Characteristics of the gas produced during biomass direct gasification in an autothermal pilot-scale bubbling fluidized bed reactor

Direct (air) biomass gasification was demonstrated in a pilot -scale bubbling fluidized bed reactor and the influence of process parameters analyzed. For the operating conditions used, namely equivalence ratio between 0.17 and 0.36 and bed temperature between 700 and 850 degrees C, the process was demonstrated as autothermal and operating under steady-state. The dry gas produced shows the following composition (volumetric basis): 14.0-21.4% CO, 14.2-17.5% CO2, 3.6-5.8% CH4, 1.3-2.4% C2H4, 2.0-12.7% H-2 and 48.9 61.1% N-2. The lower heating value of the dry gas was between 4.4 and 6.9 MJ/Nm3, with the highest values observed during the experiments with lower equivalence ratio. The specific dry gas production was between 1.2 and 2.2 Nm(3)/kg biomass (dry basis), the cold gas efficiency between 41.1 and 62.6% and the carbon conversion efficiency between 60 and 87.5%. The integrated analysis of new data from this study and a survey of published data shows that direct (air) biomass gasification produces gas mixtures with a wide range of variation in characteristics, that can be correlated with the biomass fuel properties and operating conditions used. Therefore, for each type of process application it is required specific experimental information to support an adequate scaling to the industrial scale. (C) 2016 Elsevier Ltd. All rights reserved.