4.7 Article

Anthracite coal-derived activated carbon as an effectiveness adsorbent for superior gas adsorption and CO2 / N2 and CO2 / CH4 selectivity: Experimental and DFT study

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Environmental

Advanced interpretation of CO2 adsorption thermodynamics onto porous solids by statistical physics formalism

Sarra Wjihi et al.

Summary: The study investigates the CO2 adsorption from simulated flue-gas using three different activated carbons. It shows that micropore volume affects the adsorption capacity, while chemical properties play a secondary role. Advanced models derived from statistical physics are used to interpret the adsorption isotherms and provide insights into the adsorption mechanisms.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Physical

Facile preparation of N-doped activated carbon produced from rice husk for CO2 capture

Song He et al.

Summary: Activated carbons (AC) were prepared using rice husk as feedstock, with surface modification using chitosan as nitrogen source. The nitrogen-doped ACs showed higher adsorption heat and exhibited good adsorption behavior described by the Freundlich model.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Article Chemistry, Multidisciplinary

Mixed-Metal MOF-74 Templated Catalysts for Efficient Carbon Dioxide Capture and Methanation

Timothy Zurrer et al.

Summary: The study successfully dispersed Ni nanoclusters in the parent MOF using NiMg-MOF-74 as a template, and influenced CO2 adsorption capacity and hydrogenation selectivity by controlling the ratio of Ni to Mg during thermal treatment.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Engineering, Chemical

Efficient CO2 Capture by Ultra-high Microporous Activated Carbon Made from Natural Coal

Ouassim Boujibar et al.

Summary: Efficient CO2 capture capabilities were demonstrated in activated carbons prepared from natural coal through simple chemical activation. The activated materials exhibited well-developed porosity, large surface area, and other active elements, contributing to their superior performance. The presence of factors like large surface area, narrow micropores, and oxygenated functional groups on the surface were identified as key contributors to the high efficiency of the activated carbon.

CHEMICAL ENGINEERING & TECHNOLOGY (2021)

Article Energy & Fuels

Highly Efficient Nitrogen-Doped Porous Carbonaceous CO2 Adsorbents Derived from Biomass

Ruixue Pang et al.

Summary: In this study, N-doped porous carbonaceous CO2 sorbents were synthesized using hazelnut shell as raw materials. The materials exhibited high CO2 adsorption capacities, stable recyclability, selectivity, and dynamic capture performance, suggesting a high potential for future applications.

ENERGY & FUELS (2021)

Article Environmental Sciences

Preparation of sludge biochar rich in carboxyl/hydroxyl groups by quenching process and its excellent adsorption performance for Cr(VI)

Baiyan Zeng et al.

Summary: The facile pyrolysis-quenching-reroasting process was used to prepare a sludge-based biochar adsorbent with enhanced adsorption performance for Cr(VI) ions. The quenched biochar (Q-BC) exhibited higher surface area and adsorption capacity compared to unquenched biochar (U-BC), with functional groups such as -COOH and -OH acting as active sites for adsorption. This innovative process provides a new, economical, and effective approach for the preparation of high-performance adsorption materials from municipal sludge.

CHEMOSPHERE (2021)

Article Engineering, Chemical

Multifunctional covalent organic framework (COF)-Based mixed matrix membranes for enhanced CO2 separation

Yutao Liu et al.

Summary: The study proposes a multi-function integration strategy for the design of COF fillers considering overall morphological structure, aperture adjustment, channel decoration, and interface optimization. The COF hollow microsphere with PEG modification on both outer surface and inner channel wall was synthesized and filled into commercial Pebax polymer to fabricate MMMs, resulting in superior CO2/CH4 separation performances.

JOURNAL OF MEMBRANE SCIENCE (2021)

Article Chemistry, Applied

Synthesis and characterization of NaX-type zeolites prepared by different silica and alumina sources and their CO 2 adsorption properties

Somkiat Krachuamram et al.

Summary: By using different silicon and aluminium sources, zeolites with high surface area and pore volume were successfully synthesized. The addition of additives increased the nuclei formation rate and number, resulting in improved CO2 adsorption performance, demonstrating potential for CO2 separation in flue gas.

MICROPOROUS AND MESOPOROUS MATERIALS (2021)

Article Chemistry, Physical

Pore size characterization of micro-mesoporous carbons using CO2 adsorption

Silvio Dantas et al.

Summary: The study introduces a new method for evaluating pore structures in carbon materials, using high-pressure CO2 adsorption isotherms to determine the pore size distribution in both micro- and mesopores. By utilizing Monte Carlo simulations and meso-canonical ensemble methods, capillary condensation transitions in mesopores were successfully predicted, demonstrating the feasibility of the technique in micro-mesoporous carbon materials.

CARBON (2021)

Article Chemistry, Physical

Solvent-free, one-pot synthesis of nitrogen-tailored alkali-activated microporous carbons with an efficient CO2 adsorption

Adeela Rehman et al.

Summary: A series of alkali-activated carbon materials with high specific surface area and large micropore volume were prepared in this study, showing high efficiency in CO2 adsorption. Materials with high basic nitrogen content exhibited the best adsorption performance, and micropore filling is one of the mechanisms for CO2 adsorption.

CARBON (2021)

Article Engineering, Environmental

Nanoporous activated biocarbons with high surface areas from alligator weed and their excellent performance for CO2 capture at both low and high pressures

Gurwinder Singh et al.

Summary: The study demonstrates the preparation of highly efficient nanoporous activated biocarbons (NABs) from alligator weed for carbon dioxide adsorption. The optimized material exhibits high specific surface area and pore volume, with impressive carbon dioxide adsorption capacity at different temperatures and pressures, showing great potential as adsorbents for carbon dioxide.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Physical

Evaluation of different potassium salts as activators for hierarchically porous carbons and their applications in CO2 adsorption

Hongmin Cui et al.

Summary: In this study, porous carbons with large surface area were synthesized using four different potassium salts as activators, achieving a specific surface area of up to 2403 m(2)/g. CO2 adsorption tests revealed that ultramicropores and nitrogen doping play crucial roles in influencing the CO2 uptake performance under different pressure conditions.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Article Engineering, Chemical

High-performance porous carbon-zeolite mixed-matrix membranes for CO2/N2 separation

Chong Yang Chuah et al.

Summary: Nano-sized PS-MFI, ETS-10 and SAPO-34 zeolites were used as CO2-selective fillers in high-performance mixed-matrix carbon molecular sieve membranes for CO2/N-2 separation. The in-house polyimide precursor ODPA-TMPDA was employed for the membranes, leading to improved gas permeability. Zeolite-filled CMSMs showed enhanced CO2 permeability and selectivity, especially with SAPO-34 outperforming the Robeson upper bound for CO2/N-2 separation.

JOURNAL OF MEMBRANE SCIENCE (2021)

Article Chemistry, Applied

Graphene-based semi-coke porous carbon with N-rich hierarchical sandwich-like structure for efficient separation of CO2/N2

Hailong Ning et al.

Summary: A new strategy for preparing graphene-based semi-coke porous carbon with nitrogen-rich layered sandwich structure has been proposed, demonstrating excellent CO2 adsorption capacity and selectivity. The introduction of secondary amino acids greatly improved the CO2/N2 selectivity and achieved outstanding separation selectivity. The strategy also showed outstanding cycle regeneration ability, providing a new idea for the commercial application and development of porous carbon.

MICROPOROUS AND MESOPOROUS MATERIALS (2021)

Article Engineering, Environmental

Development of a novel switched packed bed process for cryogenic CO2 capture from natural gas

Muhammad Babar et al.

Summary: A novel cryogenic packed bed system was proposed for continuous CO2 capture from natural gas, with the feasibility of the switching concept confirmed through dynamic simulation and experimental study. Increasing CO2 content reduces switching and saturation time in the cryogenic packed bed, with a switching time of 200 seconds achieving over 98% CO2 recovery.

PROCESS SAFETY AND ENVIRONMENTAL PROTECTION (2021)

Article Environmental Sciences

Efficient nitrogen doped porous carbonaceous CO2 adsorbents based on lotus leaf

Qian Li et al.

Summary: In this study, waste biomass lotus leaf was converted into N-doped porous carbonaceous CO2 adsorbents with high nitrogen content and advanced porous structure. The sorbents exhibited excellent CO2 adsorption abilities, highlighting the significant potential of using waste plant resources for sustainable CO2 capture and other applications.

JOURNAL OF ENVIRONMENTAL SCIENCES (2021)

Article Chemistry, Multidisciplinary

Synthesis and characterization of biomass-derived surface-modified activated carbon for enhanced CO2 adsorption

Azeem Sarwar et al.

Summary: In this study, activated carbon based adsorbents were synthesized from hydro-char through modified hydrothermal carbonization and thermochemical activation methods, exhibiting high specific surface area and microporous volume with notable CO2 adsorption capacity. The experimental data fit various adsorption isotherm models, and the adsorption of CO2 was found to be spontaneous and exothermic on the adsorbent.

JOURNAL OF CO2 UTILIZATION (2021)

Article Engineering, Environmental

Preparation of fiber-like nanoporous carbon from jute thread waste for superior CO2 and H2S removal from natural gas: Experimental and DFT study

Raziyeh Ahmadi et al.

Summary: The novel N-S rich nanoporous carbon based on jute thread waste showed high adsorption capacity for CO2 and H2S, with excellent performance under varying pressures. The presence of Pyrrolic-N atoms in the pores significantly influenced gas adsorption, while the addition of S atoms altered the adsorption mechanisms, showcasing the potential of these nanoadsorbents for large-scale natural gas purification.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Environmental Sciences

High-efficiency adsorption of Cr(VI) and RhB by hierarchical porous carbon prepared from coal gangue

Jinxiong Wu et al.

Summary: The study showed that the hierarchical porous carbon (HPC) adsorbent prepared by a two-step method exhibited excellent adsorption performance for Cr(VI) and RhB, with a specific surface area of up to 2012.7 m(2) g(-1) and adsorption capacities of 320.51 and 3086.42 mg g(-1) for Cr(VI) and RhB, respectively.

CHEMOSPHERE (2021)

Article Engineering, Chemical

Oxidative desulfurization of a model liquid fuel over an rGO-supported transition metal modified WO3 catalyst: Experimental and theoretical studies

Saeed Hasannia et al.

Summary: The study demonstrated that XW/rGO compounds can be used as catalysts in oxidative desulfurization process, effectively reducing the DBT content in liquid model fuel under optimized conditions. Results also suggested that impurities can impact the charge transfer at the XW/rGO interface.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Article Chemistry, Multidisciplinary

Preparation of Nitrogen-Doped Cellulose-Based Porous Carbon and Its Carbon Dioxide Adsorption Properties

Yifan Tan et al.

Summary: Nitrogen-doped cellulose-based porous carbon materials were successfully prepared via hydrothermal method and KOH chemical activation with melamine as a nitrogen-doping precursor. The effects of hydrothermal temperature on the microstructure and surface morphology of the products were investigated, along with the carbon dioxide adsorption capacity. The optimized porous carbon exhibited excellent CO2 adsorption performance, which followed the Freundlich isotherm model.

ACS OMEGA (2021)

Article Chemistry, Multidisciplinary

Novel nitrogen-doped KFeS2/C composites for the efficient removal of Cr(vi)

Qiaohong Su et al.

Summary: A novel nitrogen-doped KFeS2/C composite was prepared for efficient removal of Cr(vi) from aqueous solutions, with the removal mechanism involving adsorption and redox reactions. XPS analysis and DFT simulations confirmed the effectiveness of the composite material in removing highly toxic Cr(vi).

ENVIRONMENTAL SCIENCE-NANO (2021)

Article Green & Sustainable Science & Technology

Improving CO2/CH4 and CO2/N2 adsorptive selectivity of Cu-BTC and MOF-derived nanoporous carbon by modification with nitrogen-containing groups

Samira Salehi et al.

ENVIRONMENTAL PROGRESS & SUSTAINABLE ENERGY (2020)

Article Energy & Fuels

Nitrogen-doping activated biomass carbon from tea seed shell for CO2 capture and supercapacitor

Cui Quan et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2020)

Article Chemistry, Multidisciplinary

Ultrahigh-CO2 Adsorption Capacity and CO2/N2 Selectivity by Nitrogen-Doped Porous Activated Carbon Monolith

Akram A. Alabadi et al.

BULLETIN OF THE CHEMICAL SOCIETY OF JAPAN (2020)

Article Engineering, Environmental

Porous activated carbons derived from waste sugarcane bagasse for CO2 adsorption

Yafei Guo et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Engineering, Chemical

Porous Carbons Derived from Sustainable Biomass via a Facile One-Step Synthesis Strategy as Efficient CO2 Adsorbents

Pupu Yang et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2020)

Article Engineering, Environmental

Rapid, simple and sustainable synthesis of ultra-microporous carbons with high performance for CO2 uptake, via microwave heating

Gabriela Duran-Jimenez et al.

CHEMICAL ENGINEERING JOURNAL (2020)

Article Materials Science, Multidisciplinary

Deep insight into the pore size distribution of N-doped porous carbon materials on electrochemical energy storage and CO2 sorption

Jiaxin Li et al.

DIAMOND AND RELATED MATERIALS (2020)

Article Engineering, Chemical

Structured Zeolite Monoliths with Ultrathin Framework for Fast CO2 Adsorption Enabled by 3D Printing

Hemin Zhang et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2020)

Article Green & Sustainable Science & Technology

Effective synthesis route of renewable nanoporous carbon adsorbent for high energy gas storage and CO2/N2 selectivity

Minji Jung et al.

RENEWABLE ENERGY (2020)

Article Engineering, Chemical

Preparation of biomass-derived porous carbons by a facile method and application to CO2 adsorption

Qian Li et al.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2020)

Article Engineering, Environmental

Novel asphaltene-derived nanoporous carbon with N-S-rich micro-mesoporous structure for superior gas adsorption: Experimental and DFT study

Neda Haj Mohammad Hossein Tehrani et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Article Engineering, Chemical

Novel Nitrogen-Doped Porous Carbons Derived from Graphene for Effective CO2 Capture

Liying An et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2019)

Article Engineering, Environmental

Highly efficient SO3Ag-functionalized MIL-101(Cr) for adsorptive desulfurization of the gas stream: Experimental and DFT study

Alimohammad Pourreza et al.

CHEMICAL ENGINEERING JOURNAL (2019)

Review Engineering, Environmental

A review of gas hydrate growth kinetic models

Zhenyuan Yin et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Article Engineering, Environmental

Synthesis and adsorption performance of a modified micro-mesoporous MIL-101(Cr) for VOCs removal at ambient conditions

Marziye Shafiei et al.

CHEMICAL ENGINEERING JOURNAL (2018)

Article Chemistry, Physical

Adsorption and growth of palladium clusters on graphdiyne

A. Seif et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2017)

Article Chemistry, Multidisciplinary

Charge-controlled switchable methane adsorption on heteroatom-doped BNNSs

Abdolvahab Seif et al.

RSC ADVANCES (2016)

Article Chemistry, Multidisciplinary

A new strategy for hydrogen storage using BNNS: simultaneous effects of doping and charge modulation

Abdolvahab Seif et al.

RSC ADVANCES (2016)

Article Engineering, Environmental

Highly porous activated carbon materials from carbonized biomass with high CO2 capturing capacity

Akram Alabadi et al.

CHEMICAL ENGINEERING JOURNAL (2015)

Article Chemistry, Physical

High-performance super capacitors based on activated anthracite with controlled porosity

Hyun-Chul Lee et al.

JOURNAL OF POWER SOURCES (2015)

Article Chemistry, Physical

Methane storage on aluminum-doped single wall BNNTs

Khaled Azizi et al.

APPLIED SURFACE SCIENCE (2014)

Article Engineering, Chemical

Screening CO2/N2 selectivity in metal-organic frameworks using Monte Carlo simulations and ideal adsorbed solution theory

Allison N. Dickey et al.

CANADIAN JOURNAL OF CHEMICAL ENGINEERING (2012)

Article Green & Sustainable Science & Technology

Feasibility of integrating solar energy into a power plant with amine-based chemical absorption for CO2 capture

Hailong Li et al.

INTERNATIONAL JOURNAL OF GREENHOUSE GAS CONTROL (2012)

Article Chemistry, Multidisciplinary

N-Doped Polypyrrole-Based Porous Carbons for CO2 Capture

Marta Sevilla et al.

ADVANCED FUNCTIONAL MATERIALS (2011)

Article Chemistry, Applied

Interaction of CO, CO2 and CH4 with mesoporous organosilica: Periodic DFT calculations with dispersion corrections

Umberto Martinez et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2010)

Article Materials Science, Multidisciplinary

Regulation of pore size distribution in coal-based activated carbon

Gong Guo-zhuo et al.

NEW CARBON MATERIALS (2009)

Article Chemistry, Multidisciplinary

Dramatic tuning of carbon dioxide uptake via metal substitution in a coordination polymer with cylindrical pores

Stephen R. Caskey et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2008)