Influence of surface properties of RO membrane on membrane fouling for treating textile secondary effluent

Reverse osmosis (RO) is a promising technology for treating and reusing textile secondary effluent (SE). To better understand the effect of membrane surface properties on membrane fouling, the performances of three commercial polyamide thin-film composite RO membranes (BW30-4040, CPA2-4040, and RE-4040-FEN) with different roughness and hydrophilicity were investigated for treating textile SE. The RO membranes were characterized by ATR-FTIR, SEM, AFM, and contact angle, respectively. The results showed that the flux increased with an increase in the surface hydrophilicity of membrane. CPA2-4040 had the highest hydrophilic surface and thus the largest initial flux. There was a strong correlation between the membrane fouling and the surface roughness; the fouling increased with an increase in the surface roughness. The roughest surface of CPA2-4040 led to the most significantly flux decline. However, the fouling reversibility was not related directly to surface roughness. BW30-4040 with the secondary roughness and the most hydrophobic surface had the highest fouling reversibility. This was mainly due to the primary hydrophilicity of textile SE in nature. Fluorescence excitation-emission matrix (EEM) showed that hydrophilic neutral protein-like matters and soluble microbial products (SMP) were the main foulants, thus stronger affinity with hydrophilic surface of membrane.