4.6 Article

Nanoscale chemical characterization of a post-consumer recycled polyolefin blend using tapping mode AFM-IR

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Energy & Fuels

Nanoscale geochemical heterogeneity of organic matter in thermally-mature shales: An AFM-IR study

Ke Wang et al.

Summary: The study examines the organic matter in shales using AFM-IR technology to obtain nanoscale geochemical characteristics, revealing the influence of laminae on vertical hydrocarbon migration and providing insights into different organic matter in thermally-mature shales.
Article Materials Science, Characterization & Testing

Systematic analysis and nanoscale chemical imaging of polymers using photothermal-induced resonance (AFM-IR) infrared spectroscopy

A. Catarina V. D. dos Santos et al.

Summary: A reliable and time-saving protocol for measuring polymers at the nanoscale using photothermal-induced resonance (AFM-IR) was developed and successfully applied to four industrially relevant polymers in this study. The protocol allowed quick analysis and identification of major components of each polymer, including mineral fillers in the blends, without prior knowledge of sample composition.

POLYMER TESTING (2022)

Review Chemistry, Analytical

Recent advances and applications to cultural heritage using ATR-FTIR spectroscopy and ATR-FTIR spectroscopic imaging

Guan-Lin Liu et al.

Summary: Scientific investigation of cultural heritage objects is crucial for responsible conservation and archaeology, and recent advances in spectroscopy have provided opportunities for material characterization in museums. This review summarizes the applications of ATR-FTIR spectroscopy in cultural heritage studies, covering various types of artefacts such as paintings, paper, textiles, plastics, pottery, glass, and minerals.

ANALYST (2022)

Review Materials Science, Multidisciplinary

Why is Recycling of Postconsumer Plastics so Challenging?

Bryan D. Vogt et al.

Summary: The widespread use of plastics poses challenges for waste management, but innovative strategies and technologies can help achieve effective recycling and circular utilization.

ACS APPLIED POLYMER MATERIALS (2021)

Article Biochemical Research Methods

Development of an LC-MS method for the semiquantitative determination of polyamide 6 contaminations in polyolefin recyclates

Andrea Schweighuber et al.

Summary: This study presents a method for quantitative analysis of polyamide 6 in recycled polyolefins, using ε-caprolactam and related cyclic oligomers as marker compounds. High-performance liquid chromatography coupled with quadrupole time-of-flight mass spectrometry was used for method development and identification of cyclic compounds, with quantification performed using triple quadrupole mass spectrometry. Six different compounds were detected, with the cyclic trimer and tetramer demonstrated to be suitable for quantification.

ANALYTICAL AND BIOANALYTICAL CHEMISTRY (2021)

Review Engineering, Environmental

Performance modifying techniques for recycled thermoplastics

Arun Ghosh

Summary: Petro-derived commodity thermoplastics are widely used due to their cost-effective and lightweight properties, but their disposal poses environmental challenges. Recycling rates are low, and the use of performance modifiers is essential in the recycling process to improve the quality of recycled materials.

RESOURCES CONSERVATION AND RECYCLING (2021)

Article Polymer Science

Enhanced multiphase interfacial interaction of impact polypropylene copolymer by in-situ introducing polyethylene

Chao Jiang et al.

Summary: The study explores the impact of introducing polyethylene in-situ on the impact properties of impact polypropylene copolymer (IPC) and the influence of multiphase interfacial interaction on these properties. Results show that in-situ introduction of well-dispersed PE can strengthen the interface interaction, promoting the dissipation of impact energy, and enriching ethylene-propylene block copolymers at the multiphase interface. This work provides insights for the rational design of the next generation IPC with improved properties.

POLYMER (2021)

Review Engineering, Environmental

The challenges in recycling post-consumer polyolefins for food contact applications: A review

Victor S. Cecon et al.

Summary: The article reviews different predictive models and assessment methods for the safety of recycled materials, which serve as a foundation for regulatory frameworks. It also discusses potential issues during polymer processing, as harmful compounds may affect human health or degrade material properties.

RESOURCES CONSERVATION AND RECYCLING (2021)

Article Chemistry, Physical

Perovskitoid-Templated Formation of a 1D@3D Perovskite Structure toward Highly Efficient and Stable Perovskite Solar Cells

Tengfei Kong et al.

Summary: Using low dimensional perovskite is a promising strategy to improve the stability and efficiency of PSCs, achieving highly efficient and stable devices with good reproducibility. The 1D@3D PSC demonstrated high conversion efficiency and maintained high performance under different conditions in the experiment.

ADVANCED ENERGY MATERIALS (2021)

Review Multidisciplinary Sciences

Microplastic contamination of drinking water: A systematic review

Evangelos Danopoulos et al.

PLOS ONE (2020)

Article Engineering, Mechanical

Soft sample deformation, damage and induced electromechanical property changes in contact- and tapping-mode atomic force microscopy

M. A. S. R. Saadi et al.

SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES (2020)

Article Chemistry, Analytical

Nanoscale Infrared Spectroscopy and Chemometrics Enable Detection of Intracellular Protein Distribution

A. Catarina V. D. dos Santos et al.

ANALYTICAL CHEMISTRY (2020)

Review Environmental Sciences

Microplastic Contamination of Seafood Intended for Human Consumption: A Systematic Review and Meta-Analysis

Evangelos Danopoulos et al.

ENVIRONMENTAL HEALTH PERSPECTIVES (2020)

Review Chemistry, Multidisciplinary

Infrared and Raman chemical imaging and spectroscopy at the nanoscale

Dmitry Kurouski et al.

CHEMICAL SOCIETY REVIEWS (2020)

Review Biotechnology & Applied Microbiology

Current approaches to waste polymer utilization and minimization: a review

Meltem Okan et al.

JOURNAL OF CHEMICAL TECHNOLOGY AND BIOTECHNOLOGY (2019)

Article Multidisciplinary Sciences

Nanoscale infrared imaging analysis of carbonaceous chondrites to understand organic-mineral interactions during aqueous alteration

Yoko Kebukawa et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2019)

Article Social Sciences, Interdisciplinary

Future scenarios of global plastic waste generation and disposal

Laurent Lebreton et al.

PALGRAVE COMMUNICATIONS (2019)

Article Engineering, Environmental

Pollutants in Plastics within the North Pacific Subtropical Gyre

Qiqing Chen et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2018)

Article Chemistry, Analytical

Nanoscale partitioning of paclitaxel in hybrid lipid-polymer membranes

Mohit Tuteja et al.

ANALYST (2018)

Article Chemistry, Analytical

Multispectral Atomic Force Microscopy-Infrared Nano-Imaging of Malaria Infected Red Blood Cells

David Perez-Guaita et al.

ANALYTICAL CHEMISTRY (2018)

Article Chemistry, Physical

Chemical nature of ferroelastic twin domains in CH3NH3PbI3 perovskite

Yongtao Liu et al.

NATURE MATERIALS (2018)

Article Engineering, Environmental

Contamination in plastic recycling: Influence of metals on the quality of reprocessed plastic

M. K. Eriksen et al.

WASTE MANAGEMENT (2018)

Review Green & Sustainable Science & Technology

Recycling of Polymer-Based Multilayer Packaging: A Review

Katharina Kaiser et al.

RECYCLING (2018)

Article Environmental Sciences

Microplastics as contaminants in commercially important seafood species

David Santillo et al.

INTEGRATED ENVIRONMENTAL ASSESSMENT AND MANAGEMENT (2017)

Article Multidisciplinary Sciences

Production, use, and fate of all plastics ever made

Roland Geyer et al.

SCIENCE ADVANCES (2017)

Proceedings Paper Materials Science, Multidisciplinary

The effect of modified ijuk fibers to crystallinity of polypropylene composite

I. Prabowo et al.

INNOVATION IN POLYMER SCIENCE AND TECHNOLOGY 2016 (IPST 2016) (2017)

Article Biochemical Research Methods

Chloroform induces outstanding crystallization of poly(hydroxybutyrate) (PHB) vesicles within bacteria

Rolando Rebois et al.

ANALYTICAL AND BIOANALYTICAL CHEMISTRY (2017)

Article Materials Science, Multidisciplinary

Contribution of High-shear Processing to the Compatibilization of (PP/EPR)/PE Ternary Blends

Molka Louizi et al.

MACROMOLECULAR MATERIALS AND ENGINEERING (2014)

Article Materials Science, Multidisciplinary

Low pressure and low temperature synthesis of polyamide-6 (PA6) using Na0 as catalyst

Juan C. Farias-Aguilar et al.

MATERIALS LETTERS (2014)

Article Multidisciplinary Sciences

scikit-image: image processing in Python

Stefan van der Walt et al.

Article Materials Science, Multidisciplinary

Effect of EPDM as a compatibilizer on mechanical properties and morphology of PP/LDPE blends

Nina Vranjes Penava et al.

JOURNAL OF ELASTOMERS AND PLASTICS (2013)

Article Engineering, Environmental

Recycling-oriented characterization of polyolefin packaging waste

Bin Hu et al.

WASTE MANAGEMENT (2013)

Article Physics, Applied

Theory of infrared nanospectroscopy by photothermal induced resonance

A. Dazzi et al.

JOURNAL OF APPLIED PHYSICS (2010)

Article Polymer Science

Mechanism of the temperature-dependent degradation of polyamide 66 films exposed to water

Elsa Silva Goncalves et al.

POLYMER DEGRADATION AND STABILITY (2007)

Article Polymer Science

Adhesion of polyethylene blends to polypropylene

BC Poon et al.

POLYMER (2004)