相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Circular economy strategies for electric vehicle batteries reduce reliance on raw materials
Joris Baars et al.
NATURE SUSTAINABILITY (2021)
Critical assessment of renewable energy waste generation in OECD countries: Decommissioned PV panels
Sajjad Mahmoudi et al.
RESOURCES CONSERVATION AND RECYCLING (2021)
Perspectives on Cobalt Supply through 2030 in the Face of Changing Demand
Xinkai Fu et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2020)
Guiding the environmental design of a novel solar absorber through life cycle assessment by identifying anticipated hot spots
Joseph Andler et al.
JOURNAL OF CLEANER PRODUCTION (2020)
Comprehensive elemental analysis of consumer electronic devices: Rare earth, precious, and critical elements
Dylan T. Buechler et al.
WASTE MANAGEMENT (2020)
Identifying supply risks by mapping the cobalt supply chain
Susan van den Brink et al.
RESOURCES CONSERVATION AND RECYCLING (2020)
Review of critical metal dynamics to 2050 for 48 elements
Takuma Watari et al.
RESOURCES CONSERVATION AND RECYCLING (2020)
Chemical recycling to monomer for an ideal, circular polymer economy
Geoffrey W. Coates et al.
NATURE REVIEWS MATERIALS (2020)
Technoeconomic model of second-life batteries for utility-scale solar considering calendar and cycle aging
Ian Mathews et al.
APPLIED ENERGY (2020)
Life cycle assessment of emerging technologies on value recovery from hard disk drives
Hongyue Jin et al.
RESOURCES CONSERVATION AND RECYCLING (2020)
Business incubators as effective tools for driving circular economy
Sherwyn Millette et al.
JOURNAL OF CLEANER PRODUCTION (2020)
A Research Roadmap for Sustainable Design Methods and Tools
Jeremy Faludi et al.
SUSTAINABILITY (2020)
Transforming The Medical Device Industry: Road Map To A Circular Economy
Andrea J. MacNeill et al.
HEALTH AFFAIRS (2020)
The use of decision support tools to accelerate the development of circular economic business models for hard disk drives and rare-earth magnets
Kali Frost et al.
MRS ENERGY & SUSTAINABILITY (2020)
Adapting Stand-Alone Renewable Energy Technologies for the Circular Economy through Eco-Design and Recycling
John Gallagher et al.
JOURNAL OF INDUSTRIAL ECOLOGY (2019)
How to define the quality of materials in a circular economy?
Z. J. N. Steinmann et al.
RESOURCES CONSERVATION AND RECYCLING (2019)
Circular economy indicators: What do they measure?
Gustavo Moraga et al.
RESOURCES CONSERVATION AND RECYCLING (2019)
Estimating increasing diversity and dissipative loss of critical metals in the aluminum automotive sector
Ayomipo Arowosola et al.
RESOURCES CONSERVATION AND RECYCLING (2019)
The vulnerability of electric vehicle deployment to critical mineral supply
Benjamin Ballinger et al.
APPLIED ENERGY (2019)
The effect of critical material prices on the competitiveness of clean energy technologies
Alexandra Leader et al.
MATERIALS FOR RENEWABLE AND SUSTAINABLE ENERGY (2019)
A framework for firm-level critical material supply management and mitigation
Gillian Griffin et al.
RESOURCES POLICY (2019)
Environmental Assessment of Emerging Technologies: Recommendations for Prospective LCA
Rickard Arvidsson et al.
JOURNAL OF INDUSTRIAL ECOLOGY (2018)
Circular Economy: The Concept and its Limitations
Jouni Korhonen et al.
ECOLOGICAL ECONOMICS (2018)
Portfolio Optimization of Nanomaterial Use in Clean Energy Technologies
Elizabeth A. Moore et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2018)
Theoretical contribution of industrial ecology to circular economy
Yovana M. B. Saavedra et al.
JOURNAL OF CLEANER PRODUCTION (2018)
Resilience in the tantalum supply chain
Nabeel A. Mancheri et al.
RESOURCES CONSERVATION AND RECYCLING (2018)
Circular economy strategies for mitigating critical material supply issues
Gabrielle Gaustad et al.
RESOURCES CONSERVATION AND RECYCLING (2018)
Ease of disassembly of products to support circular economy strategies
Paul Vanegas et al.
RESOURCES CONSERVATION AND RECYCLING (2018)
Ecological foraging models as inspiration for optimized recycling systems in the circular economy
Erinn G. Ryen et al.
RESOURCES CONSERVATION AND RECYCLING (2018)
Experimenting with a circular business model: Lessons from eight cases
N. M. P. Bocken et al.
ENVIRONMENTAL INNOVATION AND SOCIETAL TRANSITIONS (2018)
Critical minerals: A review of elemental trends in comprehensive criticality studies
Sarah M. Hayes et al.
RESOURCES POLICY (2018)
Sustainability of artisanal mining of cobalt in DR Congo
Celestin Banza Lubaba Nkulu et al.
NATURE SUSTAINABILITY (2018)
The Development and Future of Lithium Ion Batteries
George E. Blomgren
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)
Novel Indicators for the Quantification of Resilience in Critical Material Supply Chains, with a 2010 Rare Earth Crisis Case Study
Benjamin Sprecher et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2017)
Eco-Efficiency Analysis of a Lithium-Ion Battery Waste Hierarchy Inspired by Circular Economy
Kirti Richa et al.
JOURNAL OF INDUSTRIAL ECOLOGY (2017)
Circular Economy Rebound
Trevor Zink et al.
JOURNAL OF INDUSTRIAL ECOLOGY (2017)
Product Design in a Circular Economy Development of a Typology of Key Concepts and Terms
Marcel C. den Hollander et al.
JOURNAL OF INDUSTRIAL ECOLOGY (2017)
Conceptualizing the circular economy: An analysis of 114 definitions
Julian Kirchherr et al.
RESOURCES CONSERVATION AND RECYCLING (2017)
How black swan disruptions impact minor metals
Benjamin Sprecher et al.
RESOURCES POLICY (2017)
Lithium-Ion Battery Supply Chain Considerations: Analysis of Potential Bottlenecks in Critical Metals
Elsa A. Olivetti et al.
JOULE (2017)
Remanufacturing for the Circular Economy: An Examination of Consumer Switching Behavior
Benjamin T. Hazen et al.
BUSINESS STRATEGY AND THE ENVIRONMENT (2017)
Quantifying and mapping embodied environmental requirements of urban building stocks
Andre Stephan et al.
BUILDING AND ENVIRONMENT (2017)
Conserving functionality of relatively rare metals associated with steel life cycles: a review
L. Reijnders
JOURNAL OF CLEANER PRODUCTION (2016)
System Dynamics Modeling of Indium Material Flows under Wide Deployment of Clean Energy Technologies
Chul Hun Choi et al.
RESOURCES CONSERVATION AND RECYCLING (2016)
Life Cycle Assessment (LCA) of perovskite PV cells projected from lab to fab
Ilke Celik et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2016)
Antimony Recovery from End-of-Life Products and Industrial Process Residues: A Critical Review
David Dupont et al.
JOURNAL OF SUSTAINABLE METALLURGY (2016)
Six Years of Criticality Assessments: What Have We Learned So Far?
T. E. Graedel et al.
JOURNAL OF INDUSTRIAL ECOLOGY (2016)
Limitations to elemental substitution as exemplified by the platinum-group metals
N. T. Nassar
GREEN CHEMISTRY (2015)
Sustainable Product-Service System Design applied to Distributed Renewable Energy fostering the goal of sustainable energy for all
Carlo Vezzoli et al.
JOURNAL OF CLEANER PRODUCTION (2015)
Critical materials from a product design perspective
David Peck et al.
MATERIALS & DESIGN (2015)
Criticality of metals and metalloids
T. E. Graedel et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2015)
On the materials basis of modern society
T. E. Graedel et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2015)
Remanufactured Products in Closed-Loop Supply Chains for Consumer Goods
James D. Abbey et al.
PRODUCTION AND OPERATIONS MANAGEMENT (2015)
Criticality of the Geological Zinc, Tin, and Lead Family
E. M. Harper et al.
JOURNAL OF INDUSTRIAL ECOLOGY (2015)
Global Substance Flow Analysis of Gallium, Germanium, and Indium: Quantification of Extraction, Uses, and Dissipative Losses within their Anthropogenic Cycles
Christina Licht et al.
JOURNAL OF INDUSTRIAL ECOLOGY (2015)
Identifying critical materials for photovoltaics in the US: A multi-metric approach
Michele Goe et al.
APPLIED ENERGY (2014)
Employing Considerations of Criticality in Product Design
T. E. Graedel et al.
JOM (2014)
Products that go round: exploring product life extension through design
Conny Bakker et al.
JOURNAL OF CLEANER PRODUCTION (2014)
Community Ecology Perspectives on the Structural and Functional Evolution of Consumer Electronics
Erinn G. Ryen et al.
JOURNAL OF INDUSTRIAL ECOLOGY (2014)
Unintentional Flow of Alloying Elements in Steel during Recycling of End-of-Life Vehicles
Hajime Ohno et al.
JOURNAL OF INDUSTRIAL ECOLOGY (2014)
A future perspective on lithium-ion battery waste flows from electric vehicles
Kirti Richa et al.
RESOURCES CONSERVATION AND RECYCLING (2014)
Economies of scale for future lithium-ion battery recycling infrastructure
Xue Wang et al.
RESOURCES CONSERVATION AND RECYCLING (2014)
GIS and Urban Mining
Xuan Zhu
RESOURCES-BASEL (2014)
Recycling as a Strategy against Rare Earth Element Criticality: A Systemic Evaluation of the Potential Yield of NdFeB Magnet Recycling
Jelle H. Rademaker et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2013)
Material efficiency: rare and critical metals
Robert U. Ayres et al.
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2013)
Evaluating Rare Earth Element Availability: A Case with Revolutionary Demand from Clean Technologies
Elisa Alonso et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2012)
Challenges in Metal Recycling
Barbara K. Reck et al.
SCIENCE (2012)
What Do We Know About Metal Recycling Rates?
T. E. Graedel et al.
JOURNAL OF INDUSTRIAL ECOLOGY (2011)
Material efficiency: A white paper
Julian M. Allwood et al.
RESOURCES CONSERVATION AND RECYCLING (2011)
Recycling of gold from electronics: Cost-effective use through 'Design for Recycling'
Christian Hagelueken et al.
GOLD BULLETIN (2010)
Urban stock over time: spatial material stock analysis using 4d-GIS
Hiroki Tanikawa et al.
BUILDING RESEARCH AND INFORMATION (2009)
Digital Media and Dematerialization
Nick Hogg et al.
JOURNAL OF INDUSTRIAL ECOLOGY (2009)
A safe operating space for humanity
Johan Rockstrom et al.
NATURE (2009)
Advanced high strength steels for automotive industry: a review
R. Kuziak et al.
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2008)
Material considerations in product design: A survey on crucial material aspects used by product designers
Elvin Karana et al.
MATERIALS & DESIGN (2008)
Material availability and the supply chain: Risks, effects, and responses
Elisa Alonso et al.
ENVIRONMENTAL SCIENCE & TECHNOLOGY (2007)
Implementing technology-forcing policies: The 1970 Clean Air Act Amendments and the introduction of advanced automotive emissions controls in the United States
D Gerard et al.
TECHNOLOGICAL FORECASTING AND SOCIAL CHANGE (2005)
TEM investigations of fine niobium precipitates in HSLA steel
M Béres et al.
STEEL RESEARCH INTERNATIONAL (2004)
De-materialising and re-materialising: digital technologies and the environment
F Berkhout et al.
FUTURES (2004)
分享论文
