4.6 Article

Design, preparation, and characterization of CS/PVA/SA hydrogels modified with mesoporous Ag2O/SiO2 and curcumin nanoparticles for green, biocompatible, and antibacterial biopolymer film

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Mechanical

Mechanochemical reactions of GaN-Al2O3 interface at the nanoasperity contact: Roles of crystallographic polarity and ambient humidity

Jian Guo et al.

Summary: The study investigates the mechanochemical reactions at the GaN-Al2O3 interface under different environmental humidity conditions, revealing that the N-face exhibits stronger mechanochemical removal than the Ga-face. Increased water molecules in the environment significantly promote interfacial mechanochemical reactions, accelerating atomic attrition on the N-face. The hypothesized mechanism of selective water-involved mechanochemical removal is associated with the dangling bond configuration, altering the activation energy barrier to form bonding bridges across the sliding interface.

FRICTION (2022)

Article Chemistry, Applied

In-situ crosslinked hydrogel based on amidated pectin/oxidized chitosan as potential wound dressing for skin repairing

Jhaleh Amirian et al.

Summary: By adjusting the content of amine and aldehyde groups from AP and OC, the properties of the hydrogel can be controlled to have desirable gelation time, swelling capability, high hemocompatibility and biocompatibility. The AP-OC-65 hydrogel, in particular, stands out with superior swelling capability and better hemo- and bio-compatibility, showing great potential for applications in wound dressing or skin substitute.

CARBOHYDRATE POLYMERS (2021)

Article Engineering, Multidisciplinary

Analytical approach for crack identification of glass fiber reinforced polymer-sea sand concrete composite structures based on strain dissipations

Dongsheng Xu et al.

Summary: An analytical method was proposed to examine internal crack development in glass fiber reinforced polymer-sea sand concrete composites by analyzing strain dissipation and shear-lag behavior. The method was experimentally verified and showed prediction errors less than 10%. Piezoelectric sensors were used to verify the model, demonstrating accurate evaluation of internal cracks.

STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL (2021)

Article Acoustics

Elastic wave modulation of double-leaf ABH beam embedded mass oscillator

Nansha Gao et al.

Summary: In this study, a double-leaf acoustic black hole beam embedded mass oscillator was proposed for modulation effects on elastic waves. The vibration transmission spectrum analysis allows for adjustments of attenuation amplitude and bandwidth of flexural and longitudinal waves, leading to effective vibration isolation.

APPLIED ACOUSTICS (2021)

Article Materials Science, Ceramics

Systematic study on mechanical and electronic properties of ternary VAlN TiAlN and WAlN systems by first-principles calculations

Lei Chen et al.

Summary: Transition-metal aluminium nitrides, widely used as protective coatings, have been found to exhibit superior mechanical properties in the hexagonal phase V0.5Al0.5N compared to the metastable cubic phase. The mechanical enhancement is attributed to the metallic-to-semiconductor transition and the strengthening of bonds between metal elements and N atoms in the hexagonal phase.

CERAMICS INTERNATIONAL (2021)

Article Instruments & Instrumentation

Therapy of infected wounds: overcoming clinical challenges by advanced drug delivery systems

Pia Kaiser et al.

Summary: The treatment of infected wounds is challenged by inadequate drug concentrations, development of antibiotic resistance, and cytotoxicity of antiseptics. Advanced drug delivery systems have the potential to enable tailor-made application of antimicrobials, resulting in effective treatment of infected wounds.

DRUG DELIVERY AND TRANSLATIONAL RESEARCH (2021)

Article Acoustics

Design, fabrication and sound absorption test of composite porous metamaterial with embedding I-plates into porous polyurethane sponge

Nansha Gao et al.

Summary: This paper proposes a composite porous metamaterial (CPM) consisting of porous polyurethane sponge with embedded multi-layer I-plates to improve the sound absorption performance. By using the Johnson-Champoux-Allard (JCA) model, the sound absorption coefficient of the CPM is characterized, showing significantly improved performance compared to traditional PPS. The study also discusses the effects of geometric parameters on the average sound absorption coefficient, providing valuable insights for designing broadband and efficient sound absorbers.

APPLIED ACOUSTICS (2021)

Article Materials Science, Ceramics

Effect of hexagonal structure nanoparticles on the morphological performance of the ceramic scaffold using analytical oscillation response

Ashkan Farazin et al.

Summary: The study investigated the impact of TiO2 nanoparticles on the properties of PCL porous bone implants, revealing that the addition of TiO2 can alter the physical and mechanical characteristics of the scaffolds, as well as slow down the degradation rate. The fabricated bio-nanocomposite scaffolds demonstrated high total porosity and pore sizes suitable for bone cell growth, indicating potential for use as bone substitutes.

CERAMICS INTERNATIONAL (2021)

Article Mechanics

A time-domain stepwise fatigue assessment to bridge small-scale fracture mechanics with large-scale system dynamics for high-speed maglev lightweight bogies

Feng Guo et al.

Summary: A study on fatigue assessment of maglev bogies was conducted, proposing a TSFA approach to evaluate the safety and reliability of the swing bar identified as the safety critical component. Application of this method yielded a more practical fatigue life, enhancing the service safety and reliability of maglev trains.

ENGINEERING FRACTURE MECHANICS (2021)

Article Thermodynamics

Heat transfer and flow characteristics of Fe3O4 -water nanofluids under magnetic excitation

Xilong Zhang et al.

Summary: The study found that a strong magnetic field significantly enhances heat transfer in magnetic nanofluids, and the direction of the magnetic field has a significant impact on the convective heat transfer coefficient.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2021)

Article Engineering, Marine

Dynamic response of stiffened plate under internal blast: Experimental and numerical investigation

Ying Li et al.

Summary: This paper investigated the dynamic response of stiffened plates under internal blast loading. The study found that the deflection of plates decreased and then increased with an increase in stand-off distance. Additionally, despite increasing deformation resistance, stiffeners tended to reduce the damage tolerance of the plates.

MARINE STRUCTURES (2021)

Article Mechanics

In-situ synchrotron X-ray tomography investigation of the imperfect smooth-shell cylinder structure

Xiaofei Cao et al.

Summary: This study investigates the mechanical behavior of micro Schwarz Primitive triply periodic minimal surfaces (P-TPMS) structures, and quantifies the effect of defects on their compression mechanical performances using various methods. Finite element models were developed to understand the impact of fabrication defects on mechanical behavior, showing that the statistical model was more accurate and efficient. Parametric study was also conducted to gain insight into the role of thickness imperfections on the mechanical performance of the shell.

COMPOSITE STRUCTURES (2021)

Article Automation & Control Systems

Prediction and experimental research of abrasive belt grinding residual stress for titanium alloy based on analytical method

Guijian Xiao et al.

Summary: A theoretical model based on molecular dynamics was proposed to validate the effectiveness of the mathematical model for the surface residual stress of titanium alloys after abrasive belt grinding. Through comparing the simulation and experimental results of grinding residual stress, the effectiveness of the mathematical model was verified.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)

Article Materials Science, Multidisciplinary

Porous N-doped carbon/MnO2 nanoneedles for high performance ionic liquid-based supercapacitors

Hangtian Zhu et al.

Summary: In this study, a novel MnO2/PNC electrode with superior electrochemical performance in IL electrolyte was developed, showcasing large specific capacitance, remarkable rate capability, and favorable electrochemical kinetics.

MATERIALS LETTERS (2021)

Article Environmental Sciences

Effect of Fe3+ on the sludge properties and microbial community structure in a lab-scale A2O process

Lanhe Zhang et al.

Summary: This study demonstrated that an appropriate concentration of Fe3+ can enhance the removal efficiencies of COD and TN in wastewater treatment, while excessive concentration may lead to inhibition. Furthermore, the positive correlation between Fe3+ concentration and TP removal was attributed to the increased surface roughness for enhanced phosphorus adsorption onto activated sludge. Thauera was identified as the dominant bacterial genus, and certain bacteria showed good adaptability to high concentration of Fe3+ within the bacterial community. Gene families related to Carbohydrate Metabolism, Amino Acid Metabolism, Cell Motility, Membrane Transport, and Replication and Repair were found to be the most abundant functional genes in the metabolic pathways.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

Article Engineering, Mechanical

Interplay between counter-surface chemistry and mechanical activation in mechanochemical removal of N-faced GaN surface in humid ambient

Jian Guo et al.

Summary: The mechanical removal of GaN using diamond tip and mechanochemical removal using Al2O3 tip are described by the Archard equation and mechanically assisted Arrhenius-type kinetic model, respectively. Material removal under elastic contact with the assistance of interfacial mechanochemical reactions is evident. The critical activation volume and activation barrier are determined semiquantitatively by analyzing the mechanochemical reactions with Arrhenius-type kinetic model and Hertzian contact mechanics. The mechanical activation from the chemically active counter-surface facilitates the mechanochemical atomic attrition by altering the energy barrier of the reaction kinetics.

TRIBOLOGY INTERNATIONAL (2021)

Article Multidisciplinary Sciences

Investigation of the effects of electrochemical reactions on complex metal tribocorrosion within the human body

Thomas S. Welles et al.

Summary: Common Metal-on-Metal (MoM) hip implants developed in the past decade suffer from severe inflammatory reactions due to premature corrosion and degradation. Research has found that minor electric potential oscillations can replicate the corrosion of failed implants without the introduction of mechanical wear, leading to potential development of electrochemically resistant implantable materials in the future.

HELIYON (2021)

Article Chemistry, Multidisciplinary

Regio- and stereoselective electrochemical synthesis of sulfonylated enethers from alkynes and sulfonyl hydrazides

Wu-Bo Du et al.

Summary: An electrooxidative direct difunctionalization of internal alkynes with sulfonyl hydrazides has been developed for the construction of sulfonated enethers. This method does not require metal catalysts or stoichiometric amount of oxidants, and only yields molecular nitrogen and hydrogen as byproducts, providing a simple and green approach. The protocol can be efficiently scaled up, and the follow-up procedures of the corresponding functionalized alkenes demonstrate the practicality of the electrochemical synthesis.

GREEN CHEMISTRY (2021)

Article Chemistry, Physical

A moisture balanced antibacterial dressing loaded with lysozyme possesses antibacterial activity and promotes wound healing

Ling Xiao et al.

Summary: The study explored the moisture balance of polyurethane foam dressings and constructed a safe and effective moisture balanced antibacterial dressing by loading lysozyme onto it. Results showed that wound healing speed was fastest at 25% humidity. In vivo and in vitro experiments demonstrated the superior antibacterial performance of the dressing after lysozyme loading.

SOFT MATTER (2021)

Article Materials Science, Paper & Wood

Fabrication of Cellulosic Paper Containing Zeolitic Imidazolate Framework and Its Application in Removal of Anionic Dye from Aqueous Solution

Zicheng Chen et al.

Summary: The study demonstrates a simple approach for fabricating cellulosic paper containing ZIF-8 through in-situ loading, showing high efficiency in removing anionic dyes from aqueous solution.

BIORESOURCES (2021)

Review Materials Science, Biomaterials

Advances of hydrogel dressings in diabetic wounds

Heni Wang et al.

Summary: Hydrogel dressings with moisture retention, biocompatibility, and therapeutic properties have played a crucial role in diabetic wound treatment. Recent studies have shown promising results with functionalized hydrogel dressings, leading to improvements in diabetic wounds.

BIOMATERIALS SCIENCE (2021)

Article Chemistry, Multidisciplinary

Construction of a PPIL@COF core-shell composite with enhanced catalytic activity for CO2 conversion

Yi-Ran Du et al.

Summary: Integrating PPIL with COF and designing a specific ratio of PPIL@COF hybrids can enhance CO2 storage capacity, facilitating efficient catalytic transformation in CO2 conversion. The presence of hydroxyl groups at the interfacial layer can cooperate with bromides from the PPIL core to facilitate the rate-limiting step of the ring opening of the epoxides, improving the reactivity of benchmark reactions.

GREEN CHEMISTRY (2021)

Article Chemistry, Multidisciplinary

Complete conversion of lignocellulosic biomass to mixed organic acids and ethylene glycol via cascade steps

Jifeng Pang et al.

Summary: A cascade-step strategy was developed to convert hemicellulose and lignin into mixed organic acids, and cellulose into ethylene glycol using formic acid and H2O2 as catalysts. This method achieved high weight yields and selectivities, offering a potential strategy for complete valorisation of biomass into value-added chemicals.

GREEN CHEMISTRY (2021)

Article Chemistry, Multidisciplinary

Ultrasound accelerated near-edge functionalized heterogeneous graphene oxide sonocatalyst for surface optical bandwidth efficacy and in situ sonothermocatalysis

Gopal Avashthi et al.

Summary: A novel ultrasonochemical method for functionalizing graphene oxide with sulfanilamide has been successfully developed, leading to the creation of graphene oxide materials with efficient sonocatalytic properties. The study revealed that the electronic bandwidth of sulfanilamide-functionalized graphene oxide structures is reduced, and they exhibit higher efficiency in sonocatalytic degradation of methylene blue compared to regular graphene oxide.

NEW JOURNAL OF CHEMISTRY (2021)

Article Chemistry, Multidisciplinary

Effect of the electronic structure on the robustness of ruthenium(ii) bis-phenanthroline compounds for photodissociation of the co-ligand: synthesis, structural characterization, and density functional theory study

Megha S. Deshpande et al.

Summary: Distorted octahedral ruthenium(ii) bis-phenanthroline compounds were synthesized and their photochemistry was studied. The photodissociation of N-heterocyclic co-ligands upon blue light irradiation occurred at different rates in different co-ligands, with the first ligand dissociating faster. Density functional theory (DFT) calculations and molecular orbital analysis provided insights into the geometries and energetics of the dissociation process.

NEW JOURNAL OF CHEMISTRY (2021)

Review Chemistry, Physical

Unified mechanistic interpretation of amine-assisted silica synthesis methods to enable design of more complex materials

Joseph R. H. Manning et al.

Summary: Research on design of porous sol-gel silica materials with amine additives is a thriving area, aiming to control the synthesis process. While progress has been made, there is still a difficulty in replicating the complexity of naturally occurring biosilica materials.

MOLECULAR SYSTEMS DESIGN & ENGINEERING (2021)

Review Chemistry, Multidisciplinary

Small molecule drug conjugates (SMDCs): an emerging strategy for anticancer drug design and discovery

Tarun Kumar Patel et al.

Summary: Traditional chemotherapy using cytotoxic agents often leads to off-target toxicities, while Small molecule drug conjugates (SMDCs) show great promise in releasing drugs selectively in the tumor microenvironment. Compared to antibody drug conjugates (ADCs), SMDCs have advantages and are already in clinical trials with potential for targeted cancer therapy.

NEW JOURNAL OF CHEMISTRY (2021)

Article Chemistry, Multidisciplinary

A Bronsted acidic ionic liquid anchored to magnetite nanoparticles as a novel recoverable heterogeneous catalyst for the Biginelli reaction

Hourieh Sadat Oboudatian et al.

Summary: This study utilized a chemical co-precipitation method to prepare Fe3O4 nanoparticles, followed by coating a SiO2 shell using the Stober method, and finally coating CPTES and morpholine on the SiO2 shell to successfully synthesize Mag@Morph-AIL. The nanocatalyst showed easy separation, recyclability, non-toxicity, versatility, high stability, short reaction times, and excellent yields, making it a useful method for the preparation of 3,4-dihydropyrimidinones.

RSC ADVANCES (2021)

Review Chemistry, Multidisciplinary

Biomolecule-assisted synthesis of biomimetic nanocomposite hydrogel for hemostatic and wound heating applications

Sujoy K. Das et al.

Summary: Hydrogels are water-rich structures formed by crosslinking of hydrophilic monomers, mimicking the extracellular matrix of biological soft tissues, and having widespread applications in the biomedical field. Nanocomposite hydrogels incorporate diverse nanomaterials into soft polymer matrixes to enhance the physical, chemical, and biological properties of the hydrogels, resulting in improved characteristics.

GREEN CHEMISTRY (2021)

Article Chemistry, Multidisciplinary

An environmentally friendly wound dressing based on a self-healing, extensible and compressible antibacterial hydrogel

Maryam Tavakolizadeh et al.

Summary: The ultra-tough and self-healable double-network hydrogel designed based on salep/poly(vinyl alcohol) demonstrates superior tissue adhesiveness, high mechanical strength, good tissue adhesiveness, and excellent therapeutic properties for wound healing. The self-healing capability is achieved through interactions between oxidized salep and ethylene diamine-modified salep chains, as well as through the hydroxyl groups of the poly(vinyl alcohol) network. In vitro and in vivo tests confirm that this hydrogel could be a promising candidate for skin tissue regeneration in medical applications.

GREEN CHEMISTRY (2021)

Review Materials Science, Biomaterials

Functional silk fibroin hydrogels: preparation, properties and applications

Haiyan Zheng et al.

Summary: Traditional silk protein hydrogels have limitations in terms of structure and functionality, but the development of functional silk protein hydrogels presents opportunities to overcome these limitations, attracting attention from scholars worldwide.

JOURNAL OF MATERIALS CHEMISTRY B (2021)

Article Chemistry, Multidisciplinary

Layer-by-layer coated nanoliposomes for oral delivery of insulin

Yiming Zhang et al.

Summary: The study developed a multi-layered insulin loading strategy on an anionic nanoliposome surface based on electrostatic interaction, achieving high insulin loading and protection in simulated gastrointestinal environments. In rat studies, oral administration of the formulation resulted in rapid absorption with peak plasma insulin levels reached at 0.5 hours post oral gavaging, making it promising for potential oral insulin applications.

NANOSCALE (2021)

Article Nanoscience & Nanotechnology

Multiplex Protein Imaging with Secondary Ion Mass Spectrometry Using Metal Oxide Nanoparticle-Conjugated Antibodies

Dae Won Moon et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Nanoscience & Nanotechnology

Flexible Carbon-Fiber/Semimetal Bi Nanosheet Arrays as Separable and Recyclable Plasmonic Photocatalysts and Photoelectrocatalysts

Yanling Yang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Biochemistry & Molecular Biology

Synthesis of physically crosslinked PVA/Chitosan loaded silver nanoparticles hydrogels with tunable mechanical properties and antibacterial effects

Arun Kumar et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)

Article Materials Science, Multidisciplinary

The significance of dispersion of nano-SiO2 on early age hydration of cement pastes

Pan Feng et al.

MATERIALS & DESIGN (2020)

Article Multidisciplinary Sciences

Polydeoxyribonucleotide-delivering therapeutic hydrogel for diabetic wound healing

Da Yong Shin et al.

SCIENTIFIC REPORTS (2020)

Article Nanoscience & Nanotechnology

Multifunctional Textiles/Metal-Organic Frameworks Composites for Efficient Ultraviolet Radiation Blocking and Noise Reduction

Kun Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Review Biochemistry & Molecular Biology

Carboxymethyl cellulose-based materials for infection control and wound healing: A review

Vimala Kanikireddy et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)

Review Materials Science, Biomaterials

Core-shell nanostructures: perspectives towards drug delivery applications

Raj Kumar et al.

JOURNAL OF MATERIALS CHEMISTRY B (2020)

Review Chemistry, Physical

A review on recent advances in polymer and peptide hydrogels

Sanjoy Mondal et al.

SOFT MATTER (2020)

Article Biochemistry & Molecular Biology

Wound dressing based on electrospun PVA/chitosan/starch nanofibrous mats: Fabrication, antibacterial and cytocompatibility evaluation and in vitro healing assay

Hassan Adeli et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2019)

Review Materials Science, Biomaterials

Multifunctional cellulose-based hydrogels for biomedical applications

Lian-Hua Fu et al.

JOURNAL OF MATERIALS CHEMISTRY B (2019)

Article Chemistry, Multidisciplinary

High strength nanostructured films based on well-preserved β-chitin nanofibrils

Qiong Wu et al.

NANOSCALE (2019)

Review Chemistry, Multidisciplinary

Synergy between nanomaterials and volatile organic compounds for non-invasive medical evaluation

Yoav Y. Broza et al.

CHEMICAL SOCIETY REVIEWS (2018)

Article Biochemistry & Molecular Biology

In vitro and in vivo study of PCL/COLL wound dressing loaded with insulin-chitosan nanoparticles on cutaneous wound healing in rats model

Arian Ehterami et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2018)

Article Chemistry, Physical

Optimal propulsion of an undulating slender body with anisotropic friction

Baptiste Darbois Texier et al.

SOFT MATTER (2018)

Review Chemistry, Multidisciplinary

Synthesis and applications of nanoporous perovskite metal oxides

Xiubing Huang et al.

CHEMICAL SCIENCE (2018)

Article Chemistry, Multidisciplinary

Anisotropic swelling wound dressings with vertically aligned water absorptive particles

Yuanhao Guo et al.

RSC ADVANCES (2018)

Article Biochemistry & Molecular Biology

Prediction of metabolic fluxes from gene expression data with Huber penalty convex optimization function

Shao-Wu Zhang et al.

MOLECULAR BIOSYSTEMS (2017)

Review Materials Science, Biomaterials

Recent advances in biomaterials for the treatment of diabetic foot ulcers

Lisa N. Kasiewicz et al.

BIOMATERIALS SCIENCE (2017)

Article Materials Science, Biomaterials

Biohybrid methacrylated gelatin/polyacrylamide hydrogels for cartilage repair

Lu Han et al.

JOURNAL OF MATERIALS CHEMISTRY B (2017)

Article Nanoscience & Nanotechnology

Novel Asymmetric Wettable AgNPs/Chitosan Wound Dressing: In Vitro and In Vivo Evaluation

Donghui Liang et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Article Chemistry, Physical

Light induced antibacterial activity and photocatalytic properties of Ag/Ag3PO4 -based material of marine origin

C. Piccirillo et al.

JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY (2015)

Review Biochemistry & Molecular Biology

Metabolomics - the complementary field in systems biology: a review on obesity and type 2 diabetes

Mohamad Hafizi Abu Bakar et al.

MOLECULAR BIOSYSTEMS (2015)

Article Chemistry, Multidisciplinary

Copper nanoparticles as an efflux pump inhibitor to tackle drug resistant bacteria

Lowrence Rene Christena et al.

RSC ADVANCES (2015)

Article Materials Science, Biomaterials

Factors affecting the stability of chitosan/tripolyphosphate micro- and nanogels: resolving the opposing findings

Yan Huang et al.

JOURNAL OF MATERIALS CHEMISTRY B (2015)

Article Chemistry, Multidisciplinary

Highly active and durable non-precious-metal catalysts encapsulated in carbon nanotubes for hydrogen evolution reaction

Jiao Deng et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

Article Chemistry, Multidisciplinary

Single-cell force spectroscopy of pili-mediated adhesion

Ruby May A. Sullan et al.

NANOSCALE (2014)

Article Chemistry, Multidisciplinary

p-Sulfonatocalix[4]arene as a carrier for curcumin

Paulpandian Muthu Mareeswaran et al.

NEW JOURNAL OF CHEMISTRY (2014)

Article Chemistry, Physical

Dynamic self-assembly of motile bacteria in liquid crystals

Peter C. Mushenheim et al.

SOFT MATTER (2014)

Article Materials Science, Biomaterials

Chitosan-based scaffolds for bone tissue engineering

Sheeny K. Lan Levengood et al.

JOURNAL OF MATERIALS CHEMISTRY B (2014)

Article Chemistry, Analytical

Wound infection kinetics probed by MALDI-MS: rapid profiling of Staphylococcus aureus in mice

Jayaram Lakshmaiah Narayana et al.

ANALYST (2012)

Article Chemistry, Multidisciplinary

Chemical and biological sensors based on metal oxide nanostructures

Yoon-Bong Hahn et al.

CHEMICAL COMMUNICATIONS (2012)

Review Chemistry, Medicinal

Biocompatibility of Mesoporous Silica Nanoparticles

Tewodros Asefa et al.

CHEMICAL RESEARCH IN TOXICOLOGY (2012)

Review Biotechnology & Applied Microbiology

Biomaterials based on chitin and chitosan in wound dressing applications

R. Jayakumar et al.

BIOTECHNOLOGY ADVANCES (2011)

Review Chemistry, Analytical

Relationship of polychlorinated biphenyls with type 2 diabetes and hypertension

Charles Jay Everett et al.

JOURNAL OF ENVIRONMENTAL MONITORING (2011)

Article Chemistry, Physical

Surface functionalization of magnetic mesoporous silica nanoparticles for controlled drug release

Baisong Chang et al.

JOURNAL OF MATERIALS CHEMISTRY (2010)

Article Engineering, Biomedical

How useful is SBF in predicting in vivo bone bioactivity?

T Kokubo et al.

BIOMATERIALS (2006)

Article Engineering, Biomedical

Control of wound infections using a bilayer chitosan wound dressing with sustainable antibiotic delivery

FL Mi et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH (2002)

Article Materials Science, Multidisciplinary

Sol-gel synthesis and characterization of the Ag2O-SiO2 system

N Satyanarayana et al.

MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY (2000)