4.8 Article

Bulk Defect Suppression of Micrometer-Thick Perovskite Single Crystals Enables Stable Photovoltaics

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Multidisciplinary

Self-Powered FA0.55MA0.45PbI3 Single-Crystal Perovskite X-Ray Detectors with High Sensitivity

Jinming Wu et al.

Summary: This study achieved self-powered and highly sensitive single-crystal perovskite X-ray detectors by controlling crystal thickness and optimizing carrier transport properties. The incorporation of formamidinium cation into methylammonium lead triiodide increased the mobility-lifetime product of the crystals, leading to a record X-ray detection sensitivity. This work represents an effective way to achieve self-powered perovskite X-ray detectors with both high sensitivity and low detection limit.

ADVANCED FUNCTIONAL MATERIALS (2022)

Article Chemistry, Physical

Engineering the Hole Extraction Interface Enables Single-Crystal MAPbI3 Perovskite Solar Cells with Efficiency Exceeding 22% and Superior Indoor Response

Ning Li et al.

Summary: In this study, hydrophobic P3HT molecules were successfully incorporated into the hole transport layer of perovskite single crystals, resulting in reduced interface and bulk defect density, suppressed nonradiative recombination, accelerated charge transport, and extraction. This led to a significantly enhanced open-circuit voltage and efficiency, making it the highest values achieved for MAPbI(3) single-crystal solar cells. Additionally, the incorporation of P3HT resulted in superior weak light response and an indoor photovoltaic efficiency of 39.2% at 1000 lux irradiation.

ADVANCED ENERGY MATERIALS (2022)

Article Chemistry, Multidisciplinary

Triple-Cation and Mixed-Halide Perovskite Single Crystal for High-Performance X-ray Imaging

Yucheng Liu et al.

Summary: This study reports the successful controlled incorporation of methylammonium (MA(+)), cesium (Cs+), and bromine (Br-) ions into the FAPbI3 lattice to grow inch-sized stable perovskite single crystal (FAMACs SC), resulting in X-ray detectors with superior sensitivity and stability.

ADVANCED MATERIALS (2021)

Article Multidisciplinary Sciences

Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes

Hanul Min et al.

Summary: By introducing an interlayer between the electron-transporting and perovskite layers in perovskite solar cells, researchers have successfully enhanced charge extraction and transport from the perovskite, leading to higher power conversion efficiency and fewer interfacial defects. The coherent interlayer allowed the fabrication of devices with a certified efficiency of 25.5%, which maintained about 90% of its initial efficiency even after continuous light exposure for 500 hours. The findings provide guidelines for designing defect-minimizing interfaces in metal halide perovskites and electron-transporting layers.

NATURE (2021)

Article Multidisciplinary Sciences

Ligand assisted growth of perovskite single crystals with low defect density

Ye Liu et al.

Summary: The defect density in metal halide perovskite single crystals plays a critical role in achieving high-performance optoelectronic devices. In this study, the authors demonstrate a significant reduction in defect density in perovskite single crystals grown using a ligand-assisted solution process with DPSI as an additive, resulting in improved crystal quality and enhanced X-ray detection sensitivity.

NATURE COMMUNICATIONS (2021)

Review Chemistry, Multidisciplinary

Mitigating ion migration in perovskite solar cells

Enbing Bi et al.

Summary: Intrinsic ion migration in metal halide perovskite absorber layers and interfaces severely limits the device stability of perovskite solar cells. Efforts to mitigate this issue have been made, but it remains a formidable challenge in commercializing PSCs. While degradation of PSCs caused by extrinsic factors has been studied and relieved to some extent, intrinsic ion migration remains a major obstacle to commercialization.

TRENDS IN CHEMISTRY (2021)

Review Chemistry, Multidisciplinary

A review on the stability of inorganic metal halide perovskites: challenges and opportunities for stable solar cells

Wanchun Xiang et al.

Summary: Inorganic perovskite based solar cells have garnered global attention for their high thermal stability and theoretical power conversion efficiencies. However, their poorer phase stability compared to hybrid counterparts requires further research. This review summarizes the progress in stability research on inorganic perovskites, focusing on degradation mechanisms towards temperature, moisture, and oxygen.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Article Chemistry, Multidisciplinary

22.8%-Efficient single-crystal mixed-cation inverted perovskite solar cells with a near-optimal bandgap

Abdullah Y. Alsalloum et al.

Summary: By utilizing a mixed-cation single-crystal absorber layer, the external quantum efficiency band edge can be redshifted, leading to increased short-circuit current densities and overall efficiencies.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

Review Chemistry, Multidisciplinary

Single Crystal Perovskite Solar Cells: Development and Perspectives

Xiao Cheng et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Article Multidisciplinary Sciences

Efficient lateral-structure perovskite single crystal solar cells with high operational stability

Yilong Song et al.

NATURE COMMUNICATIONS (2020)

Article Chemistry, Physical

Designing Large-Area Single-Crystal Perovskite Solar Cells

Xiaomei Jiang et al.

ACS ENERGY LETTERS (2020)

Article Multidisciplinary Sciences

A fabrication process for flexible single-crystal perovskite devices

Yusheng Lei et al.

NATURE (2020)

Article Chemistry, Physical

Ultrathin Perovskite Monocrystals Boost the Solar Cell Performance

Wenchi Kong et al.

ADVANCED ENERGY MATERIALS (2020)

Article Chemistry, Multidisciplinary

Conjugated Polymer-Assisted Grain Boundary Passivation for Efficient Inverted Planar Perovskite Solar Cells

Wei Chen et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Article Optics

Surface passivation of perovskite film for efficient solar cells

Qi Jiang et al.

NATURE PHOTONICS (2019)

Article Chemistry, Physical

Single-Crystal MAPbI3 Perovskite Solar Cells Exceeding 21% Power Conversion Efficiency

Zhaolai Chen et al.

ACS ENERGY LETTERS (2019)

Review Chemistry, Multidisciplinary

Recent Advances in Flexible Perovskite Solar Cells: Fabrication and Applications

Dong Yang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Article Chemistry, Multidisciplinary

Stable High-Performance Perovskite Solar Cells via Grain Boundary Passivation

Tianqi Niu et al.

ADVANCED MATERIALS (2018)

Article Chemistry, Multidisciplinary

The Exploration of Carrier Behavior in the Inverted Mixed Perovskite Single-Crystal Solar Cells

Yuan Huang et al.

ADVANCED MATERIALS INTERFACES (2018)

Article Chemistry, Multidisciplinary

Scaling behavior of moisture-induced grain degradation in polycrystalline hybrid perovskite thin films

Qi Wang et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

Article Chemistry, Multidisciplinary

120 mm single-crystalline perovskite and wafers: towards viable applications

Yucheng Liu et al.

SCIENCE CHINA-CHEMISTRY (2017)

Article Multidisciplinary Sciences

Impact of grain boundaries on efficiency and stability of organic-inorganic trihalide perovskites

Zhaodong Chu et al.

NATURE COMMUNICATIONS (2017)

Article Multidisciplinary Sciences

Thin single crystal perovskite solar cells to harvest below-bandgap light absorption

Zhaolai Chen et al.

NATURE COMMUNICATIONS (2017)

Article Chemistry, Physical

The intrinsic properties of FA(1-x)MAxPbI3 perovskite single crystals

Yuan Huang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Editorial Material Multidisciplinary Sciences

Single crystalline CH3NH3PbI3 self-grown on FTO/TiO2 substrate for high efficiency perovskite solar cells

Jinjin Zhao et al.

SCIENCE BULLETIN (2017)

Article Chemistry, Multidisciplinary

A micron-scale laminar MAPbBr3 single crystal for an efficient and stable perovskite solar cell

Hua-Shang Rao et al.

CHEMICAL COMMUNICATIONS (2017)

Article Chemistry, Multidisciplinary

Room-Temperature Formation of Highly Crystalline Multication Perovskites for Efficient, Low-Cost Solar Cells

Taisuke Matsui et al.

ADVANCED MATERIALS (2017)

Article Chemistry, Multidisciplinary

Electronic and Ionic Transport Dynamics in Organolead Halide Perovskites

Dehui Li et al.

ACS NANO (2016)

Article Chemistry, Multidisciplinary

Solution-Grown Monocrystalline Hybrid Perovskite Films for Hole-Transporter-Free Solar Cells

Wei Peng et al.

ADVANCED MATERIALS (2016)

Article Chemistry, Multidisciplinary

Lateral-Structure Single-Crystal Hybrid Perovskite Solar Cells via Piezoelectric Poling

Qingfeng Dong et al.

ADVANCED MATERIALS (2016)

Article Chemistry, Multidisciplinary

Grain boundary dominated ion migration in polycrystalline organic-inorganic halide perovskite films

Yuchuan Shao et al.

ENERGY & ENVIRONMENTAL SCIENCE (2016)

Article Chemistry, Multidisciplinary

Perovskite CH3NH3PbI3(Cl) Single Crystals: Rapid Solution Growth, Unparalleled Crystalline Quality, and Low Trap Density toward 108 cm-3

Zhipeng Lian et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

Article Chemistry, Multidisciplinary

A Bismuth-Halide Double Perovskite with Long Carrier Recombination Lifetime for Photovoltaic Applications

Adam H. Slavney et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

Article Multidisciplinary Sciences

Trapped charge-driven degradation of perovskite solar cells

Namyoung Ahn et al.

NATURE COMMUNICATIONS (2016)

Article Multidisciplinary Sciences

Electron-hole diffusion lengths > 175 μm in solution-grown CH3NH3PbI3 single crystals

Qingfeng Dong et al.

SCIENCE (2015)

Article Chemistry, Physical

Stability of Metal Halide Perovskite Solar Cells

Tomas Leijtens et al.

ADVANCED ENERGY MATERIALS (2015)