☆ 4.6 Article

18.42% efficiency polymer solar cells enabled by terpolymer donors with optimal miscibility and energy levels

JOURNAL OF MATERIALS CHEMISTRY A (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Multidisciplinary

Chlorination Enabling a Low-Cost Benzodithiophene-Based Wide-Bandgap Donor Polymer with an Efficiency of over 17%

Hang Wang et al.

Summary: Three regioregular benzodithiophene-based donor-donor (D-D)-type polymers were designed, synthesized, and used in organic solar cells (OSCs), with one of them, PBDTT1Cl, demonstrating superior performance in terms of power conversion efficiency, charge mobility, and nonradiative energy loss.

ADVANCED MATERIALS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Optimized Active Layer Morphologies via Ternary Copolymerization of Polymer Donors for 17.6 % Efficiency Organic Solar cells with Enhanced Fill Factor

Xia Guo et al.

Summary: In this study, a ternary copolymerization approach was used to develop a new terpolymer donor PM6-Tz20 with improved active layer morphology, leading to enhanced PCE in OSCs. By replacing Al with Ag as the cathode, the champion PCE was further improved, demonstrating the effectiveness of molecular design strategy in optimizing OSC performance.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Volatilizable Solid Additive-Assisted Treatment Enables Organic Solar Cells with Efficiency over 18.8% and Fill Factor Exceeding 80%

Sunan Bao et al.

Summary: Controlling the self-assembly of organic semiconductors to form well-developed nanoscale phase separation is critical for building high-performance organic solar cells. A new approach utilizing the synergistic effect of DTT and CN is developed to tune the morphology of the photoactive layer, leading to a significant increase in power-conversion efficiency and fill factor in ternary OSCs processed with dual additives of CN and DTT.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Efficient, Thermally Stable, and Mechanically Robust All-Polymer Solar Cells Consisting of the Same Benzodithiophene Unit-Based Polymer Acceptor and Donor with High Molecular Compatibility

Jin-Woo Lee et al.

Summary: Researchers have developed a series of polymer acceptors based on non-fullerene small molecule acceptors, which show enhanced compatibility and performance when blended with high-performance polymer donors.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Article Engineering, Chemical

Block copolymers as efficient cathode interlayer materials for organic solar cells

Dingqin Hu et al.

Summary: This study introduces block copolymers with well-controlled chemical composition and molecular weight for cathode interlayer applications in organic solar cells, showing higher power conversion efficiency and better stability compared to the widely-applied ZnO counterparts. The block copolymer thin film has abundant conductive channels and excellent longitudinal electron conductivity, forming interpenetrating networks for improved performance. No post-treatment is needed for the block copolymer based cathode interlayer, ensuring excellent processability.

FRONTIERS OF CHEMICAL SCIENCE AND ENGINEERING (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

15.3% Efficiency All-Small-Molecule Organic Solar Cells Achieved by a Locally Asymmetric F, Cl Disubstitution Strategy

Dingqin Hu et al.

Summary: A new asymmetric acceptor, BTP-FCl-FCl, was designed and synthesized to achieve a record efficiency of 15.3% for single-junction binary ASM organic solar cells by matching with a high-performance small molecule donor. The locally asymmetric structure of BTP-FCl-FCl resulted in improved charge generation and extraction, contributing to the enhanced performance of the devices.

ADVANCED SCIENCE (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Configurational Isomers Induced Significant Difference in All-Polymer Solar Cells

Hengtao Wang et al.

Summary: The design and synthesis of polymer acceptors play a crucial role in the performance of all-polymer solar cells. By separating and controlling the monomer configuration, two isomeric polymeric acceptors were produced, with the gamma-based polymer showing the highest power conversion efficiency. The results demonstrate that configurational control is a promising strategy for achieving high-performance polymer acceptors.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Quinoxaline-Based D-A Copolymer Donor Achieving 17.62% Efficiency of Organic Solar Cells

Can Zhu et al.

Summary: Side-chain engineering is a crucial strategy for enhancing the power conversion efficiency of organic solar cells. In this study, two copolymers were designed and synthesized, with PBQ6 exhibiting superior performance and achieving a high efficiency of 17.62% for organic solar cells.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Energy & Fuels

Non-fullerene acceptors with branched side chains and improved molecular packing to exceed 18% efficiency in organic solar cells

Chao Li et al.

Summary: The molecular design of acceptor and donor molecules has significantly advanced organic photovoltaics. By introducing branched alkyl chains in non-fullerene acceptors, favorable morphology in the active layer can be achieved, leading to a certified device efficiency of 17.9%. This modification can completely alter the molecular packing behavior of non-fullerene acceptors, resulting in improved structural order and charge transport in thin films.

NATURE ENERGY (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Regioregular Narrow-Bandgap n-Type Polymers with High Electron Mobility Enabling Highly Efficient All-Polymer Solar Cells

Huiliang Sun et al.

Summary: The study successfully improved the efficiency of all-polymer solar cells by synthesizing narrow-bandgap polymer acceptors with regular structures. By introducing a ternary system with different components, further optimization of blend morphology and charge transport was achieved, leading to an enhanced power conversion efficiency.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Single-Junction Organic Photovoltaic Cell with 19% Efficiency

Yong Cui et al.

Summary: By combining material design and ternary blending strategy, a maximum power conversion efficiency of 19.0% is achieved in single-junction OPV cells. Optimized active layer structure significantly improves the photovoltaic parameters, enhancing the performance and PCE values of the cells.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Manipulating the solubility properties of polymer donors for high-performance layer-by-layer processed organic solar cells

Haijun Ning et al.

Summary: This study presents an effective method to develop high-performance polymer donors for layer-by-layer processed organic solar cells (LBL-OSCs) by manipulating their solubility properties, leading to improved efficiency and reproducibility. The research demonstrates that the solubility property of a polymer significantly impacts electron acceptor penetration, phase separation, and photovoltaic performance of LBL-OSCs.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

High-efficiency organic solar cells with low voltage loss induced by solvent additive strategy

Jiali Song et al.

Summary: The use of a solvent additive strategy with diiodomethane (DIM) instead of 1,8-diiodooctane (DIO) has been effective in reducing high voltage loss (V-loss) in organic solar cells (OSCs), leading to improved power conversion efficiency (PCE) and open-circuit voltage (V-oc). The approach has also been successfully applied to different blends, achieving high PCEs with reduced V-loss.

MATTER (2021)

添加到收藏夹

Article Chemistry, Physical

Structural similarity induced improvement in the performance of organic solar cells based on novel terpolymer donors†

Yujun Cheng et al.

Summary: This study reports the construction of terpolymers by introducing Si and Cl functionalized benzodithiophene (BDT-SiCl) and F functionalized benzodithiophene (BDT-2F) through random copolymerization, with the structural similarity between the two units helping to minimize disturbance, improve charge transport, and broaden light absorption. The terpolymer-based OSCs achieve the best efficiency of 16.22% and have overall improved device parameters compared to PM6-based devices, demonstrating the promising strategy of structural similarity in constructing terpolymers for high-performance OSCs.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Benzo[1,2-b:4,5-c′]Dithiophene-4,8-Dione-Based Polymer Donor Achieving an Efficiency Over 16%

Pengjie Chao et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Subtle Molecular Tailoring Induces Significant Morphology Optimization Enabling over 16% Efficiency Organic Solar Cells with Efficient Charge Generation

Zichun Zhou et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Improving open-circuit voltage by a chlorinated polymer donor endows binary organic solar cells efficiencies over 17%

Ruijie Ma et al.

SCIENCE CHINA-CHEMISTRY (2020)

添加到收藏夹

Article Chemistry, Physical

Accurate Determination of the Minimum HOMO Offset for Efficient Charge Generation using Organic Semiconducting Alloys

Jianyun Zhang et al.

ADVANCED ENERGY MATERIALS (2020)

添加到收藏夹

Article Multidisciplinary Sciences

18% Efficiency organic solar cells

Qishi Liu et al.

SCIENCE BULLETIN (2020)

添加到收藏夹

Editorial Material Multidisciplinary Sciences

A 2.16 eV bandgap polymer donor gives 16% power conversion efficiency

Tan Wang et al.

SCIENCE BULLETIN (2020)

添加到收藏夹

Article Chemistry, Physical

New Phase for Organic Solar Cell Research: Emergence of Y-Series Electron Acceptors and Their Perspectives

Shuixing Li et al.

ACS ENERGY LETTERS (2020)

添加到收藏夹

Article Chemistry, Physical

Tailoring Regioisomeric Structures of π-Conjugated Polymers Containing Monofluorinated π-Bridges for Highly Efficient Polymer Solar Cells

Baobing Fan et al.

ACS ENERGY LETTERS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Importance of Optimal Crystallinity and Hole Mobility of BDT-Based Polymer Donor for Simultaneous Enhancements ofVoc,Jsc, and FF in Efficient Nonfullerene Organic Solar Cells

Jin Su Park et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

On the recombination order of surface recombination under open circuit conditions

Joachim Vollbrecht et al.

ORGANIC ELECTRONICS (2020)

添加到收藏夹

Article Chemistry, Physical

Phthalimide Polymer Donor Guests Enable over 17% Efficient Organic Solar Cells via Parallel-Like Ternary and Quaternary Strategies

Weichao Zhang et al.

ADVANCED ENERGY MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

Delicate Morphology Control Triggers 14.7% Efficiency All-Small-Molecule Organic Solar Cells

Hua Tang et al.

ADVANCED ENERGY MATERIALS (2020)

添加到收藏夹

Article Polymer Science

Thiazole-Functionalized Terpolymer Donors Obtained via Random Ternary Copolymerization for High-Performance Polymer Solar Cells

Zhihui Liao et al.

MACROMOLECULES (2020)

添加到收藏夹

Article Energy & Fuels

Polymer solar cell based on ternary active layer consists of medium bandgap polymer and two non-fullerene acceptors

Ganesh D. Sharma et al.

SOLAR ENERGY (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Random terpolymer based on thiophene-thiazolothiazole unit enabling efficient non-fullerene organic solar cells

Jingnan Wu et al.

NATURE COMMUNICATIONS (2020)

添加到收藏夹

Article Physics, Condensed Matter

Small molecule donors with different conjugated π linking bridges: Synthesis and photovoltaic properties

Xiyue Dong et al.

JOURNAL OF SEMICONDUCTORS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Two compatible polymer donors contribute synergistically for ternary organic solar cells with 17.53% efficiency

Qiaoshi An et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Thermodynamic Properties and Molecular Packing Explain Performance and Processing Procedures of Three D18:NFA Organic Solar Cells

Zhen Wang et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

15.34% efficiency all-small-molecule organic solar cells with an improved fill factor enabled by a fullerene additive

Dingqin Hu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

14.7% Efficiency Organic Photovoltaic Cells Enabled by Active Materials with a Large Electrostatic Potential Difference

Huifeng Yao et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Single-Junction Polymer Solar Cells with 16.35% Efficiency Enabled by a Platinum(II) Complexation Strategy

Xiaopeng Xu et al.

ADVANCED MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Alkyl Chain Length Effects of Polymer Donors on the Morphology and Device Performance of Polymer Solar Cells with Different Acceptors

Shuting Pang et al.

ADVANCED ENERGY MATERIALS (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Dielectric disorder in two-dimensional materials

Archana Raja et al.

NATURE NANOTECHNOLOGY (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Donor Derivative Incorporation: An Effective Strategy toward High Performance All-Small-Molecule Ternary Organic Solar Cells

Hua Tang et al.

ADVANCED SCIENCE (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Fluorobenzotriazole (FTAZ)-Based Polymer Donor Enables Organic Solar Cells Exceeding 12% Efficiency

Zhihui Liao et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

A monothiophene unit incorporating both fluoro and ester substitution enabling high-performance donor polymers for non-fullerene solar cells with 16.4% efficiency

Huiliang Sun et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

添加到收藏夹

Article Chemistry, Physical

Single-Junction Organic Solar Cell with over 15% Efficiency Using Fused-Ring Acceptor with Electron-Deficient Core

Jun Yuan et al.

JOULE (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Critical Role of Vertical Phase Separation in Small-Molecule Organic Solar Cells

Jin Fang et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Dye-Incorporated Polynaphthalenediimide Acceptor for Additive-Free High-Performance All-Polymer Solar Cells

Dong Chen et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

添加到收藏夹

Article Chemistry, Physical

Subtle Side-Chain Engineering of Random Terpolymers for High-Performance Organic Solar Cells

Lijun Huo et al.

CHEMISTRY OF MATERIALS (2018)

添加到收藏夹

Article Multidisciplinary Sciences

A low cost and high performance polymer donor material for polymer solar cells

Chenkai Sun et al.

NATURE COMMUNICATIONS (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Iris-Like Acceptor with Most PDI Units for Organic Solar Cells

Simiao Yu et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effective Molecular Engineering Approach for Employing a Halogen-Free Solvent for the Fabrication of Solution-Processed Small-Molecule Solar Cells

Zaheer Abbas et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Thienothiophene-based copolymers for high-performance solar cells, employing different orientations of the thiazole group as a π bridge

Dangqiang Zhu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

添加到收藏夹

Article Chemistry, Physical

Enhancing the Photovoltaic Performance via Vertical Phase Distribution Optimization in Small Molecule: PC71BM Blends

Yajie Zhang et al.

ADVANCED ENERGY MATERIALS (2017)

添加到收藏夹

Article Chemistry, Physical

Polymer Main-Chain Substitution Effects on the Efficiency of Nonfullerene BHJ Solar Cells

Yuliar Firdaus et al.

ADVANCED ENERGY MATERIALS (2017)

添加到收藏夹

Article Chemistry, Physical

The effect of side-chain substitution and hot processing on diketopyrrolopyrrole-based polymers for organic solar cells

Gael H. L. Heintges et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Small-Molecule Solar Cells with Simultaneously Enhanced Short-Circuit Current and Fill Factor to Achieve 11% Efficiency

Li Nian et al.

ADVANCED MATERIALS (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Hexafluoroquinoxaline Based Polymer for Nonfullerene Solar Cells Reaching 9.4% Efficiency

Shutao Xu et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Light dependent open-circuit voltage of organic bulk heterojunction solar cells in the presence of surface recombination

V. V. Brus

ORGANIC ELECTRONICS (2016)

添加到收藏夹

Article Chemistry, Physical

Optimized Alloy-Parallel Morphology of Ternary Organic Solar Cells

Zaiyu Wang et al.

ADVANCED ENERGY MATERIALS (2016)

添加到收藏夹

Editorial Material Nanoscience & Nanotechnology

Organic photovoltaics

Karl Leo

NATURE REVIEWS MATERIALS (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Dialkoxybithiazole: A New Building Block for Head-to-Head Polymer Semiconductors

Xugang Guo et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)

添加到收藏夹

Review Chemistry, Multidisciplinary

The case for organic photovoltaics

Seth B. Darling et al.

RSC ADVANCES (2013)

添加到收藏夹

Article Chemistry, Physical

Long-range corrected hybrid functionals for π-conjugated systems: Dependence of the range-separation parameter on conjugation length

Thomas Koerzdoerfer et al.

JOURNAL OF CHEMICAL PHYSICS (2011)

添加到收藏夹

Article Physics, Applied

Experimental determination of the rate law for charge carrier decay in a polythiophene: Fullerene solar cell

C. G. Shuttle et al.

APPLIED PHYSICS LETTERS (2008)

添加到收藏夹

Article Chemistry, Physical

A new hybrid exchange-correlation functional using the Coulomb-attenuating method (CAM-B3LYP)

T Yanai et al.

CHEMICAL PHYSICS LETTERS (2004)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.