☆ 4.4 Article

Reynolds Model versus JFO Theory in Steadily Loaded Journal Bearings

LUBRICANTS (2021)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Mechanical

An investigation on the lubrication characteristics of floating ring bearing with consideration of multi-coupling factors

Zhongliang Xie et al.

Summary: The paper investigates the static and dynamic lubrication parameters of the floating ring bearing (FRB) by proposing modified lubrication models and utilizing multiscale methods to enhance calculation accuracy and efficiency. The study analyzes the influence of various factors on lubrication performances and concludes that the clearance ratio affects the inner oil film while the vertical load influences the bearing's lubrication performances. These conclusions are applicable to similar floating ring bearings.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2022)

添加到收藏夹

Review Engineering, Mechanical

Qualitative potentials of surface textures and coatings in the performance of fluid-film bearings: a critical review

Nitin Sharma et al.

Summary: This article systematically reviews previous studies on the successful implementation of surface textures and coatings in fluid film bearing systems to improve tribological performance, with a focus on understanding the physical causes behind the success of these methods.

SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES (2021)

添加到收藏夹

Article Engineering, Mechanical

Theoretical and experimental exploration on the micro asperity contact load ratios and lubrication regimes transition for water-lubricated stern tube bearing

Zhongliang Xie et al.

Summary: The paper investigates the micro asperity contact load ratios and lubrication states of water-lubricated bearings. New coupled models are proposed to consider the micro-scale effects of asperity contact. The study establishes the relevance of load ratio with transition of lubrication regimes under various structural parameters and operating conditions, revealing the mechanism of regimes transition at the micro level. Experimental measurements verify the correctness of the revised model.

TRIBOLOGY INTERNATIONAL (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Local Adaptive Mesh Refinement for JFO Cavitation Model on Cartesian Meshes

Wanjun Xu et al.

Summary: Nonuniform mesh can reduce computational cost and improve resolution, with a cell-based adaptive mesh refinement method allowing for optimized bearing mesh and increased computational efficiency.

APPLIED SCIENCES-BASEL (2021)

添加到收藏夹

Review Green & Sustainable Science & Technology

Lubrication of textured journal bearing by using vegetable oil: A review of approaches, challenges, and opportunities

Z. Rasep et al.

Summary: Vegetable oils are seen as potential bio lubricants that could replace traditional mineral oils in the future, offering unique environmental benefits. Surface modification of journal bearings has gained attention for its ability to enhance performance. The combination of textured journal bearings and vegetable oil shows promise for various industrial applications.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)

添加到收藏夹

Article Engineering, Mechanical

Reynolds Boundary Condition Approximation in Journal Bearings Based on Dynamic Mesh Method

Wanjun Xu et al.

Summary: This paper proposed a new approach for Reynolds boundary condition approximation in journal bearing CFD analysis, utilizing dynamic mesh method to approach the location where the rupture of oil film or cavitation started. The results were compared with published works, showing consistency with slight differences observed from those obtained via cavitation experiments and models. It is considered as an alternative approach for cavitation models intended for journal bearings.

TRIBOLOGY ONLINE (2021)

添加到收藏夹

Article Engineering, Mechanical

Analysis of the Effect of the Slip-Pocket in Single and Double Parallel Bearing Considering Cavitation: A Theoretical Approach

M. Muchammad et al.

Summary: This paper investigates the effect of pockets and boundary slip on the hydrodynamic performance of parallel sliding surfaces considering cavitation. The results show that the pocket depth reduces the cavitation area, with a more significant effect in reducing cavitation in the case of a single pocket bearing.

LUBRICANTS (2021)

添加到收藏夹

Article Engineering, Mechanical

Numerical Analysis of Grease Film Thickness and Thickener Concentration in Elastohydrodynamic Lubrication of Point Contacts

Takashi Nogi et al.

TRIBOLOGY TRANSACTIONS (2020)

添加到收藏夹

Article Materials Science, Coatings & Films

Texture shape effects on hydrodynamic journal bearing performances using mass-conserving numerical approach

B. Manser et al.

TRIBOLOGY-MATERIALS SURFACES & INTERFACES (2020)

添加到收藏夹

Article Engineering, Chemical

Comparison of hydrodynamic characteristics between circumferential and transversal microgrooved journal bearings

Yanxiang Han et al.

LUBRICATION SCIENCE (2019)

添加到收藏夹

Article Engineering, Mechanical

Experimental investigation into surface texture effect on journal bearings performance

Lidia Galda et al.

TRIBOLOGY INTERNATIONAL (2019)

添加到收藏夹

Article Engineering, Mechanical

Numerical and Experimental Analyses of the Dynamic Characteristics of Journal Bearings With Square Dimples

Hiroyuki Yamada et al.

JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2018)

添加到收藏夹

Article Engineering, Mechanical

Experimental and Numerical Analysis on the Seizure of a Carbon-Filled PTFE Central Groove Journal Bearing during Start-Up Period

Balint Pap et al.

LUBRICANTS (2018)

添加到收藏夹

Review Engineering, Mechanical

Hydrodynamic lubrication of textured surfaces: A review of modeling techniques and key findings

Daniel Gropper et al.

TRIBOLOGY INTERNATIONAL (2016)

添加到收藏夹

Article Engineering, Mechanical

A New Approach for Studying Cavitation in Lubrication

Andreas Almqvist et al.

JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2014)

添加到收藏夹

Article Engineering, Mechanical

Thermal analysis of microtextured journal bearing using non-Newtonian rheology of lubricant and JFO boundary conditions

S. Kango et al.

TRIBOLOGY INTERNATIONAL (2014)

添加到收藏夹

Article Engineering, Chemical

On the Magnitude of Cavitation Pressure of Steady-State Lubrication

Cong Shen et al.

TRIBOLOGY LETTERS (2013)

添加到收藏夹

Article Engineering, Mechanical

A Laser Surface Textured Journal Bearing

V. Brizmer et al.

JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2012)

添加到收藏夹

Article Engineering, Mechanical

A Modification of the Switch Function in the Elrod Cavitation Algorithm

M. Fesanghary et al.

JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2011)

添加到收藏夹

Article Engineering, Mechanical

A Mass-Conserving Complementarity Formulation to Study Lubricant Films in the Presence of Cavitation

Matteo Giacopini et al.

JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2010)

添加到收藏夹

Article Engineering, Mechanical

Cavitation formation and modelling for fluid film bearings: a review

M. J. Braun et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2010)

添加到收藏夹

Article Engineering, Mechanical

On the Prediction of Cavitation in Dimples Using a Mass-Conservative Algorithm

Y. Qiu et al.

JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2009)

添加到收藏夹

Article Engineering, Mechanical

Computational fluid dynamics analysis of a journal bearing with surface texturing

S. Cupillard et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY (2008)

添加到收藏夹

Article Engineering, Mechanical

The impact of the cavitation model in the analysis of microtextured lubricated journal bearings

Roberto Ausas et al.

JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2007)

添加到收藏夹

Article Engineering, Chemical

An experimental investigation of dimple effect on the stribeck curve of journal bearings

Xiaobin Lu et al.

TRIBOLOGY LETTERS (2007)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.