相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Application of an average strain energy density criterion to obtain the mixed mode fracture load of granite rock tested with the cracked asymmetric four-point bend specimens
S. M. J. Razavi et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2018)
The role of first non-singular stress terms in mixed mode brittle fracture of V-notched components: an experimental study
M. Dehghany et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2017)
Fracture toughness prediction using Weibull statistical method for asphalt mixtures containing different air void contents
M. R. M. Aliha et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2017)
Microseismic Monitoring of the Left Bank Slope at the Baihetan Hydropower Station, China
Feng Dai et al.
ROCK MECHANICS AND ROCK ENGINEERING (2017)
Fracture prediction of rocks under mode I and mode II loading using the generalized maximum tangential strain criterion
Ming-Dong Wei et al.
ENGINEERING FRACTURE MECHANICS (2017)
State of the art of corner point singularities under in-plane and out-of-plane loading
Les P. Pook et al.
ENGINEERING FRACTURE MECHANICS (2017)
Fatigue failure transition analysis in load-carrying cruciform welded joints based on strain energy density approach
W. Song et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2017)
Mixed Mode I/II Fracture Investigation of Perspex Based on the Averaged Strain Energy Density Criterion
M. R. M. Aliha et al.
PHYSICAL MESOMECHANICS (2017)
Rock Fracture Toughness Study Under Mixed Mode I/III Loading
M. R. M. Aliha et al.
ROCK MECHANICS AND ROCK ENGINEERING (2017)
Experimental Investigation of the Influence of Joint Geometric Configurations on the Mechanical Properties of Intermittent Jointed Rock Models Under Cyclic Uniaxial Compression
Yi Liu et al.
ROCK MECHANICS AND ROCK ENGINEERING (2017)
Investigation of fracture toughness for a polycrystalline graphite under combined tensile-tear deformation
A. Bahmani et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2017)
On the applicability of ASED criterion for predicting mixed mode I plus II fracture toughness results of a rock material
M. R. M. Aliha et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2017)
Mixed Mode I/II Fracture Investigation of Perspex Based on the Averaged Strain Energy Density Criterion
M. R. M. Aliha et al.
PHYSICAL MESOMECHANICS (2017)
DEM investigation on fracture mechanism of the CCNSCB specimen under intermediate dynamic loading
P. Feng et al.
ARABIAN JOURNAL OF GEOSCIENCES (2017)
Fracture toughness determination of modified HMA mixtures with two novel disc shape configurations
M. R. M. Aliha et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
The Influence of Specimen Type on Tensile Fracture Toughness of Rock Materials
Mohammad Reza Mohammad Aliha et al.
PURE AND APPLIED GEOPHYSICS (2017)
Generalized approach to estimation of strains and stresses at blunt V-notches under non-localized creep
P. Gallo et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2016)
Stress Intensity Factors of Semi-Circular Bend Specimens with Straight-Through and Chevron Notches
M. R. Ayatollahi et al.
ROCK MECHANICS AND ROCK ENGINEERING (2016)
Numerical Observation of Three-Dimensional Wing Cracking of Cracked Chevron Notched Brazilian Disc Rock Specimen Subjected to Mixed Mode Loading
N. W. Xu et al.
ROCK MECHANICS AND ROCK ENGINEERING (2016)
Experimental and Numerical Study on the Cracked Chevron Notched Semi-Circular Bend Method for Characterizing the Mode I Fracture Toughness of Rocks
Ming-Dong Wei et al.
ROCK MECHANICS AND ROCK ENGINEERING (2016)
Numerical Investigation of Dynamic Rock Fracture Toughness Determination Using a Semi-Circular Bend Specimen in Split Hopkinson Pressure Bar Testing
Y. Xu et al.
ROCK MECHANICS AND ROCK ENGINEERING (2016)
Determination of double-K fracture parameters using semi-circular bend test specimens
Shilang Xu et al.
ENGINEERING FRACTURE MECHANICS (2016)
Experimental and numerical study on the fracture process zone and fracture toughness determination for ISRM-suggested semi-circular bend rock specimen
M. D. Wei et al.
ENGINEERING FRACTURE MECHANICS (2016)
Stress intensity factors and fracture process zones of ISRM-suggested chevron notched specimens for mode I fracture toughness testing of rocks
Ming-Dong Wei et al.
ENGINEERING FRACTURE MECHANICS (2016)
Rapid finite element evaluation of the averaged strain energy density of mixed-mode (I plus II) crack tip fields including the T-stress contribution
A. Campagnolo et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2016)
Coupled fracture modes of discs and plates under anti-plane loading and a disc under in-plane shear loading
L. P. Pook et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2016)
A brief review of recent three-dimensional studies of brittle fracture
Z. He et al.
PHYSICAL MESOMECHANICS (2016)
Fracture Assessment of Polymethyl Methacrylate Using Sharp Notched Disc Bend Specimens under Mixed Mode I plus III Loading
M. R. M. Aliha et al.
PHYSICAL MESOMECHANICS (2016)
Fracture Toughness Determination of Cracked Chevron Notched Brazilian Disc Rock Specimen via Griffith Energy Criterion Incorporating Realistic Fracture Profiles
Yuan Xu et al.
ROCK MECHANICS AND ROCK ENGINEERING (2016)
Local strain energy density to predict size-dependent brittle fracture of cracked specimens under mixed mode loading
F. Berto et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2016)
A brief review of recent three-dimensional studies of brittle fracture
Z. He et al.
PHYSICAL MESOMECHANICS (2016)
Fracture Assessment of Polymethyl Methacrylate Using Sharp Notched Disc Bend Specimens under Mixed Mode I plus III Loading
M. R. M. Aliha et al.
PHYSICAL MESOMECHANICS (2016)
Numerical investigation of the progressive fracture mechanisms of four ISRM-suggested specimens for determining the mode I fracture toughness of rocks
F. Dai et al.
COMPUTERS AND GEOTECHNICS (2015)
Three-dimensional numerical evaluation of the progressive fracture mechanism of cracked chevron notched semi-circular bend rock specimens
M. D. Wei et al.
ENGINEERING FRACTURE MECHANICS (2015)
Investigation on the mechanical properties and fracture toughness of graphite
A. R. Shahani et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2015)
Effect of vertex singularities on stress intensities near plate free surfaces
Z. He et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2015)
Brittle Fracture of Rounded V-Notches in Isostatic Graphite under Static Multiaxial Loading
F. Berto et al.
PHYSICAL MESOMECHANICS (2015)
Averaged strain energy density evaluated rapidly from the singular peak stresses by FEM: cracked components under mixed-mode (I plus II) loading
G. Meneghetti et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2015)
Brittle Fracture of Rounded V-Notches in Isostatic Graphite under Static Multiaxial Loading
F. Berto et al.
PHYSICAL MESOMECHANICS (2015)
Determination of mode III fracture toughness for different materials using a new designed test configuration
M. R. M. Aliha et al.
MATERIALS & DESIGN (2015)
Numerical Assessment of the Progressive Rock Fracture Mechanism of Cracked Chevron Notched Brazilian Disc Specimens
F. Dai et al.
ROCK MECHANICS AND ROCK ENGINEERING (2015)
Experimental analysis of mixed mode crack propagation in brittle rocks: The effect of non-singular terms
J. Akbardoost et al.
ENGINEERING FRACTURE MECHANICS (2014)
ISRM-Suggested Method for Determining the Mode I Static Fracture Toughness Using Semi-Circular Bend Specimen
M. D. Kuruppu et al.
ROCK MECHANICS AND ROCK ENGINEERING (2014)
Size and Geometry Effects on Rock Fracture Toughness: Mode I Fracture
M. R. Ayatollahi et al.
ROCK MECHANICS AND ROCK ENGINEERING (2014)
A comparison among some recent energy- and stress-based criteria for the fracture assessment of sharp V-notched components under Mode I loading
P. Lazzarin et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2014)
Rock fracture toughness study using cracked chevron notched Brazilian disc specimen under pure modes I and II loading - A statistical approach
M. R. M. Aliha et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2014)
Two-parameter fracture analysis of SCB rock specimen under mixed mode loading
M. R. M. Aliha et al.
ENGINEERING FRACTURE MECHANICS (2013)
A 50-year retrospective review of three-dimensional effects at cracks and sharp notches
L. P. Pook
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2013)
Application of Cracked Triangular Specimen Subjected to Three-Point Bending for Investigating Fracture Behavior of Rock Materials
M. R. M. Aliha et al.
ROCK MECHANICS AND ROCK ENGINEERING (2013)
Recalibration and Clarification of the Formula Applied to the ISRM-Suggested CCNBD Specimens for Testing Rock Fracture Toughness
Q. Z. Wang et al.
ROCK MECHANICS AND ROCK ENGINEERING (2013)
Effects of geometric factors on mode I fracture toughness for modified ring tests
Levent Tutluoglu et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2012)
Geometry effects and statistical analysis of mode I fracture in guiting limestone
M. R. M. Aliha et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2012)
Typical Upper Bound-Lower Bound Mixed Mode Fracture Resistance Envelopes for Rock Material
M. R. M. Aliha et al.
ROCK MECHANICS AND ROCK ENGINEERING (2012)
Mode I fracture initiation in limestone by strain energy density criterion
M. R. Ayatollahi et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2012)
Investigation of proper specimen geometry for mode I fracture toughness testing with flattened Brazilian disc method
Cigdem Keles et al.
INTERNATIONAL JOURNAL OF FRACTURE (2011)
Mode I fracture toughness determination with straight notched disk bending method
Levent Tutluoglu et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2011)
Geometry and size effects on fracture trajectory in a limestone rock under mixed mode loading
M. R. M. Aliha et al.
ENGINEERING FRACTURE MECHANICS (2010)
A comparison of two ISRM suggested chevron notched specimens for testing mode-I rock fracture toughness
Zhen-dong Cui et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2010)
Mixed mode fracture in soda lime glass analyzed by using the generalized MTS criterion
M. R. Ayatollahi et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2009)
On the use of Brazilian disc specimen for calculating mixed mode I-II fracture toughness of rock materials
M. R. Ayatollahi et al.
ENGINEERING FRACTURE MECHANICS (2008)
Brittle Fracture Analysis Using a Ring-Shape Specimen Containing Two Angled Cracks
M. R. M. Aliha et al.
INTERNATIONAL JOURNAL OF FRACTURE (2008)
Size effect and quasi-brittle fracture: the role of FPZ
Xiaozhi Hu et al.
INTERNATIONAL JOURNAL OF FRACTURE (2008)
Experimental calibration of ISRM suggested fracture toughness measurement techniques in selected brittle rocks
M. J. Iqbal et al.
ROCK MECHANICS AND ROCK ENGINEERING (2007)
分享论文
