☆ 4.7 Article

Natural Hydrogel-Based Bio-Inks for 3D Bioprinting in Tissue Engineering: A Review

GELS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Biomaterials

Anisotropic PLGA microsphere/PVA hydrogel composite with aligned macroporous structures for directed cell adhesion and proliferation

Shuang Liu et al.

Summary: This study investigated the fabrication of anisotropic microsphere/hydrogel composites with improved and directed cell adhesion characteristics using a novel directional freezing-thawing (DFT) technique. The results showed that the DFT technique improved the compressive strength of the composite and enhanced the proliferation and adhesion of cultured cells.

INTERNATIONAL JOURNAL OF POLYMERIC MATERIALS AND POLYMERIC BIOMATERIALS (2023)

添加到收藏夹

Review Chemistry, Applied

Polysaccharide hydrogels: Functionalization, construction and served as scaffold for tissue engineering

Qian Yang et al.

Summary: This review provides a comprehensive framework about the potential and challenges that polysaccharide hydrogels face in tissue engineering. It introduces the strategies for modifying polysaccharides and the techniques for inducing hydrogel formation. It also highlights the applications of polysaccharide hydrogels in vivo and addresses future research prospects and challenges.

CARBOHYDRATE POLYMERS (2022)

添加到收藏夹

Review Polymer Science

A review on recent advances of Protein-Polymer hydrogels

Yuanhan Tang et al.

Summary: Protein-polymer hydrogels, as biomaterials with diverse properties, have been widely applied in tissue engineering, drug delivery, sensors, and other fields. The current challenges and future prospects of protein-polymer hydrogels were highlighted, providing meaningful reference for this field.

EUROPEAN POLYMER JOURNAL (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

A fast method for in vitro biomineralization of PVA/alginate/biphasic calcium phosphate hydrogel

Lei Nie et al.

Summary: This study demonstrated the potential of using urease for fast in vitro biomineralization on hydrogels, resulting in quicker formation of bone-like apatite compared to other treatment methods. Bone marrow derived mesenchymal stem cells adhered and proliferated on the surface of the biomineralized hydrogels.

MATERIALS LETTERS (2022)

添加到收藏夹

Review Chemistry, Applied

Fungal exopolysaccharides: Properties, sources, modifications, and biomedical applications

Masoud Hamidi et al.

Summary: Fungal exopolysaccharides have diverse potential applications in various industries. However, there are only a few commercialized products based on fungal EPSs in the biomedical field. This review critically discusses the potential biomedical applications of fungal EPSs in tissue engineering, drug and gene delivery.

CARBOHYDRATE POLYMERS (2022)

添加到收藏夹

Article Materials Science, Biomaterials

Polysaccharide-based hydrogels: properties, advantages, challenges, and optimization methods for applications in regenerative medicine

Pooria Safarzadeh Kozani et al.

Summary: Research has been focused on the design and development of natural polymers-based hydrogels, particularly polysaccharide-based hydrogels, due to their superior physicochemical and biological characteristics. However, these biomaterials still face challenges, prompting the need for diverse optimization strategies to improve their properties and performance.

INTERNATIONAL JOURNAL OF POLYMERIC MATERIALS AND POLYMERIC BIOMATERIALS (2022)

添加到收藏夹

Article Polymer Science

Experimental investigation and optimization of printing parameters of3Dprinted polyphenylene sulfide through response surface methodology

Anouar El Magri et al.

Summary: Fused filament fabrication is currently widely used for high performance materials manufacturing, with polyphenylene sulfide chosen as the base material in this study. Optimizing parameters such as nozzle temperature, printing speed, and layer thickness significantly improved the output responses. Additionally, annealing the printed PPS parts at 200 degrees Celsius for 1 hour enhanced their thermal, structural, and tensile properties.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

添加到收藏夹

Article Engineering, Biomedical

A rheological approach to assess the printability of thermosensitive chitosan-based biomaterial inks

Maedeh Rahimnejad et al.

Summary: This study developed a rheological approach to characterize the printability of chitosan-based thermosensitive inks. The research found that hydrogels with different formulations exhibit different rheological properties under different conditions.

BIOMEDICAL MATERIALS (2021)

添加到收藏夹

Review Engineering, Chemical

A State-of-the-Art Review of Laser-Assisted Bioprinting and its Future Research Trends

Chaoran Dou et al.

Summary: Bioprinting technology, specifically laser-assisted bioprinting, offers high resolution and cell viability for precise cell control in reconstructing living organs. Recent studies highlight the developments, advantages, disadvantages, potential applications, technical challenges, and future research trends of LAB technologies.

CHEMBIOENG REVIEWS (2021)

添加到收藏夹

Review Engineering, Biomedical

Evaluation of silk-based bioink during pre and post3Dbioprinting: A review

Sharda Gupta et al.

Summary: In recent decades, the demand for organ replacement has been increasing due to advancements in tissue engineering and 3D bioprinting. Silk has emerged as a valuable bioink for bioprinting due to its tunable biodegradability, biocompatibility, elasticity, and mechanical robustness. Various 3D bioprinting techniques suitable for silk-based bioink are discussed in the review, highlighting the need for further development to create heterogeneous tissue constructs.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2021)

添加到收藏夹

Article Materials Science, Biomaterials

Additive manufacturing of hydroxyapatite-chitosan-genipin composite scaffolds for bone tissue engineering applications

K. Zafeiris et al.

Summary: Additive manufacturing was used to create 3D scaffolds for bone tissue engineering by synthesizing hybrid hydroxyapatite hydrogels through a bioinspired approach, with modifications in rheology and printing parameters to optimize the final product. Evaluation of porosity and biocompatibility demonstrated that the scaffolds had suitable properties for cell adhesion and viability.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2021)

添加到收藏夹

Article Chemistry, Physical

Recapitulating macro-scale tissue self-organization through organoid bioprinting

Jonathan A. Brassard et al.

Summary: The 3D bioprinting approach combines organoid-forming stem cells and extracellular matrix to achieve tissue self-organization, allowing for the generation of tissues with complex structures and diverse cell types at centimeter scales. This method opens up new avenues for drug discovery, diagnostics, and regenerative medicine by controlling tissue self-organization from millimeter to centimeter scales.

NATURE MATERIALS (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Emerging Technologies in Multi-Material Bioprinting

Hossein Ravanbakhsh et al.

Summary: Bioprinting aims at creating functional biomimetic constructs, and multi-material bioprinting allows for better replication of cellular diversity and tissue complexity, opening up new opportunities for tissue engineering, tissue model engineering, therapeutics development, and personalized medicine.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Extracellular-Matrix-Reinforced Bioinks for 3D Bioprinting Human Tissue

Martina M. De Santis et al.

Summary: The study introduces a hybrid bioink composed of alginate and rECM for 3D bioprinting, showing promising printing properties and biological inductive capabilities for generating human tissue.

ADVANCED MATERIALS (2021)

添加到收藏夹

Review Biochemical Research Methods

Historical evolution of spheroids and organoids, and possibilities of use in life sciences and medicine

Marna Eliana Sakalem et al.

Summary: 3D cell cultures provide a more realistic in vitro representation of tissues and organs, accurately representing in vivo conditions and providing data on cell-to-cell interactions. While incapable of replacing other research types, they can substitute unnecessary animal experimentation and complement monolayer cultures.

BIOTECHNOLOGY JOURNAL (2021)

添加到收藏夹

Article Chemistry, Physical

Cellular extrusion bioprinting improves kidney organoid reproducibility and conformation

Kynan T. Lawlor et al.

Summary: The study demonstrates the use of extrusion-based three-dimensional cellular bioprinting to rapidly and efficiently generate kidney organoids with highly reproducible cell number and viability. This technology not only improves throughput and quality control in organoid production, but also facilitates precise control of structure, enhancing the in vitro and in vivo applications of stem cell-derived human kidney tissue.

NATURE MATERIALS (2021)

添加到收藏夹

Article Cell & Tissue Engineering

Injectable Ultrasonication-Induced Silk Fibroin Hydrogel for Cartilage Repair and Regeneration

Tao Yuan et al.

Summary: Injectable silk fibroin hydrogel fabricated using ultrasonication is a promising strategy for promoting cartilage regeneration. The hydrogel demonstrated satisfactory physiochemical and biomechanical properties in vitro and in vivo experiments, indicating its potential for cartilage repair and regeneration.

TISSUE ENGINEERING PART A (2021)

添加到收藏夹

Article Engineering, Biomedical

Fabrication of microvascular constructs using high resolution electrohydrodynamic inkjet printing

Fei Zheng et al.

Summary: The use of EHD inkjet printing has successfully created hydrogel-based microvascular tissues with hierarchical and branching channels, allowing for co-culture of human dermal fibroblasts and human umbilical vein endothelial cells. The technique maintains tissue-specific morphology and offers a new strategy for developing vascular models with high spatial resolution.

BIOFABRICATION (2021)

添加到收藏夹

Review Biochemistry & Molecular Biology

The ECM: To Scaffold, or Not to Scaffold, That Is the Question

Jonard Corpuz Valdoz et al.

Summary: ECM in tissue engineering plays a crucial role, with scaffold-based and scaffold-free techniques each having their own advantages and limitations. Scaffold-free techniques are suitable for high-throughput cell aggregates preparation, while scaffold-based techniques are more suitable for modeling organotypic models that mimic the native ECM.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Fruit pomace-lignin as a sustainable biopolymer for biomedical applications

Oseweuba Valentine Okoro et al.

Summary: This review discusses the potential biomedical applications of pomace-lignin and the challenges hindering its industrial utilization, aiming to improve the efficiency of its valorization.

JOURNAL OF CLEANER PRODUCTION (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Preparation of cellulose-based hydrogel: a review

Sarah Husnaini Zainal et al.

Summary: Cellulose, the most abundant natural organic polymer on earth, has low solubility in water and most organic solvents. Specific solvent systems are required for cellulose applications. Hydrogel, as a 3D network structure, can retain a tremendous amount of water and highly depends on the crosslinking property.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

添加到收藏夹

Article Engineering, Biomedical

A photo-crosslinkable cartilage-derived extracellular matrix bioink for auricular cartilage tissue engineering

Dafydd O. Visscher et al.

Summary: The study developed a printable bioink cdECMMA derived from porcine auricular cartilage, which exhibited good rheological properties and mechanical integrity. Chondrocytes in the printed cdECMMA hydrogel maintained viability, proliferation capacity, and produced cartilage ECM components. The novel cell-based bioprinting using this cartilage-specific dECMMA bioink offers an alternative option for auricular cartilage reconstruction.

ACTA BIOMATERIALIA (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

3D Printed Enzyme-Functionalized Scaffold Facilitates Diabetic Bone Regeneration

Chen Yang et al.

Summary: A multifunctional scaffold for diabetic bone defect has been developed, with properties including osteogenesis, angiogenesis, and anti-inflammation. Enzyme functionalization and mineralization were key strategies in addressing the high risk of fractures and poor bone healing ability in diabetic patients. The scaffold showed promising outcomes in enhancing bone tissue regeneration in in vitro and in vivo studies, highlighting the potential of multifunctional scaffolds for diabetic bone regeneration.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Biotechnology & Applied Microbiology

Synthesis of a novel nanocomposite containing chitosan as a three-dimensional printed wound dressing technique: Emphasis on gene expression

Fatemeh Azadmanesh et al.

Summary: In this study, a highly porous three-dimensional (3D)-printed wound healing core/shell scaffold composed of PLA, HA, Cu-CDs, rosmarinic acid, and chitosan hydrogel was fabricated. Cu-CDs exhibited excellent antibacterial activity at 1 mg ml(-1) concentration and good biocompatibility at 0.25 mg ml(-1) concentration. Wound healing experiments on rats showed that the composite scaffold significantly improved the wound healing process compared to the PLA scaffold.

BIOTECHNOLOGY PROGRESS (2021)

添加到收藏夹

Article Biochemistry & Molecular Biology

Bioprinting of Human Liver-Derived Epithelial Organoids for Toxicity Studies

Manon C. Bouwmeester et al.

Summary: The use of human liver-derived epithelial organoids combined with biofabrication techniques shows great potential for creating complex and customizable in vitro models. Bioprinted constructs with human hepatocyte-like cells demonstrate stable cell viability, increased expression of hepatic markers, and potential for toxicity testing. This approach holds promise for developing perfusable, complex constructs for toxicology and disease modeling.

MACROMOLECULAR BIOSCIENCE (2021)

添加到收藏夹

Review Dentistry, Oral Surgery & Medicine

3D printing parameters, supporting structures, slicing, and post-processing procedures of vat-polymerization additive manufacturing technologies: A narrative review

Wenceslao Piedra-Cascon et al.

Summary: The study reviewed the elements of vat-polymerization workflow, including 3D printing parameters, support structures, slicing, and post-processing procedures, and how they affect the characteristics of manufactured dental devices. Continuous improvement is needed in selecting optimal printing and supporting parameters, slicing, and post-processing procedures for dental applications. Results demonstrate that the technology, printer, and material selection influence the accuracy and properties of AM dental devices.

JOURNAL OF DENTISTRY (2021)

添加到收藏夹

Article Materials Science, Biomaterials

Biomimetic algal polysaccharide coated 3D nanofibrous scaffolds promote skin extracellular matrix formation

Prerana Singh et al.

Summary: The study developed a skin scaffold by coating bio-mimetic ECM cues on nanofibers, mimicking the 3D microenvironment of skin ECM and promoting adhesion, growth, survival, and proliferation of fibroblasts. Enhanced gene expression and excessive secretion of collagen proteins contributed to the formation of a conducive skin ECM microenvironment.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2021)

添加到收藏夹

Article Biotechnology & Applied Microbiology

Human heart-forming organoids recapitulate early heart and foregut development

Lika Drakhlis et al.

Summary: This study successfully generated three-dimensional heart-forming organoids that closely resemble early native heart anlagen, containing myocardial layer, endocardial-like cells, septum-transversum-like anlagen, and distinct anterior versus posterior foregut endoderm tissues. These organoids were used to study genetic defects in vitro and demonstrated a phenotype similar to cardiac malformations seen in transgenic mice with the knockout of NKX2.5 gene.

NATURE BIOTECHNOLOGY (2021)

添加到收藏夹

Article Polymer Science

Three-Dimensional Printable Hydrogel Using a Hyaluronic Acid/Sodium Alginate Bio-Ink

Su Jeong Lee et al.

Summary: The study developed a method to synthesize bio-ink using HA and SA, without chemical crosslinking agents, for 3D bio-printing applications. The printed hydrogels maintained their integrity with no significant shrinkage and exhibited higher cell proliferation rates compared to SA-only bio-ink, showing promise for tissue engineering applications.

POLYMERS (2021)

添加到收藏夹

Review Oncology

Organoid and Spheroid Tumor Models: Techniques and Applications

Sreenivasulu Gunti et al.

Summary: 3D cell culture models like organoids and spheroids have unique advantages and applications, with organoids resembling the original tissue and being suitable for personalized medicine. Organoid-on-chip models combine organoid methods with micro-chip technology to simulate dynamic microenvironments.

CANCERS (2021)

添加到收藏夹

Review Biotechnology & Applied Microbiology

Bioink Formulations for Bone Tissue Regeneration

Na Li et al.

Summary: Bioprinting technology uses bioinks to construct scaffolding systems, enabling the fabrication of complex and porous structures for even cell distribution and signal factor release. 4D bioprinting technology is gaining attention, but challenges remain in terms of processing bioink, mechanical properties of hydrogel implants, and cell-guided functionality of biomaterials.

FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2021)

添加到收藏夹

Review Engineering, Biomedical

Engineering of tissue constructs using coaxial bioprinting

Andrew Kjar et al.

Summary: Coaxial bioprinting is an emerging technology that enhances engineering versatility in bioprinting and enables the fabrication of complex tissue constructs through concentric deposition of biomaterials. This technology has the potential to significantly contribute to in vitro modeling, pharmaceutical development, and clinical regenerative medicine by creating integrated tissue structures with complex cell composition and multi-material gradient profiles.

BIOACTIVE MATERIALS (2021)

添加到收藏夹

Article Chemistry, Applied

Extrusion bioprinting of hydroxyethylcellulose-based bioink for cervical tumor model

Antonina Gospodinova et al.

Summary: This study demonstrates the extrusion printing of highly viscous and thixotropic hydroxyethylcellulose-based bioinks blended with various concentrations of sodium alginate (SA) and embedded with HeLa cells. The cell viability was shown to be inversely proportional to the relative SA content, and biocompatibility of the hydrogel matrix supported cell proliferation resulting in a larger number of cells. Cell viability was mainly affected by extrusion printing itself, with some cell death occurring during embedding in the hydrogels. After embedding the HeLa cells in blends containing 1 and 2.5 % SA, cell viability was not significantly affected by residence time before bioink extrusion.

CARBOHYDRATE POLYMERS (2021)

添加到收藏夹

Review Cell & Tissue Engineering

Research progress in decellularized extracellular matrix-derived hydrogels

Wenhui Zhang et al.

Summary: dECM and hydrogels are widely used in regenerative medicine as biocompatible materials with unique biological activity. Hydrogels, with their high water content and ability to simulate human tissue environments, are considered ideal materials for tissue engineering.

REGENERATIVE THERAPY (2021)

添加到收藏夹

Article Biotechnology & Applied Microbiology

3D Bioprinting of Pectin-Cellulose Nanofibers Multicomponent Bioinks

Matteo Pitton et al.

Summary: By developing multicomponent bioinks combining pectin with TEMPO-oxidized cellulose nanofibers (TOCNFs), the research optimized the printability of pectin inks, ensuring stability of the printed hydrogels and viability of cell-laden inks.

FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Improved chondrogenic performance with protective tracheal design of Chitosan membrane surrounding 3D-printed trachea

Hyeonji Kim et al.

Summary: This study introduces a novel design of tissue-engineered trachea, composed of a chitosan-based nanofiber membrane and a 3D-printed biotracheal construct, which successfully enhances the chondrogenic performance of chondrocytes. This protective design opens a new avenue in engineered tissue research.

SCIENTIFIC REPORTS (2021)

添加到收藏夹

Review Crystallography

Three-Dimensional Printing of Hydroxyapatite Composites for Biomedical Application

Yanting Han et al.

Summary: This review discusses the use of 3D printing technologies for preparing porous HA-based nanocomposites and explores the properties of HA-based composites synthesized through 3D printing. The article also delves into the applications of HA-based nanocomposites in tissue engineering and potential future developments.

CRYSTALS (2021)

添加到收藏夹

Review Engineering, Biomedical

Multimaterial bioprinting and combination of processing techniques towards the fabrication of biomimetic tissues and organs

Maryam Tavafoghi et al.

Summary: Multimaterial 3D bioprinting techniques are essential for addressing challenges in tissue reconstruction, aiming to develop technologies that can integrate various biomaterials and bioprinting capabilities for creating more complex tissue structures.

BIOFABRICATION (2021)

添加到收藏夹

Review Polymer Science

Recent Advances in Chemically-Modified and Hybrid Carrageenan-Based Platforms for Drug Delivery, Wound Healing, and Tissue Engineering

Hamidreza Mokhtari et al.

Summary: Recent studies have focused on the advantages of carrageenan-based hydrogels, which include biocompatibility, antioxidative, antitumor properties, amongst others. Simple ionic crosslinking can transform them into three-dimensional hydrogels. Chemical modifications can overcome limitations and form chemically crosslinked hydrogels with significant mechanical properties. Incorporating nanoparticles and polymer networks results in hybrid platforms suitable for drug delivery, tissue engineering, and wound healing applications.

POLYMERS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

3D Printed Wesselsite Nanosheets Functionalized Scaffold Facilitates NIR-II Photothermal Therapy and Vascularized Bone Regeneration

Chen Yang et al.

Summary: This study presents a novel multifunctional bone scaffold integrating a NIR-II photothermal conversion agent with tremendous bioactivity with polycaprolactone via 3D printing. The scaffold triggers osteosarcoma ablation and promotes cellular proliferation and osteogenic differentiation, leading to enhanced vascularized bone regeneration in vivo. This research provides a new approach for the development of therapeutic bioceramic-based multifunctional bone scaffolds for repairing tumor-induced bone defects.

ADVANCED SCIENCE (2021)

添加到收藏夹

Review Biochemistry & Molecular Biology

Hyaluronic Acid Hydrogels Crosslinked in Physiological Conditions: Synthesis and Biomedical Applications

Luis Andres Perez et al.

Summary: Hyaluronic acid (HA) hydrogels have a wide range of biomedical applications, and current research is focusing on developing methods for their production under physiological conditions. The review discusses the chemical reactions and properties involved, as well as the applications in tissue engineering and drug controlled release.

BIOMEDICINES (2021)

添加到收藏夹

Review Biochemistry & Molecular Biology

Current hydrogel advances in physicochemical and biological response-driven biomedical application diversity

Huan Cao et al.

Summary: Hydrogel, as a versatile platform, can modulate its physicochemical properties through material engineering to impact cell signaling cascades and fate. Previous studies have revealed the importance of hydrogel properties in influencing cell behaviors and cellular signaling events, providing significant implications for future biomedical applications.

SIGNAL TRANSDUCTION AND TARGETED THERAPY (2021)

添加到收藏夹

Review Biotechnology & Applied Microbiology

Natural Biomaterials and Their Use as Bioinks for Printing Tissues

Claire Benwood et al.

Summary: Extrusion bioprinting, the most common form of bioprinting, can create personalized tissues for drug testing and cancer research using various materials. This paper reviews the properties and functions of natural bioinks in hard and soft tissue engineering, highlighting the importance of multi-component bioinks and potential future research directions.

BIOENGINEERING-BASEL (2021)

添加到收藏夹

Review Biotechnology & Applied Microbiology

Protein-Based 3D Biofabrication of Biomaterials

Mahta Mirzaei et al.

Summary: Protein/peptide-based hydrogel biomaterial inks are promising for 3D printing due to their ability to incorporate various cells and mimic the extracellular matrix. Proteins contain multiple functional groups essential for filament formation and printing, with gelation process involving unfolding and aggregation into a network stabilized by noncovalent and covalent cross-links. Various proteins can be obtained from natural or synthetic sources for tissue engineering applications.

BIOENGINEERING-BASEL (2021)

添加到收藏夹

Article Materials Science, Biomaterials

A 3D cell printing-fabricated HepG2 liver spheroid model for high-content in situ quantification of drug-induced liver toxicity

Sera Hong et al.

Summary: A 3D printing-based HepG2 liver spheroid culture model was developed for in situ quantitative evaluation and high-content monitoring of drug-induced hepatotoxicity, allowing for potential screening and characterization of drug-induced liver toxicity.

BIOMATERIALS SCIENCE (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Recent advances in the synthesis of smart hydrogels

Partha Sikdar et al.

Summary: Smart hydrogels, which can react to different environmental conditions, are attracting researchers' attention for various applications. The latest developments in smart hydrogel synthesis demonstrate increasing potential for targeted applications.

MATERIALS ADVANCES (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Cell-Laden Nanocellulose/Chitosan-Based Bioinks for 3D Bioprinting and Enhanced Osteogenic Cell Differentiation

Panita Maturavongsadit et al.

Summary: 3D bioprinting using nanocellulose/chitosan-based bioink shows promising potential for bone tissue engineering and regeneration. By optimizing bioink formulations, fast gelation kinetics and shape integrity of constructs post 3D bioprinting can be achieved. The incorporation of CNCs and pre-osteoblast cells enhances the rheological and mechanical properties of the bioinks, as well as promotes osteogenesis in chitosan scaffolds.

ACS APPLIED BIO MATERIALS (2021)

添加到收藏夹

Article Biochemical Research Methods

Decellularized ECM-derived bioinks: Prospects for the future

Fatemeh Kabirian et al.

METHODS (2020)

添加到收藏夹

Article Ophthalmology

Outlooks on Three-Dimensional Printing for Ocular Biomaterials Research

Owen S. Fenton et al.

JOURNAL OF OCULAR PHARMACOLOGY AND THERAPEUTICS (2020)

添加到收藏夹

Article Engineering, Biomedical

A three-dimensional printed silk-based biomimetic tri-layered meniscus for potential patient-specific implantation

Ashutosh Bandyopadhyay et al.

BIOFABRICATION (2020)

添加到收藏夹

Article Engineering, Biomedical

Engineering bioprintable alginate/gelatin composite hydrogels with tunable mechanical and cell adhesive properties to modulate tumor spheroid growth kinetics

Tao Jiang et al.

BIOFABRICATION (2020)

添加到收藏夹

Article Engineering, Biomedical

Decellularized extracellular matrix-based bio-ink with enhanced 3D printability and mechanical properties

Min Kyeong Kim et al.

BIOFABRICATION (2020)

添加到收藏夹

Article Engineering, Biomedical

Three-dimensional printing of chemically crosslinked gelatin hydrogels for adipose tissue engineering

Nicola Contessi Negrini et al.

BIOFABRICATION (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Chondroinductive Alginate-Based Hydrogels Having Graphene Oxide for 3D Printed Scaffold Fabrication

Felipe Olate-Moya et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

A Novel Plasma-Based Bioink Stimulates Cell Proliferation and Differentiation in Bioprinted, Mineralized Constructs

Tilman Ahlfeld et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Engineering, Biomedical

Bio-inspired hydrogel composed of hyaluronic acid and alginate as a potential bioink for 3D bioprinting of articular cartilage engineering constructs

Cristina Antich et al.

ACTA BIOMATERIALIA (2020)

添加到收藏夹

Article Cell Biology

Bioprinting on sheet-based scaffolds applied to the creation of implantable tissue-engineered constructs with potentially diverse clinical applications: Tissue-Engineered Muscle Repair (TEMR) as a representative testbed

R. K. Bour et al.

CONNECTIVE TISSUE RESEARCH (2020)

添加到收藏夹

Article Biochemistry & Molecular Biology

Functional characterization of 3D contractile smooth muscle tissues generated using a unique microfluidic 3D bioprinting technology

Christopher T. D. Dickman et al.

FASEB JOURNAL (2020)

添加到收藏夹

Article Engineering, Biomedical

Cell encapsulation in gelatin bioink impairs 3D bioprinting resolution

Rachel Schwartz et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2020)

添加到收藏夹

Article Cell & Tissue Engineering

Silk-Reinforced Collagen Hydrogels with Raised Multiscale Stiffness for Mesenchymal Cells 3D Culture

Hector Sanz-Fraile et al.

TISSUE ENGINEERING PART A (2020)

添加到收藏夹

Article Cell & Tissue Engineering

Addition of Platelet-Rich Plasma to Silk Fibroin Hydrogel Bioprinting for Cartilage Regeneration

Zuxi Li et al.

TISSUE ENGINEERING PART A (2020)

添加到收藏夹

Article Cell & Tissue Engineering

Engineering and Functionalization of Gelatin Biomaterials: From Cell Culture to Medical Applications

Alvin Bacero Bello et al.

TISSUE ENGINEERING PART B-REVIEWS (2020)

添加到收藏夹

Article Chemistry, Physical

Optimization of the 3D Printing Parameters for Tensile Properties of Specimens Produced by Fused Filament Fabrication of 17-4PH Stainless Steel

Damir Godec et al.

MATERIALS (2020)

添加到收藏夹

Review Pharmacology & Pharmacy

Development of 3D bioprinting: From printing methods to biomedical applications

Zeming Gu et al.

ASIAN JOURNAL OF PHARMACEUTICAL SCIENCES (2020)

添加到收藏夹

Article Biotechnology & Applied Microbiology

3D Bioprinting Pluripotent Stem Cell Derived Neural Tissues Using a Novel Fibrin Bioink Containing Drug Releasing Microspheres

Ruchi Sharma et al.

FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Biomedical

Gelatin Templated Polypeptide Co-Cross-Linked Hydrogel for Bone Regeneration

Yusen Qiao et al.

ADVANCED HEALTHCARE MATERIALS (2020)

添加到收藏夹

Article Biochemistry & Molecular Biology

Cellulose Nanocrystal Reinforced Collagen-Based Nanocomposite Hydrogel with Self-Healing and Stress-Relaxation Properties for Cell Delivery

Shuang Zhang et al.

BIOMACROMOLECULES (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Bioprinting: From Tissue and Organ Development to in Vitro Models

Carlos Mota et al.

CHEMICAL REVIEWS (2020)

添加到收藏夹

Review Polymer Science

The swollen polymer network hypothesis: Quantitative models of hydrogel swelling, stiffness, and solute transport

Nathan R. Richbourg et al.

PROGRESS IN POLYMER SCIENCE (2020)

添加到收藏夹

Article Engineering, Biomedical

Silk fibroin hydrogel promote burn wound healing through regulating TLN1 expression and affecting cell adhesion and migration

Ying Guan et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Characterization and Application of Carboxymethyl Chitosan-Based Bioink in Cartilage Tissue Engineering

Yunfan He et al.

JOURNAL OF NANOMATERIALS (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Advanced gelatin-based vascularization bioinks for extrusion-based bioprinting of vascularized bone equivalents

A. Leucht et al.

SCIENTIFIC REPORTS (2020)

添加到收藏夹

Review Engineering, Biomedical

Advances in Extrusion 3D Bioprinting: A Focus on Multicomponent Hydrogel-Based Bioinks

Xiaolin Cui et al.

ADVANCED HEALTHCARE MATERIALS (2020)

添加到收藏夹

Article Chemistry, Medicinal

Chitosan-Gentamicin Conjugate Hydrogel Promoting Skin Scald Repair

Tingting Yan et al.

MARINE DRUGS (2020)

添加到收藏夹

Review Biochemical Research Methods

Alginate-based hydrogels as drug delivery vehicles in cancer treatment and their applications in wound dressing and 3D bioprinting

Farhad Abasalizadeh et al.

JOURNAL OF BIOLOGICAL ENGINEERING (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Polysaccharide-Based Bioink Formulation for 3D Bioprinting of an In Vitro Model of the Human Dermis

Tanja Zidaric et al.

NANOMATERIALS (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

Hydrogel-Based Bioinks for 3D Bioprinting in Tissue Regeneration

Previn Ramiah et al.

FRONTIERS IN MATERIALS (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Decellularized Extracellular Matrix-based Bioinks for Engineering Tissue- and Organ-specific Microenvironments

Byoung Soo Kim et al.

CHEMICAL REVIEWS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Melt electrowriting onto anatomically relevant biodegradable substrates: Resurfacing a diarthrodial joint

Quentin C. Peiffer et al.

MATERIALS & DESIGN (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

3D Bioprinting-Tunable Small-Diameter Blood Vessels with Biomimetic Biphasic Cell Layers

Xuan Zhou et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Engineering, Biomedical

An injectable click-crosslinked hyaluronic acid hydrogel modified with a BMP-2 mimetic peptide as a bone tissue engineering scaffold

Seung Hun Park et al.

ACTA BIOMATERIALIA (2020)

添加到收藏夹

Review Engineering, Biomedical

Advancing bioinks for 3D bioprinting using reactive fillers: A review

Susanne Heid et al.

ACTA BIOMATERIALIA (2020)

添加到收藏夹

Review Engineering, Biomedical

Strategies to use fibrinogen as bioink for 3D bioprinting fibrin-based soft and hard tissues

Bruna A. G. de Melo et al.

ACTA BIOMATERIALIA (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Human-Recombinant-Elastin-Based Bioinks for 3D Bioprinting of Vascularized Soft Tissues

Sohyung Lee et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Printability and Shape Fidelity of Bioinks in 3D Bioprinting

Andrea Schwab et al.

CHEMICAL REVIEWS (2020)

添加到收藏夹

Review Chemistry, Physical

Three-Dimensional Printing Constructs Based on the Chitosan for Tissue Regeneration: State of the Art, Developing Directions and Prospect Trends

Farnoosh Pahlevanzadeh et al.

MATERIALS (2020)

添加到收藏夹

Article Materials Science, Biomaterials

Injectable anti-inflammatory hyaluronic acid hydrogel for osteoarthritic cartilage repair

Yinji Jin et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)

添加到收藏夹

Article Polymer Science

Effects of Gelatin Methacrylate Bio-ink Concentration on Mechano-Physical Properties and Human Dermal Fibroblast Behavior

Ming-You Shie et al.

POLYMERS (2020)

添加到收藏夹

Article Polymer Science

Enzyme-Crosslinked Electrospun Fibrous Gelatin Hydrogel for Potential Soft Tissue Engineering

Kexin Nie et al.

POLYMERS (2020)

添加到收藏夹

Article Polymer Science

Kappa-Carrageenan-Based Dual Crosslinkable Bioink for Extrusion Type Bioprinting

Wonseop Lim et al.

POLYMERS (2020)

添加到收藏夹

Review Polymer Science

Bioprintability: Physiomechanical and Biological Requirements of Materials for 3D Bioprinting Processes

Andrea S. Theus et al.

POLYMERS (2020)

添加到收藏夹

Review Polymer Science

Alginate: From Food Industry to Biomedical Applications and Management of Metabolic Disorders

Roxana Gheorghita Puscaselu et al.

POLYMERS (2020)

添加到收藏夹

Article Pharmacology & Pharmacy

Development of 3D Printed Drug-Eluting Scaffolds for Preventing Piercing Infection

Emad Naseri et al.

PHARMACEUTICS (2020)

添加到收藏夹

Article Chemistry, Applied

Micro and nanocrystalline cellulose derivatives of lignocellulosic biomass: A review on synthesis, applications and advancements

Dibyajyoti Haldar et al.

CARBOHYDRATE POLYMERS (2020)

添加到收藏夹

Article Biochemistry & Molecular Biology

Microwave assisted methacrylation of Kappa carrageenan: A bioink for cartilage tissue engineering

Gulnihal Tok Ilhan et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)

添加到收藏夹

Review Biochemistry & Molecular Biology

Chitosan and Cellulose-Based Hydrogels for Wound Management

Sibusiso Alven et al.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Injectable cell-laden poly(N-isopropylacrylamide)/chitosan hydrogel reinforced via graphene oxide and incorporated with dual-growth factors

Lei Nie et al.

MATERIALS LETTERS (2020)

添加到收藏夹

Review Polymer Science

Current Advances in 3D Bioprinting Technology and Its Applications for Tissue Engineering

JunJie Yu et al.

POLYMERS (2020)

添加到收藏夹

Article Materials Science, Biomaterials

Three-Dimensional Bioprinted Hyaluronic Acid Hydrogel Test Beds for Assessing Neural Cell Responses to Competitive Growth Stimuli

Tran B. Ngo et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2020)

添加到收藏夹

Article Pharmacology & Pharmacy

3D-Printed Veterinary Dosage Forms-A Comparative Study of Three Semi-Solid Extrusion 3D Printers

Erica Sjoholm et al.

PHARMACEUTICS (2020)

添加到收藏夹

Article

Three-dimensional printing of stimuli-responsive hydrogel with antibacterial activity

Srikanthan Ramesh et al.

Bioprinting (2020)

添加到收藏夹

Article Biotechnology & Applied Microbiology

Advanced Bioink for 3D Bioprinting of Complex Free-Standing Structures with High Stiffness

Yawei Gu et al.

BIOENGINEERING-BASEL (2020)

添加到收藏夹

Article Cell & Tissue Engineering

Engineering 3D degradable, pliable scaffolds toward adipose tissue regeneration; optimized printability, simulations and surface modification

Shubham Jain et al.

JOURNAL OF TISSUE ENGINEERING (2020)

添加到收藏夹

Article Engineering, Biomedical

Tissue mimetic hyaluronan bioink containing collagen fibers with controlled orientation modulating cell migration and alignment

A. Schwab et al.

MATERIALS TODAY BIO (2020)

添加到收藏夹

Article Materials Science, Biomaterials

3D printing of high-strength chitosan hydrogel scaffolds without any organic solvents

Luyu Zhou et al.

BIOMATERIALS SCIENCE (2020)

添加到收藏夹

Article Chemistry, Applied

Facile formation of agarose hydrogel and electromechanical responses as electro-responsive hydrogel materials in actuator applications

Kornkanok Rotjanasuworapong et al.

CARBOHYDRATE POLYMERS (2020)

添加到收藏夹

Article Cell Biology

Three-dimensional bioprinting collagen/silk fibroin scaffold combined with neural stem cells promotes nerve regeneration after spinal cord injury

Ji-Peng Jiang et al.

NEURAL REGENERATION RESEARCH (2020)

添加到收藏夹

Review Engineering, Biomedical

Hyaluronic acid as a bioink for extrusion-based 3D printing

D. Petta et al.

BIOFABRICATION (2020)

添加到收藏夹

Review Biotechnology & Applied Microbiology

Additive Biomanufacturing with Collagen Inks

Weng Wan Chan et al.

BIOENGINEERING-BASEL (2020)

添加到收藏夹

Review Biotechnology & Applied Microbiology

3D Bioprinting Strategies for the Regeneration of Functional Tubular Tissues and Organs

Hun-Jin Jeong et al.

BIOENGINEERING-BASEL (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Biodegradable and biocompatible agarose-poly (vinyl alcohol) hydrogel for the in vitro investigation of ibuprofen release

Pranjali Date et al.

CHEMICAL PAPERS (2020)

添加到收藏夹

Article Engineering, Biomedical

The bioprinting roadmap

Wei Sun et al.

BIOFABRICATION (2020)

添加到收藏夹

Review Engineering, Biomedical

Vat polymerization-based bioprinting-process, materials, applications and regulatory challenges

Wei Long Ng et al.

BIOFABRICATION (2020)

添加到收藏夹

Article Biotechnology & Applied Microbiology

Formulation and Characterization of Alginate Dialdehyde, Gelatin, and Platelet-Rich Plasma-Based Bioink for Bioprinting Applications

Lakshmi T. Somasekharan et al.

BIOENGINEERING-BASEL (2020)

添加到收藏夹

Article Engineering, Biomedical

A 3D cell printed muscle construct with tissue-derived bioink for the treatment of volumetric muscle loss

Yeong-Jin Choi et al.

BIOMATERIALS (2019)

添加到收藏夹

Article Engineering, Biomedical

Viscoll collagen solution as a novel bioink for direct 3D bioprinting

Egor O. Osidak et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2019)

添加到收藏夹

Review Engineering, Biomedical

Collagen-based bioinks for hard tissue engineering applications: a comprehensive review

C. F. Marques et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2019)

添加到收藏夹

Article Biochemistry & Molecular Biology

Gelatin-Based Hydrogels through Homobifunctional Triazolinediones Targeting Tyrosine Residues

Roberto Guizzardi et al.

MOLECULES (2019)

添加到收藏夹

Article Engineering, Biomedical

Printability of pulp derived crystal, fibril and blend nanocellulose-alginate bioinks for extrusion 3D bioprinting

Zita M. Jessop et al.

BIOFABRICATION (2019)

添加到收藏夹

Article Engineering, Biomedical

A Photo-Crosslinkable Kidney ECM-Derived Bioink Accelerates Renal Tissue Formation

Mohamed Ali et al.

ADVANCED HEALTHCARE MATERIALS (2019)

添加到收藏夹

Article Polymer Science

Formulation and Characterization of a SIS-Based Photocrosslinkable Bioink

Julian A. Serna et al.

POLYMERS (2019)

添加到收藏夹

Article Biochemistry & Molecular Biology

Effect of cross-linking on the dimensional stability and biocompatibility Check tor of a tailored 3D-bioprinted gelatin scaffold

Dong Jin Choi et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2019)

添加到收藏夹

Article Engineering, Biomedical

Thermally-controlled extrusion-based bioprinting of collagen

Kazim K. Moncal et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2019)

添加到收藏夹

Article Polymer Science

Strain-Stiffening of Agarose Gels

Kia Bertula et al.

ACS MACRO LETTERS (2019)

添加到收藏夹

Article Engineering, Biomedical

A bioink blend for rotary 3D bioprinting tissue engineered small-diameter vascular constructs

Sebastian Freeman et al.

ACTA BIOMATERIALIA (2019)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Effects of 3-dimensional Bioprinting Alginate/Gelatin Hydrogel Scaffold Extract on Proliferation and Differentiation of Human Dental Pulp Stem Cells

Haiyue Yu et al.

JOURNAL OF ENDODONTICS (2019)

添加到收藏夹

Article Materials Science, Ceramics

Additive Manufacturing of ceramic components by Digital Light Processing: A comparison between the bottom-up and the top-down approaches

Oscar Santoliquido et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

添加到收藏夹

Article Engineering, Biomedical

High density cell seeding affects the rheology and printability of collagen bioinks

Nicole Diamantides et al.

BIOFABRICATION (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Dual stem cell therapy synergistically improves cardiac function and vascular regeneration following myocardial infarction

Soon-Jung Park et al.

NATURE COMMUNICATIONS (2019)

添加到收藏夹

Article Multidisciplinary Sciences

A 3D bioprinter platform for mechanistic analysis of tumoroids and chimeric mammary organoids

John A. Reid et al.

SCIENTIFIC REPORTS (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Hydrogel Bioink with Multilayered Interfaces Improves Dispersibility of Encapsulated Cells in Extrusion Bioprinting

Nan Chen et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Engineering, Biomedical

3D bioprinted endometrial stem cells on melt electrospun poly ε-caprolactone mesh for pelvic floor application promote anti-inflammatory responses in mice

Kallyanashis Paul et al.

ACTA BIOMATERIALIA (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Volumetric Bioprinting of Complex Living-Tissue Constructs within Seconds

Paulina Nunez Bernal et al.

ADVANCED MATERIALS (2019)

添加到收藏夹

Review Biochemistry & Molecular Biology

Recent Trends in Decellularized Extracellular Matrix Bioinks for 3D Printing: An Updated Review

Kevin Dzobo et al.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2019)

添加到收藏夹

Article Materials Science, Biomaterials

被撤回的出版物: Rubidium-Containing Calcium Alginate Hydrogel for Antibacterial and Diabetic Skin Wound Healing Applications (Retracted article. See vol. 7, pg. 2858, 2021)

Xiang He et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2019)

添加到收藏夹

Article Materials Science, Biomaterials

Coaxial Extrusion of Tubular Tissue Constructs Using a Gelatin/GeIMA Blend Bioink

Ying Wang et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Biomanufacturing of organ-specific tissues with high cellular density and embedded vascular channels

Mark A. Skylar-Scott et al.

SCIENCE ADVANCES (2019)

添加到收藏夹

Review Pharmacology & Pharmacy

Strategies for Hyaluronic Acid-Based Hydrogel Design in Drug Delivery

Sonia Trombino et al.

PHARMACEUTICS (2019)

添加到收藏夹

Article Biotechnology & Applied Microbiology

Numerical Investigations of Hepatic Spheroids Metabolic Reactions in a Perfusion Bioreactor

Fatemeh Sharifi et al.

FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY (2019)

添加到收藏夹

Article Chemistry, Applied

Facile formation of salecan/agarose hydrogels with tunable structural properties for cell culture

Xiaoliang Qi et al.

CARBOHYDRATE POLYMERS (2019)

添加到收藏夹

Article Engineering, Biomedical

Enhanced rheological behaviors of alginate hydrogels with carrageenan for extrusion-based bioprinting

Myoung Hwan Kim et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Voxelated soft matter via multimaterial multinozzle 3D printing

Mark A. Skylar-Scott et al.

NATURE (2019)

添加到收藏夹

Review Chemistry, Physical

Smart Hydrogels in Tissue Engineering and Regenerative Medicine

Somasundar Mantha et al.

MATERIALS (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Cell alignment and accumulation using acoustic nozzle for bioprinting

Yannapol Sriphutkiat et al.

SCIENTIFIC REPORTS (2019)

添加到收藏夹

Article Chemistry, Applied

Antibacterial poly (3,4-ethylenedioxythiophene): poly(styrene-sulfonate)/agarose nanocomposite hydrogels with thermo-processability and self-healing

Youngsang Ko et al.

CARBOHYDRATE POLYMERS (2019)

添加到收藏夹

Article Biophysics

Hyaluronic acid-based hydrogels with independently tunable mechanical and bioactive signaling features

Madison D. Godesky et al.

BIOINTERPHASES (2019)

添加到收藏夹

Article Materials Science, Biomaterials

Chitosan-based embolizing hydrogel for the treatment of endoleaks after endovascular aneurysm repair

Ahmed Fatimi

INTERNATIONAL JOURNAL OF POLYMERIC MATERIALS AND POLYMERIC BIOMATERIALS (2019)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Optimization of 3D bioprinting of periodontal ligament cells

Nimal Thattaruparambil Raveendran et al.

DENTAL MATERIALS (2019)

添加到收藏夹

Review Materials Science, Ceramics

3D printing of ceramics: A review

Zhangwei Chen et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

添加到收藏夹

Article Hematology

Chronic liver injury drives non-traditional intrahepatic fibrin(ogen) crosslinking via tissue transglutaminase

L. G. Poole et al.

JOURNAL OF THROMBOSIS AND HAEMOSTASIS (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Bioprinted liver provides early insight into the role of Kupffer cells in TGF-β1 and methotrexate-induced fibrogenesis

Leah M. Norona et al.

PLOS ONE (2019)

添加到收藏夹

Article Materials Science, Biomaterials

3D Printing of Neural Tissues Derived from Human Induced Pluripotent Stem Cells Using a Fibrin-Based Bioink

Emily Abelseth et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2019)

添加到收藏夹

Article Materials Science, Biomaterials

3D cell printing of islet-laden pancreatic tissue-derived extracellular matrix bioink constructs for enhancing pancreatic functions

Jaewook Kim et al.

JOURNAL OF MATERIALS CHEMISTRY B (2019)

添加到收藏夹

Article Biochemical Research Methods

Effective bioprinting resolution in tissue model fabrication

Amir K. Miri et al.

LAB ON A CHIP (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Bioprinting a novel glioblastoma tumor model using a fibrin-based bioink for drug screening

C. Lee et al.

MATERIALS TODAY CHEMISTRY (2019)

添加到收藏夹

Article Cell & Tissue Engineering

Bioprinting of three-dimensional dentin-pulp complex with local differentiation of human dental pulp stem cells

Jonghyeuk Han et al.

JOURNAL OF TISSUE ENGINEERING (2019)

添加到收藏夹

Article Engineering, Biomedical

A definition of bioinks and their distinction from biomaterial inks

J. Groll et al.

BIOFABRICATION (2019)

添加到收藏夹

Article Biotechnology & Applied Microbiology

Biofabrication of Bacterial Constructs: New Three-Dimensional Biomaterials

Amin Shavandi et al.

BIOENGINEERING-BASEL (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

3D printable SiO2 nanoparticle ink for patient specific bone regeneration

Uday Kiran Roopavath et al.

RSC ADVANCES (2019)

添加到收藏夹

Article Materials Science, Biomaterials

Bioprinting Schwann cell-laden scaffolds from low-viscosity hydrogel compositions

Liqun Ning et al.

JOURNAL OF MATERIALS CHEMISTRY B (2019)

添加到收藏夹

Review Engineering, Biomedical

Recent advances in biomaterials for 3D scaffolds: A review

Maria P. Nikolova et al.

BIOACTIVE MATERIALS (2019)

添加到收藏夹

Article Engineering, Biomedical

3D printable hyaluronic acid-based hydrogel for its potential application as a bioink in tissue engineering

Insup Noh et al.

BIOMATERIALS RESEARCH (2019)

添加到收藏夹

Article Engineering, Biomedical

3D bioprinted functional and contractile cardiac tissue constructs

Zhan Wang et al.

ACTA BIOMATERIALIA (2018)

添加到收藏夹

Review Pharmacology & Pharmacy

3D bioprinting of tissues and organs for regenerative medicine

Sanjairaj Vijayavenkataraman et al.

ADVANCED DRUG DELIVERY REVIEWS (2018)

添加到收藏夹

Article Biochemistry & Molecular Biology

Rubbery Chitosan/Carrageenan Hydrogels Constructed through an Electroneutrality System and Their Potential Application as Cartilage Scaffolds

Xichao Liang et al.

BIOMACROMOLECULES (2018)

添加到收藏夹

Article Biochemistry & Molecular Biology

Visible Light-Induced Hydrogelation of an Alginate Derivative and Application to Stereolithographic Bioprinting Using a Visible Light Projector and Acid Red

Shinji Sakai et al.

BIOMACROMOLECULES (2018)

添加到收藏夹

Article Engineering, Biomedical

3D cell printing of in vitro stabilized skin model and in vivo pre-vascularized skin patch using tissue-specific extracellular matrix bioink: A step towards advanced skin tissue engineering

Byoung Soo Kim et al.

BIOMATERIALS (2018)

添加到收藏夹

Review Chemistry, Applied

Agarose-based biomaterials for tissue engineering

Payam Zarrintaj et al.

CARBOHYDRATE POLYMERS (2018)

添加到收藏夹

Review Chemistry, Applied

Carrageenan based hydrogels for drug delivery, tissue engineering and wound healing

Ramanathan Yegappan et al.

CARBOHYDRATE POLYMERS (2018)

添加到收藏夹

Article Materials Science, Ceramics

Development and characterizations of novel aqueous-based LSCF suspensions for inkjet printing

Zhangwei Chen et al.

CERAMICS INTERNATIONAL (2018)

添加到收藏夹

Article Biochemistry & Molecular Biology

Hydroxyethyl cellulose hydrogel for wound dressing: Fabrication, characterization and in vitro evaluation

Gomaa F. El Fawal et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2018)

添加到收藏夹

Article Engineering, Biomedical

Injectable hydroxyphenyl derivative of hyaluronic acid hydrogel modified with RGD as scaffold for spinal cord injury repair

Kristyna Zaviskova et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2018)

添加到收藏夹

Article Engineering, Biomedical

Three-dimensional extrusion bioprinting of single- and double-network hydrogels containing dynamic covalent crosslinks

Leo L. Wang et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2018)

添加到收藏夹

Article Biochemistry & Molecular Biology

Chitosan-Based Thermo/pH Double Sensitive Hydrogel for Controlled Drug Delivery

Xiaoyu Bai et al.

MACROMOLECULAR BIOSCIENCE (2018)

添加到收藏夹

Editorial Material Biochemical Research Methods

Organoids

Natalie de Souza

NATURE METHODS (2018)

添加到收藏夹

Article Chemistry, Physical

3D Printability of Alginate-Carboxymethyl Cellulose Hydrogel

Ahasan Habib et al.

MATERIALS (2018)

添加到收藏夹

Article Engineering, Biomedical

3D Bioprinting of Self-Standing Silk-Based Bioink

Zhaozhu Zheng et al.

ADVANCED HEALTHCARE MATERIALS (2018)

添加到收藏夹

Article Engineering, Biomedical

Soy Protein/Cellulose Nanofiber Scaffolds Mimicking Skin Extracellular Matrix for Enhanced Wound Healing

Seungkuk Ahn et al.

ADVANCED HEALTHCARE MATERIALS (2018)

添加到收藏夹

Review Materials Science, Biomaterials

Bioinks for 3D bioprinting: an overview

P. Selcan Gungor-Ozkerim et al.

BIOMATERIALS SCIENCE (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Bioprinting of Cartilage and Skin Tissue Analogs Utilizing a Novel Passive Mixing Unit Technique for Bioink Precellularization

Patrick Scott Thayer et al.

JOVE-JOURNAL OF VISUALIZED EXPERIMENTS (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

Biocompatibility Pathways in Tissue-Engineering Templates

David F. Williams

ENGINEERING (2018)

添加到收藏夹

Article Chemistry, Medicinal

The Cocktail Effect of BMP-2 and TGF-1 Loaded in Visible Light-Cured Glycol Chitosan Hydrogels for the Enhancement of Bone Formation in a Rat Tibial Defect Model

Sun-Jung Yoon et al.

MARINE DRUGS (2018)

添加到收藏夹

Article Cell & Tissue Engineering

Development and Evaluation of Hyaluronic Acid-Based Hybrid Bio-Ink for Tissue Regeneration

Jaeyeon Lee et al.

TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2018)

添加到收藏夹

Review Chemistry, Physical

Three-Dimensional Bioprinting of Cartilage by the Use of Stem Cells: A Strategy to Improve Regeneration

Livia Roseti et al.

MATERIALS (2018)

添加到收藏夹

Article Materials Science, Biomaterials

Agarose-Based Hydrogels as Suitable Bioprinting Materials for Tissue Engineering

Gabriel R. Lopez-Marcial et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2018)

添加到收藏夹

Article Materials Science, Biomaterials

Developmental Biology-Inspired Strategies To Engineer 3D Bioprinted Bone Construct

Shikha Chawla et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Fabrication of scaffold-free tubular cardiac constructs using a Bio-3D printer

Kenichi Arai et al.

PLOS ONE (2018)

添加到收藏夹

Article Engineering, Biomedical

Optimization of gelatin-alginate composite bioink printability using rheological parameters: a systematic approach

Teng Gao et al.

BIOFABRICATION (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Bioprinted 3D Primary Human Intestinal Tissues Model Aspects of Native Physiology and ADME/Tox Functions

Lauran R. Madden et al.

ISCIENCE (2018)

添加到收藏夹

Review Engineering, Biomedical

The arrival of commercial bioprinters - Towards 3D bioprinting revolution!

Deepak Choudhury et al.

INTERNATIONAL JOURNAL OF BIOPRINTING (2018)

添加到收藏夹

Article Engineering, Biomedical

Proof-of-concept: 3D bioprinting of pigmented human skin constructs

Wei Long Ng et al.

BIOFABRICATION (2018)

添加到收藏夹

Article Engineering, Biomedical

Tyrosinase-doped bioink for 3D bioprinting of living skin constructs

Y. Shi et al.

BIOMEDICAL MATERIALS (2018)

添加到收藏夹

Article Engineering, Biomedical

Bioprinted chitosan-gelatin thermosensitive hydrogels using an inexpensive 3D printer

Kevin D. Roehm et al.

BIOFABRICATION (2018)

添加到收藏夹

Article Engineering, Biomedical

Assessing bioink shape fidelity to aid material development in 3D bioprinting

A. Ribeiro et al.

BIOFABRICATION (2018)

添加到收藏夹

Article Engineering, Biomedical

3D bioprinting of scaffolds with living Schwann cells for potential nerve tissue engineering applications

Liqun Ning et al.

BIOFABRICATION (2018)

添加到收藏夹

Article Engineering, Manufacturing

The Development of Gelatin-Based Bio-Ink for Use in 3D Hybrid Bioprinting

Jung Hwal Shin et al.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING (2018)

添加到收藏夹

Article Biochemistry & Molecular Biology

Quantification of Substitution of Gelatin Methacryloyl: Best Practice and Current Pitfalls

Christiane Claassen et al.

BIOMACROMOLECULES (2018)

添加到收藏夹

Article Engineering, Biomedical

3D Bioprinting for Tissue and Organ Fabrication

Yu Shrike Zhang et al.

ANNALS OF BIOMEDICAL ENGINEERING (2017)

添加到收藏夹

Article Chemistry, Physical

Instrumented cardiac microphysiological devices via multimaterial three-dimensional printing

Johan U. Lind et al.

NATURE MATERIALS (2017)

添加到收藏夹

Article Engineering, Biomedical

Single Cell Microgel Based Modular Bioinks for Uncoupled Cellular Micro- and Macroenvironments

Tom Kamperman et al.

ADVANCED HEALTHCARE MATERIALS (2017)

添加到收藏夹

Article Engineering, Manufacturing

Modeling the Flow Behavior and Flow Rate of Medium Viscosity Alginate for Scaffold Fabrication With a Three-Dimensional Bioplotter

Md. Sarker et al.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Progress in three-dimensional bioprinting

Adam W. Feinberg et al.

MRS BULLETIN (2017)

添加到收藏夹

Article Biochemical Research Methods

Shear-thinning and self-healing hydrogels as injectable therapeutics and for 3D-printing

Claudia Loebel et al.

NATURE PROTOCOLS (2017)

添加到收藏夹

Article Cell & Tissue Engineering

Three-Dimensional Printing and Angiogenesis: Tailored Agarose-Type I Collagen Blends Comprise Three-Dimensional Printability and Angiogenesis Potential for Tissue-Engineered Substitutes

Franziska Kreimendahl et al.

TISSUE ENGINEERING PART C-METHODS (2017)

添加到收藏夹

Article Engineering, Biomedical

Mechanically Tunable Bioink for 3D Bioprinting of Human Cells

Aurelien Forget et al.

ADVANCED HEALTHCARE MATERIALS (2017)

添加到收藏夹

Article Engineering, Biomedical

3D Bioprinting Human Induced Pluripotent Stem Cell Constructs for In Situ Cell Proliferation and Successive Multilineage Differentiation

Qi Gu et al.

ADVANCED HEALTHCARE MATERIALS (2017)

添加到收藏夹

Review Polymer Science

Gelatin-Based Hydrogels for Organ 3D Bioprinting

Xiaohong Wang et al.

POLYMERS (2017)

添加到收藏夹

Review Materials Science, Biomaterials

Viscoelastic hydrogels for 3D cell culture

Ovijit Chaudhuri

BIOMATERIALS SCIENCE (2017)

添加到收藏夹

Article Cell & Tissue Engineering

Gelatin-based hydrogel for vascular endothelial growth factor release in peripheral nerve tissue engineering

S. Gnavi et al.

JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2017)

添加到收藏夹

Article Multidisciplinary Sciences

In situ printing of mesenchymal stromal cells, by laser-assisted bioprinting, for in vivo bone regeneration applications

Virginie Keriquel et al.

SCIENTIFIC REPORTS (2017)

添加到收藏夹

Article Multidisciplinary Sciences

Handheld Co-Axial Bioprinting: Application to in situ surgical cartilage repair

Serena Duchi et al.

SCIENTIFIC REPORTS (2017)

添加到收藏夹

Article Multidisciplinary Sciences

High-Resolution Patterned Cellular Constructs by Droplet-Based 3D Printing

Alexander D. Graham et al.

SCIENTIFIC REPORTS (2017)

添加到收藏夹

Review Engineering, Manufacturing

Evaluation of bioprinter technologies

Ibrahim T. Ozbolat et al.

ADDITIVE MANUFACTURING (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Shear-Thinning and Thermo-Reversible Nanoengineered Inks for 3D Bioprinting

Scott A. Wilson et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

4D Biofabrication Using Shape-Morphing Hydrogels

Alina Kirillova et al.

ADVANCED MATERIALS (2017)

添加到收藏夹

Article Engineering, Biomedical

GelMA-collagen blends enable drop-on-demand 3D printablility and promote angiogenesis

Henrike Stratesteffen et al.

BIOFABRICATION (2017)

添加到收藏夹

Article Engineering, Biomedical

Proposal to assess printability of bioinks for extrusion-based bioprinting and evaluation of rheological properties governing bioprintability

Naomi Paxton et al.

BIOFABRICATION (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Thiol-Ene Clickable Gelatin: A Platform Bioink for Multiple 3D Biofabrication Technologies

Sarah Bertlein et al.

ADVANCED MATERIALS (2017)

添加到收藏夹

Article Engineering, Biomedical

The bio in the ink: cartilage regeneration with bioprintable hydrogels and articular cartilage-derived progenitor cells

Riccardo Levato et al.

ACTA BIOMATERIALIA (2017)

添加到收藏夹

Article Engineering, Biomedical

Decellularized extracellular matrix: a step towards the next generation source for bioink manufacturing

Byoung Soo Kim et al.

BIOFABRICATION (2017)

添加到收藏夹

Review Engineering, Biomedical

3D bioprinting of structural proteins

Malgorzata K. Wlodarczyk-Biegun et al.

BIOMATERIALS (2017)

添加到收藏夹

Article Materials Science, Biomaterials

3D Printing of Microstructured and Stretchable Chitosan Hydrogel for Guided Cell Growth

Qinghua Wu et al.

ADVANCED BIOSYSTEMS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Control of Nanoparticle Release Kinetics from 3D Printed Hydrogel Scaffolds

Bernhard Baumann et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2017)

添加到收藏夹

Article Engineering, Biomedical

3D bioprinting of functional human skin: production and in vivo analysis

Nieves Cubo et al.

BIOFABRICATION (2017)

添加到收藏夹

Review Biotechnology & Applied Microbiology

The bioink: A comprehensive review on bioprintable materials

Monika Hospodiuk et al.

BIOTECHNOLOGY ADVANCES (2017)

添加到收藏夹

Article Engineering, Biomedical

Silk based bioinks for soft tissue reconstruction using 3-dimensional (3D) printing with in vitro and in vivo assessments

Maria J. Rodriguez et al.

BIOMATERIALS (2017)

添加到收藏夹

Article Engineering, Biomedical

3D printed complex tissue construct using stem cell-laden decellularized extracellular matrix bioinks for cardiac repair

Jinah Jang et al.

BIOMATERIALS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Microfl uidic Bioprinting of Heterogeneous 3D Tissue Constructs Using Low-Viscosity Bioink

Cristina Colosi et al.

ADVANCED MATERIALS (2016)

添加到收藏夹

Article Materials Science, Ceramics

Injectable gel from squid pen chitosan for bone tissue engineering applications

Amin Shavandi et al.

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY (2016)

添加到收藏夹

Article Engineering, Biomedical

Controlling Shear Stress in 3D Bioprinting is a Key Factor to Balance Printing Resolution and Stem Cell Integrity

Andreas Blaeser et al.

ADVANCED HEALTHCARE MATERIALS (2016)

添加到收藏夹

Article Instruments & Instrumentation

Riboflavin-induced photo-crosslinking of collagen hydrogel and its application in meniscus tissue engineering

Jiseung Heo et al.

DRUG DELIVERY AND TRANSLATIONAL RESEARCH (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Strategy to Achieve Highly Porous/Biocompatible Macroscale Cell Blocks, Using a Collagen/Genipin-bioink and an Optimal 3D Printing Process

Yong Bok Kim et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Potential of Agarose/Silk Fibroin Blended Hydrogel for in Vitro Cartilage Tissue Engineering

Yogendra Pratap Singh et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

添加到收藏夹

Review Engineering, Biomedical

Silk protein-based hydrogels: Promising advanced materials for biomedical applications

Sonia Kapoor et al.

ACTA BIOMATERIALIA (2016)

添加到收藏夹

Review Engineering, Biomedical

A comprehensive review on droplet-based bioprinting: Past, present and future

Hemanth Gudapati et al.

BIOMATERIALS (2016)

添加到收藏夹

Review Engineering, Biomedical

Current advances and future perspectives in extrusion-based bioprinting

Ibrahim T. Ozbolat et al.

BIOMATERIALS (2016)

添加到收藏夹

Review Biotechnology & Applied Microbiology

3D bioprinting for engineering complex tissues

Christian Mandrycky et al.

BIOTECHNOLOGY ADVANCES (2016)

添加到收藏夹

Review Cell & Tissue Engineering

Engineering Stem Cell Organoids

Xiaolei Yin et al.

CELL STEM CELL (2016)

添加到收藏夹

Review Biochemistry & Molecular Biology

Articular cartilage tissue engineering: the role of signaling molecules

Heenam Kwon et al.

CELLULAR AND MOLECULAR LIFE SCIENCES (2016)

添加到收藏夹

Article Engineering, Biomedical

Synthesis of stiffness-tunable and cell-responsive Gelatin-poly(ethylene glycol) hydrogel for three-dimensional cell encapsulation

Ye Cao et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2016)

添加到收藏夹

Review Biochemistry & Molecular Biology

Bioprinting and Differentiation of Stem Cells

Scott A. Irvine et al.

MOLECULES (2016)

添加到收藏夹

Review Biochemistry & Molecular Biology

Polysaccharides from the Marine Environment with Pharmacological, Cosmeceutical and Nutraceutical Potential

Nadia Ruocco et al.

MOLECULES (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Osteogenic Differentiation of Three-Dimensional Bioprinted Constructs Consisting of Human Adipose-Derived Stem Cells In Vitro and In Vivo

Xiao-Fei Wang et al.

PLOS ONE (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Deterministically patterned biomimetic human iPSC-derived hepatic model via rapid 3D bioprinting

Xuanyi Ma et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2016)

添加到收藏夹

Review Biotechnology & Applied Microbiology

Advances in Bioprinting Technologies for Craniofacial Reconstruction

Dafydd O. Visscher et al.

TRENDS IN BIOTECHNOLOGY (2016)

添加到收藏夹

Review Biotechnology & Applied Microbiology

4D Bioprinting for Biomedical Applications

Bin Gao et al.

TRENDS IN BIOTECHNOLOGY (2016)

添加到收藏夹

Article Materials Science, Biomaterials

Preparation and characterization of a biodegradable polyurethane hydrogel and the hybrid gel with soy protein for 3D cell-laden bioprinting

Hsin-Hua Lin et al.

JOURNAL OF MATERIALS CHEMISTRY B (2016)

添加到收藏夹

Article Materials Science, Biomaterials

3D-Bioprinting of Polylactic Acid (PLA) Nanofiber-Alginate Hydrogel Bioink Containing Human Adipose-Derived Stem Cells

Lokesh Karthik Narayanan et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)

添加到收藏夹

Review Materials Science, Biomaterials

Designing Biomaterials for 3D Printing

Murat Guvendiren et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)

添加到收藏夹

Article Materials Science, Biomaterials

3D-Bioprinting of Polylactic Acid (PLA) Nanofiber-Alginate Hydrogel Bioink Containing Human Adipose-Derived Stem Cells

Lokesh Karthik Narayanan et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)

添加到收藏夹

Review Materials Science, Biomaterials

Designing Biomaterials for 3D Printing

Murat Guvendiren et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2016)

添加到收藏夹

Article Medicine, General & Internal

Design of a Bioartificial Pancreas+

Emmanuel C. Opara et al.

JOURNAL OF INVESTIGATIVE MEDICINE (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Bioprinted 3D Primary Liver Tissues Allow Assessment of Organ-Level Response to Clinical Drug Induced Toxicity In Vitro

Deborah G. Nguyen et al.

PLOS ONE (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Bioprinting three-dimensional cell-laden tissue constructs with controllable degradation

Zhengjie Wu et al.

SCIENTIFIC REPORTS (2016)

添加到收藏夹

Article Engineering, Biomedical

Polyelectrolyte gelatin-chitosan hydrogel optimized for 3D bioprinting in skin tissue engineering

Wei Long Ng et al.

INTERNATIONAL JOURNAL OF BIOPRINTING (2016)

添加到收藏夹

Article Engineering, Biomedical

Three-dimensional bioprinting of multilayered constructs containing human mesenchymal stromal cells for osteochondral tissue regeneration in the rabbit knee joint

Jin-Hyung Shim et al.

BIOFABRICATION (2016)

添加到收藏夹

Article Engineering, Biomedical

Development of the Biopen: a handheld device for surgical printing of adipose stem cells at a chondral wound site

Cathal D. O'Connell et al.

BIOFABRICATION (2016)

添加到收藏夹

Article Engineering, Biomedical

A comparison of different bioinks for 3D bioprinting of fibrocartilage and hyaline cartilage

Andrew C. Daly et al.

BIOFABRICATION (2016)

添加到收藏夹

Review Biochemistry & Molecular Biology

Applications of Alginate-Based Bioinks in 3D Bioprinting

Eneko Axpe et al.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2016)

添加到收藏夹

Article Engineering, Biomedical

Effect of bioink properties on printability and cell viability for 3D bioplotting of embryonic stem cells

Liliang Ouyang et al.

BIOFABRICATION (2016)

添加到收藏夹

Article Engineering, Biomedical

Yield stress determines bioprintability of hydrogels based on gelatin-methacryloyl and gellan gum for cartilage bioprinting

Vivian H. M. Mouser et al.

BIOFABRICATION (2016)

添加到收藏夹

Review Engineering, Biomedical

Bioink properties before, during and after 3D bioprinting

Katja Hoelzl et al.

BIOFABRICATION (2016)

添加到收藏夹

Article Engineering, Biomedical

A hydrogel bioink toolkit for mimicking native tissue biochemical and mechanical properties in bioprinted tissue constructs

Aleksander Skardal et al.

ACTA BIOMATERIALIA (2015)

添加到收藏夹

Article Engineering, Biomedical

Bioprintable, cell-laden silk fibroin-gelatin hydrogel supporting multilineage differentiation of stem cells for fabrication of three-dimensional tissue constructs

Sanskrita Das et al.

ACTA BIOMATERIALIA (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Multimaterial Bioink Method for 3D Printing Tunable, Cell-Compatible Hydrogels

Alexandra L. Rutz et al.

ADVANCED MATERIALS (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Biofabrication of Cell-Loaded 3D Spider Silk Constructs

Kristin Schacht et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2015)

添加到收藏夹

Article Biochemistry & Molecular Biology

3D Bioprinting Human Chondrocytes with Nanocellulose-Alginate Bioink for Cartilage Tissue Engineering Applications

Kajsa Markstedt et al.

BIOMACROMOLECULES (2015)

添加到收藏夹

Article Engineering, Biomedical

Coaxial nozzle-assisted 3D bioprinting with built-in microchannels for nutrients delivery

Qing Gao et al.

BIOMATERIALS (2015)

添加到收藏夹

Article Chemistry, Applied

Rheological study of reinforcement of agarose hydrogels by cellulose nanowhiskers

Kevin J. Le Goff et al.

CARBOHYDRATE POLYMERS (2015)

添加到收藏夹

Article Biochemistry & Molecular Biology

Bio-mimetic composite scaffold from mussel shells, squid pen and crab chitosan for bone tissue engineering

Amin Shavandi et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2015)

添加到收藏夹

Article Pharmacology & Pharmacy

Evaluation of a newly developed HPMC ophthalmic insert with sustained release properties as a carrier for thermolabile therapeutics

Arnout Everaert et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2015)

添加到收藏夹

Review Chemistry, Multidisciplinary

Silk as a potential candidate for bone tissue engineering

Fatemeh Mottaghitalab et al.

JOURNAL OF CONTROLLED RELEASE (2015)

添加到收藏夹

Article Biophysics

MODELING MECHANICAL CELL DAMAGE IN THE BIOPRINTING PROCESS EMPLOYING A CONICAL NEEDLE

Minggan Li et al.

JOURNAL OF MECHANICS IN MEDICINE AND BIOLOGY (2015)

添加到收藏夹

Article Polymer Science

Mechanically Tailored Agarose Hydrogels through Molecular Alloying with β-Sheet Polysaccharides

Aurelien Forget et al.

MACROMOLECULAR RAPID COMMUNICATIONS (2015)

添加到收藏夹

Article Multidisciplinary Sciences

Engineering an in vitro air-blood barrier by 3D bioprinting

Lenke Horvath et al.

SCIENTIFIC REPORTS (2015)

添加到收藏夹

Article Engineering, Biomedical

Freeform drop-on-demand laser printing of 3D alginate and cellular constructs

Ruitong Xiong et al.

BIOFABRICATION (2015)

添加到收藏夹

Article Engineering, Biomedical

Bioprinting of human pluripotent stem cells and their directed differentiation into hepatocyte-like cells for the generation of mini-livers in 3D

Alan Faulkner-Jones et al.

BIOFABRICATION (2015)

添加到收藏夹

Article Engineering, Biomedical

Concentric bioprinting of alginate-based tubular constructs using multi-nozzle extrusion-based technique

Edgar Y. S. Tan et al.

INTERNATIONAL JOURNAL OF BIOPRINTING (2015)

添加到收藏夹

Article Mathematics, Interdisciplinary Applications

Computational Approach to 3D Modeling of the Lymph Node Geometry

Alexey Kislitsyn et al.

COMPUTATION (2015)

添加到收藏夹

Article Engineering, Biomedical

Tissue-Engineered Tracheal Reconstruction Using Three-Dimensionally Printed Artificial Tracheal Graft: Preliminary Report

Jae Won Chang et al.

ARTIFICIAL ORGANS (2014)

添加到收藏夹

Article Engineering, Biomedical

Engineering a morphogenetically active hydrogel for bioprinting of bioartificial tissue derived from human osteoblast-like SaOS-2 cells

Meik Neufurth et al.

BIOMATERIALS (2014)

添加到收藏夹

Article Engineering, Biomedical

Stable corneal regeneration four years after implantation of a cell-free recombinant human collagen scaffold

Per Fagerholm et al.

BIOMATERIALS (2014)

添加到收藏夹

Review Biochemistry & Molecular Biology

Collagen-Based Biomaterials for Wound Healing

Sayani Chattopadhyay et al.

BIOPOLYMERS (2014)

添加到收藏夹

Review Chemistry, Applied

Carrageenan and its applications in drug delivery

Liang Li et al.

CARBOHYDRATE POLYMERS (2014)

添加到收藏夹

Article Engineering, Biomedical

Evaluation of the in vitro and in vivo biocompatibility of carrageenan-based hydrogels

Elena G. Popa et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2014)

添加到收藏夹

Review Chemistry, Multidisciplinary

Gelatin carriers for drug and cell delivery in tissue engineering

Marco Santoro et al.

JOURNAL OF CONTROLLED RELEASE (2014)

添加到收藏夹

Article Biochemistry & Molecular Biology

Cell Adhesion Behavior in 3D Hydrogel Scaffolds Functionalized with D- or L-Aminoacids

Kathrin Benson et al.

MACROMOLECULAR BIOSCIENCE (2014)

添加到收藏夹

Review Biotechnology & Applied Microbiology

3D bioprinting of tissues and organs

Sean V. Murphy et al.

NATURE BIOTECHNOLOGY (2014)

添加到收藏夹

Review Multidisciplinary Sciences

Organogenesis in a dish: Modeling development and disease using organoid technologies

Madeline A. Lancaster et al.

SCIENCE (2014)

添加到收藏夹

Article Cell & Tissue Engineering

Design and Fabrication of Human Skin by Three-Dimensional Bioprinting

Vivian Lee et al.

TISSUE ENGINEERING PART C-METHODS (2014)

添加到收藏夹

Article Engineering, Biomedical

Biofabrication of tissue constructs by 3D bioprinting of cell-laden microcarriers

Riccardo Levato et al.

BIOFABRICATION (2014)

添加到收藏夹

Article Multidisciplinary Sciences

Printing three-dimensional tissue analogues with decellularized extracellular matrix bioink

Falguni Pati et al.

NATURE COMMUNICATIONS (2014)

添加到收藏夹

Article Engineering, Biomedical

Complex heterogeneous tissue constructs containing multiple cell types prepared by inkjet printing technology

Tao Xu et al.

BIOMATERIALS (2013)

添加到收藏夹

Article Polymer Science

Chitosan-based biomaterials for tissue engineering

Florence Croisier et al.

EUROPEAN POLYMER JOURNAL (2013)

添加到收藏夹

Article Engineering, Biomedical

Evaluation of hydrogels for bio-printing applications

Sean V. Murphy et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2013)

添加到收藏夹

Article Engineering, Biomedical

3D Bioprinting of heterogeneous aortic valve conduits with alginate/gelatin hydrogels

Bin Duan et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2013)

添加到收藏夹

Article Chemistry, Multidisciplinary

Microarrays of Phospholipid Bilayers Generated by Inkjet Printing

Misato Yamada et al.

LANGMUIR (2013)

添加到收藏夹

Review Veterinary Sciences

Carrageenan: a review

J. Necas et al.

VETERINARNI MEDICINA (2013)

添加到收藏夹

Article Engineering, Biomedical

Laser-assisted printing of alginate long tubes and annular constructs

Jingyuan Yan et al.

BIOFABRICATION (2013)

添加到收藏夹

Article Engineering, Biomedical

Mechanical characterization of bioprinted in vitro soft tissue models

Ting Zhang et al.

BIOFABRICATION (2013)

添加到收藏夹

Article Engineering, Biomedical

Biofabrication of multi-material anatomically shaped tissue constructs

Jetze Visser et al.

BIOFABRICATION (2013)

添加到收藏夹

Review Chemistry, Physical

Alginate-Based Biomaterials for Regenerative Medicine Applications

Jinchen Sun et al.

MATERIALS (2013)

添加到收藏夹

Article Chemistry, Multidisciplinary

Gelapin, a degradable genipin cross-linked gelatin hydrogel

Damian M. Kirchmajer et al.

RSC ADVANCES (2013)

添加到收藏夹

Article Engineering, Biomedical

Three-Dimensional Human Tissue Chips Fabricated by Rapid and Automatic Inkjet Cell Printing

Michiya Matsusaki et al.

ADVANCED HEALTHCARE MATERIALS (2013)

添加到收藏夹

Article Engineering, Biomedical

Photocrosslinkable Kappa-Carrageenan Hydrogels for Tissue Engineering Applications

Silvia M. Mihaila et al.

ADVANCED HEALTHCARE MATERIALS (2013)

添加到收藏夹

Article Materials Science, Biomaterials

Bio-ink properties and printability for extrusion printing living cells

Johnson H. Y. Chung et al.

BIOMATERIALS SCIENCE (2013)

添加到收藏夹

Article Engineering, Biomedical

A new injectable radiopaque chitosan-based sclerosing embolizing hydrogel for endovascular therapies

Ahmed Fatimi et al.

ACTA BIOMATERIALIA (2012)

添加到收藏夹

Article Chemistry, Multidisciplinary

Rapid Fabrication of Complex 3D Extracellular Microenvironments by Dynamic Optical Projection Stereolithography

A. Ping Zhang et al.

ADVANCED MATERIALS (2012)

添加到收藏夹

Article Biochemistry & Molecular Biology

Enzymatic cross-linking of gelatine with laccase and tyrosinase

Suzana Jus et al.

BIOCATALYSIS AND BIOTRANSFORMATION (2012)

添加到收藏夹

Article Engineering, Biomedical

Cardiac tissue engineering using tissue printing technology and human cardiac progenitor cells

Roberto Gaetani et al.

BIOMATERIALS (2012)

添加到收藏夹

Article Biotechnology & Applied Microbiology

Skin tissue generation by laser cell printing

Lothar Koch et al.

BIOTECHNOLOGY AND BIOENGINEERING (2012)

添加到收藏夹

Article Chemistry, Applied

Synergistic effects between κ-carrageenan and locust bean gum on physicochemical properties of edible films made thereof

Joana T. Martins et al.

FOOD HYDROCOLLOIDS (2012)

添加到收藏夹

Review Polymer Science

Alginate: Properties and biomedical applications

Kuen Yong Lee et al.

PROGRESS IN POLYMER SCIENCE (2012)

添加到收藏夹

Article Cell & Tissue Engineering

Biofabrication of Osteochondral Tissue Equivalents by Printing Topologically Defined, Cell-Laden Hydrogel Scaffolds

Natalja E. Fedorovich et al.

TISSUE ENGINEERING PART C-METHODS (2012)

添加到收藏夹

Review Chemistry, Applied

Advances in Bioactive Hydrogels to Probe and Direct Cell Fate

Cole A. DeForest et al.

ANNUAL REVIEW OF CHEMICAL AND BIOMOLECULAR ENGINEERING, VOL 3 (2012)

添加到收藏夹

Article Pharmacology & Pharmacy

Alginate based Hydrogel as a Potential Biopolymeric Carrier for Drug Delivery and Cell Delivery Systems: Present Status and Applications

Tapan Kumar Giri et al.

Current Drug Delivery (2012)

添加到收藏夹

Article Multidisciplinary Sciences

Preparation of 3D Fibrin Scaffolds for Stem Cell Culture Applications

Kathleen Kolehmainen et al.

JOVE-JOURNAL OF VISUALIZED EXPERIMENTS (2012)

添加到收藏夹

Article Engineering, Biomedical

The development of collagen-GAG scaffold-membrane composites for tendon tissue engineering

Steven R. Caliari et al.

BIOMATERIALS (2011)

添加到收藏夹

Review Chemistry, Applied

Biological activities and potential health benefits of sulfated polysaccharides derived from marine algae

Isuru Wijesekara et al.

CARBOHYDRATE POLYMERS (2011)

添加到收藏夹

Article Engineering, Biomedical

Survival of porcine mesenchymal stem cells over the alginate recovered cellular method

Jonah Cohen et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2011)

添加到收藏夹

Review Engineering, Biomedical

Direct-write bioprinting three-dimensional biohybrid systems for future regenerative therapies

Carlos C. Chang et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2011)

添加到收藏夹

Article Cell & Tissue Engineering

Gelatin-Based Laser Direct-Write Technique for the Precise Spatial Patterning of Cells

Nathan R. Schiele et al.

TISSUE ENGINEERING PART C-METHODS (2011)

添加到收藏夹

Article Engineering, Biomedical

Adipogenic differentiation of laser-printed 3D tissue grafts consisting of human adipose-derived stem cells

M. Gruene et al.

BIOFABRICATION (2011)

添加到收藏夹

Article Engineering, Biomedical

Three-dimensional inkjet biofabrication based on designed images

Kenichi Arai et al.

BIOFABRICATION (2011)

添加到收藏夹

Article Engineering, Biomedical

Bioprinting vessel-like constructs using hyaluronan hydrogels crosslinked with tetrahedral polyethylene glycol tetracrylates

Aleksander Skardal et al.

BIOMATERIALS (2010)

添加到收藏夹

Article Engineering, Biomedical

An cell-assembly derived physiological 3D model of the metabolic syndrome, based on adipose-derived stromal cells and a gelatin/alginate/fibrinogen matrix

Mingen Xu et al.

BIOMATERIALS (2010)

添加到收藏夹

Review Engineering, Biomedical

A review on stereolithography and its applications in biomedical engineering

Ferry P. W. Melchels et al.

BIOMATERIALS (2010)

添加到收藏夹

Article Neurosciences

Bio-printing of collagen and VEGF-releasing fibrin gel scaffolds for neural stem cell culture

Yeong-Bae Lee et al.

EXPERIMENTAL NEUROLOGY (2010)

添加到收藏夹

Article Engineering, Biomedical

Collagen type I hydrogel allows migration, proliferation, and osteogenic differentiation of rat bone marrow stromal cells

Eric Hesse et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2010)

添加到收藏夹

Article Cell Biology

The extracellular matrix at a glance

Christian Frantz et al.

JOURNAL OF CELL SCIENCE (2010)

添加到收藏夹

Article Engineering, Electrical & Electronic

A three-dimensional hierarchical collagen scaffold fabricated by a combined solid freeform fabrication (SFF) and electrospinning process to enhance mesenchymal stem cell (MSC) proliferation

SeungHyun Ahn et al.

JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2010)

添加到收藏夹

Article Cell & Tissue Engineering

Photocrosslinkable Hyaluronan-Gelatin Hydrogels for Two-Step Bioprinting

Aleksander Skardal et al.

TISSUE ENGINEERING PART A (2010)

添加到收藏夹

Article Cell & Tissue Engineering

Laser Printing of Skin Cells and Human Stem Cells

Lothar Koch et al.

TISSUE ENGINEERING PART C-METHODS (2010)

添加到收藏夹

Article Engineering, Biomedical

In vivo bioprinting for computer- and robotic-assisted medical intervention: preliminary study in mice

Virginie Keriquel et al.

BIOFABRICATION (2010)

添加到收藏夹

Article Engineering, Biomedical

Biomatrices and biomaterials for future developments of bioprinting and biofabrication

M. Nakamura et al.

BIOFABRICATION (2010)

添加到收藏夹

Review Engineering, Biomedical

Laser-based direct-write techniques for cell printing

Nathan R. Schiele et al.

BIOFABRICATION (2010)

添加到收藏夹

Article Engineering, Biomedical

Gelation studies of a cellulose-based biohydrogel: The influence of pH, temperature and sterilization

Ahmed Fatimi et al.

ACTA BIOMATERIALIA (2009)

添加到收藏夹

Article Engineering, Biomedical

Silk fibroin/polyacrylamide Semi-interpenetrating network hydrogels for controlled drug release

Biman B. Mandal et al.

BIOMATERIALS (2009)

添加到收藏夹

Article Engineering, Biomedical

Human microvasculature fabrication using thermal inkjet printing technology

Xiaofeng Cui et al.

BIOMATERIALS (2009)

添加到收藏夹

Article Engineering, Biomedical

Organ printing: Tissue spheroids as building blocks

Vladimir Mironov et al.

BIOMATERIALS (2009)

添加到收藏夹

Article Biotechnology & Applied Microbiology

An Injectable Cellulose-Based Hydrogel for the Transfer of Autologous Nasal Chondrocytes in Articular Cartilage Defects

C. Vinatier et al.

BIOTECHNOLOGY AND BIOENGINEERING (2009)

添加到收藏夹

Article Biochemical Research Methods

Characterization of cell viability during bioprinting processes

Kalyani Nair et al.

Biotechnology Journal (2009)

添加到收藏夹

Article Chemistry, Applied

Mechanical properties of mammalian and fish gelatins based on their weight average molecular weight and molecular weight distribution

Jonhard Eysturskaro et al.

FOOD HYDROCOLLOIDS (2009)

添加到收藏夹

Article Biotechnology & Applied Microbiology

Bone morphogenic protein-2 (BMP-2) loaded nanoparticles mixed with human mesenchymal stem cell in fibrin hydrogel for bone tissue engineering

Keun-Hong Park et al.

JOURNAL OF BIOSCIENCE AND BIOENGINEERING (2009)

添加到收藏夹

Article Chemistry, Physical

Effect of Sodium Sulfate on the Gelling Behavior of Agarose and Water Structure Inside the Gel Networks

Tejwant Singh et al.

JOURNAL OF PHYSICAL CHEMISTRY B (2009)

添加到收藏夹

Review Multidisciplinary Sciences

The Extracellular Matrix: Not Just Pretty Fibrils

Richard O. Hynes

SCIENCE (2009)

添加到收藏夹

Article Cell & Tissue Engineering

Photocrosslinking of Gelatin Macromers to Synthesize Porous Hydrogels That Promote Valvular Interstitial Cell Function

Julie A. Benton et al.

TISSUE ENGINEERING PART A (2009)

添加到收藏夹

Article Engineering, Biomedical

Computer-aided design of microvasculature systems for use in vascular scaffold production

William Lafayette Mondy et al.

BIOFABRICATION (2009)

添加到收藏夹

Article Engineering, Biomedical

Influence of the degree of methacrylation on hyaluronic acid hydrogels properties

Sidi A. Bencherif et al.

BIOMATERIALS (2008)

添加到收藏夹

Article Engineering, Biomedical

Recombinant human collagen for tissue engineered corneal substitutes

Wenguang Liu et al.

BIOMATERIALS (2008)

添加到收藏夹

Article Engineering, Biomedical

The rheological properties of silated hydroxypropylmethylcellulose tissue engineering matrices

Ahmed Fatimi et al.

BIOMATERIALS (2008)

添加到收藏夹

Review Biochemistry & Molecular Biology

Chemically-modified HA for therapy and regenerative medicine

Glenn D. Prestwich et al.

CURRENT PHARMACEUTICAL BIOTECHNOLOGY (2008)

添加到收藏夹

Review Polymer Science

Pharmaceutical significance of cellulose: A review

S. Kamel et al.

EXPRESS POLYMER LETTERS (2008)

添加到收藏夹

Article Engineering, Manufacturing

Modeling of the flow rate in the dispensing-based process for fabricating tissue scaffolds

X. B. Chen et al.

JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2008)

添加到收藏夹

Article Engineering, Biomedical

An amidated carboxymethylcellulose hydrogel for cartilage regeneration

Gemma Leone et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2008)

添加到收藏夹

Article Cell & Tissue Engineering

Effects of dispensing pressure and nozzle diameter on cell survival from solid freeform fabrication-based direct cell writing

Robert Chang et al.

TISSUE ENGINEERING PART A (2008)

添加到收藏夹

Review Cell & Tissue Engineering

Cell encapsulation in biodegradable hydrogels for tissue engineering applications

Garret D. Nicodemus et al.

TISSUE ENGINEERING PART B-REVIEWS (2008)

添加到收藏夹

Review Cell & Tissue Engineering

Fibrin: A versatile scaffold for tissue engineering applications

Tamer A. E. Ahmed et al.

TISSUE ENGINEERING PART B-REVIEWS (2008)

添加到收藏夹

Article Engineering, Biomedical

Amidic alginate hydrogel for nucleus pulposus replacement

Gemma Leone et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2008)

添加到收藏夹

Article Engineering, Biomedical

Genipin-crosslinked chitosan/gelatin blends for biomedical applications

Valeria Chiono et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2008)

添加到收藏夹

Review Polymer Science

Silk as a biomaterial

Charu Vepari et al.

PROGRESS IN POLYMER SCIENCE (2007)

添加到收藏夹

Article Biotechnology & Applied Microbiology

Rapid prototyping three-dimensional cell/gelatin/fibrinogen constructs for medical regeneration

Wei Xu et al.

JOURNAL OF BIOACTIVE AND COMPATIBLE POLYMERS (2007)

添加到收藏夹

Article Pharmacology & Pharmacy

Modulation of drug release kinetics from hydroxypropyl methyl cellulose matrix tablets using polyvinyl pyrrolidone

Ian J. Hardy et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2007)

添加到收藏夹

Article Materials Science, Paper & Wood

Cellulose esters in drug delivery

Kevin J. Edgar

CELLULOSE (2007)

添加到收藏夹

Article Orthopedics

Chitosan-glycerol phosphate/blood implants elicit hyaline cartilage repair integrated with porous subchondral bone in microdrilled rabbit defects

C. D. Hoemann et al.

OSTEOARTHRITIS AND CARTILAGE (2007)

添加到收藏夹

Review Chemistry, Multidisciplinary

Hydrogels in biology and medicine: From molecular principles to bionanotechnology

Nicholas A. Peppas et al.

ADVANCED MATERIALS (2006)

添加到收藏夹

Article Ophthalmology

A simple, cross-linked collagen tissue substitute for corneal implantation

Yuwen Liu et al.

INVESTIGATIVE OPHTHALMOLOGY & VISUAL SCIENCE (2006)

添加到收藏夹

Article Engineering, Biomedical

A digital micro-mirror device-based system for the microfabrication of complex, spatially patterned tissue engineering scaffolds

Y Lu et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2006)

添加到收藏夹

Article Pharmacology & Pharmacy

Stability improvement of alpha-amylase entrapped in kappa-carrageenan beads: Physicochemical characterization and optimization using composite index

MG Sankalia et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2006)

添加到收藏夹

Article Automation & Control Systems

Optimization of stereolithography process parameters for part strength using design of experiments

K. Chockalingam et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2006)

添加到收藏夹

Article Engineering, Biomedical

Stereolithography of three-dimensional bioactive poly(ethylene glycol) constructs with encapsulated cells

Karina Arcaute et al.

ANNALS OF BIOMEDICAL ENGINEERING (2006)

添加到收藏夹

Article Biochemistry & Molecular Biology

Reversible hydrogels from self-assembling genetically engineered protein block copolymers

CY Xu et al.

BIOMACROMOLECULES (2005)

添加到收藏夹

Article Emergency Medicine

Glycosaminoglycan hydrogels as supplemental wound dressings for donor sites

KR Kirker et al.

JOURNAL OF BURN CARE & REHABILITATION (2004)

添加到收藏夹

Article Cell & Tissue Engineering

Rapid prototyping of tissue-engineering constructs, using photopolymerizable hydrogels and stereolithography

B Dhariwala et al.

TISSUE ENGINEERING (2004)

添加到收藏夹

Article Engineering, Biomedical

Silk-based biomaterials

GH Altman et al.

BIOMATERIALS (2003)

添加到收藏夹

Review Biotechnology & Applied Microbiology

Emerging biological materials through molecular self-assembly

SG Zhang

BIOTECHNOLOGY ADVANCES (2002)

添加到收藏夹

Article Engineering, Biomedical

Rapid prototyping of scaffolds derived from thermoreversible hydrogels and tailored for applications in tissue engineering

R Landers et al.

BIOMATERIALS (2002)

添加到收藏夹

Article Engineering, Biomedical

Photopolymerizable hydrogels for tissue engineering applications

KT Nguyen et al.

BIOMATERIALS (2002)

添加到收藏夹

Article Chemistry, Applied

A drop-on-demand ink-jet printer for combinatorial libraries and functionally graded ceramics

MM Mohebi et al.

JOURNAL OF COMBINATORIAL CHEMISTRY (2002)

添加到收藏夹

Article Ophthalmology

A photopolymerized sealant for corneal lacerations

D Miki et al.

CORNEA (2002)

添加到收藏夹

Article Chemistry, Multidisciplinary

In situ forming degradable networks and their application in tissue engineering and drug delivery

KS Anseth et al.

JOURNAL OF CONTROLLED RELEASE (2002)

添加到收藏夹

Review Pharmacology & Pharmacy

Novel crosslinking methods to design hydrogels

WE Hennink et al.

ADVANCED DRUG DELIVERY REVIEWS (2002)

添加到收藏夹

Article Polymer Science

Gelation mechanism of κ- and ι-carrageenan investigated by correlation between the strain-optical coefficient and the dynamic shear modulus

M Takemasa et al.

MACROMOLECULES (2001)

添加到收藏夹

Article Chemistry, Applied

Rheological characterisation of thermogelling chitosan/glycerol-phosphate solutions

A Chenite et al.

CARBOHYDRATE POLYMERS (2001)

添加到收藏夹

Article Engineering, Biomedical

Novel injectable neutral solutions of chitosan form biodegradable gels in situ

A Chenite et al.

BIOMATERIALS (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.