4.6 Article

Microwave-assisted foaming and sintering to prepare lightweight high-strength polystyrene/carbon nanotube composite foams with an ultralow percolation threshold

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Physical

From intrinsic dielectric loss to geometry patterns: Dual-principles strategy for ultrabroad band microwave absorption

Bin Quan et al.

Summary: This study proposes a dual-principle strategy to investigate the impact of utilizing conductive absorption fillers and artificial structures on absorption performance. By combining microscopic and macroscopic design, the effective operating bandwidth of microwave has been fundamentally extended.

NANO RESEARCH (2021)

Article Engineering, Manufacturing

Lightweight and flexible poly(ether-block-amide)/multiwalled carbon nanotube composites with porous structure and segregated conductive networks for electromagnetic shielding applications

Chengbiao Ge et al.

Summary: An innovative method was used to prepare lightweight, deformable, and stable conductive composites with segregated structure and microcellular morphology inside. The composites achieved satisfactory conductivity and electromagnetic interference shielding effectiveness with low multiwalled carbon nanotube content. The microcellular poly(ether-block-amide) beads promoted lightweight and outstanding deformability, while protecting the continuity of conductive network during deformation process.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)

Article Engineering, Multidisciplinary

Constructing 3D carbon-metal hybrid conductive network in polymer for ultra-efficient electromagnetic interference shielding

Hongji Duan et al.

Summary: This study adopts an effective strategy to construct a perfect 3D carbon-metal hybrid conductive network in a PA6 matrix, producing composite materials with ultra-efficient EMI shielding performance, offering new possibilities for developing high-performance and affordable EMI shielding composites for next-generation communication applications.

COMPOSITES PART B-ENGINEERING (2021)

Article Nanoscience & Nanotechnology

Environmentally Friendly and Multifunctional Shaddock Peel-Based Carbon Aerogel for Thermal-Insulation and Microwave Absorption

Weihua Gu et al.

Summary: The eco-friendly shaddock peel-derived carbon aerogels were prepared via freeze-drying method, combining multiple functions such as thermal insulation, compression resistance, and microwave absorption. With minimum reflection loss in X band and wide effective absorption bandwidth, the carbon aerogels can achieve high radar cross-sectional reduction values. The novel computer simulation technology used in this study paves the way for preparing multi-functional microwave absorbers derived from biomass raw materials.

NANO-MICRO LETTERS (2021)

Review Chemistry, Physical

Fabrication, mechanisms and perspectives of conductive polymer composites with multiple interfaces for electromagnetic interference shielding: A review

Ming Wang et al.

Summary: This paper discusses the importance of EMI shielding materials in modern society, the drawbacks of metal-based materials, and the advantages of conductive polymer composites. The focus is on how CPC with multiple interfaces can enhance EMI shielding effectiveness.

CARBON (2021)

Article Engineering, Environmental

Multifunctional and corrosion resistant poly(phenylene sulfide)/Ag composites for electromagnetic interference shielding

Wei Ren et al.

Summary: A lightweight, multifunctional and highly efficient EMI shielding polymer composite with a perfect 3D silver conductive network and enhanced interfacial connection was fabricated through a unique silver-sulfur coordination reaction-induced in situ interfacial enhancement approach. The composite exhibited superior electrical conductivity, ultra-efficient EMI shielding effectiveness, excellent thermal conductivity, remarkable corrosion resistance, and satisfactory mechanical properties, showing promising potential in providing ideal EMI protection for next-generation electronics in complex application environments.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Engineering, Environmental

Tuning of anisotropic electrical conductivity and enhancement of EMI shielding of polymer composite foam via CO2-assisted delamination and orientation of MXene

Ruosong Li et al.

Summary: Integration of foam structure into shielding material reduces mass density and enhances EMI shielding performance. The prepared composite films and foams exhibit anisotropy with high in-plane electrical conductivity and low through-plane electrical conductivity, resulting in improved EMI shielding effectiveness and absorption-dominated mechanism. Additionally, the foam structure contributes to outstanding thermal conductivity and mechanical strength.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Engineering, Manufacturing

2D Ti3C2Tx MXene/polyvinylidene fluoride (PVDF) nanocomposites for attenuation of electromagnetic radiation with excellent heat dissipation

Krishnamoorthy Rajavel et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

Article Engineering, Chemical

Facile Fabrication of Multifunctional Poly(ethylene-co-octene)/Carbon Nanotube Foams Based on Tunable Conductive Network

Dawei Xu et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2020)

Article Engineering, Manufacturing

Design of continuous segregated polypropylene/Al2O3 nanocomposites and impact of controlled Al2O3 distribution on thermal conductivity

Xi Zhang et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2020)

Article Nanoscience & Nanotechnology

Multifunctional Bulk Hybrid Foam for Infrared Stealth, Thermal Insulation, and Microwave Absorption

Weihua Gu et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Materials Science, Multidisciplinary

Carbon nanotubes in microwave-assisted foaming and sinter molding of high performance polyetherimide bead foam products

Dong Feng et al.

MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2020)

Article Materials Science, Multidisciplinary

Microwave-assisted selective heating to rapidly construct a nano-cracked hollow sponge for stretch sensing

Pengju Liu et al.

JOURNAL OF MATERIALS CHEMISTRY C (2020)

Article Engineering, Environmental

Flexible and conductive polyurethane composites for electromagnetic shielding and printable circuit

Yadong Xu et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Review Green & Sustainable Science & Technology

Production, characterization and performance of biodiesel as an alternative fuel in diesel engines - A review

H. M. Mahmudul et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

Article Materials Science, Multidisciplinary

A controllable heterogeneous structure and electromagnetic wave absorption properties of Ti2CTx MXene

Xinliang Li et al.

JOURNAL OF MATERIALS CHEMISTRY C (2017)

Article Materials Science, Multidisciplinary

Ti3C2 MXenes modified with in situ grown carbon nanotubes for enhanced electromagnetic wave absorption properties

Xinliang Li et al.

JOURNAL OF MATERIALS CHEMISTRY C (2017)

Article Multidisciplinary Sciences

Welding of 3D-printed carbon nanotube-polymer composites by locally induced microwave heating

Charles B. Sweeney et al.

SCIENCE ADVANCES (2017)

Article Chemistry, Physical

Carbon nanotubes in microwave foaming of thermoplastics

Elham Rezvanpanah et al.

CARBON (2017)

Article Engineering, Chemical

Steam-chest molding of expanded thermoplastic polyurethane bead foams and their mechanical properties

Chengbiao Ge et al.

CHEMICAL ENGINEERING SCIENCE (2017)

Article Nanoscience & Nanotechnology

Microwave Heating of Functionalized Graphene Nanoribbons in Thermoset Polymers for Wellbore Reinforcement

Nam Dong Kim et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Article Chemistry, Multidisciplinary

Structured Reduced Graphene Oxide/Polymer Composites for Ultra-Efficient Electromagnetic Interference Shielding

Ding-Xiang Yan et al.

ADVANCED FUNCTIONAL MATERIALS (2015)

Review Materials Science, Multidisciplinary

Polymer/carbon based composites as electromagnetic interference (EMI) shielding materials

Jean-Michel Thomassin et al.

MATERIALS SCIENCE & ENGINEERING R-REPORTS (2013)

Review Green & Sustainable Science & Technology

A review of energy sources and energy management system in electric vehicles

Siang Fui Tie et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2013)

Article Polymer Science

Influence of Polymer Particle Size on the Percolation Threshold of Electrically Conductive Latex-Based Composites

Gregory P. Moriarty et al.

JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2011)

Article Chemistry, Multidisciplinary

Carbon Nanotubes and Microwaves: Interactions, Responses, and Applications

Ester Vazquez et al.

ACS NANO (2009)

Article Chemistry, Physical

Foams of polycaprolactone/MWNT nanocomposites for efficient EMI reduction

Jean-Michel Thomassin et al.

JOURNAL OF MATERIALS CHEMISTRY (2008)