4.6 Article

NbN nanodot decorated N-doped graphene as a multifunctional interlayer for high-performance lithium-sulfur batteries

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Multidisciplinary

P-Doped NiTe2 with Te-Vacancies in Lithium-Sulfur Batteries Prevents Shuttling and Promotes Polysulfide Conversion

Weiqi Yao et al.

Summary: In this study, a P-doped nickel tellurium electrocatalyst was used as a functional layer on the separator of high-performance Li-S batteries, which successfully addressed the shuttle effect and sluggish polysulfide conversion kinetics. The combination of MSC nanosheets and P-doped NiTe2-x electrocatalyst improved the cyclability, rate performance, and areal capacity of the Li-S battery, while reducing the electrolyte/sulfur usage ratio.

ADVANCED MATERIALS (2022)

Article Multidisciplinary Sciences

Self-assembled monolayers direct a LiF-rich interphase toward long-life lithium metal batteries

Yujing Liu et al.

Summary: In this study, self-assembled monolayers (SAMs) were utilized to control electrolyte degradation and solid-electrolyte interphase (SEI) formation in lithium metal batteries (LMBs), resulting in improved cycling performance and lifespan.

SCIENCE (2022)

Article Chemistry, Physical

Construction of Ti4O7/TiN/carbon microdisk sulfur host with strong polar N-Ti-O bond for ultralong life lithium-sulfur battery

Linlin Ma et al.

Summary: The study focuses on constructing a porous microdisk Ti4O7/TiN/C heterojunction with strong polar N-Ti-O covalent bonds at the interface, which helps achieve effective adsorption and conversion of LiPSs, thus efficiently restraining the shuttle effect. The design strategy shows outstanding specific capacity and cycling retention at different current densities.

ENERGY STORAGE MATERIALS (2022)

Article Engineering, Environmental

Roles of in situ-formed NbN and Nb2O5 from N-doped Nb2C MXene in regulating the re/hydrogenation and cycling performance of magnesium hydride

Zhiqiang Lan et al.

Summary: In this study, the hydrogen storage properties of MgH2 were improved by doping nitrogen-doped niobium carbide-supported niobium pentoxide. The doped composite showed a higher hydrogen uptake capacity, better cyclic stability, and the ability to release hydrogen at lower temperatures. Mechanism analysis revealed that the improvement was attributed to the suppression of MgH2 grain size, the presence of more active sites, and the elongation of Mg-H bond length.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Chemistry, Physical

Fe3N@N-doped graphene as a lithiophilic interlayer for highly stable lithium metal batteries

Xiaojuan Zhang et al.

Summary: This study presents a novel lithiophilic interlayer on a commercial PP separator to effectively suppress Li dendrite growth in lithium metal batteries. The functionalized separator exhibits excellent electrolyte wettability and high Li ionic conductivity, resulting in a longer battery life and superior cyclic stability for both symmetric cells and full cells.

ENERGY STORAGE MATERIALS (2022)

Article Engineering, Environmental

Anionic oxygen vacancies in Nb2O5-x/carbon hybrid host endow rapid catalytic behaviors for high-performance high areal loading lithium sulfur pouch cell

Shuang Cheng et al.

Summary: An oxygen-deficient electrocatalyst was developed to enhance the electrochemical performance in lithium/sulfur batteries, improving ion transport and catalytic reactions to achieve high capacity and long cycle life.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Engineering, Environmental

Catalyzing polysulfide redox conversion for promoting the electrochemical performance of lithium-sulfur batteries by CoFe alloy

Yue Hu et al.

Summary: The N-doped-carbon-layer-enveloped CoFe alloy nanoparticles successfully modified the separators for Li-S batteries, resulting in high sulfur utilization, high rate performance, and superior cycling stability. Even with high sulfur loading, high initial areal capacity and good capacity retention were achieved.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Physical

Direct trapping and rapid conversing of polysulfides via a multifunctional Nb2O5-CNT catalytic layer for high performance lithium-sulfur batteries

Yajing Liu et al.

Summary: A multifunctional Nb2O5-carbon nanotube (CNT) catalytic interface was designed and fabricated onto the separator to trap and catalyze polysulfides for advanced Li-S batteries. The sulfur cathode with the Nb2O5-CNT interface showed high initial discharge capacity and low capacity attenuation rate, while also suppressing self discharge and lithium dendrite formation effectively. This work provides insights into improving Li-S battery performance by designing a multifunctional catalytic interface to suppress shuttle effects and accelerate redox conversion.

CARBON (2021)

Article Materials Science, Multidisciplinary

Tri-functionalized polypropylene separator by rGO/MoO2 composite for high-performance lithium-sulfur batteries

Kun Xu et al.

Summary: By synthesizing and applying rGO/MoO2 composite to modify polypropylene separator, synergistic tri-functions are introduced to inhibit shuttle effect and enhance the electrochemical performances of lithium-sulfur batteries, showing promising results in long-period cycling stability and improved rate performance.

RARE METALS (2021)

Article Nanoscience & Nanotechnology

Lithiophilic 3D VN@N-rGO as a Multifunctional Interlayer for Dendrite-Free and Ultrastable Lithium-Metal Batteries

Xiaojuan Zhang et al.

Summary: A multifunctional layer was designed and fabricated to suppress dendrite growth in lithium-metal batteries, improving cycle stability significantly. The layer features high lithium ionic conductivity, excellent electrolyte wettability, and additional lithium-ion diffusion pathways for stable current density distribution.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Multidisciplinary

ZnS-SnS@NC Heterostructure as Robust Lithiophilicity and Sulfiphilicity Mediator toward High-Rate and Long-Life Lithium-Sulfur Batteries

Weiqi Yao et al.

Summary: By optimizing the lithiophilicity and sulfiphilicity, the ZnS-SnS@NC heterostructure demonstrates excellent sulfur electrochemistry with high reversibility, high rate performance, and long cycle life. This work provides a feasible scheme for the rational design of bimetal sulfides heterostructures and promotes the development of other electrochemical applications.

ACS NANO (2021)

Article Chemistry, Multidisciplinary

Atomic Tungsten on Graphene with Unique Coordination Enabling Kinetically Boosted Lithium-Sulfur Batteries

Peng Wang et al.

Summary: The use of catalytic materials to address the sluggish kinetics and shuttle effect in lithium-sulfur batteries is crucial, with single-atom catalysts on graphene modifiers showing improved electrochemical performance.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Article Chemistry, Multidisciplinary

Bimetal CoNi Active Sites on Mesoporous Carbon Nanosheets to Kinetically Boost Lithium-Sulfur Batteries

Rui Luo et al.

Summary: The synthesized mesoporous carbon-supported cobalt-nickel bimetal composite, CoNi@MPC, coated on the original separator, effectively improves the electrochemical performance of lithium-sulfur batteries and alleviates the shuttle effect of lithium polysulfides. The porous carbon as a conductive scaffold is advantageous for enhancing electronic conductivity.
Article Chemistry, Multidisciplinary

In Situ Construction of Mo2C Quantum Dots-Decorated CNT Networks as a Multifunctional Electrocatalyst for Advanced Lithium-Sulfur Batteries

Bo Yu et al.

Summary: The study presents a facile and scalable spray-drying strategy to construct conductive Mo2C quantum dots-decorated carbon nanotube networks as an efficient absorbent and electrocatalyst for Li-S batteries. The MCN/S electrode exhibits high specific capacity and ultrastable cycling stability, providing deep insights into polar nanoarchitecture design and scalable fabrication for advanced Li-S batteries.
Article Chemistry, Multidisciplinary

Super-Assembled Hierarchical CoO Nanosheets-Cu Foam Composites as Multi-Level Hosts for High-Performance Lithium Metal Anodes

Runhao Zhang et al.

Summary: By growing lithiophilic CoO nanosheets on Cu foam, a multi-level structure in 3D framework is formed, achieving uniform lithium deposition and improving charge transfer rate and capacity retention of the electrode.
Article Chemistry, Multidisciplinary

Single-Atom Zinc and Anionic Framework as Janus Separator Coatings for Efficient Inhibition of Lithium Dendrites and Shuttle Effect

Chun-Lei Song et al.

Summary: This study presents a Janus separator prepared with anionic metal-organic framework and single-atom zinc catalyst, which effectively inhibits the dendrite growth and shuttle effect of Li-S batteries. The results show stable cyclic performance and outstanding protection capability, making it suitable for various types of Li-S or Li-Se batteries.

ACS NANO (2021)

Article Chemistry, Multidisciplinary

Outstanding Catalytic Effects of 1T′-MoTe2 Quantum Dots@3D Graphene in Shuttle-Free Li-S Batteries

Bo Yu et al.

Summary: This study investigated the polar MoTe2 with different phases using density functional theory calculations to develop high-performance sulfur electrodes for Li-S batteries. The optimization of synthesis led to the preparation of MTQ@3DG/S, which showed exceptional performance with highly reversible discharge capacity and efficient suppression of the shuttle effect of LiPSs. Owing to the high catalytic effect of 1T'-MoTe2 quantum dots, MTQ@3DG/S exhibited a low capacity fade rate over 600 cycles.

ACS NANO (2021)

Article Chemistry, Physical

Implanting nickel and cobalt phosphide into well-defined carbon nanocages: A synergistic adsorption-electrocatalysis separator mediator for durable high-power Li-S batteries

Zeliang Wu et al.

Summary: This study demonstrates the use of Ni, Co bimetal phosphides in hollow carbon nanocages as a multifunctional separator interlayer for high-power Li-S batteries, achieving outstanding cyclic lifespan and rate performance.

ENERGY STORAGE MATERIALS (2021)

Article Chemistry, Physical

In situ synthesis of an ultrafine heterostructural Nb2O5-NbC polysulfide promotor for high-performance Li-S batteries

Zhaoxia Cao et al.

Summary: This study proposes an effective strategy to enhance the performance of lithium-sulfur batteries by synthesizing ultrafine heterostructural Nb2O5-NbC distributed homogeneously in a carbon nanofiber matrix. Using polystyrene as a nanocrystallite growth modulator successfully suppresses particle agglomeration, forming in situ heterostructures that regulate lithium polysulfide effectively and speed up redox kinetics. The battery containing these heterostructures shows long-term stability with low capacity decay, even after hundreds of cycles at different discharge rates and sulfur loadings.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Article Chemistry, Multidisciplinary

Suppressing the Shuttle Effect and Dendrite Growth in Lithium-Sulfur Batteries

Jianan Wang et al.

ACS NANO (2020)

Article Chemistry, Applied

Efficient polysulfide blocker from conductive niobium nitride@graphene for Li-S batteries

Huifa Shi et al.

JOURNAL OF ENERGY CHEMISTRY (2020)

Review Chemistry, Multidisciplinary

In situ optical spectroscopy characterization for optimal design of lithium-sulfur batteries

Li Zhang et al.

CHEMICAL SOCIETY REVIEWS (2019)

Article Nanoscience & Nanotechnology

Fe3O4-Decorated Porous Graphene Interlayer for High-Performance Lithium-Sulfur Batteries

Yuanming Liu et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Article Chemistry, Multidisciplinary

Nickel-Iron Layered Double Hydroxide Hollow Polyhedrons as a Superior Sulfur Host for Lithium-Sulfur Batteries

Jintao Zhang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

Article Chemistry, Physical

A separator-based lithium polysulfide recirculator for high-loading and high-performance Li-S batteries

Ming Li et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Article Chemistry, Multidisciplinary

Electrocatalysis on Separator Modified by Molybdenum Trioxide Nanobelts for Lithium-Sulfur Batteries

Sumair Imtiaz et al.

ADVANCED MATERIALS INTERFACES (2018)

Article Nanoscience & Nanotechnology

Atom-Thick Interlayer Made of CVD-Grown Graphene, Film on Separator for Advanced Lithium-Sulfur Batteries

Zhenzhen Du et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Article Chemistry, Multidisciplinary

MoS2/Celgard Separator as Efficient Polysulfide Barrier for Long-Life Lithium-Sulfur Batteries

Zahid Ali Ghazi et al.

ADVANCED MATERIALS (2017)

Article Chemistry, Multidisciplinary

Kinetically-enhanced polysulfide redox reactions by Nb2O5 nanocrystals for high-rate lithium-sulfur battery

Yingqing Tao et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

Article Nanoscience & Nanotechnology

In Situ Raman Spectroscopy of Sulfur Speciation in Lithium-Sulfur Batteries

Heng-Liang Wu et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Article Chemistry, Multidisciplinary

Mechanism and Kinetics of Li2S Precipitation in Lithium-Sulfur Batteries

Frank Y. Fan et al.

ADVANCED MATERIALS (2015)

Review Chemistry, Multidisciplinary

Rechargeable Lithium-Sulfur Batteries

Arumugam Manthiram et al.

CHEMICAL REVIEWS (2014)

Review Chemistry, Multidisciplinary

Lithium-Sulfur Batteries: Electrochemistry, Materials, and Prospects

Ya-Xia Yin et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2013)

Review Chemistry, Multidisciplinary

Nanostructured sulfur cathodes

Yuan Yang et al.

CHEMICAL SOCIETY REVIEWS (2013)

Article Electrochemistry

In-Situ Raman Investigation of Polysulfide Formation in Li-S Cells

M. Hagen et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2013)

Article Chemistry, Applied

A quantum-chemical study on the discharge reaction mechanism of lithium-sulfur batteries

Lijiang Wang et al.

JOURNAL OF ENERGY CHEMISTRY (2013)

Article Chemistry, Physical

Communications: Elementary oxygen electrode reactions in the aprotic Li-air battery

J. S. Hummelshoj et al.

JOURNAL OF CHEMICAL PHYSICS (2010)

Article Chemistry, Physical

A highly ordered nanostructured carbon-sulphur cathode for lithium-sulphur batteries

Xiulei Ji et al.

NATURE MATERIALS (2009)

Article Materials Science, Multidisciplinary

Real-space grid implementation of the projector augmented wave method

JJ Mortensen et al.

PHYSICAL REVIEW B (2005)