4.6 Article

A linear 2D-conjugated polymer based on 4,8-bis(4-chloro-5-tripropylsilyl-thiophen-2-yl)benzo [1,2-b:4,5-b′]dithiophene (BDT-T-SiCl) for low voltage loss organic photovoltaics

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Review Chemistry, Multidisciplinary

Recent progress in organic solar cells (Part I material science)

Yahui Liu et al.

Summary: In recent years, organic solar cells (OSCs) have made significant progress with power conversion efficiencies (PCEs) over 18%, showing promising practical applications. Key research focuses in the OSC field include development in material science and interface materials. The article systematically summarizes the recent progress in these areas and discusses current challenges and future developments.

SCIENCE CHINA-CHEMISTRY (2022)

Article Multidisciplinary Sciences

Single-layered organic photovoltaics with double cascading charge transport pathways: 18% efficiencies

Ming Zhang et al.

Summary: By using quaternary blends, double cascading energy level alignment is achieved in bulk heterojunction organic photovoltaic active layers, optimizing light absorption, carrier transport, and charge-transfer state energy levels for higher power conversion efficiencies. The chemical structures of donors and acceptors allow control over electronic structure and charge-transfer state energy levels, enabling manipulation of hole-transfer rates, carrier transport, and non-radiative recombination losses.

NATURE COMMUNICATIONS (2021)

Article Chemistry, Physical

Indoor Organic Photovoltaics: Optimal Cell Design Principles with Synergistic Parasitic Resistance and Optical Modulation Effect

Muhammad Ahsan Saeed et al.

Summary: The article summarizes the research progress of indoor organic photovoltaics (OPVs), emphasizing the significant role of parasitic resistance in improving indoor efficiency and highlighting the impact of optical modulation on light absorption in indoor OPVs. It introduces the latest advances in material design and key strategies, such as interfacial engineering and photoactive layer thickness, to improve OPV performance.

ADVANCED ENERGY MATERIALS (2021)

Article Multidisciplinary Sciences

The role of charge recombination to triplet excitons in organic solar cells

Alexander J. Gillett et al.

Summary: The majority of charge recombination in organic solar cells that use NFAs occurs through non-emissive NFA triplet excitons under open-circuit conditions, reducing the open-circuit voltage. Engineering substantial hybridization between NFA triplet excitons and spin-triplet charge-transfer excitons can suppress this non-radiative recombination pathway, potentially leading to organic solar cells with power conversion efficiencies of 20% or more.

NATURE (2021)

Article Nanoscience & Nanotechnology

Side-chain engineering of copolymers based on benzotriazole (BTA) and dithieno[2,3-d;2′,3′-d′]benzo[1,2-b;4,5-b′]dithiophenes (DTBDT) enables a high PCE of 14.6%

Jialing Zhou et al.

Summary: The length of the alkyl side chain on Dithieno[2,3-d;2 ',3 '-d ']benzo[1,2-b;4,5-b ']dithiophenes (DTBDT) and benzo[d][1,2,3]triazole (BTA) conjugated polymers has a significant impact on the photovoltaic performance, affecting energy level distribution, molecular stacking, miscibility, and morphology. The appropriate alkyl chain length can lead to enhanced charge transport characteristics and optimized surface morphology, ultimately increasing power conversion efficiency.

NANOTECHNOLOGY (2021)

Article Nanoscience & Nanotechnology

Fabrication of High VOC Organic Solar Cells with a Non-Halogenated Solvent and the Effect of Substituted Groups for Same-A-Strategy Material Combinations

Tingting Dai et al.

Summary: In this study, a class of high-voltage organic solar cells processed with the environmentally friendly solvent THF were reported. The use of various BTA-based polymers and small molecules as p-type and n-type materials led to high open-circuit voltage and efficiency. The results demonstrate that unsubstituted BTA units in polymers can achieve high voltage and promising performance via non-halogenated solvent processing.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Multidisciplinary

A New Conjugated Polymer that Enables the Integration of Photovoltaic and Light-Emitting Functions in One Device

Ye Xu et al.

Summary: This study demonstrates the design and application of a new wide-bandgap polymer, PBQx-TCl, in photovoltaic and light-emitting devices. Devices fabricated with nonfullerene acceptors show high power conversion efficiency under various lighting conditions, showcasing the potential of PBQx-TCl-based devices in both photovoltaic and light-emitting functions.

ADVANCED MATERIALS (2021)

Article Chemistry, Applied

Gradually modulating the three parts of D-π-A type polymers for high-performance organic solar cells

Jialing Zhou et al.

JOURNAL OF ENERGY CHEMISTRY (2021)

Article Chemistry, Multidisciplinary

Correlating Charge-Transfer State Lifetimes with Material Energetics in Polymer:Non-Fullerene Acceptor Organic Solar Cells

Yifan Dong et al.

Summary: Reducing the energy offset between the lowest exciton and charge-transfer states can suppress energy loss in polymer:NFA organic solar cells. The study found that as the energy loss decreases, the CT state lifetime decreases as well, indicating increased mixing and hybridization between CT states and shorter-lived singlet excitons. Achieving longer exciton and CT state lifetimes has the potential to enhance OSC efficiencies.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

Review Chemistry, Physical

Recent progress of organic photovoltaics for indoor energy harvesting

Lin Xie et al.

Summary: The recent progress of indoor organic photovoltaics shows high power conversion efficiency and suitability for indoor energy harvesting. Due to the drawbacks of outdoor solar cells, indoor organic photovoltaic technology emerges as a reliable option for wireless power supply.

NANO ENERGY (2021)

Article Nanoscience & Nanotechnology

Tricyclic or Pentacyclic D Units: Design of D-π-A-Type Copolymers for High VOC Organic Photovoltaic Cells

Tingting Dai et al.

Summary: In this study, tricyclic and pentacyclic D units were utilized to develop D-pi-A-type copolymers for high-voltage OPV cells, achieving high V-OC values over 1.10 V. While the tricyclic D unit BDF showed higher performance in terms of J(SC) and fill factor, the pentacyclic D unit DTBDT exhibited the worst performance due to higher bimolecular recombination and disordered molecular stacking.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Multidisciplinary

A Well-Mixed Phase Formed by Two Compatible Non-Fullerene Acceptors Enables Ternary Organic Solar Cells with Efficiency over 18.6%

Yunhao Cai et al.

Summary: The ternary strategy of incorporating a third component into a binary blend has led to highly efficient organic solar cells with unprecedented power conversion efficiency values.

ADVANCED MATERIALS (2021)

Article Chemistry, Physical

Reduced non-radiative charge recombination enables organic photovoltaic cell approaching 19% efficiency

Pengqing Bi et al.

Summary: Introducing HDO-4Cl increased the exciton diffusion length in the acceptor phase, reducing non-radiative charge recombination and improving photon utilization efficiency in PBDB-TF: eC9-based OPV cells. This led to achieving a high-efficiency OPV cell with outstanding power conversion efficiency, demonstrating the effectiveness of regulating exciton behaviors in reducing energy loss.
Article Materials Science, Multidisciplinary

Efficient and moisture-resistant organic solar cells via simultaneously reducing the surface defects and hydrophilicity of an electron transport layer

Xueman Gao et al.

Summary: A simple organic trisiloxane molecule (TSi) was developed and applied to modify sol-gel ZnO films, improving the performance and humidity resistance of organic solar cells. The TSi/sg-ZnO bilayer ETL showed promise in enhancing the photovoltaic performance and moisture-resistance of OSCs, delivering higher efficiency and stability in different photovoltaic systems.

JOURNAL OF MATERIALS CHEMISTRY C (2021)

Review Chemistry, Multidisciplinary

Research Advances on Benzotriazole-based Organic Photovoltaic Materials

Yang Bai et al.

Summary: This article focuses on the research progress and molecular design strategies of BTA-based photovoltaic materials in recent years, highlighting the efficiency improvement by the D-A conjugated strategy in organic solar cells.

ACTA CHIMICA SINICA (2021)

Article Nanoscience & Nanotechnology

Asymmetric Siloxane Functional Side Chains Enable High-Performance Donor Copolymers for Photovoltaic Applications

Ziye Tang et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Chemistry, Multidisciplinary

Single-Junction Organic Photovoltaic Cells with Approaching 18% Efficiency

Yong Cui et al.

ADVANCED MATERIALS (2020)

Article Multidisciplinary Sciences

18% Efficiency organic solar cells

Qishi Liu et al.

SCIENCE BULLETIN (2020)

Review Chemistry, Multidisciplinary

n-Type Molecular Photovoltaic Materials: Design Strategies and Device Applications

Qihui Yue et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

Review Chemistry, Physical

Recent Progress on Indoor Organic Photovoltaics: From Molecular Design to Production Scale

Mathieu Mainville et al.

ACS ENERGY LETTERS (2020)

Article Nanoscience & Nanotechnology

Organic Photovoltaic Cells for Indoor Applications: Opportunities and Challenges

Yong Cui et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Review Chemistry, Multidisciplinary

A-DA'D-A non-fullerene acceptors for high-performance organic solar cells

Qingya Wei et al.

SCIENCE CHINA-CHEMISTRY (2020)

Review Chemistry, Multidisciplinary

Recent progress in indoor organic photovoltaics

Hwa Sook Ryu et al.

NANOSCALE (2020)

Article Chemistry, Multidisciplinary

Hybridization of Local Exciton and Charge-Transfer States Reduces Nonradiative Voltage Losses in Organic Solar Cells

Flurin D. Eisner et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2019)

Review Chemistry, Physical

Asymmetric Nonfullerene Small Molecule Acceptors for Organic Solar Cells

Chao Li et al.

ADVANCED ENERGY MATERIALS (2019)

Article Chemistry, Multidisciplinary

1 cm2 Organic Photovoltaic Cells for Indoor Application with over 20% Efficiency

Yong Cui et al.

ADVANCED MATERIALS (2019)

Article Chemistry, Multidisciplinary

Ternary Organic Solar Cells with Efficiency >16.5% Based on Two Compatible Nonfullerene Acceptors

Jiali Song et al.

ADVANCED MATERIALS (2019)

Article Multidisciplinary Sciences

Origin of Photocurrent and Voltage Losses in Organic Solar Cells

Guangchao Han et al.

ADVANCED THEORY AND SIMULATIONS (2019)

Review Chemistry, Physical

Flexible and Semitransparent Organic Solar Cells

Yaowen Li et al.

ADVANCED ENERGY MATERIALS (2018)

Review Nanoscience & Nanotechnology

Non-fullerene acceptors for organic solar cells

Cenqi Yan et al.

NATURE REVIEWS MATERIALS (2018)

Article Chemistry, Multidisciplinary

Nonfullerene Tandem Organic Solar Cells with High Open-Circuit Voltage of 1.97 V

Wenqing Liu et al.

ADVANCED MATERIALS (2016)

Review Chemistry, Multidisciplinary

Non-Fullerene Electron Acceptors for Use in Organic Solar Cells

Christian B. Nielsen et al.

ACCOUNTS OF CHEMICAL RESEARCH (2015)

Article Chemistry, Multidisciplinary

A Large-Bandgap Conjugated Polymer for Versatile Photovoltaic Applications with High Performance

Maojie Zhang et al.

ADVANCED MATERIALS (2015)

Article Physics, Applied

Quantifying Losses in Open-Circuit Voltage in Solution-Processable Solar Cells

Jizhong Yao et al.

PHYSICAL REVIEW APPLIED (2015)

Review Chemistry, Multidisciplinary

Quantitative Determination of Organic Semiconductor Microstructure from the Molecular to Device Scale

Jonathan Rivnay et al.

CHEMICAL REVIEWS (2012)

Article Physics, Applied

Recombination and loss analysis in polythiophene based bulk heterojunction photodetectors

P Schilinsky et al.

APPLIED PHYSICS LETTERS (2002)