相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Characterization of material strain and thermal softening effects in the cutting process
Dong Zhang et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2021)
A Comprehensive Experiment-Based Approach to Generate Stress Field and Slip Lines in Cutting Process
Zheng-Yan Yang et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2021)
A novel approach to determine the velocity dependency of the friction behavior during machining by means of digital particle image velocimetry (DPIV)
Berend Denkena et al.
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2021)
Determination of chip speed and shear strain rate in primary shear zone using digital image correlation (DIC) in linear-orthogonal cutting experiments
Benedikt Thimm et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)
Chip Formation Mechanism of Inconel 718: A Review of Models and Approaches
Chun Liu et al.
CHINESE JOURNAL OF MECHANICAL ENGINEERING (2021)
Measurement of plastic strain and plastic strain rate during orthogonal cutting for Ti-6Al-4V
A. Sela et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)
Cutting edge microgeometries in metal cutting: a review
Kejia Zhuang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)
Digital image correlation analysis and modelling of the strain rate in metal cutting
Thomas Bergs et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2021)
Development and validation of a new friction model for cutting processes
Bingxiao Peng et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Cutting temperature prediction in negative-rake-angle machining with chamfered insert based on a modified slip-line field model
Cheng Hu et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)
Thermomechanical coupling investigation in Ti-6Al-4V orthogonal cutting: Experimental and numerical confrontation
M. Harzallah et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)
In Situ Analysis of Deformation Mechanics of Constrained Cutting Toward Enhanced Material Removal
Yang Guo et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2020)
Plastic Strain Threshold Determination for White Layer Formation in Hard Turning of AISI 52100 Steel Using Micro-Grid Technique and Finite Element Simulations
Guang-Chao Nie et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2020)
In situ analysis of shear bands and boundary layer formation in metals
Shwetabh Yadav et al.
PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2020)
Crystal anisotropy-dependent shear angle variation in orthogonal cutting of single crystalline copper
Zhanfeng Wang et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2020)
Digital Image Correlation Based on Primary Shear Band Model for Reconstructing Displacement, Strain, and Stress Fields in Orthogonal Cutting
Yang Huang et al.
IEEE-ASME TRANSACTIONS ON MECHATRONICS (2020)
Multiscale simulation of grain refinement induced by dynamic recrystallization of Ti6Al4V alloy during high speed machining
Xiang Xu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)
Crystal plasticity finite element modeling and simulation of diamond cutting of polycrystalline copper
Zhanfeng Wang et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
New In Situ Imaging-Based Methodology to Identify the Material Constitutive Model Coefficients in Metal Cutting Process
Xiao-Ming Zhang et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2019)
Analysis and constitutive modeling of high strain rate deformation behavior of Haynes 282 aerospace superalloy
Nnaemeka Emmanuel Ugodilinwa et al.
MATERIALS TODAY COMMUNICATIONS (2019)
New observations on built-up edge structures for improving machining performance during the cutting of superduplex stainless steel
Yassmin Seid Ahmed et al.
TRIBOLOGY INTERNATIONAL (2019)
Simulated and experimental analysis on serrated chip formation for hard milling process
Binxun Li et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Using Digital Image Correlation Measurements for the Inverse Identification of Constitutive Material Parameters applied in Metal Cutting Simulations
B. Thimm et al.
17TH CIRP CONFERENCE ON MODELLING OF MACHINING OPERATIONS (17TH CIRP CMMO) (2019)
Validation of the slip-line model for serrated chip formation in orthogonal turning under dry and MQL conditions
Alper Uysal et al.
17TH CIRP CONFERENCE ON MODELLING OF MACHINING OPERATIONS (17TH CIRP CMMO) (2019)
Development of a 3D hybrid modeling of residual stresses induced by grooving
G. Methon et al.
17TH CIRP CONFERENCE ON MODELLING OF MACHINING OPERATIONS (17TH CIRP CMMO) (2019)
Analytical Model for Prediction of Residual Stress in Dynamic Orthogonal Cutting Process
Xin-Da Huang et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2018)
Chip Morphology and Chip Formation Mechanisms During Machining of ECAE-Processed Titanium
Brian Davis et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2018)
Toward a new tribological approach to predict cutting tool wear
J. Rech et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2018)
A coupled in-situ measurement of temperature and kinematic fields in Ti6A1-4V serrated chip formation at micro-scale
M. Harzallah et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2018)
Study of the Shear Strain and Shear Strain Rate Progression During Titanium Machining
Brian Davis et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2018)
Hybrid Digital Image Correlation-Finite Element Modeling Approach for Modeling of Orthogonal Cutting Process
Dong Zhang et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2018)
Material-Independent Mechanochemical Effect in the Deformation of Highly-Strain-Hardening Metals
Anirudh Udupa et al.
PHYSICAL REVIEW APPLIED (2018)
Stress Field Analysis in Orthogonal Cutting Process Using Digital Image Correlation Technique
Dong Zhang et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2017)
Kinematic Field Measurements During Orthogonal Cutting Tests via DIC with Double-frame Camera and Pulsed Laser Lighting
T. Baizeau et al.
EXPERIMENTAL MECHANICS (2017)
Subsurface Deformation Generated by Orthogonal Cutting: Analytical Modeling and Experimental Verification
Dong Zhang et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2017)
High-Speed Photography and Digital Optical Measurement Techniques for Geomaterials: Fundamentals and Applications
H. Z. Xing et al.
ROCK MECHANICS AND ROCK ENGINEERING (2017)
Advances in material and friction data for modelling of metal machining
Shreyes N. Melkote et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2017)
Experimental study of strain field evolution during milling process
Dong Zhang et al.
16TH CIRP CONFERENCE ON MODELLING OF MACHINING OPERATIONS (16TH CIRP CMMO) (2017)
Prediction of surface integrity using Flamant-Boussinesq analytical model
Thomas Baizeau et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2016)
A novel relaxation-free analytical method for prediction of residual stress induced by mechanical load during orthogonal machining
Xin-Da Huang et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2016)
Cutting force sensor based on digital image correlation for segmented chip formation analysis
Thomas Baizeau et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
A REVIEW OF SURFACE DEFORMATION AND STRAIN MEASUREMENT USING TWO-DIMENSIONAL DIGITAL IMAGE CORRELATION
Sze-Wei Khoo et al.
METROLOGY AND MEASUREMENT SYSTEMS (2016)
Numerical modeling of residual stresses in turning of a 27MnCr5 steel
Frederic Valiorgue et al.
3RD CIRP CONFERENCE ON SURFACE INTEGRITY (2016)
Experimental and numerical assessment of subsurface plastic deformation induced by OFHC copper machining
J. C. Outeiro et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2015)
Ncorr: Open-Source 2D Digital Image Correlation Matlab Software
J. Blaber et al.
EXPERIMENTAL MECHANICS (2015)
Evaluation of Present Numerical Models for Predicting Metal Cutting Performance And Residual Stresses
Jose Carlos Outeiro et al.
MACHINING SCIENCE AND TECHNOLOGY (2015)
Some practical considerations in finite element-based digital image correlation
Bo Wang et al.
OPTICS AND LASERS IN ENGINEERING (2015)
In situ analysis of flow dynamics and deformation fields in cutting and sliding of metals
Yang Guo et al.
PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2015)
Quantitative In Situ Analysis of Deformation in Sliding Metals: Effect of Initial Strain State
Anirban Mahato et al.
TRIBOLOGY LETTERS (2015)
Inverse Determination of Constitutive Equations and Cutting Force Modelling for Complex Tools Using Oxley's Predictive Machining Theory
B. Denkena et al.
15TH CIRP CONFERENCE ON MODELLING OF MACHINING OPERATIONS (15TH CMMO) (2015)
Effect of rake angle on strain field during orthogonal cutting of hardened steel with c-BN tools
Thomas Baizeau et al.
15TH CIRP CONFERENCE ON MODELLING OF MACHINING OPERATIONS (15TH CMMO) (2015)
Evaluation of Ductile Fracture Models in Finite Element Simulation of Metal Cutting Processes
Jian Liu et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2014)
Characterisation of friction and heat partition coefficients at the tool-work material interface in cutting
J. Rech et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2013)
Modeling of white layer thickness in high speed machining of hardened steel based on phase transformation mechanism
Chunzheng Duan et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Strain, strain rate and velocity fields determination at very high cutting speed
G. List et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)
Multi-physics modeling and simulations of surface microstructure alteration in hard turning
Hongtao Ding et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2013)
Mechanics-aided digital image correlation
Zvonimir Tomicevc et al.
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN (2013)
Comparison of Local and Global Approaches to Digital Image Correlation
F. Hild et al.
EXPERIMENTAL MECHANICS (2012)
3D modeling of residual stresses induced in finish turning of an AISI304L stainless steel
Frederic Valiorgue et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2012)
Improvement of orthogonal cutting simulation with a nonlocal damage model
A. Shams et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2012)
Hybrid model for the prediction of residual stresses induced by 15-5PH steel turning
Alexandre Mondelin et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2012)
Chip Flow and Scaling Laws in High Speed Metal Cutting
Guy Sutter et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2012)
Mesoscale Folding, Instability, and Disruption of Laminar Flow in Metal Surfaces
Narayan K. Sundaram et al.
PHYSICAL REVIEW LETTERS (2012)
Deformation field in large-strain extrusion machining and implications for deformation processing
Y. Guo et al.
SCRIPTA MATERIALIA (2012)
A new experimental methodology to analyse the friction behaviour at the tool-chip interface in metal cutting
Hendrik Puls et al.
PRODUCTION ENGINEERING-RESEARCH AND DEVELOPMENT (2012)
Controlling deformation and microstructure on machined surfaces
Yang Guo et al.
ACTA MATERIALIA (2011)
Control of deformation levels on machined surfaces
Y. Guo et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2011)
High speed PIV applied to aerodynamic noise investigation
V. Koschatzky et al.
EXPERIMENTS IN FLUIDS (2011)
Slip-line field model of micro-cutting process with round tool edge effect
Xiaoliang Jin et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)
Contact Conditions at the Chip-Tool Interface in Machining
Jihong Hwang et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2011)
A Novel Subset Splitting Procedure for Digital Image Correlation on Discontinuous Displacement Fields
J. Poissant et al.
EXPERIMENTAL MECHANICS (2010)
Identification of Material Constitutive Laws for Machining-Part I: An Analytical Model Describing the Stress, Strain, Strain Rate, and Temperature Fields in the Primary Shear Zone in Orthogonal Metal Cutting
Bin Shi et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2010)
An introduction to high speed photography and photonics
P. W. W. Fuller
IMAGING SCIENCE JOURNAL (2009)
Extension of Oxley's predictive machining theory for Johnson and Cook flow stress model
D. I. Lalwani et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Two-dimensional digital image correlation for in-plane displacement and strain measurement: a review
Bing Pan et al.
MEASUREMENT SCIENCE AND TECHNOLOGY (2009)
Controlling gradation of surface strains and nanostructuring by large-strain machining
R. Calistes et al.
SCRIPTA MATERIALIA (2009)
An extended and integrated digital image correlation technique applied to the analysis of fractured samples
Julien Rethore et al.
EUROPEAN JOURNAL OF COMPUTATIONAL MECHANICS (2009)
Mechanics of high speed cutting with curvilinear edge tools
Yigit Karpat et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2008)
Determination of micro-scale plastic strain caused by orthogonal cutting
H. Ghadbelgi et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2008)
Analytical and thermal modeling of high-speed machining with chamfered tools
Yigit Karpat et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2008)
In-process high-speed photography applied to orthogonal turning
J. Pujana et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
The application of high-speed digital image correlation
P. L. Reu et al.
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN (2008)
A novel ultra-high speed camera for digital image processing applications
A. Hijazi et al.
MEASUREMENT SCIENCE AND TECHNOLOGY (2008)
Study on subset size selection in digital image correlation for speckle patterns
Bing Pan et al.
OPTICS EXPRESS (2008)
In vitro blood flow in a rectangular PDMS microchannel:: experimental observations using a confocal micro-PIV system
Rui Lima et al.
BIOMEDICAL MICRODEVICES (2008)
Global and local coordinates in digital image correlation
Wei Sun et al.
APPLIED OPTICS (2007)
Residual stress modeling in orthogonal machining
S. Y. Liang et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2007)
Finite-Element displacement fields analysis from digital images: Application to portevin-le chatelier bands
G. Besnard et al.
EXPERIMENTAL MECHANICS (2006)
Large strain deformation field in machining
Seongeyl Lee et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2006)
Numerical experiments on the influence of material and other variables on plane strain continuous chip formation in metal machining
THC Childs
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2006)
Finite element formulation for a digital image correlation method
YF Sun et al.
APPLIED OPTICS (2005)
A PIV study of hydrodynamics in gas-liquid high throughput experimentation (HTE) reactors with eccentric impeller configurations
JR Hall et al.
CHEMICAL ENGINEERING SCIENCE (2005)
Chip geometries during high-speed machining for orthogonal cutting conditions
G Sutter
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2005)
A FEM study on mechanisms of discontinuous chip formation in hard machining
YB Guo et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
Analytical prediction of the chip rack-flow angle in machining with restricted contact grooved tools
N Fang et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2003)
Slip-line modeling of machining with a rounded-edge tool - Part I: new model and theory
N Fang
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2003)
Slip-line modeling of machining with a rounded-edge tool - Part II: analysis of the size effect and the shear strain-rate
N Fang
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2003)
From the basic mechanics of orthogonal metal cutting toward the identification of the constitutive equation
N Tounsi et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2002)
Direct observations of the chip-tool interface in the low speed cutting of pure metals
V Madhavan et al.
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME (2002)
Friction and wear testing of multilayer coatings on carbide substrates for dry machining applications
W Grzesik et al.
SURFACE & COATINGS TECHNOLOGY (2002)
Material behaviour in metal cutting: strains, strain rates and temperatures in chip formation
SPFC Jaspers et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2002)
An analytical predictive model and experimental validation for machining with groovedtools incorporating the effects of strains, strain-rates, and temperatures
N Fang et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2002)
Mechanics of machining with chamfered tools
T Ren et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2000)