☆ 4.4 Article

Dental Poly(methyl methacrylate)-Based Resin Containing a Nanoporous Silica Filler

JOURNAL OF FUNCTIONAL BIOMATERIALS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Dentistry, Oral Surgery & Medicine

Size-controllable synthesis of dendritic porous silica as reinforcing fillers for dental composites

Hongyan Chen et al.

Summary: Hierarchical porous silica particles with center-radial hierarchical pores and controllable size ranging from 75 to 1000 nm were synthesized and utilized in dental composites, showing superior reinforcing effect and cytocompatibility. The particle size and morphology significantly influence the mechanical properties of composite materials, with DPS-500 particles exhibiting the highest improvements in flexural strength, flexural modulus, compressive strength, and work of fracture compared to DPS-75 filled composite.

DENTAL MATERIALS (2021)

添加到收藏夹

Review Chemistry, Physical

The Development of Filler Morphology in Dental Resin Composites: A Review

Jiani Liu et al.

Summary: The emergence of new fillers in dental resin composites has not only improved their mechanical properties, but also endowed them with additional functional characteristics. These new fillers are closely related to the improvement of traditional fillers and show potential for enhancing the performance of next-generation DRCs.

MATERIALS (2021)

添加到收藏夹

Article Polymer Science

Development of Dental Poly(methyl methacrylate)-Based Resin for Stereolithography Additive Manufacturing

Kentaro Hata et al.

Summary: A novel PMMA-based resin for SLA 3D-printing was developed in this study by mixing MMA, EGDMA, and PMMA powder, with optimal composition determined as 30% PMMA, 56% EGDMA, 14% MMA. The resin showed comparable or higher mechanical properties to commercial resins and acceptable physicochemical properties and cytotoxicity for oral environment use, making it a potential candidate material for dental applications.

POLYMERS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Behaviour of PMMA Resin Composites Incorporated with Nanoparticles or Fibre following Prolonged Water Storage

Abdulaziz Alhotan et al.

Summary: The study evaluated the effects of water sorption and hygroscopic expansion in PMMA denture base acrylics reinforced with nanoparticles or fibre compared to non-reinforced PMMA. The results showed that ZrO2 nanoparticles and E-glass fibres did not increase water solubility/sorption, while TiO2 did significantly increase water sorption level.

NANOMATERIALS (2021)

添加到收藏夹

Article

Comparison of the Accuracy of Fixture-Level Implant Impression Making with Different Splinting Techniques

Mehrdad Nateghi et al.

International Journal of Dentistry (2021)

添加到收藏夹

Article Chemistry, Physical

Flexural Strength and Hardness of Filler-Reinforced PMMA Targeted for Denture Base Application

Abdulaziz Alhotan et al.

Summary: The flexural strength and surface hardness of heat-cured PMMA were significantly improved by adding ZrO2 nanoparticles, TiO2 nanoparticles, and E-glass fibre. The optimal filler concentrations for enhancing flexural strength were found to be between 3-5% ZrO2, 1.5% TiO2, and 3-7% E-glass fibre. Fillers at a concentration of 3 wt.% and above significantly improved hardness for all composites.

MATERIALS (2021)

添加到收藏夹

Article Polymer Science

Preparation, Thermal, and Thermo-Mechanical Characterization of Polymeric Blends Based on Di(meth)acrylate Monomers

Krystyna Wnuczek et al.

Summary: This study focused on the preparation and thermo-mechanical characteristics of polymeric blends based on di(meth)acrylates monomers, using Bisphenol A glycerolate diacrylate (BPA.GDA) or ethylene glycol dimethacrylate (EGDMA) as crosslinking monomers. The copolymers were confirmed by ATR/FT-IR spectroscopy, and their thermal and mechanical properties were analyzed using DSC, TG/DTG, and DMA. The influence of different amounts of a modifying soluble additive (PC) on the physicochemical properties was discussed in detail, along with evaluations of surface properties using AFM.

POLYMERS (2021)

添加到收藏夹

Article Chemistry, Physical

Assessing Fracture Toughness and Impact Strength of PMMA Reinforced with Nano-Particles and Fibre as Advanced Denture Base Materials

Abdulaziz Alhotan et al.

Summary: The study investigated the effects of E-glass fibre, ZrO2, and TiO2 nanoparticles on the fracture toughness and impact strength of PMMA denture base. Results showed that ZrO2, TiO2, and E-glass fibre reinforcements significantly improved fracture toughness and impact strength in PMMA, with 3 wt.% ZrO2 showing the highest fracture toughness. E-glass fibres were particularly effective in enhancing impact strength, while ZrO2 or TiO2 nanoparticles did not have a significant impact on impact strength in comparison to the control group.

MATERIALS (2021)

添加到收藏夹

Review Polymer Science

Influence of Reinforcing Agents on the Mechanical Properties of Denture Base Resin: A Systematic Review

Alhanoof Aldegheishem et al.

Summary: This systematic review investigated the reinforcing effect of fillers on the mechanical properties of denture base resin, and found that fillers chemically bonded and well-dispersed in the resin can increase fracture strength, toughness, and impact strength.

POLYMERS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Improvement of PMMA Dental Matrix Performance by Addition of Titanium Dioxide Nanoparticles and Clay Nanotubes

Mariafrancesca Cascione et al.

Summary: The addition of nanomaterials in PMMA can improve its performance, particularly in reducing Candida albicans colonization, with a dose-dependent effect.

NANOMATERIALS (2021)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Effect of Thermal Cycling on Flexural Properties of Microcrystalline Cellulose-Reinforced Denture Base Acrylic Resins

Amira Ali Abdel Rahaman Ali et al.

JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY (2020)

添加到收藏夹

Review Polymer Science

Water-Soluble Photoinitiators in Biomedical Applications

Wiktoria Tomal et al.

POLYMERS (2020)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Response of two gingival cell lines to CAD/CAM composite blocks

Rasha A. Alamoush et al.

DENTAL MATERIALS (2020)

添加到收藏夹

Review Chemistry, Physical

A Review on the Biocompatibility of PMMA-Based Dental Materials for Interim Prosthetic Restorations with a Glimpse into Their Modern Manufacturing Techniques

Silviu Mirel Pituru et al.

MATERIALS (2020)

添加到收藏夹

Review Polymer Science

Prosthodontic Applications of Polymethyl Methacrylate (PMMA): An Update

Muhammad Sohail Zafar

POLYMERS (2020)

添加到收藏夹

Article Medicine, Research & Experimental

A Feasibility Study for 3D-printed Poly(methyl methacrylate)-resin Tracheostomy Tube Using a Hamster Cheek Pouch Model

Harry Jung et al.

IN VIVO (2020)

添加到收藏夹

Article Engineering, Biomedical

PMMA/double-modified organoclay nanocomposites as fillers for denture base materials with improved mechanical properties

Fateme Shakeri et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2019)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Preparation of silica-poly(methyl methacrylate) composite with a nanoscale dual-network structure and hardness comparable to human enamel

Hiroshi Ikeda et al.

DENTAL MATERIALS (2019)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Evaluation of Flexural Strength of Different Denture Base Materials Reinforced with Different Nanoparticles

Muhammet Karci et al.

JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY (2019)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

The Effect of Silica and Prepolymer Nanoparticles on the Mechanical Properties of Denture Base Acrylic Resin

Pinar Cevik et al.

JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY (2018)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

The synthesis, modification, and application of nanosilica in polymethyl methacrylate denture base

Pornpot Jiangkongkho et al.

DENTAL MATERIALS JOURNAL (2018)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Effect of Pressure, Post-Pressing Time, and Polymerization Cycle on the Degree of Conversion of Thermoactivated Acrylic Resin

Rafaella de S. Leao et al.

INTERNATIONAL JOURNAL OF DENTISTRY (2018)

添加到收藏夹

Review Nanoscience & Nanotechnology

PMMA denture base material enhancement: a review of fiber, filler, and nanofiller addition

Mohammed M. Gad et al.

INTERNATIONAL JOURNAL OF NANOMEDICINE (2017)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Effect of untreated zirconium oxide nanofiller on the flexural strength and surface hardness of autopolymerized interim fixed restoration resins

Abdolhamid Alhavaz et al.

JOURNAL OF ESTHETIC AND RESTORATIVE DENTISTRY (2017)

添加到收藏夹

Review Dentistry, Oral Surgery & Medicine

Nanoparticles in dentistry

Gottfried Schmalz et al.

DENTAL MATERIALS (2017)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Synthesis of wrinkled mesoporous silica and its reinforcing effect for dental resin composites

Ruili Wang et al.

DENTAL MATERIALS (2017)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Influence of the cross-linking agent on mechanical properties of PMMA powder with compromised particle morphology

Tassanaporn Saen-Isara et al.

INTERNATIONAL ORTHODONTICS (2017)

添加到收藏夹

Review Materials Science, Biomaterials

Inorganic Fillers for Dental Resin Composites: Present and Future

Eric Habib et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)

添加到收藏夹

Review Materials Science, Biomaterials

Inorganic Fillers for Dental Resin Composites: Present and Future

Eric Habib et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Bulk-fill resin composites: Polymerization properties and extended light curing

Jose Zorzin et al.

DENTAL MATERIALS (2015)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Fluoride release, recharge and flexural properties of polymethylmethacrylate containing fluoridated glass fillers

I. A. Al-Bakri et al.

AUSTRALIAN DENTAL JOURNAL (2014)

添加到收藏夹

Article Engineering, Biomedical

Reinforcement of denture base PMMA with ZrO2 nanotubes

Wei Yu et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2014)

添加到收藏夹

Article Engineering, Biomedical

Function of MAPK and downstream transcription factors in monomer-induced apoptosis

Stephanie Krifka et al.

BIOMATERIALS (2012)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Nano-porous thermally sintered nano silica as novel fillers for dental composites

Mohammad Atai et al.

DENTAL MATERIALS (2012)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Effect of different amounts of 3-methacryloxypropyltrimethoxysilane on the flexural properties and wear resistance of alumina reinforced PMMA

Pisaisit Chaijareenont et al.

DENTAL MATERIALS JOURNAL (2012)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Mechanical and thermal properties of denture PMMA reinforced with silanized aluminum borate whiskers

Xinjing Zhang et al.

DENTAL MATERIALS JOURNAL (2012)

添加到收藏夹

Review Engineering, Biomedical

Biocompatibility of polymethylmethacrylate resins used in dentistry

Rupali Gautam et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2012)

添加到收藏夹

Article Engineering, Biomedical

Activation of stress-regulated transcription factors by triethylene glycol dimethacrylate monomer

Stephanie Krifka et al.

BIOMATERIALS (2011)

添加到收藏夹

Review Dentistry, Oral Surgery & Medicine

Resin composite-State of the art

Jack L. Ferracane

DENTAL MATERIALS (2011)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Effect of PMMA filler particles addition on the physical properties of resin composite

Yoshiko Kondo et al.

DENTAL MATERIALS JOURNAL (2010)

添加到收藏夹

Review Dentistry, Oral Surgery & Medicine

Update on Dental Nanocomposites

M. -H. Chen

JOURNAL OF DENTAL RESEARCH (2010)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Mechanical properties of experimental dental composites containing a combination of mesoporous and nonporous spherical silica as fillers

Solomon Praveen Samuel et al.

DENTAL MATERIALS (2009)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Effect of the amount of 3-methacyloxypropyltrimethoxysilane coupling agent on physical properties of dental resin nanocomposites

Irini D. Sideridou et al.

DENTAL MATERIALS (2009)

添加到收藏夹

Article Chemistry, Physical

Formation and photoluminescence characterization of transparent silica glass prepared by solid-phase reaction of nanometer-sized silica particles

Tomoko Yamada et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2007)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

The effect of ceramic and porous filters on the mechanical properties of experimental dental composites

AA Zandinejad et al.

DENTAL MATERIALS (2006)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microscopic structure of nanometer-sized silica particles

T Uchino et al.

PHYSICAL REVIEW B (2004)

添加到收藏夹

Article Polymer Science

Degree of conversion of a copolymer of an experimental monomer and methyl methacrylate for dental applications

EK Viljanen et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2004)

添加到收藏夹

Review Polymer Science

Photopolymerization kinetics of multifunctional monomers

E Andrzejewska

PROGRESS IN POLYMER SCIENCE (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.