☆ 4.7 Article

Grindability of carbon fiber reinforced polymer using CNT biological lubricant

SCIENTIFIC REPORTS (2021)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Review Engineering, Mechanical

Nano-enhanced biolubricant in sustainable manufacturing: From processability to mechanisms

Yanbin Zhang et al.

Summary: This paper investigates the application of nano-enhanced biolubricant (NEBL) in minimum quantity lubrication (MQL) machining and analyzes its performance and mechanisms in processes such as turning, milling, and grinding. By quantitatively comparing with biolubricant, the advanced lubrication and heat transfer mechanisms of NEBL are revealed. Furthermore, future development directions and improvement methods for NEBL are proposed.

FRICTION (2022)

添加到收藏夹

Article Engineering, Aerospace

Minimum quantity lubrication machining of aeronautical materials using carbon group nanolubricant: From mechanisms to application

Xin Cui et al.

Summary: Replacing flood and dry machining with minimum quantity lubrication (MQL) technology is an inevitable trend of sustainable manufacturing. However, MQL cannot meet the high demand for cooling and lubrication in the machining of aeronautical difficult-to-machine materials. This study focuses on the comprehensive quantitative assessment of tribological characteristics in titanium alloy and nickel alloy machining using nano-biolubricants, specifically non-toxic carbon group nano-enhancers (CGNs), aiming to systematically answer the machining mechanisms under lubrication of CGNs.

CHINESE JOURNAL OF AERONAUTICS (2022)

添加到收藏夹

Review Green & Sustainable Science & Technology

Eco-Friendly Cutting Fluids in Minimum Quantity Lubrication Assisted Machining: A Review on the Perception of Sustainable Manufacturing

Binayak Sen et al.

Summary: This paper summarizes previous research articles on minimum quantity lubrication (MQL) assisted machining, highlighting the shift towards sustainability that prompts researchers to reconsider the effects of different lubrication methods on machining. Recent studies suggest that the use of vegetable oil, nanofluids, and nanoplatelets in MQL system outperforms traditional lubrication technology in terms of machining performance. These findings demonstrate the environmentally friendly nature of MQL technology as a viable alternative to flood lubrication.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Aerospace

Milling surface roughness for 7050 aluminum alloy cavity influenced by nozzle position of nanofluid minimum quantity lubrication

Zhenjing Duan et al.

Summary: In NMQL milling of aviation aluminum alloy, adjusting the nozzle position parameters is crucial but challenging due to large errors. The study revealed the impact of cutter speed, helical angle, and cavity shape on the flow field, leading to optimal nozzle profile parameters. The results showed that the proper combination of target distance, incidence angle, and elevation angle significantly improved surface roughness, with target distance having the most substantial impact on cutting performance.

CHINESE JOURNAL OF AERONAUTICS (2021)

添加到收藏夹

Review Engineering, Aerospace

Advances in fabrication of ceramic corundum abrasives based on sol-gel process

Baoteng Huang et al.

Summary: Corundum abrasives are widely used in precision machining, but they cannot meet the requirements of difficult-to-machine materials. Ceramic corundum abrasives fabricated by sol-gel method offer a cost-effective solution with self-sharpening and high toughness. Optimization methods for ceramic corundum abrasive properties include precursor synthesis, particle shaping, sintering, and the use of new sintering techniques to improve microstructural and mechanical performance.

CHINESE JOURNAL OF AERONAUTICS (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Convective Heat Transfer Coefficient Model Under Nanofluid Minimum Quantity Lubrication Coupled with Cryogenic Air Grinding Ti-6Al-4V

Jianchao Zhang et al.

Summary: A new environmentally sustainable approach, CNMQL, is proposed to address the unfavorable lubricating characteristic of cryogenic air and the deficient cooling performance of minimum quantity lubrication. A convective heat transfer coefficient model was established to investigate the heat transfer mechanism of vortex tube cold air fraction by CNMQL. Experimental verification showed that when the cold air fraction was 0.35, nanofluids exhibited low specific grinding energy, high viscosity, and a large contact angle.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Consequence of aging at Au/HTM/perovskite interface in triple cation 3D and 2D/3D hybrid perovskite solar cells

Zubair Ahmad et al.

Summary: Perovskite solar cells show great promise as an alternative to traditional photovoltaic technologies, with 2D/3D hybrid cells offering improved stability and efficiency. However, further research is needed on the degradation processes and charge dynamics at interfaces to enhance long-term performance. Analysis of the Au/HTM/perovskite interface degradation suggests it significantly impacts charge accumulation and impedance, leading to efficiency loss.

SCIENTIFIC REPORTS (2021)

添加到收藏夹

Article Engineering, Mechanical

Penetration and lubrication evaluation of vegetable oil with nanographite particles for broaching process

Ming Xu et al.

Summary: Research has shown that there is an optimal concentration of nanographite particles in NFCFs that can achieve the best cutting lubrication effect.

FRICTION (2021)

添加到收藏夹

Article Automation & Control Systems

Temperature of the 45 steel in the minimum quantity lubricant milling with different biolubricants

Lan Dong et al.

Summary: The study found that using different vegetable oils as base oils for MQL milling can reduce temperature and improve workpiece surface quality. Among them, cottonseed oil, palm oil, and castor oil performed well in MQL milling.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Effects of Physicochemical Properties of Different Base Oils on Friction Coefficient and Surface Roughness in MQL Milling AISI 1045

Qingan Yin et al.

Summary: Research found that palm oil showed the best lubrication effect among different vegetable oils, achieving the lowest milling force, friction coefficient, and surface roughness values, resulting in the smoothest workpiece surface. Analysis revealed that palm oil, with a high content of saturated fatty acids, high viscosity, and small contact angle, could form the strongest lubricating oil film at the tool-workpiece interface.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Manufacturing

Semiempirical heat flux model of hard-brittle bone material in ductile microgrinding

Min Yang et al.

Summary: A semiempirical heat flux theoretical model based on the dynamic grinding force of hard-brittle bone ductile microgrinding is proposed to solve the calculation error problem in bone microgrinding temperature field. Experimental results show high consistency between theoretical calculations and actual measurements, with an average error of less than 7.7%. This model allows for precise control of temperature distribution during hard-brittle bone microgrinding processes through mechanical processing theory.

JOURNAL OF MANUFACTURING PROCESSES (2021)

添加到收藏夹

Article Engineering, Industrial

Mechanics analysis and predictive force models for the single-diamond grain grinding of carbon fiber reinforced polymers using CNT nano-lubricant

Teng Gao et al.

Summary: The study compared the mechanical properties of CFRP in flood cooling and dry grinding, and proposed the grinding mechanics with CNT nano-lubricant minimum quantity lubrication. Four sub-models were developed to explain the grinding mechanisms of CFRP under special transversal conditions.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)

添加到收藏夹

Article Thermodynamics

Predictive model of convective heat transfer coefficient in bone micro-grinding using nanofluid aerosol cooling

Min Yang et al.

Summary: The study investigates the convective heat transfer characteristics and measurement methods of nanofluid aerosol cooling, establishing a theoretical model for the convective heat transfer coefficient and proposing a new measurement device to validate the theoretical model.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Engineering, Industrial

Controllable generation of 3D textured abrasive tools via multiple-pass laser ablation

Hao Nan Li et al.

Summary: This study explores the fabrication of Textured Abrasive Tool (TAT) using laser ablation technique, proposing a laser parameter selection strategy based on experimental and theoretical analysis. The produced TATs with different structures showed superior performance in grinding trials, indicating the potential for next-generation advanced abrasive tools embedded with complex and functional 3D machining elements.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)

添加到收藏夹

Review Engineering, Mechanical

Cryogenic minimum quantity lubrication machining: from mechanism to application

Mingzheng Liu et al.

Summary: The article discusses the role of cutting fluid in metal cutting and the environmental issues associated with traditional flood machining. It then explores the limitations of alternative technologies such as MQL and cryogenic cooling, and the potential of combining the two in CMQL technology. The benefits, mechanisms, and application prospects of CMQL are systematically analyzed, showing its superiority over cryogenic or MQL alone.

FRONTIERS OF MECHANICAL ENGINEERING (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Damage behaviors of unidirectional CFRP in orthogonal cutting: A comparison between single- and multiple-pass strategies

Hao Nan Li et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Article Automation & Control Systems

Physicochemical properties of degradable vegetable-based oils on minimum quantity lubrication milling

Xiufang Bai et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Manufacturing

Surface morphology evaluation of multi-angle 2D ultrasonic vibration integrated with nanofluid minimum quantity lubrication grinding

Teng Gao et al.

JOURNAL OF MANUFACTURING PROCESSES (2020)

添加到收藏夹

Article Engineering, Mechanical

A mechanistic cutting force model based on ductile and brittle fracture material removal modes for edge surface grinding of CFRP composites using rotary ultrasonic machining

Hui Wang et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

添加到收藏夹

Article Green & Sustainable Science & Technology

Surface morphology assessment of CFRP transverse grinding using CNT nanofluid minimum quantity lubrication

Teng Gao et al.

JOURNAL OF CLEANER PRODUCTION (2020)

添加到收藏夹

Review Engineering, Manufacturing

Review of ultrasonic vibration-assisted machining in advanced materials

Zhichao Yang et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Thermal influence on surface layer of carbon fiber reinforced plastic (CFRP) in grinding

Hiroyuki Kodama et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2020)

添加到收藏夹

Review Engineering, Manufacturing

Vegetable oil-based nanofluid minimum quantity lubrication turning: Academic review and perspectives

Xiaoming Wang et al.

JOURNAL OF MANUFACTURING PROCESSES (2020)

添加到收藏夹

Article Automation & Control Systems

Effect of friction coefficient on chip thickness models in ductile-regime grinding of zirconia ceramics

Min Yang et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

添加到收藏夹

Article Automation & Control Systems

Contribution for minimization the usage of cutting fluids in CFRP grinding

Rafael Lemes Rodriguez et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

添加到收藏夹

Article Engineering, Mechanical

Dispersing mechanism and tribological performance of vegetable oil-based CNT nanofluids with different surfactants

Teng Gao et al.

TRIBOLOGY INTERNATIONAL (2019)

添加到收藏夹

Article Materials Science, Ceramics

Predictive model for minimum chip thickness and size effect in single diamond grain grinding of zirconia ceramics under different lubricating conditions

Min Yang et al.

CERAMICS INTERNATIONAL (2019)

添加到收藏夹

Review Mechanics

Delamination formation, evaluation and suppression during drilling of composite laminates: A review

Daxi Geng et al.

COMPOSITE STRUCTURES (2019)

添加到收藏夹

Review Materials Science, Ceramics

A review on machining of carbon fiber reinforced ceramic matrix composites

Jinguang Du et al.

CERAMICS INTERNATIONAL (2019)

添加到收藏夹

Review Automation & Control Systems

Recent advances in drilling of carbon fiber-reinforced polymers for aerospace applications: a review

Muhammad Aamir et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

添加到收藏夹

Review Green & Sustainable Science & Technology

Recent Advances in the Machining of Titanium Alloys using Minimum Quantity Lubrication (MQL) Based Techniques

Salman Pervaiz et al.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2019)

添加到收藏夹

Article Engineering, Manufacturing

Feasibility of Ultrasonic Vibration Assisted Grinding for Carbon Fiber Reinforced Polymer with Monolayer Brazed Grinding Tools

Yuhong Liang et al.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2019)

添加到收藏夹

Article Automation & Control Systems

Surface grinding of CFRP composites using rotary ultrasonic machining: a comparison of workpiece machining orientations

Hui Wang et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)

添加到收藏夹

Review Materials Science, Ceramics

Damage formation and suppression in rotary ultrasonic machining of hard and brittle materials: A critical review

Jianjian Wang et al.

CERAMICS INTERNATIONAL (2018)

添加到收藏夹

Article Automation & Control Systems

Modeling of tool blockage condition in cutting tool design for rotary ultrasonic machining of composites

Songmei Yuan et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)

添加到收藏夹

Article Automation & Control Systems

Analysis of flow field in cutting zone for spiral orderly distributed fiber tool

Mingjun Zhang et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)

添加到收藏夹

Article Engineering, Manufacturing

Analysis of grinding mechanics and improved predictive force model based on material-removal and plastic-stacking mechanisms

Yanbin Zhang et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2017)

添加到收藏夹

Article Green & Sustainable Science & Technology

Heat transfer performance of MQL grinding with different nanofluids for Ni-based alloys using vegetable oil

Benkai Li et al.

JOURNAL OF CLEANER PRODUCTION (2017)

添加到收藏夹

Article Green & Sustainable Science & Technology

Experimental evaluation of the lubrication performance of mixtures of castor oil with other vegetable oils in MQL grinding of nickel-based alloy

Shuming Guo et al.

JOURNAL OF CLEANER PRODUCTION (2017)

添加到收藏夹

Article Mechanics

Size effect of depth of cut on chip formation mechanism in machining of CFRP

Youliang Su et al.

COMPOSITE STRUCTURES (2017)

添加到收藏夹

Article Automation & Control Systems

Investigation of chip formation and fracture toughness in orthogonal cutting of UD-CFRP

Hao Li et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)

添加到收藏夹

Article Engineering, Aerospace

Grinding temperature and energy ratio coefficient in MQL grinding of high-temperature nickel-base alloy by using different vegetable oils as base oil

Li Benkai et al.

CHINESE JOURNAL OF AERONAUTICS (2016)

添加到收藏夹

Article Engineering, Manufacturing

Effect of tool vibration on chip formation and cutting forces in the machining of fiber-reinforced polymer composites

Weixing Xu et al.

MACHINING SCIENCE AND TECHNOLOGY (2016)

添加到收藏夹

Article Acoustics

Rotary ultrasonic machining of CFRP: A comparison with grinding

F. D. Ning et al.

ULTRASONICS (2016)

添加到收藏夹

Article Engineering, Industrial

High performance cutting of advanced aerospace alloys and composite materials

Rachid M'Saoubi et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2015)

添加到收藏夹

Article Engineering, Mechanical

Numerical prediction of the chip formation process and induced damage during the machining of carbon/epoxy composites

S. Zenia et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2015)

添加到收藏夹

Article Engineering, Manufacturing

AN INVESTIGATION OF CUTTING MECHANISMS AND STRAIN FIELDS DURING ORTHOGONAL CUTTING IN CFRPs

Harshit Agarwal et al.

MACHINING SCIENCE AND TECHNOLOGY (2015)

添加到收藏夹

Article Engineering, Manufacturing

Machining of Carbon Fiber Reinforced Plastics/Polymers: A Literature Review

Demeng Che et al.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2014)

添加到收藏夹

Article Engineering, Multidisciplinary

Surface grinding of carbon fiber reinforced plastic (CFRP) with an internal coolant supplied through grinding wheel

Hiroyuki Sasahara et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2014)

添加到收藏夹

Review Mechanics

A review of mechanical drilling for composite laminates

DeFu Liu et al.

COMPOSITE STRUCTURES (2012)

添加到收藏夹

Article Engineering, Manufacturing

Development of specific grinding energy model

Vijayender Singh et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2012)

添加到收藏夹

Article Chemistry, Physical

A simple and fast method to disperse long single-walled carbon nanotubes introducing few defects

Tatsuhiro Yamamoto et al.

CARBON (2011)

添加到收藏夹

Article Materials Science, Composites

Modelling of chip separation in machining unidirectional FRP composites by stiffness degradation concept

L. Lasri et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2009)

添加到收藏夹

Article Materials Science, Composites

Machining of UD-GFRP composites chip formation mechanism

G. Venu Gopala Rao et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2007)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.