4.6 Article

Design and development of nucleobase modified sulfonated poly(ether ether ketone) membranes for high-performance direct methanol fuel cells

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Physical

Evaluating the Case for Reduced Precious Metal Catalysts in Proton Exchange Membrane Electrolyzers

McKenzie A. Hubert et al.

Summary: This article discusses the key technology of proton exchange membrane (PEM) water electrolyzers in decarbonizing hydrogen production. The importance of diversifying catalyst materials to reduce system costs and mitigate supply chain risk is emphasized, and the trade-offs between catalyst capital cost and activity are analyzed.

ACS ENERGY LETTERS (2022)

Article Energy & Fuels

Fuel cells with an operational range of-20 °C to 200 °C enabled by phosphoric acid-doped intrinsically ultramicroporous membranes

Hongying Tang et al.

Summary: Researchers have developed a new type of fuel cell membrane that can operate over a wider temperature range, from -20 to 200 degrees C. This ultramicroporous membrane retains phosphoric acid even under highly humidified conditions and exhibits higher proton conductivity retention compared to conventional membranes. This innovation could simplify heat and water management in fuel cell systems, potentially reducing costs.

NATURE ENERGY (2022)

Article Engineering, Environmental

L-tyrosine grafted palladium graphite oxide and sulfonated poly(ether ether ketone) based novel composite membrane for direct methanol fuel cell

Pradip Das et al.

Summary: This study involves the synthesis of amino acid grafted nanocomposites as proton exchange membranes for direct methanol fuel cells and assessing their selectivity. The results show significant improvement in blocking methanol and enhanced conductivity of the composite membrane after modification.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Physical

High methanol resistant polyelectrolyte membrane based on semi-crystalline Poly(ether ketone) with densely sulfonated side chain for direct methanol fuel cell

Di Liu et al.

Summary: Semi-crystalline PEK-SPx membranes, consisting of a crystalline poly(ether ketone) main chain and densely sulfonated side chain, exhibit excellent dimensional stability and methanol resistance. PEK-SP20 membrane shows stable performance in pure methanol, making it suitable for direct methanol fuel cells.

JOURNAL OF POWER SOURCES (2021)

Article Engineering, Chemical

Spindle-like MOFs-derived porous carbon filled sulfonated poly (ether ether ketone): A high performance proton exchange membrane for direct methanol fuel cells

Honghao Huang et al.

Summary: The sulfonated spindle-like carbon derived from metal-organic framework has been used as a filler for the SPEEK membrane, resulting in improved properties as a proton exchange membrane for fuel cells. The MOF-C-SO3H@SPEEK membrane exhibits higher proton conductivity and lower methanol permeability compared to Nafion 115, leading to a maximum power density of 83.91 mW cm(-2) in direct methanol fuel cells.

JOURNAL OF MEMBRANE SCIENCE (2021)

Article Chemistry, Multidisciplinary

Novel Proton Exchange Membrane with Long-Range Acid-Base-Pair Proton Transfer Pathways Based on Functionalized Polyethyleneimine

Henghui Huang et al.

Summary: The novel composite PEM based on PFSA and PEIMPA improves water absorption/ retention, proton conductivity, and single-cell performance by constructing efficient mass transfer pathways using long-range acid-base pairs, reducing dependency on water content.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

Review Chemistry, Physical

The promise of hydrogen production from alkaline anion exchange membrane electrolyzers

Changqing Li et al.

Summary: Producing hydrogen using anion exchange membrane water electrolysis is a promising approach to address the energy crisis, but further understanding and improvement of the technology is needed, including increasing power efficiency and reducing costs.

NANO ENERGY (2021)

Article Energy & Fuels

Polysulfide-based redox flow batteries with long life and low levelized cost enabled by charge-reinforced ion-selective membranes

Zhejun Li et al.

Summary: The study introduces a membrane design to reduce capacity decay in polysulfide-based ARFBs over long cycles and durations, enhancing cost-effectiveness. By developing a charge-reinforced ion-selective membrane, the polysulfide flow battery demonstrates stable cycling with low capacity decay rate. Small-angle X-ray scattering and in-situ attenuated total reflectance-Fourier transform infrared/solid-state NMR indicate improved membrane properties compared to commercial Nafion membrane.

NATURE ENERGY (2021)

Article Chemistry, Physical

Macromolecule sulfonated Poly(ether ether ketone) crosslinked poly(4,4′-diphenylether-5,5′-bibenzimidazole) proton exchange membranes: Broaden the temperature application range and enhanced mechanical properties

Jierui Song et al.

Summary: By covalently crosslinking polymers, the performance of proton exchange membranes was optimized to achieve high proton conductivity at both high and low temperatures. Compared with conventional membranes, crosslinked membranes demonstrated better fuel cell performance across the entire temperature range.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Article Chemistry, Physical

Efficient and durable composite membranes based on polydopamine-mediated sulfonated graphene oxide for direct methanol fuel cells

Xin Liu et al.

Summary: A new type of sulfonated graphene oxide product, SDGO, is fabricated by sulfonation on polydopamine (PDA) deposited graphene oxide, resulting in improved uniformity/sufficient sulfonation compared to PDA-free SGO. The sulfonated poly(ether ether ketone) (SPEEK) composite membranes filled with SDGO exhibit better matrix-filler compatibility, larger hydrophilic domains, and improved proton conductivity, methanol barrier, and mechanical properties. SPEEK-SDGO based DMFCs outperform Nafion 212 based DMFCs in terms of power density and exhibit superior durability during DMFC operations.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Article Chemistry, Physical

Highly selective SPEEK/ENR blended polymer electrolyte membranes for direct methanol fuel cell

W. N. E. Wan Mohd Noral Azman et al.

MATERIALS TODAY ENERGY (2020)

Review Chemistry, Physical

Multidimensional nanostructured membrane electrode assemblies for proton exchange membrane fuel cell applications

Guoliang Wang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Review Chemistry, Multidisciplinary

Unlocking the door to highly active ORR catalysts for PEMFC applications: polyhedron-engineered Pt-based nanocrystals

Yan-Jie Wang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Article Chemistry, Physical

Sulfonated polyether ether ketone/strontium zirconite@TiO2 nanocomposite membranes for direct methanol fuel cells

G. Gnana Kumar et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Article Chemistry, Physical

Compatible ionic crosslinking composite membranes based on SPEEK and PBI for high temperature proton exchange membranes

Mingfeng Song et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2016)

Article Chemistry, Physical

Pendant dual sulfonated poly(arylene ether ketone) proton exchange membranes for fuel cell application

Minh Dat Thinh Nguyen et al.

JOURNAL OF POWER SOURCES (2016)

Article Engineering, Chemical

Nanocomposite SPEEK-based membranes for Direct Methanol Fuel Cells at intermediate temperatures

Sergio Molla et al.

JOURNAL OF MEMBRANE SCIENCE (2015)

Review Chemistry, Multidisciplinary

Recent Development of Polymer Electrolyte Membranes for Fuel Cells

Hongwei Zhang et al.

CHEMICAL REVIEWS (2012)

Article Chemistry, Multidisciplinary

Structure-Morphology-Property Relationships of Non-Perfluorinated Proton-Conducting Membranes

Timothy J. Peckham et al.

ADVANCED MATERIALS (2010)

Article Chemistry, Multidisciplinary

A new supramolecular sulfonated polyimide for use in proton exchange membranes for fuel cells

Yun-Sheng Ye et al.

CHEMICAL COMMUNICATIONS (2010)

Article Chemistry, Physical

Composite membranes based on a novel benzimidazole grafted PEEK and SPEEK for fuel cells

Hongtao Li et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2010)

Review Chemistry, Multidisciplinary

Alternative polymer systems for proton exchange membranes (PEMs)

MA Hickner et al.

CHEMICAL REVIEWS (2004)

Article Engineering, Chemical

Sulfonated poly(ether ether ketone) membranes for direct methanol fuel cell

L Li et al.

JOURNAL OF MEMBRANE SCIENCE (2003)