相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Digital Twin-enabled Collaborative Data Management for Metal Additive Manufacturing Systems
Chao Liu et al.
JOURNAL OF MANUFACTURING SYSTEMS (2022)
Metallurgy, mechanistic models and machine learning in metal printing
T. DebRoy et al.
NATURE REVIEWS MATERIALS (2021)
Application and performance of machine learning techniques in manufacturing sector from the past two decades: A review
Uma Maheshwera Reddy Paturi et al.
MATERIALS TODAY-PROCEEDINGS (2021)
Microstructural control in metal laser powder bed fusion additive manufacturing using laser beam shaping strategy
Rongpei Shi et al.
ACTA MATERIALIA (2020)
An ultra-high strength martensitic steel fabricated using selective laser melting additive manufacturing: Densification, microstructure, and mechanical properties
Raiyan Seede et al.
ACTA MATERIALIA (2020)
In-situ full-field mapping of melt flow dynamics in laser metal additive manufacturing
Qilin Guo et al.
ADDITIVE MANUFACTURING (2020)
Neural networks for trajectory evaluation in direct laser writing
Anton Bauhofer et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Machine Learning in Additive Manufacturing: A Review
Lingbin Meng et al.
JOM (2020)
Controlling interdependent meso-nanosecond dynamics and defect generation inmetal 3D printing
Saad A. Khairallah et al.
SCIENCE (2020)
Molecular dynamics simulation of coalescence kinetics and neck growth in laser additive manufacturing of aluminum alloy nanoparticles
Jyotirmoy Nandy et al.
JOURNAL OF MOLECULAR MODELING (2020)
Characterising the Digital Twin: A systematic literature review
David Jones et al.
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2020)
Energy-Coupling Mechanisms Revealed through Simultaneous Keyhole Depth and Absorptance Measurements during Laser-Metal Processing
Troy R. Allen et al.
PHYSICAL REVIEW APPLIED (2020)
Modeling and Simulation of Microstructure Evolution for Additive Manufacturing of Metals: A Critical Review
Carolin Koerner et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2020)
Controlling grain nucleation and morphology by laser beam shaping in metal additive manufacturing
Tien T. Roehling et al.
MATERIALS & DESIGN (2020)
Invited review: Machine learning for materials developments in metals additive manufacturing
N. S. Johnson et al.
ADDITIVE MANUFACTURING (2020)
Machine learning in additive manufacturing: State-of-the-art and perspectives
C. Wang et al.
ADDITIVE MANUFACTURING (2020)
Laser-metal interaction dynamics during additive manufacturing resolved by detection of thermally-induced electron emission
Philip J. DePond et al.
COMMUNICATIONS MATERIALS (2020)
Critical nuclei at hetero-phase interfaces
Rongpei Shi et al.
ACTA MATERIALIA (2020)
Interface kinetics of rapid solidification of binary alloys by atomistic simulations: Application to Ti-Ni alloys
Sepideh Kavousi et al.
COMPUTATIONAL MATERIALS SCIENCE (2020)
Digital Twin: Values, Challenges and Enablers From a Modeling Perspective
Adil Rasheed et al.
IEEE ACCESS (2020)
Corrosion properties of 304L stainless steel made by directed energy deposition additive manufacturing
Michael A. Melia et al.
CORROSION SCIENCE (2019)
Structural representation of additively manufactured 316L austenitic stainless steel
C. A. Bronkhorst et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
Energy Coupling Mechanisms and Scaling Behavior Associated with Laser Powder Bed Fusion Additive Manufacturing
Jianchao Ye et al.
ADVANCED ENGINEERING MATERIALS (2019)
Phase-field modeling of crystal nucleation in undercooled liquids - A review
Laszlo Granasy et al.
PROGRESS IN MATERIALS SCIENCE (2019)
Dynamics of pore formation during laser powder bed fusion additive manufacturing
Aiden A. Martin et al.
NATURE COMMUNICATIONS (2019)
Integrated Simulation Framework for Additively Manufactured Ti-6Al-4V: Melt Pool Dynamics, Microstructure, Solid-State Phase Transformation, and Microelastic Response
Rongpei Shi et al.
JOM (2019)
Scientific, technological and economic issues in metal printing and their solutions
T. DebRoy et al.
NATURE MATERIALS (2019)
Bulk-Explosion-Induced Metal Spattering During Laser Processing
Cang Zhao et al.
PHYSICAL REVIEW X (2019)
A phase-field model for hydride formation in polycrystalline metals: Application to δ-hydride in zirconium alloys
Tae Wook Heo et al.
ACTA MATERIALIA (2019)
Digital Twins: Bridging Physical Space and Cyberspace
Roberto Saracco
COMPUTER (2019)
Review of digital twin applications in manufacturing
Chiara Cimino et al.
COMPUTERS IN INDUSTRY (2019)
A multi-scale, multi-physics modeling framework to predict spatial variation of properties in additive-manufactured metals
Carl Herriott et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2019)
Fast solution strategy for transient heat conduction for arbitrary scan paths in additive manufacturing
Alexander J. Wolfer et al.
ADDITIVE MANUFACTURING (2019)
A digital twin for rapid qualification of 3D printed metallic components
T. Mukherjee et al.
APPLIED MATERIALS TODAY (2019)
Ultrafast dynamics of laser-metal interactions in additive manufacturing alloys captured by in situ X-ray imaging
Aiden A. Martin et al.
MATERIALS TODAY ADVANCES (2019)
Corrosion of metallic materials fabricated by selective laser melting
Decheng Kong et al.
NPJ MATERIALS DEGRADATION (2019)
Gaussian process-based surrogate modeling framework for process planning in laser powder-bed fusion additive manufacturing of 316L stainless steel
Gustavo Tapia et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)
Matching time and spatial scales of rapid solidification: dynamic TEM experiments coupled to CALPHAD-informed phase-field simulations
Aurelien Perron et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2018)
Additively manufactured hierarchical stainless steels with high strength and ductility
Y. Morris Wang et al.
NATURE MATERIALS (2018)
Data-driven multi-scale multi-physics models to derive process-structure-property relationships for additive manufacturing
Wentao Yan et al.
COMPUTATIONAL MECHANICS (2018)
Rapid Solidification in Bulk Ti-Nb Alloys by Single-Track Laser Melting
John D. Roehling et al.
JOM (2018)
Investigation on evolution mechanisms of site-specific grain structures during metal additive manufacturing
P. W. Liu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Understanding homogeneous nucleation in solidification of aluminum by molecular dynamics simulations
Avik Mahata et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2018)
Additive manufacturing of metallic components - Process, structure and properties
T. DebRoy et al.
PROGRESS IN MATERIALS SCIENCE (2018)
An instrument for in situ time-resolved X-ray imaging and diffraction of laser powder bed fusion additive manufacturing processes
Nicholas P. Calta et al.
REVIEW OF SCIENTIFIC INSTRUMENTS (2018)
Form of critical nuclei at homo-phase boundaries
Rongpei Shi et al.
SCRIPTA MATERIALIA (2018)
In situ X-ray imaging of defect and molten pool dynamics in laser additive manufacturing
Chu Lun Alex Leung et al.
NATURE COMMUNICATIONS (2018)
Additive manufacturing - a general corrosion perspective
Cem Ornek
CORROSION ENGINEERING SCIENCE AND TECHNOLOGY (2018)
Machine-Learning-Based Monitoring of Laser Powder Bed Fusion
Bodi Yuan et al.
ADVANCED MATERIALS TECHNOLOGIES (2018)
Corrosion of Additively Manufactured Alloys: A Review
G. Sander et al.
CORROSION (2018)
Time-Resolved Absorptance and Melt Pool Dynamics during Intense Laser Irradiation of a Metal
Brian J. Simonds et al.
PHYSICAL REVIEW APPLIED (2018)
Computer Vision and Machine Learning for Autonomous Characterization of AM Powder Feedstocks
Brian L. Decost et al.
JOM (2017)
Simulation Study of Heterogeneous Nucleation at Grain Boundaries During the Austenite-Ferrite Phase Transformation: Comparing the Classical Model with the Multi-Phase Field Nudged Elastic Band Method
Huajing Song et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
A Molecular Dynamics Study of Partitionless Solidification and Melting of Al-Cu Alloys
Sankar Kumar Deb Nath et al.
ISIJ INTERNATIONAL (2017)
Characterizing heterogeneous intragranular deformations in polycrystalline solids using diffraction-based and mechanics-based metrics
Robert Carson et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2017)
Crystal plasticity modeling of β phase deformation in Ti-6Al-4V
John A. Moore et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2017)
Building digital twins of 3D printing machines
T. DebRoy et al.
SCRIPTA MATERIALIA (2017)
Molecular Dynamics Study of Thermodynamic Properties of Nanoclusters for Additive Manufacturing
Truong Quoc Vo et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2017)
Real-time monitoring of laser powder bed fusion process using high-speed X-ray imaging and diffraction
Cang Zhao et al.
SCIENTIFIC REPORTS (2017)
Metal vapor micro-jet controls material redistribution in laser powder bed fusion additive manufacturing
Sonny Ly et al.
SCIENTIFIC REPORTS (2017)
Building blocks for a digital twin of additive manufacturing
G. L. Knapp et al.
ACTA MATERIALIA (2017)
Modulating laser intensity profile ellipticity for microstructural control during metal additive manufacturing
Tien T. Roehling et al.
ACTA MATERIALIA (2017)
Modeling slip system strength evolution in Ti-7A1 informed by in-situ grain stress measurements
Darren C. Pagan et al.
ACTA MATERIALIA (2017)
Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones
Saad A. Khairallah et al.
ACTA MATERIALIA (2016)
Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
Sarah K. Everton et al.
MATERIALS & DESIGN (2016)
Microstructure and transformation texture evolution during α precipitation in polycrystalline α/β titanium alloys - A simulation study
R. Shi et al.
ACTA MATERIALIA (2015)
Graded microstructure and mechanical properties of additive manufactured Ti-6Al-4V via electron beam melting
Xipeng Tan et al.
ACTA MATERIALIA (2015)
A thermodynamic re-assessment of Al-V toward an assessment of the ternary Al-Ti-V system
Bonnie Lindahl et al.
CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY (2015)
Multi-scale modeling of solidification and microstructure development in laser keyhole welding process for austenitic stainless steel
Wenda Tan et al.
COMPUTATIONAL MATERIALS SCIENCE (2015)
Site specific control of crystallographic grain orientation through electron beam additive manufacturing
R. R. Dehoff et al.
MATERIALS SCIENCE AND TECHNOLOGY (2015)
Differences in microstructure and properties between selective laser melting and traditional manufacturing for fabrication of metal parts: A review
Bo Song et al.
FRONTIERS OF MECHANICAL ENGINEERING (2015)
Phase-field modeling of coring during solidification of Au-Ni alloy using quaternions and CALPHAD input
J. -L. Fattebert et al.
ACTA MATERIALIA (2014)
Phase-field modeling of displacive phase transformations in elastically anisotropic and inhomogeneous polycrystals
Tae Wook Heo et al.
ACTA MATERIALIA (2014)
Variant selection of grain boundary α by special prior β grain boundaries in titanium alloys
R. Shi et al.
ACTA MATERIALIA (2014)
Implementation of a thermomechanical model for the simulation of selective laser melting
N. E. Hodge et al.
COMPUTATIONAL MECHANICS (2014)
Phase-Field Modeling of Nucleation in Solid-State Phase Transformations
Tae Wook Heo et al.
JOM (2014)
Mesoscopic simulation model of selective laser melting of stainless steel powder
Saad A. Khairallah et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)
DREAM. 3D: A Digital Representation Environment for the Analysis of Microstructure in 3D
Michael A. Groeber et al.
INTEGRATING MATERIALS AND MANUFACTURING INNOVATION (2014)
A Spectral Iterative Method for the Computation of Effective Properties of Elastically Inhomogeneous Polycrystals
Saswata Bhattacharyya et al.
COMMUNICATIONS IN COMPUTATIONAL PHYSICS (2012)
Effective elastic properties of polycrystals based on phase-field description
G. Sheng et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Assessment of diffusion mobility for the bcc phase of the Ti-Al-Cr system
Weibang Li et al.
CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY (2011)
A phase-field model of stress effect on grain boundary migration
Saswata Bhattacharyya et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2011)
Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications
F. Roters et al.
ACTA MATERIALIA (2010)
A numerical algorithm for the solution of a phase-field model of polycrystalline materials
M. R. Dorr et al.
JOURNAL OF COMPUTATIONAL PHYSICS (2010)
Assessment of Atomic Mobilities for bcc Phase of Ti-Al-V System
Lei Huang et al.
JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION (2010)
Thermodynamic and kinetic modeling of bcc phase in the Ti-Al-V ternary system
H. Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Incorporating diffuse-interface nuclei in phase-field simulations
Tae Wook Heo et al.
SCRIPTA MATERIALIA (2010)
Assessment of the diffusional mobilities in bcc Ti-V alloys
Yajun Liu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Defect evolution and pore collapse in crystalline energetic materials
Nathan R. Barton et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2009)
The Al-B-Nb-Ti system III. Thermodynamic re-evaluation of the constituent binary system Al-Ti
V. T. Witusiewicz et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2008)
A predictive equation for solute diffusivity in liquid metals
Yong Liu et al.
SCRIPTA MATERIALIA (2006)
Kinetic coefficient of Ni solid-liquid interfaces from molecular-dynamics simulations
DY Sun et al.
PHYSICAL REVIEW B (2004)
Phase field modeling of simultaneous nucleation and growth by explicitly incorporating nucleation events
JP Simmons et al.
SCRIPTA MATERIALIA (2000)