4.2 Article

Heating-induced aggregation control for efficient sequential-cast organic solar cells

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Multidisciplinary

17.1 %-Efficient Eco-Compatible Organic Solar Cells from a Dissymmetric 3D Network Acceptor

Hui Chen et al.

Summary: The performance of polymer solar cells processed by non-halogenated solvents was enhanced by designing and synthesizing a dissymmetric fused-ring acceptor BTIC-2Cl-gamma CF3, achieving a PCE of over 17% and showing significant advantages in storage and photo-stability, while extending the absorption peak to 852 nm.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Article Chemistry, Multidisciplinary

Improving Photovoltaic Performance of Non-Fullerene Polymer Solar Cells Enables by Fine-Tuning Blend Microstructure via Binary Solvent Mixtures

Yue Yu et al.

Summary: This study demonstrates an effective co-solvent blending strategy to improve the molecular organization of a chlorinated small molecule acceptor and phase separation with the corresponding donor, leading to improved photovoltaic performance.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Multidisciplinary Sciences

Pseudo-bilayer architecture enables high-performance organic solar cells with enhanced exciton diffusion length

Kui Jiang et al.

Summary: High-efficiency OSCs with a pseudo-bilayer architecture and optimized ternary system exhibit longer exciton diffusion length and higher power conversion efficiency. The pseudo-bilayer architecture shows excellent potential for future OSC applications.

NATURE COMMUNICATIONS (2021)

Review Chemistry, Physical

A History and Perspective of Non-Fullerene Electron Acceptors for Organic Solar Cells

Ardalan Armin et al.

Summary: Organic solar cells have evolved from relying on fullerenes as acceptors to the emergence of non-fullerene acceptors (NFAs) which have significantly improved cell efficiencies. However, NFAs challenge the traditional understanding of organic solar cell operation, requiring rethinking of morphology, charge generation, and recombination.

ADVANCED ENERGY MATERIALS (2021)

Article Chemistry, Multidisciplinary

Layer-by-Layer Processed Ternary Organic Photovoltaics with Efficiency over 18%

Lingling Zhan et al.

Summary: This study proposes and demonstrates a method to optimize the morphology of the active layer in organic photovoltaic devices by combining the layer-by-layer (LbL) procedure and the ternary strategy. By adding an asymmetric electron acceptor to the binary donor:acceptor host, a vertical phase distribution is formed, leading to improved efficiency in OPV devices.

ADVANCED MATERIALS (2021)

Article Chemistry, Physical

Sequential Deposition of Donor and Acceptor Provides High-Performance Semitransparent Organic Photovoltaics Having a Pseudo p-i-n Active Layer Structure

Hao-Cheng Wang et al.

Summary: A sequential deposition strategy is proposed for achieving semitransparent organic photovoltaics (ST-OPVs) with high efficiency and high transparency. Research shows that the SD devices have higher power conversion efficiency and visible light transmittance values compared to BHJ devices at a given active layer thickness. Therefore, the SD strategy provides a new approach for realizing ST-OPVs with both high efficiency and high transparency.

ADVANCED ENERGY MATERIALS (2021)

Article Chemistry, Applied

Heating induced aggregation in non-fullerene organic solar cells towards high performance

Baocai Du et al.

Summary: The study successfully achieved a maximum efficiency of 13.9% for PBDB-T:m-INPOIC binary OSCs through a heating induced aggregation strategy and thermal annealing treatment, providing a practical method to enhance device performance.

JOURNAL OF ENERGY CHEMISTRY (2021)

Article Nanoscience & Nanotechnology

Fine-Tuning the Dipole Moment of Asymmetric Non-Fullerene Acceptors Enabling Efficient and Stable Organic Solar Cells

Zihao Xia et al.

Summary: The study focuses on the design and synthesis of two novel SMAs, PTIC-4Cl and PT2IC-4Cl, by expanding the conjugation length. Compared to PT2IC-4Cl, PTIC-4Cl exhibits a larger dipole moment and enhanced intermolecular packing, leading to the highest power conversion efficiencies.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Energy & Fuels

Non-fullerene acceptors with branched side chains and improved molecular packing to exceed 18% efficiency in organic solar cells

Chao Li et al.

Summary: The molecular design of acceptor and donor molecules has significantly advanced organic photovoltaics. By introducing branched alkyl chains in non-fullerene acceptors, favorable morphology in the active layer can be achieved, leading to a certified device efficiency of 17.9%. This modification can completely alter the molecular packing behavior of non-fullerene acceptors, resulting in improved structural order and charge transport in thin films.

NATURE ENERGY (2021)

Article Chemistry, Multidisciplinary

High-performance polymer solar cells with efficiency over 18% enabled by asymmetric side chain engineering of non-fullerene acceptors

Shihao Chen et al.

Summary: The research suggests that asymmetric side-chain engineering can effectively tune the properties of non-fullerene small-molecule acceptors (NFSMAs) and improve the power conversion efficiency for binary non-fullerene polymer solar cells (NFPSCs). Introducing proper asymmetric side chains in NFSMAs can induce favorable face-on molecule orientation, enhance carrier mobilities, balance charge transport, and reduce recombination losses, leading to improved overall performance in NFPSCs.

SCIENCE CHINA-CHEMISTRY (2021)

Article Chemistry, Multidisciplinary

A universal method for constructing high efficiency organic solar cells with stacked structures

Yanan Wei et al.

Summary: The study introduces an eco-friendly solvent protection method for high-performance organic solar cells with stacked structures. Results show that this method demonstrates good photovoltaic performance in various systems, and proposes a protective factor to quantitatively evaluate the effectiveness of the method.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Article Materials Science, Multidisciplinary

Synergistic effect of the selenophene-containing central core and the regioisomeric monochlorinated terminals on the molecular packing, crystallinity, film morphology, and photovoltaic performance of selenophene-based nonfullerene acceptors

Gao-Yang Ge et al.

Summary: By synthesizing a pair of regioisomer-free selenophene-containing non-fullerene acceptors, this study demonstrates that adjusting the position of the chlorine atom on INCN can improve molecular packing, crystallinity, and film morphology, leading to enhanced efficiency of photovoltaic devices.

JOURNAL OF MATERIALS CHEMISTRY C (2021)

Article Chemistry, Multidisciplinary

High-Performance Pseudoplanar Heterojunction Ternary Organic Solar Cells with Nonfullerene Alloyed Acceptor

Ji Wan et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Article Chemistry, Multidisciplinary

Single-Junction Organic Photovoltaic Cells with Approaching 18% Efficiency

Yong Cui et al.

ADVANCED MATERIALS (2020)

Article Multidisciplinary Sciences

18% Efficiency organic solar cells

Qishi Liu et al.

SCIENCE BULLETIN (2020)

Article Chemistry, Multidisciplinary

Understanding energetic disorder in electron-deficient-core-based non-fullerene solar cells

Jun Yuan et al.

SCIENCE CHINA-CHEMISTRY (2020)

Article Chemistry, Multidisciplinary

Crystallography, Morphology, Electronic Structure, and Transport in Non-Fullerene/Non-Indacenodithienothiophene Polymer:Y6 Solar Cells

Weigang Zhu et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

Editorial Material Multidisciplinary Sciences

Over 16% efficiency from thick-film organic solar cells

Jianqiang Qin et al.

SCIENCE BULLETIN (2020)

Article Chemistry, Physical

Multi-channel exciton dissociation in D18/Y6 complexes for high-efficiency organic photovoltaics

Zhixing Cao et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Article Chemistry, Physical

Fluorinated solid additives enable high efficiency non-fullerene organic solar cells

Jinlong Cai et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Review Physics, Multidisciplinary

A review of non-fullerene polymer solar cells: from device physics to morphology control

Robert S. Gurney et al.

REPORTS ON PROGRESS IN PHYSICS (2019)

Review Chemistry, Multidisciplinary

Interfacial and Bulk Nanostructures Control Loss of Charges in Organic Solar Cells

Hafiz Bilal Naveed et al.

ACCOUNTS OF CHEMICAL RESEARCH (2019)

Article Chemistry, Multidisciplinary

Retarding the Crystallization of a Nonfullerene Electron Acceptor for High-Performance Polymer Solar Cells

Wei Li et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Article Chemistry, Multidisciplinary

A universal layer-by-layer solution-processing approach for efficient non-fullerene organic solar cells

Rui Sun et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

Review Chemistry, Physical

Organic solar cells based on non-fullerene acceptors

Jianhui Hou et al.

NATURE MATERIALS (2018)

Review Chemistry, Physical

Morphology Control in Organic Solar Cells

Fuwen Zhao et al.

ADVANCED ENERGY MATERIALS (2018)

Article Chemistry, Multidisciplinary

An Electron Acceptor Challenging Fullerenes for Efficient Polymer Solar Cells

Yuze Lin et al.

ADVANCED MATERIALS (2015)

Review Optics

Polymer solar cells

Gang Li et al.

NATURE PHOTONICS (2012)