4.6 Article

End-group modification of non-fullerene acceptors enables efficient organic solar cells

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Multidisciplinary

High-Efficiency Organic Solar Cells with Reduced Nonradiative Voltage Loss Enabled by a Highly Emissive Narrow Bandgap Fused Ring Acceptor

Hao Lu et al.

Summary: In this study, two acceptors with different terminal groups but identical backbones were designed to enhance the PLQY of low bandgap acceptors. The results showed that improving the PLQY through terminal group engineering strategy effectively reduces nonradiative voltage loss in OSCs. A high power conversion efficiency of 17.1% was achieved in ternary OSCs based on the third component, SM16.

ADVANCED FUNCTIONAL MATERIALS (2022)

Article Chemistry, Multidisciplinary

Realizing 19.05% Efficiency Polymer Solar Cells by Progressively Improving Charge Extraction and Suppressing Charge Recombination

Kaien Chong et al.

Summary: This work demonstrates highly efficient polymer solar cells by improving charge extraction and suppressing charge recombination through side-chain engineering, adopting ternary blends, and introducing volatilizable solid additives. The optimized molecular structure and blend morphology lead to improved fill factor and power conversion efficiency.

ADVANCED MATERIALS (2022)

Article Chemistry, Multidisciplinary

Non-fullerene acceptors with hetero-dihalogenated terminals induce significant difference in single crystallography and enable binary organic solar cells with 17.5% efficiency

Lai Wang et al.

Summary: The synthesis of two new hetero-dihalogenated terminals with a fluorine/chlorine or fluorine/bromine pair, along with three NFAs incorporating these terminals, led to the achievement of high-performance OSCs. The presence of a fluorine/chlorine hetero-dihalogenated terminal resulted in the most planar molecular geometry, shortest intermolecular packing distance, and largest pi-pi electronic coupling among the acceptors, leading to improved crystallinity, phase separation, charge mobility, and recombination for enhanced power conversion efficiency of up to 17.52%.

ENERGY & ENVIRONMENTAL SCIENCE (2022)

Review Chemistry, Multidisciplinary

Recent progress in organic solar cells (Part I material science)

Yahui Liu et al.

Summary: In recent years, organic solar cells (OSCs) have made significant progress with power conversion efficiencies (PCEs) over 18%, showing promising practical applications. Key research focuses in the OSC field include development in material science and interface materials. The article systematically summarizes the recent progress in these areas and discusses current challenges and future developments.

SCIENCE CHINA-CHEMISTRY (2022)

Article Chemistry, Physical

Investigation of tunable halogen-free solvent engineering on aggregation and miscibility towards high-performance organic solar cells

Xin Song et al.

Summary: A new strategy called tunable nonhalogenated solvent engineering (TSE) was proposed in this study, which improved the performance and efficiency of organic solar cells prepared with non-halogenated solvents by mixing carbon disulfide and o-xylene.

NANO ENERGY (2022)

Article Chemistry, Multidisciplinary

Process-Aid Solid Engineering Triggers Delicately Modulation of Y-Series Non-Fullerene Acceptor for Efficient Organic Solar Cells

Xin Song et al.

Summary: A novel process-aid solid (PAS) engineering with asymmetric configuration is proposed to improve the microphase separation and component distribution of organic solar cells, leading to enhanced exciton splitting and charge collection efficiency.

ADVANCED MATERIALS (2022)

Review Chemistry, Multidisciplinary

Fused-Ring Electron Acceptors for Photovoltaics and Beyond

Jiayu Wang et al.

Summary: The emerging solar cell technologies, such as organic solar cells (OSCs) and perovskite solar cells (PSCs), are attracting attention due to advantages like easy fabrication, low cost, flexibility, and short energy payback time. The development of fused-ring electron acceptors (FREAs) has led to significant improvements in power conversion efficiencies (PCEs) of OSCs, reaching up to 18%, and has initiated a shift from fullerene-based systems to nonfullerene systems within the field.

ACCOUNTS OF CHEMICAL RESEARCH (2021)

Review Polymer Science

Benzothiadiazole-based Conjugated Polymers for Organic Solar Cells

Chao Wang et al.

Summary: Benzothiadiazole (BT) is an electron-deficient unit that can be used to construct conjugated polymers for organic solar cells, with significant progress achieved in recent years.

CHINESE JOURNAL OF POLYMER SCIENCE (2021)

Article Chemistry, Applied

Simple dithienosilole-based nonfused nonfullerene acceptor for efficient organic photovoltaics

Yaya Zhang et al.

Summary: Two nonfused small molecular acceptors based on simple dithienosilole units have been synthesized and studied for their optical, electrochemical properties, and device performance, showing promising results when combined with the polymer PBDB-T in terms of photovoltaic efficiency.

DYES AND PIGMENTS (2021)

Article Chemistry, Physical

Efficient Organic Solar Cells from Molecular Orientation Control of M-Series Acceptors

Yunlong Ma et al.

Summary: Controlling the molecular orientation of nonfullerene acceptors by adjusting side chains leads to improved device performance, with M3 showing higher efficiency compared to M32 when blended with a donor polymer such as PM6.
Article Chemistry, Physical

Simple Nonfused Ring Electron Acceptors with 3D Network Packing Structure Boosting the Efficiency of Organic Solar Cells to 15.44%

Xiaodong Wang et al.

Summary: NFREAs with increasing pi-conjugation length show enhanced molar extinction coefficient and electron mobility in blend films. The molecular conformation of 2BTh-2F is planar, supported by S···N and S···O intramolecular interactions, and it forms a 3D network packing structure compared to the 2D packing of 2Th-2F. 2BTh-2F:PBDB-T-based organic solar cells achieve a high power conversion efficiency of 14.53%, reaching a record efficiency of 15.44% when D18 is used as the donor polymer.

ADVANCED ENERGY MATERIALS (2021)

Article Nanoscience & Nanotechnology

Achieving a Higher Energy Charge-Transfer State and Reduced Voltage Loss for Organic Solar Cells using Nonfullerene Acceptors with Norbornenyl-Functionalized Terminal Groups

Wenxu Liu et al.

Summary: By incorporating a three-dimensional norbornenyl group into the terminals of nonfullerene acceptors, a novel design tactic was developed to achieve simultaneously higher energy charge-transfer state and lower energy loss, resulting in a 90 mV enhancement of open-circuit voltage in organic solar cells. The new design also improves charge carrier transport efficiency, short-circuit current density, and overall power conversion efficiency, marking an important breakthrough in the design of nonfullerene acceptor-based OSCs.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Energy & Fuels

Non-fullerene acceptors with branched side chains and improved molecular packing to exceed 18% efficiency in organic solar cells

Chao Li et al.

Summary: The molecular design of acceptor and donor molecules has significantly advanced organic photovoltaics. By introducing branched alkyl chains in non-fullerene acceptors, favorable morphology in the active layer can be achieved, leading to a certified device efficiency of 17.9%. This modification can completely alter the molecular packing behavior of non-fullerene acceptors, resulting in improved structural order and charge transport in thin films.

NATURE ENERGY (2021)

Article Chemistry, Multidisciplinary

High-Efficiency Organic Solar Cells Based on Asymmetric Acceptors Bearing One 3D Shape-Persistent Terminal Group

Hao Lu et al.

Summary: Three asymmetric non-fullerene acceptors incorporating a unique CBIC terminal group were synthesized, leading to improved solubility, enhanced crystallinity, and higher power conversion efficiency in organic solar cells compared to their symmetric counterparts. The combination of the CBIC terminal group with the asymmetric strategy shows promise in enhancing the performance of OSCs.

ADVANCED FUNCTIONAL MATERIALS (2021)

Article Chemistry, Multidisciplinary

Single-Junction Organic Photovoltaic Cell with 19% Efficiency

Yong Cui et al.

Summary: By combining material design and ternary blending strategy, a maximum power conversion efficiency of 19.0% is achieved in single-junction OPV cells. Optimized active layer structure significantly improves the photovoltaic parameters, enhancing the performance and PCE values of the cells.

ADVANCED MATERIALS (2021)

Article Chemistry, Multidisciplinary

High-performance polymer solar cells with efficiency over 18% enabled by asymmetric side chain engineering of non-fullerene acceptors

Shihao Chen et al.

Summary: The research suggests that asymmetric side-chain engineering can effectively tune the properties of non-fullerene small-molecule acceptors (NFSMAs) and improve the power conversion efficiency for binary non-fullerene polymer solar cells (NFPSCs). Introducing proper asymmetric side chains in NFSMAs can induce favorable face-on molecule orientation, enhance carrier mobilities, balance charge transport, and reduce recombination losses, leading to improved overall performance in NFPSCs.

SCIENCE CHINA-CHEMISTRY (2021)

Article Multidisciplinary Sciences

Completely non-fused electron acceptor with 3D-interpenetrated crystalline structure enables efficient and stable organic solar cell

Lijiao Ma et al.

Summary: Non-fullerene acceptors based on non-fused conjugated structures have potential for low-cost organic photovoltaic cells, but their efficiencies are lower than those of fused-ring NFAs. A new bithiophene-based non-fused core, TT-Pi, was designed, leading to the development of a completely non-fused NFA, A4T-16, which achieved a high PCE of 15.2% with 84% retention after 1300 hours under simulated AM 1.5 G illumination. This work provides insight into molecule design of non-fused NFAs through molecular geometry control.

NATURE COMMUNICATIONS (2021)

Article Chemistry, Physical

Reduced non-radiative charge recombination enables organic photovoltaic cell approaching 19% efficiency

Pengqing Bi et al.

Summary: Introducing HDO-4Cl increased the exciton diffusion length in the acceptor phase, reducing non-radiative charge recombination and improving photon utilization efficiency in PBDB-TF: eC9-based OPV cells. This led to achieving a high-efficiency OPV cell with outstanding power conversion efficiency, demonstrating the effectiveness of regulating exciton behaviors in reducing energy loss.
Review Materials Science, Multidisciplinary

PBDB-T and its derivatives: A family of polymer donors enables over 17% efficiency in organic photovoltaics

Zhong Zheng et al.

MATERIALS TODAY (2020)

Article Chemistry, Multidisciplinary

Single-Junction Organic Photovoltaic Cells with Approaching 18% Efficiency

Yong Cui et al.

ADVANCED MATERIALS (2020)

Article Chemistry, Multidisciplinary

Understanding energetic disorder in electron-deficient-core-based non-fullerene solar cells

Jun Yuan et al.

SCIENCE CHINA-CHEMISTRY (2020)

Review Chemistry, Physical

The Future of Flexible Organic Solar Cells

Kenjiro Fukuda et al.

ADVANCED ENERGY MATERIALS (2020)

Article Nanoscience & Nanotechnology

Synergistic Effect of Alkyl Chain and Chlorination Engineering on High-Performance Nonfullerene Acceptors

Daize Mo et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

Article Chemistry, Multidisciplinary

Eco-Compatible Solvent-Processed Organic Photovoltaic Cells with Over 16% Efficiency

Ling Hong et al.

ADVANCED MATERIALS (2019)

Article Chemistry, Multidisciplinary

Conformation Locking on Fused-Ring Electron Acceptor for High-Performance Nonfullerene Organic Solar Cells

Zhuohan Zhang et al.

ADVANCED FUNCTIONAL MATERIALS (2018)

Review Chemistry, Multidisciplinary

Organic Photovoltaics over Three Decades

Olle Inganaes

ADVANCED MATERIALS (2018)

Review Chemistry, Multidisciplinary

Nonfullerene Acceptor Molecules for Bulk Heterojunction Organic Solar Cells

Guangye Zhang et al.

CHEMICAL REVIEWS (2018)

Article Chemistry, Physical

Design rules for minimizing voltage losses in high-efficiency organic solar cells

Deping Qian et al.

NATURE MATERIALS (2018)

Review Chemistry, Physical

Organic solar cells based on non-fullerene acceptors

Jianhui Hou et al.

NATURE MATERIALS (2018)

Review Nanoscience & Nanotechnology

Non-fullerene acceptors for organic solar cells

Cenqi Yan et al.

NATURE REVIEWS MATERIALS (2018)

Article Nanoscience & Nanotechnology

4-Alkyl-3,5-difluorophenyl-Substituted Benzodithiophene-Based Wide Band Gap Polymers for High-Efficiency Polymer Solar Cells

Guangwu Li et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Article Nanoscience & Nanotechnology

1,8-Naphthalimide-Based Planar Small Molecular Acceptor for Organic Solar Cells

Jicheng Zhang et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Article Chemistry, Multidisciplinary

n-Type Water/Alcohol-Soluble Naphthalene Diimide-Based Conjugated Polymers for High-Performance Polymer Solar Cells

Zhihong Wu et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2016)

Article Chemistry, Multidisciplinary

An Electron Acceptor Challenging Fullerenes for Efficient Polymer Solar Cells

Yuze Lin et al.

ADVANCED MATERIALS (2015)

Article Chemistry, Multidisciplinary

Polymer Solar Cells: Solubility Controls Fiber Network Formation

Jacobus J. van Franeker et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)

Article Chemistry, Multidisciplinary

Effect of synthetic accessibility on the commercial viability of organic photovoltaics

Timothy P. Osedach et al.

ENERGY & ENVIRONMENTAL SCIENCE (2013)

Article Chemistry, Multidisciplinary

Integrated Materials Design of Organic Semiconductors for Field-Effect Transistors

Jianguo Mei et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2013)

Article Energy & Fuels

Radiative efficiency of state-of-the-art photovoltaic cells

Martin A. Green

PROGRESS IN PHOTOVOLTAICS (2012)

Article Chemistry, Multidisciplinary

Molecular Design and Ordering Effects in π-Functional Materials for Transistor and Solar Cell Applications

Pierre M. Beaujuge et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2011)

Article Materials Science, Multidisciplinary

Relating the open-circuit voltage to interface molecular properties of donor:acceptor bulk heterojunction solar cells

Koen Vandewal et al.

PHYSICAL REVIEW B (2010)

Review Chemistry, Multidisciplinary

Development of Novel Conjugated Donor Polymers for High-Efficiency Bulk-Heterojunction Photovoltaic Devices

Junwu Chen et al.

ACCOUNTS OF CHEMICAL RESEARCH (2009)

Review Chemistry, Multidisciplinary

Polymer-Fullerene Bulk-Heterojunction Solar Cells

Gilles Dennler et al.

ADVANCED MATERIALS (2009)

Review Chemistry, Multidisciplinary

Synthesis of Conjugated Polymers for Organic Solar Cell Applications

Yen-Ju Cheng et al.

CHEMICAL REVIEWS (2009)