☆ 4.6 Article

Advanced cathodic free-standing interlayers for lithium-sulfur batteries: understanding, fabrication, and modification

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Energy & Fuels

Lightweight freestanding hollow carbon fiber interlayer for high-performance lithium-sulfur batteries

Qinglong Meng et al.

Summary: A freestanding hollow carbon fiber derived from waste cotton tissues was designed as an interlayer for lithium-sulfur batteries to accelerate reaction kinetics and restrain the Shuttling Effect. The carbon interlayer, carbonized at different temperatures, was able to enhance cycling stability with rich pore structures and exceptional flexibility.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2022)

添加到收藏夹

Article Chemistry, Physical

Molybdenum disulfide/polyaniline interlayer for lithium polysulphide trapping in lithium-sulphur batteries

Daniele Versaci et al.

Summary: The lithium-sulphur battery technology offers higher energy storage capacity but faces commercialization challenges, mainly due to the shuttle phenomenon caused by soluble long chain LiPSs. Recent advancements in interlayer separators aim at physically blocking LiPSs to improve battery performance.

JOURNAL OF POWER SOURCES (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Cotton-Derived Fe/Fe3C-Encapsulated Carbon Nanotubes for High-Performance Lithium-Sulfur Batteries

Ruoxi Chen et al.

Summary: Fabrication processes of carbon nanomaterials derived from fossil fuels have high carbon emissions. This study proposes a low-cost and sustainable approach to produce multiwalled carbon nanotubes (MWCNTs) from cotton, a abundant biomass material. The MWCNTs show enhanced stability and performance when used in a lithium-sulfur battery.

NANO LETTERS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

A flame-retardant polyimide interlayer with polysulfide lithium traps and fast redox conversion towards safety and high sulfur utilization Li-S batteries

Zhiyu Zhou et al.

Summary: This study developed a flame-retardant, multifunctional interlayer to enhance the electrochemical performance and safety of Li-S batteries, addressing issues such as reduced capacities, cycling instabilities, and safety concerns. The interlayer effectively adsorbs polysulfides and suppresses the shuttle effect, leading to impressive initial discharge capacities and high capacity retentions over multiple cycles. Additionally, the interlayer acts as a flame-retardant layer, promoting safer working conditions for Li-S batteries.

NANOSCALE (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Synthesis of Titanium Molybdenum Nitride-Decorated Electrospun Carbon Nanofiber Membranes as Interlayers to Suppress Polysulfide Shuttling in Lithium-Sulfur Batteries

Ying Zhu et al.

Summary: This study successfully prepared a flexible interlayer composed of titanium molybdenum nitride solid solution nanoparticles decorated on electrospun carbon nanofibers, which exhibited excellent adsorption and catalytic capacity in lithium-sulfur batteries. The dissolved amount of Mo in TiN could be precisely controlled by regulating the mass ratio of precursors, resulting in improved cell capacity.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Regulating Li+ migration and Li2S deposition by metal-organic framework-derived Co4S3-embedded carbon nanoarrays for durable lithium-sulfur batteries

Jianbin Liu et al.

Summary: By fabricating a self-supported interlayer based on carbon cloth and applying it in lithium-sulfur batteries, the polysulfide shuttle is effectively suppressed, lithium ion conduction is facilitated, and sulfur utilization is improved, resulting in high-performance lithium-sulfur batteries.

SCIENCE CHINA-MATERIALS (2022)

添加到收藏夹

Article Engineering, Environmental

Electrospun CoSe@NC nanofiber membrane as an effective polysulfides adsorption-catalysis interlayer for Li-S batteries

Xiangli Jiang et al.

Summary: By using CoSe@NC nanofiber membrane as an interlayer, the rate performance and cycling stability of Li-S batteries can be improved. Through adsorption-catalysis synergy, the CoSe@NC membrane effectively removes and converts polysulfides, resulting in a high initial reversible discharge capacity of 1317 mAh g-1 and a low capacity decay rate after long cycle.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Engineering, Environmental

Anchoring Mo2C nanoparticles on vertical graphene nanosheets as a highly efficient catalytic interlayer for Li-S batteries

Yangcheng Mo et al.

Summary: By preparing a multifunctional interlayer consisting of Mo2C nanoparticles anchored on vertical graphene nanosheets (VGSs) grown on short carbon nanofibers (CNFs), supported on carbon cloth decorated with VGSs (CG-CFG@Mo2C), the interconversion between sulfur and lithium polysulfides in lithium-sulfur batteries can be accelerated and the shuttle effect can be suppressed. The Li-S batteries with CG-CFG@Mo2C interlayer exhibit ultra-high initial specific discharge capacity, high sulfur utilization rate, remarkable rate performance, and high area capacity, demonstrating its high application potential.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Chemistry, Physical

Cerium oxide nanorods anchored on carbon nanofibers derived from cellulose paper as effective interlayer for lithium sulfur battery

Sakibul Azam et al.

Summary: In this study, cellulose paper-derived carbon fiber decorated with CeO2 nanorods was fabricated and used as an interlayer material for lithium sulfur battery. The binding of lithium polysulfides by CeO2 and the physical blocking effect of conducting carbon fiber contributed to the improved performance of the battery in terms of cycle life and capacity.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Synthesis of double-layered hollow carbon spheres with large interlayer space as sulfur hosts for Li-S batteries

Haoxiang Zhong et al.

Summary: In this study, DLHC-50 with interlayer distances up to 50 nm was successfully synthesized by controlling the hydrolysis rate of tetraethyl orthosilicate. The DLHC-50 based sulfur cathode showed high sulfur content of 82% and exhibited excellent cycling and rate performances, providing guidance for the synthesis of DLHC with high sulfur utilization.

MATERIALS LETTERS (2022)

添加到收藏夹

Article Engineering, Chemical

Engineering zirconium-based metal-organic framework-801 films on carbon cloth as shuttle-inhibiting interlayers for lithium-sulfur batteries

Gaofeng Jin et al.

Summary: The newly developed interlayer for lithium-sulfur batteries has a hierarchical porous structure that helps immobilize lithium polysulfides and accommodate volume expansion. Furthermore, the MOF-801 material can strongly adsorb lithium polysulfides and promote their catalytic conversion.

FRONTIERS OF CHEMICAL SCIENCE AND ENGINEERING (2022)

添加到收藏夹

Article Chemistry, Physical

Highly catalytic porous MoN nanosheets anchored carbon microtubes interlayer for lithium-sulfur batteries

Xin Zhou et al.

Summary: In this work, porous and catalytic MoN nanosheets were fabricated on a conductive carbonized cotton cloth to serve as an interlayer for lithium-sulfur batteries (LSBs). The porous structure of MoN nanosheets provides abundant catalytic sites and accelerates the conversion kinetics of lithium-polysulfides (LiPSs). Additionally, the conductive carbonized cotton cloth can physically restrain LiPSs and act as a secondary current collector. The combination of MoN nanosheets and conductive carbonized cotton cloth synergistically enhances the trapping and conversion ability of polysulfides.

MATERIALS TODAY ENERGY (2022)

添加到收藏夹

Article Chemistry, Applied

ZIF-7@carbon composites as multifunctional interlayer for rapid and durable Li-S performance

Xingbo Wang et al.

Summary: A novel ZIF-7@carbon composite was developed as a multifunctional interlayer for lithium-sulfur batteries, addressing the shuttle effect of polysulfide and slow conversion kinetics. The composite's directional layered structure provides abundant active sites for accelerated redox reactions and efficient conversion of polysulfide. Li-S batteries with this interlayer showed a considerable areal capacity and impressive cyclability with extremely low capacity-fading rate.

JOURNAL OF ENERGY CHEMISTRY (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Self-crystallized Interlayer Integrating Polysulfide-adsorbed TiO2/TiO and Highly-electron-conductive TiO for High-stability Lithium-sulfur Batteries

Xinzhe Yang et al.

Summary: The research introduced a carbon fiber paper supported TiO2/TiO interlayer to suppress the shuttle effect in lithium sulfur batteries and enhance electrical conductivity. This design achieved high capacities and excellent cycling performance.

CHEMICAL RESEARCH IN CHINESE UNIVERSITIES (2021)

添加到收藏夹

Article Chemistry, Analytical

Hybrid TiO-TiO2 nanoparticle/B-N co-doped CNFs interlayer for advanced LiS batteries

Jinghui Zhu et al.

Summary: A novel composite nanofiber consisting of TiO-TiO2 heterostructure nanoparticles and BNCNF has been successfully prepared for LiS batteries, showing outstanding cycling stability and high discharge capacity, especially at high current density.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2021)

添加到收藏夹

Article Electrochemistry

Highly oriented MIL-101(Cr) continuous films grown on carbon cloth as efficient polysulfide barrier for lithium-sulfur batteries

Feng Zhang et al.

Summary: In this study, a highly oriented MIL-101(Cr) continuous film was developed on carbon cloth and used as a reliable interlayer for lithium-sulfur batteries. This interlayer possesses a unique hierarchical porous structure and abundant active sites, providing efficient confinement of polysulfides and promoting the conversion of polysulfides. The composite interlayer exhibited excellent rate performance, cycle stability and areal specific capacity under high sulfur loading.

ELECTROCHIMICA ACTA (2021)

添加到收藏夹

Article Chemistry, Physical

Identifying the active sites and multifunctional effects in nitrogen-doped carbon microtube interlayer for confining-trapping-catalyzing polysulfides

Narui Li et al.

Summary: A self-standing nitrogen-doped carbonized cotton cloth (N-CCC) interlayer with multifunctional active sites is reported for lithium-sulfur batteries, showing improved performance and stability. The N-CCC interlayer enables high capacity and stability, as well as competitive performance at high current density and sulfur loading. This research provides a rational mechanism analysis for practical high-energy/power density LSBs.

NANO ENERGY (2021)

添加到收藏夹

Article Chemistry, Analytical

Attapulgite and multiwalled carbon nanotubes co-integrated hierarchical porous polyacrylonitrile membrane as a multifunctional interlayer for lithium-sulfur batteries with enhanced performance

Qinxing Xie et al.

Summary: A functional interlayer consisting of attapulgites and multiwalled carbon nanotubes has been fabricated, showing improved performance in lithium-sulfur batteries. The composite membrane is cost-effective and effective, demonstrating great potential for high performance energy storage applications.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Nanolayer GO coated CNT film interlayer for lithium-sulfur batteries with enhanced cycling stability

Bin Xu et al.

Summary: A nanoscale-thick graphene oxide layer was coated onto the surface of a carbon nanotube film for Li-S batteries, which improved cycling stability and reversible capacity of the battery.

MATERIALS LETTERS (2021)

添加到收藏夹

Article Engineering, Environmental

Manipulation of porosity and electrochemical artificial separator interphase for durable lithium-sulfur batteries

Zhentao Nie et al.

Summary: By controlling the pore size of mesoporous carbon spheres and using carbon cloth as an intermediate layer between the cathode and separator, the cycle stability and specific capacity of lithium-sulfur batteries can be significantly improved.

CHEMICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Graphene-based interlayer for high-performance lithium-sulfur batteries: A review

Yong Liu et al.

Summary: Graphene has been widely investigated as an intermediate layer in Li-S batteries to overcome problems like the insulating characteristic of sulfur and unsatisfactory cycling life. Strategies such as physical and chemical confinement have been utilized to enhance the electrochemical performance of graphene-based interlayers for Li-S batteries. Challenges and prospects for future research in utilizing graphene-based materials in Li-S batteries have been proposed in this review.

MATERIALS & DESIGN (2021)

添加到收藏夹

Article Electrochemistry

Electrochemical Behavior Promotion of Polysulfides by Cobalt Selenide/Carbon Cloth Interlayer in Lithium-Sulfur Batteries

Zhaowei Ren et al.

Summary: The CoSe2/CC composite material shows promising potential in lithium-sulfur batteries by limiting the shuttle effect of polysulfides and accelerating the kinetics of sulfur chemistry, leading to excellent cycle stability.

CHEMELECTROCHEM (2021)

添加到收藏夹

Article Chemistry, Physical

Nitrogen-Doped Graphene Quantum Dots: Sulfiphilic Additives for the High-Performance Li-S Cells

Jungjin Park et al.

Summary: Nitrogen-doped graphene quantum dots as a sulfur-affinitive additive show promising potential in improving the performance of Li-S cells, achieving high cycle retention and capacity retention. Experimental results demonstrate that Li-S cells decorated with nitrogen-doped graphene quantum dots exhibit excellent performance indicators, indicating their potential application prospects.

ACS APPLIED ENERGY MATERIALS (2021)

添加到收藏夹

Article Chemistry, Analytical

Tow-dimensional metal organic framework decorated porous carbon fiber as efficient interlayer for lithium-sulfur battery

Xingbo Wang et al.

Summary: By growing ZIF-7 nanosheets MOF on PCF, researchers successfully fabricated an efficient interlayer composite with a double cross-linked structure, which can effectively mitigate the shuffling effect of LiPS in lithium-sulfur batteries. The unique design of ZIF-7@PCF interlayer demonstrates excellent performance in high-rate and long-term cycling tests for lithium-sulfur batteries.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

A multifunctional UiO-66@carbon interlayer as an efficacious suppressor of polysulfide shuttling for lithium-sulfur batteries

Shaoning Zheng et al.

Summary: The UiO-66@CC interlayer effectively inhibits the shuttle effect in lithium-sulfur batteries and achieves fast redox kinetics by providing sufficient adsorption and catalytic sites. It improves the cycling stability, rate performance, specific capacity, and area capacity of the battery, leading to nearly 100% capacity retention after 100 cycles and a decay rate of 0.07% over 600 cycles.

NANOTECHNOLOGY (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Integrated Design of Interlayer/Current-Collector: Heteronanowires Decorated Carbon Microtube Fabric for High-Loading and Lean-Electrolyte Lithium-Sulfur Batteries

Narui Li et al.

Summary: This study proposes a new energy storage material that addresses the challenges of low sulfur loading, high E/S ratio, and slow sulfur redox reactions in lithium-sulfur batteries. By using a self-standing hollow carbonized cotton cloth decorated with TiO2-TiN heteronanowires, an integrated interlayer/current-collector cathode with excellent performance is achieved, enabling high sulfur loading and charging capacity.

SMALL (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Vertically Aligned Sulfiphilic Cobalt Disulfide Nanosheets Supported on a Free-Standing Carbon Nanofiber Interlayer for High-Performance Lithium-Sulfur Batteries

Hyunseok Yoon et al.

Summary: A new interlayer material for lithium-sulfur batteries, consisting of porous cobalt disulfide nanosheets vertically grown on activated cellulose-derived carbon nanofibers, has been reported. This material provides superior high-rate performance and stability due to its unique architecture.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Sandwiched Cathodes Assembled from CoS2-Modified Carbon Clothes for High-Performance Lithium-Sulfur Batteries

Jun Xu et al.

Summary: The design of advanced cathodes utilizing CC-CoS2 has shown high rate capability and excellent capacity retention in lithium-sulfur batteries. The sandwiched structure with active catalytic component contributes to the outstanding electrochemical performance, enabling high reversible capacities even at high sulfur loadings.

ADVANCED SCIENCE (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Super-aligned films of sub-1 nm Bi2O3-polyoxometalate nanowires as interlayers in lithium-sulfur batteries

Simin Zhang et al.

Summary: Sub-1 nm nanowires (SNWs) possess polymer-analogue properties and can be processed like polymers, while also exhibiting multifunctions due to their well-manipulated compositions and structures. Well-designed multicomponent heterostructure SNWs can enhance their multifunction performance, but achieving such SNWs at sub-nanoscale is challenging. This study demonstrates the potential of heterostructure SNWs to improve the performance of Li-S batteries.

SCIENCE CHINA-MATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Advances in multi-functional flexible interlayers for Li-S batteries and metal-based batteries

Jian-Qiu Huang et al.

Summary: In the past two decades, significant attention has been paid to developing novel electrodes to enhance battery performance. The introduction of multi-functional freestanding films called interlayers between anodes and cathodes has proven to be crucial in improving the electrochemical performance of batteries. These interlayers play essential roles in various rechargeable battery systems, offering opportunities for advanced battery development through structural design, component optimization, and function mechanism assessment.

MATERIALS TODAY COMMUNICATIONS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Decoration of carbon nanofibers with bimetal sulfides as interlayer for high performance lithium-sulfur battery

Xing Zhang et al.

Summary: This study enhanced the cycle stability and capacity retention rate of Li-S batteries by preparing NiCo2S4-CNFs interlayer, which initially delivered a specific capacity of 1421 mAh g(-1) and maintained at 918 mAh g(-1) after 200 cycles. After 500 cycles, the reversible specific capacity remained at 515 mAh g(-1) with extremely low capacity decay of 0.06% per cycle.

MATERIALS TODAY COMMUNICATIONS (2021)

添加到收藏夹

Article Chemistry, Physical

Nitrogen and Oxygen Dual Self-Doped Flexible PPTA Nanofiber Carbon Paper as an Effective Interlayer for Lithium-Sulfur Batteries

Ling Meng et al.

Summary: The shuttle effect of polysulfides during charge and discharge processes in Li-S batteries has been effectively inhibited by a flexible nanofiber carbon paper, leading to improved electrochemical reaction kinetics and high performance. The cells with PPTA/CF carbon paper exhibit high initial discharge capacity and excellent reversible discharge capacity, showing promising applications for high-performance lithium-sulfur batteries.

ACS APPLIED ENERGY MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Freestanding interlayers for Li-S batteries: design and synthesis of hierarchically porous N-doped C nanofibers comprising vanadium nitride quantum dots and MOF-derived hollow N-doped C nanocages

Rakesh Saroha et al.

Summary: The introduction of a functional interlayer between the cathode and anode in lithium-sulfur battery technology leads to significant improvements in electrochemical performance. Hierarchically structured porous, conductive, and multifunctional N-doped carbon nanofibers are developed as functional interlayers for advanced LSBs, enhancing the rate capability and stable cycling performance of the Li-S cell.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

添加到收藏夹

Review Chemistry, Physical

The lithium metal anode in Li-S batteries: challenges and recent progress

Haeji Hong et al.

Summary: As research focuses shift towards the development of lithium-sulfur batteries, addressing key degradation of the metal anode and suppressing related side reactions are crucial steps towards commercialization. However, technical challenges surrounding the lithium metal anode must be overcome to enable practical applications and stimulate progress in parallel energy storage technologies.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Manganese dioxide nanosheet coated carbon cloth as a multifunctional interlayer for advanced lithium-sulfur batteries

Huayun Liu et al.

Summary: The carbonized cotton cloth decorated with manganese dioxide nanosheets serves as a multifunctional interlayer in batteries, exhibiting dual functions for improved electrochemical capability. After 300 cycles, the battery with this interlayer shows a capacity decay of only 0.063% per cycle.

MATERIALS ADVANCES (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

A Hierarchical Three-Dimensional Porous Laser-Scribed Graphene Film for Suppressing Polysulfide Shuttling in Lithium-Sulfur Batteries

Eman Alhajji et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Sandwich-like Catalyst-Carbon-Catalyst Trilayer Structure as a Compact 2D Host for Highly Stable Lithium-Sulfur Batteries

Rongrong Li et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

添加到收藏夹

Article Electrochemistry

Efficiently immobilizing and converting polysulfide by a phosphorus doped carbon microtube textile interlayer for high-performance lithium-sulfur batteries

Bangbei Zheng et al.

ELECTROCHIMICA ACTA (2020)

添加到收藏夹

Article Chemistry, Physical

Interface engineering by atomically thin layer tungsten disulfide catalyst for high performance Li-S battery

Mei Er Pam et al.

MATERIALS TODAY ENERGY (2020)

添加到收藏夹

Review Chemistry, Physical

A review of cathode materials in lithium-sulfur batteries

Liwen Yang et al.

IONICS (2020)

添加到收藏夹

Article Engineering, Chemical

Recent advances in interlayer and separator engineering for lithium-sulfur batteries

Deming Zhu et al.

Journal of Energy Chemistry (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Carbon Microtube Textile with MoS2Nanosheets Grown on Both Outer and Inner Walls as Multifunctional Interlayer for Lithium-Sulfur Batteries

Jiaye Yang et al.

ADVANCED SCIENCE (2020)

添加到收藏夹

Article Engineering, Environmental

A multifunctional SnO2-nanowires/carbon composite interlayer for high- performance lithium-sulfur batteries

Hyunwoo Ahn et al.

CHEMICAL ENGINEERING JOURNAL (2020)

添加到收藏夹

Article Chemistry, Physical

Ultrathin MnO2 Sheet Arrays Grown on Hollow Carbon Fibers as Effective Polysulfide-Blocking Interlayers for High-Performance Li-S Batteries

Guojie Chao et al.

ACS APPLIED ENERGY MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

Atomic Layer Deposition of Single Atomic Cobalt as a Catalytic Interlayer for Lithium-Sulfur Batteries

Qingyang Lin et al.

ACS APPLIED ENERGY MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

A Freestanding Flexible Single-Atom Cobalt-Based Multifunctional Interlayer toward Reversible and Durable Lithium-Sulfur Batteries

Yiju Li et al.

SMALL METHODS (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Lightweight Freestanding CeF3 Nanorod/Carbon Nanotube Composite Interlayer for Lithium-Sulfur Batteries

Kunyang Zou et al.

ACS APPLIED NANO MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

Self-assembly of MoO3-decorated carbon nanofiber interlayers for high-performance lithium-sulfur batteries

Huilan Li et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2020)

添加到收藏夹

Article Electrochemistry

A light-weight free-standing graphene foam-based interlayer towards improved Li-S cells

Ruowei Yi et al.

ELECTROCHIMICA ACTA (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Graphene Oxide/Carbon Nanotube Bilayer Flexible Membrane for High-Performance Li-S Batteries with Superior Physical and Electrochemical Properties

Dong Kyu Lee et al.

ADVANCED MATERIALS INTERFACES (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Amplification of future energy demand growth due to climate change

Bas J. van Ruijven et al.

NATURE COMMUNICATIONS (2019)

添加到收藏夹

Article Chemistry, Inorganic & Nuclear

ZnO/carbon nanotube/reduced graphene oxide composite film as an effective interlayer for lithium/sulfur batteries

Zhenghao Sun et al.

SOLID STATE SCIENCES (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Mitigation of Shuttle Effect in Li-S Battery Using a Self-Assembled Ultrathin Molybdenum Disulfide Interlayer

Xiaoyun Yu et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Chemistry, Physical

Freestanding cellulose paper-derived carbon/Fe/Fe3C with enhanced electrochemical kinetics for high-performance lithium-sulfur batteries

Yu-Jiao Zhang et al.

CARBON (2019)

添加到收藏夹

Article Chemistry, Analytical

Multifunctional porous VN nanowires interlayer as polysulfides barrier for high performance lithium sulfur batteries

Peng Wang et al.

JOURNAL OF ELECTROANALYTICAL CHEMISTRY (2019)

添加到收藏夹

Article Engineering, Chemical

Carbonized regenerated silk nanofiber as multifunctional interlayer for high-performance lithium-sulfur batteries

Keshi Wu et al.

JOURNAL OF MEMBRANE SCIENCE (2019)

添加到收藏夹

Article Chemistry, Physical

Elevated polysulfide regulation by an ultralight all-CVD-built ReS2@N-Doped graphene heterostructure interlayer for lithium-sulfur batteries

Nan Wei et al.

NANO ENERGY (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

A wet-laid carbon paper with 3D conductive structure as an interlayer for lithium-sulfur batteries

Yao Li et al.

MATERIALS RESEARCH EXPRESS (2019)

添加到收藏夹

Review Chemistry, Physical

Metal-organic frameworks for lithium-sulfur batteries

Yan Zheng et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Waste cotton cloth derived carbon microtube textile: a robust and scalable interlayer for lithium-sulfur batteries

Bangbei Zheng et al.

CHEMICAL COMMUNICATIONS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Nitrogen-doped graphene fiber webs for multi-battery energy storage

Woon Gie Chong et al.

NANOSCALE (2019)

添加到收藏夹

Article Chemistry, Physical

Ultrathin MOF nanosheet assembled highly oriented microporous membrane as an interlayer for lithium-sulfur batteries

Meng Tian et al.

ENERGY STORAGE MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

SiO2@MoS2 core-shell nanocomposite layers with high lithium ion diffusion as a triple polysulfide shield for high performance lithium-sulfur batteries

Jingyi Wu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

A functional interlayer as a polysulfides blocking layer for high-performance lithium-sulfur batteries

Lingxia Yin et al.

NEW JOURNAL OF CHEMISTRY (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Self-assembled layer-by-layer partially reduced graphene oxide-sulfur composites as lithium-sulfur battery cathodes

Cen Yao et al.

RSC ADVANCES (2018)

添加到收藏夹

Article Chemistry, Physical

Ultrathin HfO2-modified carbon nanotube films as efficient polysulfide barriers for Li-S batteries

Weibang Kong et al.

CARBON (2018)

添加到收藏夹

Article Chemistry, Physical

Tungsten Disulfide Catalysts Supported on a Carbon Cloth Interlayer for High Performance Li-S Battery

Jungjin Park et al.

ADVANCED ENERGY MATERIALS (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Controllably Designed Vice-Electrode Interlayers Harvesting High Performance Lithium Sulfur Batteries

Youchen Hao et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

添加到收藏夹

Article Chemistry, Physical

Carbonized cellulose paper as an effective interlayer in lithium-sulfur batteries

Shiqi Li et al.

APPLIED SURFACE SCIENCE (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

High -Performance Lithium-Sulfur Batteries with a Self-Assembled Multiwall Carbon Nanotube Interlayer and a Robust Electrode Electrolyte Interface

Hee Min Kim et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

添加到收藏夹

Article Chemistry, Physical

Porous graphene oxide/carbon nanotube hybrid films as interlayer for lithium-sulfur batteries

Jian-Qiu Huang et al.

CARBON (2016)

添加到收藏夹

Article Chemistry, Physical

The enhancement of polysulfide absorbsion in Li-S batteries by hierarchically porous CoS2/carbon paper interlayer

Zhaoling Ma et al.

JOURNAL OF POWER SOURCES (2016)

添加到收藏夹

Article Chemistry, Physical

A free-standing sulfur-doped microporous carbon interlayer derived from luffa sponge for high performance lithium-sulfur batteries

Juan Yang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

添加到收藏夹

Article Chemistry, Physical

Mesoporous Carbon Inter layers with Tailored Pore Volume as Polysulfide Reservoir for High-Energy Lithium-Sulfur Batteries

Juan Balach et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2015)

添加到收藏夹

Article Chemistry, Physical

Enhanced performance of lithium sulfur battery with self-assembly polypyrrole nanotube film as the functional interlayer

Guoqiang Ma et al.

JOURNAL OF POWER SOURCES (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

A polypyrrole-supported carbon paper acting as a polysulfide trap for lithium-sulfur batteries

Feng Wu et al.

RSC ADVANCES (2015)

添加到收藏夹

Article Multidisciplinary Sciences

Electrocatalysis of Lithium Polysulfides: Current Collectors as Electrodes in Li/S Battery Configuration

Ganguli Babu et al.

SCIENTIFIC REPORTS (2015)

添加到收藏夹

Article Chemistry, Applied

Core@shell sulfur@polypyrrole nanoparticles sandwiched in graphene sheets as cathode for lithium-sulfur batteries

Xiangyang Zhou et al.

JOURNAL OF ENERGY CHEMISTRY (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Carbonized Eggshell Membrane as a Natural Polysulfide Reservoir for Highly Reversible Li-S Batteries

Sheng-Heng Chung et al.

ADVANCED MATERIALS (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Natural Carbonized Leaf as Polysulfide Diffusion Inhibitor for High-Performance Lithium-Sulfur Battery Cells

Sheng-Heng Chung et al.

CHEMSUSCHEM (2014)

添加到收藏夹

Article Chemistry, Physical

Enhanced cycle performance of Li-S battery with a polypyrrole functional interlayer

Guoqiang Ma et al.

JOURNAL OF POWER SOURCES (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

From filter paper to carbon paper and toward Li-S battery interlayer

Kai Zhang et al.

MATERIALS LETTERS (2014)

添加到收藏夹

Article Chemistry, Physical

Improved lithium-sulfur cells with a treated carbon paper interlayer

Chenxi Zu et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2013)

添加到收藏夹

Article Chemistry, Physical

Reactivation of dissolved polysulfides in Li-S batteries based on atomic layer deposition of Al2O3 in nanoporous carbon cloth

Xiaogang Han et al.

NANO ENERGY (2013)

添加到收藏夹

Article Chemistry, Multidisciplinary

A new approach to improve cycle performance of rechargeable lithium-sulfur batteries by inserting a free-standing MWCNT interlayer

Yu-Sheng Su et al.

CHEMICAL COMMUNICATIONS (2012)

添加到收藏夹

Article Multidisciplinary Sciences

Lithium-sulphur batteries with a microporous carbon paper as a bifunctional interlayer

Yu-Sheng Su et al.

NATURE COMMUNICATIONS (2012)

添加到收藏夹

Article Chemistry, Physical

A highly ordered nanostructured carbon-sulphur cathode for lithium-sulphur batteries

Xiulei Ji et al.

NATURE MATERIALS (2009)

添加到收藏夹

Article Electrochemistry

Polysulfide shuttle study in the Li/S battery system

YV Mikhaylik et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2004)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.