相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Strong adsorption, catalysis and lithiophilic modulation of carbon nitride for lithium/sulfur battery
Lei Ji et al.
NANOTECHNOLOGY (2021)
Vertically Aligned Carbon Nanofibers on Cu Foil as a 3D Current Collector for Reversible Li Plating/Stripping toward High-Performance Li-S Batteries
Yazhou Chen et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
A Review of Composite Lithium Metal Anode for Practical Applications
Peng Shi et al.
ADVANCED MATERIALS TECHNOLOGIES (2020)
Ultrathin Defective C-N Coating to Enable Nanostructured Li Plating for Li Metal Batteries
Qifan Yang et al.
ACS NANO (2020)
Advances in Artificial Layers for Stable Lithium Metal Anodes
Liya Qi et al.
CHEMISTRY-A EUROPEAN JOURNAL (2020)
Two-Dimensional Material-Functionalized Separators for High-Energy-Density Metal-Sulfur and Metal-Based Batteries
Yuxiang Hu et al.
CHEMSUSCHEM (2020)
In situ fluorinated solid electrolyte interphase towards long-life lithium metal anodes
Shan-Min Xu et al.
NANO RESEARCH (2020)
In Situ Generation of Artificial Solid-Electrolyte Interphases on 3D Conducting Scaffolds for High-Performance Lithium-Metal Anodes
Pengbo Zhai et al.
ADVANCED ENERGY MATERIALS (2020)
High-Efficiency Lithium Metal Anode Enabled by a Concentrated/ Fluorinated Ester Electrolyte
Shijian Chen et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
A Mixed Lithium-Ion Conductive Li2S/Li2Se Protection Layer for Stable Lithium Metal Anode
Fanfan Liu et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
Grafting polyethyleneimine on electrospun nanofiber separator to stabilize lithium metal anode for lithium sulfur batteries
Mengfei Hu et al.
CHEMICAL ENGINEERING JOURNAL (2020)
Cerium oxide embedded bilayer separator enabling fast polysulfide conversion for high-performance lithium-sulfur batteries
Jiawen Zhang et al.
CHEMICAL ENGINEERING JOURNAL (2020)
Artificial Solid Electrolyte Interphase Acting as Armor to Protect the Anode Materials for High-performance Lithium-ion Battery
Haitao Wang et al.
CHEMICAL RESEARCH IN CHINESE UNIVERSITIES (2020)
Synthesis and electrochemical performance of (100? x )Li 7 P 3 S 11-x Li 2 OHBr composite solid electrolyte for all -solid-state lithium batteries
Su-Yeon Jung et al.
JOURNAL OF ENERGY CHEMISTRY (2020)
Sulfur-Rich Molybdenum Sulfide as an Anode Coating to Improve Performance of Lithium Metal Batteries
Melissa L. Meyerson et al.
CHEMELECTROCHEM (2020)
Nickel phosphate nanorod-enhanced polyethylene oxide-based composite polymer electrolytes for solid-state lithium batteries
Zhijun Wu et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2020)
Regulating the Hidden Solvation-Ion-Exchange in Concentrated Electrolytes for Stable and Safe Lithium Metal Batteries
Rachid Amine et al.
ADVANCED ENERGY MATERIALS (2020)
Three dimensional porous frameworks for lithium dendrite suppression
Shuyan Ni et al.
JOURNAL OF ENERGY CHEMISTRY (2020)
Strategies to Improve the Performance of Li Metal Anode for Rechargeable Batteries
Zhongliang Hu et al.
FRONTIERS IN CHEMISTRY (2020)
Mesoporous Silica Reinforced Hybrid Polymer Artificial Layer for High-Energy and Long-Cycling Lithium Metal Batteries
Chen Wu et al.
ACS ENERGY LETTERS (2020)
Dynamic Intelligent Cu Current Collectors for Ultrastable Lithium Metal Anodes
Jianyu Chen et al.
NANO LETTERS (2020)
Functional Localized High-Concentration Ether-Based Electrolyte for Stabilizing High-Voltage Lithium-Metal Battery
Shuangshuang Lin et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Biomimetic Molecule Catalysts to Promote the Conversion of Polysulfides for Advanced Lithium-Sulfur Batteries
Xinwei Ding et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
Towards high-performance lithium metal anodes via the modification of solid electrolyte interphases
Zhen Hou et al.
JOURNAL OF ENERGY CHEMISTRY (2020)
PDA modified commercial paper separator engineering with excellent lithiophilicity and mechanical strength for lithium metal batteries
Mei-Ling Zhou et al.
JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2020)
Cotton-derived carbon cloth enabling dendrite-free Li deposition for lithium metal batteries
Jing-Ke Meng et al.
JOURNAL OF POWER SOURCES (2020)
A robust electrospun separator modified with in situ grown metal-organic frameworks for lithium-sulfur batteries
Cheng Zhou et al.
CHEMICAL ENGINEERING JOURNAL (2020)
Nonwoven rGO Fiber-Aramid Separator for High-Speed Charging and Discharging of Li Metal Anode
Yong Jun Gong et al.
ADVANCED ENERGY MATERIALS (2020)
Pristine MOF and COF materials for advanced batteries
Chao Li et al.
ENERGY STORAGE MATERIALS (2020)
3D lithiophilic-lithiophobic-lithiophilic dual-gradient porous skeleton for highly stable lithium metal anode
Hongfei Zheng et al.
JOURNAL OF MATERIALS CHEMISTRY A (2020)
A universal and facile approach to suppress dendrite formation for a Zn and Li metal anode
Jin Cao et al.
JOURNAL OF MATERIALS CHEMISTRY A (2020)
Robust pure copper framework by extrusion 3D printing for advanced lithium metal anodes
Gwendolyn J. H. Lim et al.
JOURNAL OF MATERIALS CHEMISTRY A (2020)
A Janus protein-based nanofabric for trapping polysulfides and stabilizing lithium metal in lithium-sulfur batteries
Min Chen et al.
JOURNAL OF MATERIALS CHEMISTRY A (2020)
A leaf-like Al2O3-based quasi-solid electrolyte with a fast Li+ conductive interface for stable lithium metal anodes
Ziyue Wen et al.
JOURNAL OF MATERIALS CHEMISTRY A (2020)
Slurry-Coated Sulfur/Sulfide Cathode with Li Metal Anode for All-Solid-State Lithium-Sulfur Pouch Cells
Hong Yuan et al.
BATTERIES & SUPERCAPS (2020)
Regeneration of Polyolefin Separators from Spent Li-Ion Battery for Second Life
Subramanian Natarajan et al.
BATTERIES & SUPERCAPS (2020)
Suppressing Dendrite Growth of a Lithium Metal Anode by Modifying Conventional Polypropylene Separators with a Composite Layer
Tao Zhang et al.
ACS APPLIED ENERGY MATERIALS (2020)
In situ formation of a LiF and Li-Al alloy anode protected layer on a Li metal anode with enhanced cycle life
Lili Wang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2020)
Highly stable lithium metal anode with near-zero volume change enabled by capped 3D lithophilic framework
Yangyang Feng et al.
ENERGY STORAGE MATERIALS (2020)
Rearrange SEI with artificial organic layer for stable lithium metal anode
Danmiao Kang et al.
ENERGY STORAGE MATERIALS (2020)
Understanding and suppression strategies toward stable Li metal anode for safe lithium batteries
Ghulam Yasin et al.
ENERGY STORAGE MATERIALS (2020)
Additive-Assisted Novel Dual-Salt Electrolyte Addresses Wide Temperature Operation of Lithium-Metal Batteries
Xuehui Shangguan et al.
SMALL (2019)
Porous LiF layer fabricated by a facile chemical method toward dendrite-free lithium metal anode
Yanxia Yuan et al.
JOURNAL OF ENERGY CHEMISTRY (2019)
High-Energy Density Li metal Dual-Ion Battery with a Lithium Nitrate-Modified Carbonate-Based Electrolyte
Li-Na Wu et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
An artificial Li3PO4 solid electrolyte interphase layer to achieve petal-shaped deposition of lithium
Maohui Bai et al.
SOLID STATE IONICS (2019)
Conductivity and lithiophilicity gradients guide lithium deposition to mitigate short circuits
Jun Pu et al.
NATURE COMMUNICATIONS (2019)
Magnetic Field-Suppressed Lithium Dendrite Growth for Stable Lithium-Metal Batteries
Kang Shen et al.
ADVANCED ENERGY MATERIALS (2019)
Robust Lithium Metal Anodes Realized by Lithiophilic 3D Porous Current Collectors for Constructing High-Energy Lithium-Sulfur Batteries
Fei Pei et al.
ACS NANO (2019)
Nanocoating inside porous PE separator enables enhanced ionic transport of GPE and stable cycling of Li-metal anode
Lixin Fu et al.
RESEARCH ON CHEMICAL INTERMEDIATES (2019)
Nanostructured Metal-Organic Framework (MOF)-Derived Solid Electrolytes Realizing Fast Lithium Ion Transportation Kinetics in Solid-State Batteries (vol 15, 1804413, 2019)
Jian-Fang Wu et al.
SMALL (2019)
Effect of the Quantity of Liquid Electrolyte on Self-Healing Electrostatic Shield Mechanism of CsPF6 Additive for Li Metal Anodes
Byeolhee Yoon et al.
ACS OMEGA (2019)
Fundamentals of inorganic solid-state electrolytes for batteries
Theodosios Famprikis et al.
NATURE MATERIALS (2019)
Li Alginate-Based Artificial SEI Layer for Stable Lithium Metal Anodes
Yicheng Zhong et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Effects of transition metal cation additives on the passivation of lithium metal anode in Li-S batteries
Wenduo Zeng et al.
ELECTROCHIMICA ACTA (2019)
Metal-Organic Frameworks as Electrolyte Additives To Enable Ultrastable Plating/Stripping of Li Anode with Dendrite Inhibition
Fulu Chu et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
A Novel Organic Polyurea Thin Film for Ultralong-Life Lithium-Metal Anodes via Molecular-Layer Deposition
Yipeng Sun et al.
ADVANCED MATERIALS (2019)
A Review of Carbon-Based Materials for Safe Lithium Metal Anodes
Yan Liu et al.
FRONTIERS IN CHEMISTRY (2019)
Highly Adhesive Li-BN Nanosheet Composite Anode with Excellent Interfacial Compatibility for Solid-State Li Metal Batteries
Jiayun Wen et al.
ACS NANO (2019)
Thermally reduced graphene paper with fast Li ion diffusion for stable Li metal anode
Yikang Yu et al.
ELECTROCHIMICA ACTA (2019)
Accumulation of Glassy Poly(ethylene oxide) Anchored in a Covalent Organic Framework as a Solid-State Li+ Electrolyte
Gen Zhang et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)
Recent Advances in Energy Chemistry between Solid-State Electrolyte and Safe Lithium-Metal Anodes
Xin-Bing Cheng et al.
CHEM (2019)
Lithiophilic Ag Nanoparticle Layer on Cu Current Collector toward Stable Li Metal Anode
Zhen Hou et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Methods to Improve Lithium Metal Anode for Li-S Batteries
Xiaosong Xiong et al.
FRONTIERS IN CHEMISTRY (2019)
Suppressing dendrite growth by a functional electrolyte additive for robust Li metal anodes
Gang Wang et al.
ENERGY STORAGE MATERIALS (2019)
A SuperLEphilic/Superhydrophobic and Thermostable Separator Based on Silicone Nanofilaments for Li Metal Batteries
Yanfei Yang et al.
ISCIENCE (2019)
Comparative Study of Ethylene Carbonate-Based Electrolyte Decomposition at Li, Ca, and Al Anode Interfaces
Joshua Young et al.
ACS APPLIED ENERGY MATERIALS (2019)
Toward Practical Li Metal Batteries: Importance of Separator Compatibility Using Ionic Liquid Electrolytes
Mojtaba Eftekharnia et al.
ACS APPLIED ENERGY MATERIALS (2019)
PMMA-assisted Li deposition towards 3D continuous dendrite-free lithium anode
Yanpeng Guo et al.
ENERGY STORAGE MATERIALS (2019)
Spatially uniform deposition of lithium metal in 3D Janus hosts
Bo Hong et al.
ENERGY STORAGE MATERIALS (2019)
A Janus nanofiber-based separator for trapping polysulfides and facilitating ion-transport in lithium-sulfur batteries
Lushi Kong et al.
NANOSCALE (2019)
High-Efficiency Lithium-Metal Anode Enabled by Liquefied Gas Electrolytes
Yangyuchen Yang et al.
JOULE (2019)
Garnet-Polymer Composite Electrolytes: New Insights on Local Li-Ion Dynamics and Electrodeposition Stability with Li Metal Anodes
Jakub Zagorski et al.
ACS APPLIED ENERGY MATERIALS (2019)
Surface-Based Li+ Complex Enables Uniform Lithium Deposition for Stable Lithium Metal Anodes
Qian Wang et al.
ACS APPLIED ENERGY MATERIALS (2019)
Flower-shaped lithium nitride as a protective layer via facile plasma activation for stable lithium metal anodes
Ke Chen et al.
ENERGY STORAGE MATERIALS (2019)
A corrosion-resistant current collector for lithium metal anodes
Xinyue Zhang et al.
ENERGY STORAGE MATERIALS (2019)
Sulfuryl chloride as a functional additive towards dendrite-free and long-life Li metal anodes
Xiangxiang Fu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2019)
Review-From Nano Size Effect to In Situ Wrapping: Rational Design of Cathode Structure for High Performance Lithium-Sulfur Batteries
Hongwei Chen et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)
Design Principles of Functional Polymer Separators for High-Energy, Metal-Based Batteries
Weidong Zhang et al.
SMALL (2018)
Lithium Dendrite Suppression and Enhanced Interfacial Compatibility Enabled by an Ex Situ SEI on Li Anode for LAGP-Based All-Solid-State Batteries
Guangmei Hou et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
High-Voltage Lithium-Metal Batteries Enabled by Localized High-Concentration Electrolytes
Shuru Chen et al.
ADVANCED MATERIALS (2018)
Dual-Layered Film Protected Lithium Metal Anode to Enable Dendrite-Free Lithium Deposition
Chong Yan et al.
ADVANCED MATERIALS (2018)
Reviving lithium cobalt oxide-based lithium secondary batteries-toward a higher energy density
Longlong Wang et al.
CHEMICAL SOCIETY REVIEWS (2018)
The role of the solid electrolyte interphase layer in preventing Li dendrite growth in solid-state batteries
Bingbin Wu et al.
ENERGY & ENVIRONMENTAL SCIENCE (2018)
Ultrathin Al2O3-coated reduced graphene oxide membrane for stable lithium metal anode
Fan Zhang et al.
RARE METALS (2018)
Porphyrin-Derived Graphene-Based Nanosheets Enabling Strong Polysulfide Chemisorption and Rapid Kinetics in Lithium-Sulfur Batteries
Long Kong et al.
ADVANCED ENERGY MATERIALS (2018)
Highly Fluorinated Interphases Enable High-Voltage Li-Metal Batteries
Xiulin Fan et al.
CHEM (2018)
Localized High-Concentration Sulfone Electrolytes for High-Efficiency Lithium-Metal Batteries
Xiaodi Ren et al.
CHEM (2018)
A high-energy-density lithium-oxygen battery based on a reversible four-electron conversion to lithium oxide
C. Xia et al.
SCIENCE (2018)
Uniform Nucleation of Lithium in 3D Current Collectors via Bromide Intermediates for Stable Cycling Lithium Metal Batteries
Hui Duan et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)
Enabling reliable lithium metal batteries by a bifunctional anionic electrolyte additive
Yulin Ma et al.
ENERGY STORAGE MATERIALS (2018)
Recent progress and perspective on lithium metal anode protection
Huijun Yang et al.
ENERGY STORAGE MATERIALS (2018)
An Artificial Solid Electrolyte Interphase with High Li-Ion Conductivity, Mechanical Strength, and Flexibility for Stable Lithium Metal Anodes
Yayuan Liu et al.
ADVANCED MATERIALS (2017)
Poly(dimethylsiloxane) Thin Film as a Stable Interfacial Layer for High-Performance Lithium-Metal Battery Anodes
Bin Zhu et al.
ADVANCED MATERIALS (2017)
Negating interfacial impedance in garnet-based solid-state Li metal batteries
Xiaogang Han et al.
NATURE MATERIALS (2017)
Conductivity, Viscosity, and Their Correlation of a Super Concentrated Aqueous Electrolyte
Michael S. Ding et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2017)
Dilution of Highly Concentrated LiBF4/Propylene Carbonate Electrolyte Solution with Fluoroalkyl Ethers for 5-V LiNi0.5Mn1.5O4 Positive Electrodes
Takayuki Doi et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
A carbon-based 3D current collector with surface protection for Li metal anode
Ying Zhang et al.
NANO RESEARCH (2017)
Reviving the lithium metal anode for high-energy batteries
Dingchang Lin et al.
NATURE NANOTECHNOLOGY (2017)
A review of solid electrolytes for safe lithium-sulfur batteries
Ying-Zhi Sun et al.
SCIENCE CHINA-CHEMISTRY (2017)
Low-Cost Metallic Anode Materials for High Performance Rechargeable Batteries
Meng Wang et al.
ADVANCED ENERGY MATERIALS (2017)
A soft non-porous separator and its effectiveness in stabilizing Li metal anodes cycling at 10 mA cm-2 observed in situ in a capillary cell
Kai Liu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
A strategy of selective and dendrite-free lithium deposition for lithium batteries
Jingwei Xiang et al.
NANO ENERGY (2017)
Stable Li Metal Anodes via Regulating Lithium Plating/Stripping in Vertically Aligned Microchannels
Shu-Hua Wang et al.
ADVANCED MATERIALS (2017)
Porous membranes in secondary battery technologies
Wenjing Lu et al.
CHEMICAL SOCIETY REVIEWS (2017)
Nanostructured Carbon Nitride Polymer-Reinforced Electrolyte To Enable Dendrite-Suppressed Lithium Metal Batteries
Jiulin Hu et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Dual Functionalities of Carbon Nanotube Films for Dendrite-Free and High Energy-High Power Lithium-Sulfur Batteries
Keyu Xie et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Elastic Properties of the Solid Electrolyte Li7La3Zr2O12 (LLZO)
Seungho Yu et al.
CHEMISTRY OF MATERIALS (2016)
A Review of Solid Electrolyte Interphases on Lithium Metal Anode
Xin-Bing Cheng et al.
ADVANCED SCIENCE (2016)
Lithium Dendrite Suppression with UV-Curable Polysilsesquioxane Separator Binders
Wonjun Na et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Dendrite-Free Lithium Deposition Induced by Uniformly Distributed Lithium Ions for Efficient Lithium Metal Batteries
Xin-Bing Cheng et al.
ADVANCED MATERIALS (2016)
Highly porous polyacrylonitrile/graphene oxide membrane separator exhibiting excellent anti-self-discharge feature for high-performance lithium-sulfur batteries
Jiadeng Zhu et al.
CARBON (2016)
Designing high-energy lithium-sulfur batteries
Zhi Wei Seh et al.
CHEMICAL SOCIETY REVIEWS (2016)
A rational design of separator with substantially enhanced thermal features for lithium-ion batteries by the polydopamine-ceramic composite modification of polyolefin membranes
Jianhui Dai et al.
ENERGY & ENVIRONMENTAL SCIENCE (2016)
Understanding glass fiber membrane used as a novel separator for lithium-sulfur batteries
Jiadeng Zhu et al.
JOURNAL OF MEMBRANE SCIENCE (2016)
A new finding on the role of LiNO3 in lithium-sulfur battery
Sheng S. Zhang
JOURNAL OF POWER SOURCES (2016)
Mechanically Shaped Two-Dimensional Covalent Organic Frameworks Reveal Crystallographic Alignment and Fast Li-Ion Conductivity
Demetrius A. Vazquez-Molina et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)
Composite lithium metal anode by melt infusion of lithium into a 3D conducting scaffold with lithiophilic coating
Zheng Liang et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2016)
Multifunctional Separator Coatings for High-Performance Lithium-Sulfur Batteries
Mun Sek Kim et al.
ADVANCED MATERIALS INTERFACES (2016)
The pursuit of solid-state electrolytes for lithium batteries: from comprehensive insight to emerging horizons
Renjie Chen et al.
MATERIALS HORIZONS (2016)
Dendrites and Pits: Untangling the Complex Behavior of Lithium Metal Anodes through Operando Video Microscopy
Kevin N. Wood et al.
ACS CENTRAL SCIENCE (2016)
K+ Reduces Lithium Dendrite Growth by Forming a Thin, Less-Resistive Solid Electrolyte Interphase
Sean M. Wood et al.
ACS ENERGY LETTERS (2016)
Cellulose-Based Porous Membrane for Suppressing Li Dendrite Formation in Lithium-Sulfur Battery
Byeong-Chul Yu et al.
ACS ENERGY LETTERS (2016)
Design principles for electrolytes and interfaces for stable lithium-metal batteries
Mukul D. Tikekar et al.
NATURE ENERGY (2016)
Li2S5-based ternary-salt electrolyte for robust lithium metal anode
Chen-Zi Zhao et al.
ENERGY STORAGE MATERIALS (2016)
Effective Suppression of Dendritic Lithium Growth Using an Ultrathin Coating of Nitrogen and Sulfur Codoped Graphene Nanosheets on Polymer Separator for Lithium Metal Batteries
Won-Kyung Shin et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Lithium-Sulfur Batteries: Progress and Prospects
Arumugam Manthiram et al.
ADVANCED MATERIALS (2015)
Structural Properties of Solid Electrolyte Interphase on Lithium Metal
Soon-Ki Jeong et al.
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2015)
Solvent Activity in Electrolyte Solutions Controls Electrochemical Reactions in Li-Ion and Li-Sulfur Batteries
Heejoon Moon et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2015)
All Solid-State Lithium-Sulfur Battery Using a Glass-Type P2S5-Li2S Electrolyte: Benefits on Anode Kinetics
Takanobu Yamada et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)
Review-Superconcentrated Electrolytes for Lithium Batteries
Yuki Yamada et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)
Accommodating lithium into 3D current collectors with a submicron skeleton towards long-life lithium metal anodes
Chun-Peng Yang et al.
NATURE COMMUNICATIONS (2015)
High rate and stable cycling of lithium metal anode
Jiangfeng Qian et al.
NATURE COMMUNICATIONS (2015)
Electrochemically Stable Rechargeable Lithium-Sulfur Batteries with a Microporous Carbon Nanofiber Filter for Polysulfide
Sheng-Heng Chung et al.
ADVANCED ENERGY MATERIALS (2015)
Fabrication of a nano-Li+-channel interlayer for high performance Li-S battery application
Na Yan et al.
RSC ADVANCES (2015)
Demonstration of highly efficient lithium-sulfur batteries
Rui Xu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Sulfur double locked by a macro-structural cathode and a solid polymer electrolyte for lithium-sulfur batteries
Cheng Zhang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Dendrite-free lithium metal anodes: stable solid electrolyte interphases for high-efficiency batteries
Xin-Bing Cheng et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Poly(ethylene oxide)-based electrolytes for lithium-ion batteries
Zhigang Xue et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Dendrite-free Li deposition using trace-amounts of water as an electrolyte additive
Jiangfeng Qian et al.
NANO ENERGY (2015)
Model Membrane-Free Li-S Batteries for Enhanced Performance and Cycle Life
Kenville E. Hendrickson et al.
ADVANCED SCIENCE (2015)
The Lithium/Air Battery: Still an Emerging System or a Practical Reality?
Lorenzo Grande et al.
ADVANCED MATERIALS (2015)
A Fundamental Stability Study for Amorphous LiLaTiO3 Solid Electrolyte
Zhangfeng Zheng et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2015)
Magnetron sputtering deposition of TiO2 particles on polypropylene separators for lithium-ion batteries
Kun Peng et al.
RSC ADVANCES (2015)
Mixed Transition-Metal Oxides: Design, Synthesis, and Energy-Related Applications
Changzhou Yuan et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2014)
A review of recent developments in membrane separators for rechargeable lithium-ion batteries
Hun Lee et al.
ENERGY & ENVIRONMENTAL SCIENCE (2014)
Lithium metal anodes for rechargeable batteries
Wu Xu et al.
ENERGY & ENVIRONMENTAL SCIENCE (2014)
Stabilized Lithium-Metal Surface in a Polysulfide-Rich Environment of Lithium-Sulfur Batteries
Chenxi Zu et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2014)
Enhancement effect of trace H2O on the charge discharge cycling performance of a Li metal anode
Norihiro Togasaki et al.
JOURNAL OF POWER SOURCES (2014)
Metallic anodes for next generation secondary batteries
Hansu Kim et al.
CHEMICAL SOCIETY REVIEWS (2013)
Challenges Facing Lithium Batteries and Electrical Double-Layer Capacitors
Nam-Soon Choi et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2012)
A dual-electrolyte rechargeable Li-air battery with phosphate buffer catholyte
Longjun Li et al.
ELECTROCHEMISTRY COMMUNICATIONS (2012)
Designing nanostructured Si anodes for high energy lithium ion batteries
Hui Wu et al.
NANO TODAY (2012)
Li-O2 and Li-S batteries with high energy storage
Peter G. Bruce et al.
NATURE MATERIALS (2012)
Electrochemical properties of all-solid-state batteries with ZrO2-coated LiNi1/3Mn1/3Co1/3O2 as cathode materials
Nobuya Machida et al.
SOLID STATE IONICS (2012)
Prospective materials and applications for Li secondary batteries
Goojin Jeong et al.
ENERGY & ENVIRONMENTAL SCIENCE (2011)
A Solid Lithium Electrolyte via Addition of Lithium Isopropoxide to a Metal-Organic Framework with Open Metal Sites
Brian M. Wiers et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2011)
Graphene-Wrapped Sulfur Particles as a Rechargeable Lithium-Sulfur Battery Cathode Material with High Capacity and Cycling Stability
Hailiang Wang et al.
NANO LETTERS (2011)
Electrical Energy Storage for the Grid: A Battery of Choices
Bruce Dunn et al.
SCIENCE (2011)
Challenges for Rechargeable Li Batteries
John B. Goodenough et al.
CHEMISTRY OF MATERIALS (2010)
Platinum-Gold Nanoparticles: A Highly Active Bifunctional Electrocatalyst for Rechargeable Lithium-Air Batteries
Yi-Chun Lu et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2010)
Development of electrospun PVdF-PAN membrane-based polymer electrolytes for lithium batteries
Anantha Iyenger Gopalan et al.
JOURNAL OF MEMBRANE SCIENCE (2008)
Fast lithium ion conduction in garnet-type Li7La3Zr2O12
Ramaswamy Murugan et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2007)
分享论文
