRUCTURES (2010)
Effect of delay time on part strength in selective laser sintering
Prashant K. Jain et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2009)
Pore Formation in Laser-Assisted Powder Deposition Process
L. Wang et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2009)
Influence of building strategies on the accuracy of parts in selective laser sintering
K. Senthilkumaran et al.
MATERIALS & DESIGN (2009)
Top surface and side roughness of Inconel 625 parts processed using selective laser melting
Kamran Mumtaz et al.
RAPID PROTOTYPING JOURNAL (2009)
A comparative study of wire feeding and powder feeding in direct diode laser deposition for rapid prototyping
WUH Syed et al.
APPLIED SURFACE SCIENCE (2005)
Improvement of surface finishing and corrosion resistance of prototypes produced by direct metal laser sintering
S Rossi et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
Direct laser sintering of a copper-based alloy for creating three-dimensional metal parts
Y Tang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
分享论文
