4.6 Article

Intense broadband radioluminescence from an Mn2+-doped aluminoborate glass scintillator

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Multidisciplinary

All-Inorganic Perovskite Polymer-Ceramics for Flexible and Refreshable X-Ray Imaging

Weiqing Chen et al.

Summary: A novel perovskite polymer-ceramics scintillator with high transparency and quality is designed for flexible and refreshable X-ray imaging, achieved through a nucleation inhibition strategy. This scintillator-based detector boasts a high detection limit and spatial resolution, overcoming the long operation lifetime issue of perovskites-based scintillators.

ADVANCED FUNCTIONAL MATERIALS (2022)

Article Chemistry, Physical

The influence of Gd2O3 on shielding, thermal and luminescence properties of WO3-Gd2O3-B2O3 glass for radiation shielding and detection material

E. Kaewnuam et al.

Summary: This study investigated the physical, structural, optical, shielding, thermal, and luminescent properties of WO3-Gd2O3-B2O3 glasses, with a focus on the impact of replacing WO3 with Gd2O3. The density of the glasses increased with higher concentrations of Gd2O3, while the optical absorption spectra showed absorbance in the ultraviolet and visible light regions. Despite a small degradation in shielding properties with increasing Gd2O3 content, the glass displayed strong photoluminescence and radioluminescence, making it a promising material for gamma-ray shielding and X-ray radiation detection applications at different temperatures.

RADIATION PHYSICS AND CHEMISTRY (2022)

Article Materials Science, Multidisciplinary

Highly Efficient and Flexible Scintillation Screen Based on Manganese (II) Activated 2D Perovskite for Planar and Nonplanar High-Resolution X-Ray Imaging

Wenyi Shao et al.

Summary: This paper demonstrates a highly efficient and low-cost X-ray scintillator based on 2D butylammonium lead bromide perovskite and manganese (II) activator, which shows potential for commercial high-resolution X-ray imaging applications.

ADVANCED OPTICAL MATERIALS (2022)

Article Materials Science, Multidisciplinary

Ce3+-Doped Yttrium Aluminum Garnet Transparent Ceramics for High-Resolution X-Ray Imaging

Tao Ji et al.

Summary: This paper introduces a new type of TC scintillator material (YAG:Ce3+ TCs), which has high transmittance and steady-state light yield, and can achieve excellent X-ray imaging performance. Due to its structural stability, it can work stably under long-term X-ray irradiation, providing new opportunities for the development of high-quality X-ray imaging.

ADVANCED OPTICAL MATERIALS (2022)

Article Materials Science, Ceramics

Transparent heavily Eu3+-doped boroaluminate glass for X-ray detection

SunYueZi Chen et al.

Summary: The study investigated a novel efficient and transparent Eu3+-doped boroaluminate glass fabricated using the melt quenching technique, showing significantly enhanced optical responses to UV and X-ray. The optimal doping concentration of Eu3+ was found to be 8 mol%, with an internal quantum yield of 53.2% and high transparency. Additionally, the glass exhibited an X-ray excited luminescence integrated intensity of 18.4% of a commercial single crystal scintillator.

CERAMICS INTERNATIONAL (2022)

Article Materials Science, Multidisciplinary

Quantitative analysis of the physical properties of CsI, GAGG, LuAG, CWO, YAG, BGO, and GOS scintillators using 10-, 20-and 34-keV monochromated synchrotron radiation

Akio Yoneyama et al.

Summary: The light yield, spatial resolution, and image quality of various inorganic scintillators were investigated using monochromated synchrotron radiation. The results showed that CsI is suitable for micro X-ray radiography and computed tomography with a low X-ray flux source, while GAGG and LuAG are suitable with a high X-ray flux source.

OPTICAL MATERIALS EXPRESS (2021)

Article Chemistry, Multidisciplinary

Highly Efficient and Tunable Emission of Lead-Free Manganese Halides toward White Light-Emitting Diode and X-Ray Scintillation Applications

Tingming Jiang et al.

Summary: Environmentally friendly metal halides, such as tetramethylammonium manganese chloride and tetraethylammonium bromide, have been synthesized and shown to have high photoluminescence quantum yields and good environmental stability. When blended in white light-emitting diodes, they display outstanding luminous efficacy. Under X-ray excitation, these materials demonstrate steady-state X-ray light yields and radiation hardness.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Materials Science, Ceramics

Design, simulation, elaboration and luminescence of Tb3+-doped Ba0.84Gd0.16F2.16 fluoroaluminosilicate scintillating glass ceramics

SunYueZi Chen et al.

Summary: Extensive research has been conducted on scintillators to meet the demand for excellent radiation detection materials in various applications. The design of high density precursor glass doped with Tb3+ has shown potential for efficient X-ray absorption and green emission, with Tb3+-doped Ba0.84Gd0.16F2.16 glass ceramics demonstrating structural and optical properties for potential use in X-ray detection.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)

Article Optics

Sensitized red emission from Mn2+ ions in phosphate glass via silicon-induced defects

Jose A. Jimenez

Summary: This study reports the sensitization of red Mn2+ emission in phosphate glasses via luminescent defects induced by silicon. Co-doping with silicon resulted in improved UV transparencies, significant reduction of MnO2 facilitating Mn2+ stabilization, and the formation of luminescent defects with emission overlapping Mn2+ excitation. The decay kinetics of defects and Mn2+ ions were analyzed via time-resolved measurements, proposing a UV-to-visible down-conversion pathway originating from Si-related defects.

JOURNAL OF LUMINESCENCE (2021)

Article Nanoscience & Nanotechnology

Tailoring the electron and hole dimensionality to achieve efficient and stable metal halide perovskite scintillators

Zhifang Tan et al.

Summary: The lead-free perovskite Rb2Sn1-xTexCl6 demonstrated excellent water and radiation stability, with Te doping reducing the dimensionality of electrons and holes. This material had a high photoluminescence quantum yield and low X-ray detection limit, outperforming previous perovskite and traditional metal halide scintillators.

NANOPHOTONICS (2021)

Review Chemistry, Physical

Metal Halide Perovskites for X-ray Imaging Scintillators and Detectors

Yang Zhou et al.

Summary: Metal halide perovskite materials show promising potential in X-ray imaging and detection due to their high absorption cross sections and excellent optical and electrical properties. Future research should focus on addressing remaining technical challenges to enable broader applications of perovskite-based X-ray technologies.

ACS ENERGY LETTERS (2021)

Article Materials Science, Multidisciplinary

Embedding Cs3Cu2I5 Scintillators into Anodic Aluminum Oxide Matrix for High-Resolution X-Ray Imaging

Xue Zhao et al.

Summary: A new strategy of embedding metal halide scintillators into anodic aluminum oxide (AAO) has been developed, resulting in high-resolution pixelated scintillator films such as Cs3Cu2I5-AAO with excellent imaging performance. This approach offers a new pathway for high-resolution X-ray imaging.

ADVANCED OPTICAL MATERIALS (2021)

Article Materials Science, Multidisciplinary

Growth, luminescence, defects and scintillation properties of Sr co-doped LiI:Eu single crystal scintillator

Kalyani et al.

Summary: Different concentrations of Sr co-doping were grown on Eu doped LiI single crystal scintillators to improve their performance characteristics for thermal neutron detection. The major disadvantage of these scintillators is the lack of pulse shape discrimination of neutron and gamma radiations, which can be introduced with Sr co-doping. The effects of codoping on crystal structure, electronic properties, defects, luminescence, self-absorption, and scintillation properties have been studied in detail.

MATERIALS TODAY COMMUNICATIONS (2021)

Article Chemistry, Multidisciplinary

Reproducible X-ray Imaging with a Perovskite Nanocrystal Scintillator Embedded in a Transparent Amorphous Network Structure

Hao Zhang et al.

Summary: A self-limited growth strategy was proposed to construct CsPbBr3 nanocrystals embedded in a transparent amorphous network structure for X-imaging with excellent resolution and fast decay time. The performance degradation caused by high-dose X-ray irradiation can be fully recovered after a simple thermal treatment process, highlighting the practical settlement of promising perovskites for cost-effective scintillator devices.

ADVANCED MATERIALS (2021)

Article Chemistry, Inorganic & Nuclear

Effective atomic numbers of boron compounds obtained using Rayleigh to compton scattering intensity ratio

Esra Cinan et al.

Summary: In this study, effective atomic numbers of various boron compounds were measured using gamma rays and theoretically calculated with good agreement. A calibration curve was obtained for qualitative analysis of compounds within a certain range of effective atomic numbers.

APPLIED RADIATION AND ISOTOPES (2021)

Article Engineering, Environmental

A precisely space-separated strategy of donor-acceptor for intense red emitting composite borosilicate glass co-doped with CsPbCl3 quantum dots and Mn2+ ions

Lu-Yu Cao et al.

Summary: In this study, a strategy of precise space separation of donor-acceptor was proposed and successfully applied to develop a high luminescent performance composite borosilicate glass co-doped with CsPbCl3 quantum dots and Mn2+ ions. The high absorption efficiency of CsPbCl3 QDs and efficient energy transfer to Mn2+ ions led to an intense red broadband emission, demonstrating great potential for developing high luminescent performance ions-doped transparent glasses.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Multidisciplinary Sciences

Mn2+ induced significant improvement and robust stability of radioluminescence in Cs3Cu2I5 for high-performance nuclear battery

Xiaoming Li et al.

Summary: A Cs3Cu2I5:Mn scintillator with high light yield and thermal stability is introduced in this paper, which can improve the output efficiency of nuclear batteries. The mechanisms of radioluminescence enhancement are proposed.

NATURE COMMUNICATIONS (2021)

Article Nanoscience & Nanotechnology

Tailoring the electron and hole dimensionality to achieve efficient and stable metal halide perovskite scintillators

Zhifang Tan et al.

Summary: The lead-free perovskite Rb2Sn1-x Te x Cl6 shows excellent water and radiation stability, with Te doping improving the photoluminescence and decreasing electron and hole dimensionality. This new material outperforms previous perovskite and traditional metal halide scintillators in terms of maintaining photoluminescence and radioluminescence under harsh conditions.

NANOPHOTONICS (2021)

Article Materials Science, Ceramics

Highly efficient luminescence in bulk transparent Sr2GdF7:Tb3+ glass ceramic for potential X-ray detection

LiMing Teng et al.

CERAMICS INTERNATIONAL (2020)

Article Materials Science, Ceramics

Tb3+-doped transparent BaGdF5 glass-ceramics scintillator for X-ray detector

Zhigang Zheng et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2020)

Article Nanoscience & Nanotechnology

Multiphase Transition toward Colorless Bismuth-Germanate Scintillating Glass and Fiber for Radiation Detection

Zhenguo Shi et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Materials Science, Multidisciplinary

Large Lead-Free Perovskite Single Crystal for High-Performance Coplanar X-Ray Imaging Applications

Yucheng Liu et al.

ADVANCED OPTICAL MATERIALS (2020)

Article Optics

Low-dose real-time X-ray imaging with nontoxic double perovskite scintillators

Wenjuan Zhu et al.

LIGHT-SCIENCE & APPLICATIONS (2020)

Article Chemistry, Physical

High-Stable X-ray Imaging from All-Inorganic Perovskite Nanocrystals under a High Dose Radiation

Liuli Yang et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2020)

Article Multidisciplinary Sciences

Highly efficient eco-friendly X-ray scintillators based on an organic manganese halide

Liang-Jin Xu et al.

NATURE COMMUNICATIONS (2020)

Article Engineering, Biomedical

A digital phoswich detector using time-over-threshold for depth of interaction in PET

David L. Prout et al.

PHYSICS IN MEDICINE AND BIOLOGY (2020)

Article Chemistry, Multidisciplinary

Lead-Free Halide Rb2CuBr3 as Sensitive X-Ray Scintillator

Bo Yang et al.

ADVANCED MATERIALS (2019)

Article Materials Science, Multidisciplinary

Highly efficient Na5Gd9F32: Tb3+ glass ceramic as nanocomposite scintillator for X-ray imaging

WeiPing Chen et al.

OPTICAL MATERIALS EXPRESS (2018)

Article Materials Science, Multidisciplinary

Topological tailoring of structure and defects to enhance red to near-infrared afterglow from Mn2+-doped germanate photonic glasses

Haoyang Luo et al.

JOURNAL OF MATERIALS CHEMISTRY C (2018)

Article Multidisciplinary Sciences

Printable organometallic perovskite enables large-area, low-dose X-ray imaging

Yong Churl Kim et al.

NATURE (2017)

Article Materials Science, Multidisciplinary

Bane to boon: intrinsic defect sensitized photoluminescence from Mn2+ or rare-earth ion doped fluorosilicate photonic glasses

Qingliu Hu et al.

JOURNAL OF MATERIALS CHEMISTRY C (2017)

Article Energy & Fuels

Gamma-ray induced reversible photochromism of Mn2+ activated borophosphate glasses

Jing Ren et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2015)

Review Crystallography

Development of LuAG-based scintillator crystals - A review

M. Nikl et al.

PROGRESS IN CRYSTAL GROWTH AND CHARACTERIZATION OF MATERIALS (2013)

Article Chemistry, Physical

A tunable single-component warm white-light Sr3Y(PO4)(3):Eu2+,Mn2+ phosphor for white-light emitting diodes

Ning Guo et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2011)

Article Engineering, Electrical & Electronic

Nonproportional Response Between 0.1-100 keV Energy by Means of Highly Monochromatic Synchrotron X-Rays

Ivan V. Khodyuk et al.

IEEE TRANSACTIONS ON NUCLEAR SCIENCE (2010)

Review Engineering, Multidisciplinary

Scintillation detectors for x-rays

Martin Nikl

MEASUREMENT SCIENCE AND TECHNOLOGY (2006)