☆ 3.8 Proceedings Paper

A short review on mechanical properties of SLM titanium alloys based on recent research works

MATERIALS TODAY-PROCEEDINGS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Mechanical

Effects of heat treatment on microstructure and mechanical properties of selective laser melted Ti-6Al-4V lattice materials

Nan Jin et al.

Summary: The study investigates the relationship between microstructure and mechanical properties of titanium lattice materials fabricated by selective laser melting (SLM) with different heat treatments. The results show that the bending-dominated structure BCC is more sensitive to heat treatment conditions, with the optimal temperatures being 920 degrees C for BCC and 750 degrees C for FCC. A numerical simulation model was also established to depict the relationship between the mechanical properties of the base material and the lattice materials.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Microstructure evolution and mechanical properties of in-situ Ti6Al4V-TiB composites manufactured by selective laser melting

Zhiguang Zhou et al.

Summary: In situ TiB reinforced titanium matrix composites were fabricated via selective laser melting, with optimized processing to achieve crack-free and fully dense composites. The distribution of TiB reinforcement in the composites was mainly in the form of whisker clusters, showing different distributions in TMC1 and TMC2. The improvement in mechanical properties of the composites was attributed to Hall-Petch strengthening and load-bearing transformation strengthening.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Article Optics

Mechanical performance of simple cubic architected titanium alloys fabricated via selective laser melting

Yingang Liu et al.

Summary: The addition of Mo to Ti-6Al-4V alloy can effectively increase the content of beta phase, suppress the formation of martensite, and improve the fracture ductility and energy absorption capacity of the alloy.

OPTICS AND LASER TECHNOLOGY (2021)

添加到收藏夹

Article Optics

Refined microstructure and enhanced wear resistance of titanium matrix composites produced by selective laser melting

Jianbo Jin et al.

Summary: The study investigated the effect of TiB2 content on the microstructure and wear resistance of titanium matrix composites fabricated by selective laser melting. It was found that increasing TiB2 content refined the microstructure and improved the wear resistance by inducing strengthening and hardening effects. Additionally, the in-situ reaction of TiB2 with Ti matrix during SLM resulted in the formation of TiB and refinement of Ti matrix, leading to enhanced properties of the composites.

OPTICS AND LASER TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure evolution and mechanical properties of a lamellar near-α titanium alloy treated by laser shock peening

Weiju Jia et al.

Summary: Laser shock peening (LSP) treatment on lamellar Ti834 alloy results in a strengthened layer on the surface, increased micro-hardness, elevated compressive residual stress, and the formation of specific microstructural features such as sub-grains and dislocation cells.

VACUUM (2021)

添加到收藏夹

Article Engineering, Chemical

Selective laser melting of graphene reinforced titanium matrix composites: Powder preparation and its formability

Kaijie Lin et al.

Summary: Graphene is used as reinforcement in titanium matrix composites (TMCs) to enhance performance, with selective laser melting (SLM) showing great potential in fabrication. The study investigated the effects of ball milling time on properties of composite powder and formability of SLM. Results showed that 5-hour ball-milled composite powder had good sphericity and flowability. The optimized SLM-processed graphene reinforced TMCs exhibited higher microhardness and tensile strength compared to SLM-processed TC4.

ADVANCED POWDER TECHNOLOGY (2021)

添加到收藏夹

Article Chemistry, Physical

Super-high-strength graphene/titanium composites fabricated by selective laser melting

Q. Yan et al.

Summary: In this study, graphene nanosheet (GNS)-reinforced Ti-6Al-4V matrix composite was successfully fabricated using selective laser melting (SLM) process, which exhibited super-high tensile strength and high Young's modulus. The locally reacted GNSs and in-situ formed ultrafine TiC particles were found to be the main contributors to the outstanding mechanical properties of the composite.

CARBON (2021)

添加到收藏夹

Review Engineering, Manufacturing

Selective laser melting of Ti6Al4V alloy: Process parameters, defects and post-treatments

Anil Kumar Singla et al.

Summary: This review critically examines the important contributions related to selective laser melting (SLM) process parameters, defects, and post-processing techniques for Ti6Al4V alloy. Proper selection of process parameters and post-treatment methods are crucial in improving mechanical behavior of SLMed components. Efforts have been made to identify correlations between SLM parameters and defects, as well as analyzing the impact of post-processing approaches on mechanical behavior and biocompatibility of SLM-fabricated Ti6Al4V alloy.

JOURNAL OF MANUFACTURING PROCESSES (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Microstructure and mechanical properties of B modified Ti-Fe alloy manufactured by casting, forging and laser melting deposition

Jingzhe Niu et al.

Summary: The study introduced a newly designed Ti-2Fe-0.1B alloy manufactured by laser melting deposition method, resulting in fully equiaxed grain morphology and increased ultimate tensile strength. The research revealed the significant impact of cooling speed on TiB morphology and Ti-2Fe-0.1B grain size.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Article Engineering, Mechanical

Effect of heat treatment on microstructure and tribological behavior of Ti?6Al?4V alloys fabricated by selective laser melting

Jiang Ju et al.

Summary: The study found that the wear rate of Ti6Al4V alloy initially increased and then gradually decreased with increasing heat treatment temperature, with the lowest value obtained at 1060℃, showing the best wear resistance. Higher applied loads led to larger wear rates and lower coefficients of friction. The wear mechanism was dependent on microstructure transformation, micro-hardness, and applied load, which were discussed in detail.

TRIBOLOGY INTERNATIONAL (2021)

添加到收藏夹

Article Engineering, Mechanical

Effects of build direction on tensile and fatigue performance of selective laser melting Ti6Al4V titanium alloy

Wenbo Sun et al.

INTERNATIONAL JOURNAL OF FATIGUE (2020)

添加到收藏夹

Article Engineering, Industrial

Selective laser melting of Ti-22Al-25Nb intermetallic: Significant effects of hatch distance on microstructural features and mechanical properties

Y. H. Zhou et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effects of selective laser melting build orientations on the microstructure and tensile performance of Ti-6Al-4V alloy

Zongyu Xie et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Selective laser melting of near-α titanium alloy Ti-6Al-2Zr-1Mo-1V: Parameter optimization, heat treatment and mechanical performance

Chao Cai et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Variant selection of α precipitation in a beta titanium alloy during selective laser melting and its influence on mechanical properties

Qi Liu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

添加到收藏夹

Article Engineering, Manufacturing

Microstructure and mechanical properties of titanium alloy/zirconia functionally graded materials prepared by laser additive manufacturing

Kai Zhao et al.

JOURNAL OF MANUFACTURING PROCESSES (2020)

添加到收藏夹

Article Materials Science, Biomaterials

In situ fabrication of a titanium-niobium alloy with tailored microstructures, enhanced mechanical properties and biocompatibility by using selective laser melting

Danlei Zhao et al.

MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effects of direct aging on near-alpha Ti-6Al-2Sn-4Zr-2Mo (Ti-6242) titanium alloy fabricated by selective laser melting (SLM)

Haiyang Fan et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Planting carbon nanotubes within Ti-6Al-4V to make high-quality composite powders for 3D printing high-performance Ti-6Al-4V matrix composites

Yu Liu et al.

SCRIPTA MATERIALIA (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

Selective laser manufacturing of Ti-based alloys and composites: impact of process parameters, application trends, and future prospects

N. Singh et al.

MATERIALS TODAY ADVANCES (2020)

添加到收藏夹

Article Engineering, Mechanical

Effects of defects on tensile and fatigue behaviors of selective laser melted titanium alloy in very high cycle regime

Fulin Liu et al.

INTERNATIONAL JOURNAL OF FATIGUE (2020)

添加到收藏夹

Article Engineering, Chemical

Selective laser melting of titanium parts: Influence of laser process parameters on macro- and microstructures and tensile property

Dongsheng Sun et al.

POWDER TECHNOLOGY (2019)

添加到收藏夹

Article Engineering, Manufacturing

Multi-objective accelerated process optimization of mechanical properties in laser-based additive manufacturing: Case study on Selective Laser Melting (SLM) Ti-6Al-4V

Amir M. Aboutaleb et al.

JOURNAL OF MANUFACTURING PROCESSES (2019)

添加到收藏夹

Article Optics

Optimization of processing parameters and establishment of a relationship between microstructure and mechanical properties of SLM titanium alloy

Zhen Wang et al.

OPTICS AND LASER TECHNOLOGY (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Selective laser melting under the reactive atmosphere: A convenient and efficient approach to fabricate ultrahigh strength commercially pure titanium without sacrificing ductility

D. W. Wang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Chemistry, Physical

Improvement on mechanical properties and corrosion resistance of titanium-tantalum alloys in-situ fabricated via selective laser melting

Danlei Zhao et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Materials Science, Biomaterials

Resemblance in Corrosion Behavior of Selective Laser Melted and Traditional Monolithic β Ti-24Nb-4Zr-8Sn Alloy

Peng Qin et al.

ACS BIOMATERIALS SCIENCE & ENGINEERING (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of laser power on oxygen and nitrogen concentration of commercially pure titanium manufactured by selective laser melting

Tae-Wook Na et al.

MATERIALS CHARACTERIZATION (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of heat treatment on microstructure and mechanical properties of the selective laser melting processed Ti-5Al-2.5Sn alpha titanium alloy

Kaiwen Wei et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Femtosecond Laser Produced Hydrophobic Hierarchical Structures on Additive Manufacturing Parts

Lishi Jiao et al.

NANOMATERIALS (2018)

添加到收藏夹

Article Engineering, Manufacturing

Evolution of metallurgical properties of Ti-6Al-4V alloy fabricated in different energy densities in the Selective Laser Melting technique

Snehashis Pal et al.

JOURNAL OF MANUFACTURING PROCESSES (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Compressive and fatigue behavior of beta-type titanium porous structures fabricated by electron beam melting

Y. J. Liu et al.

ACTA MATERIALIA (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure, defects and mechanical behavior of beta-type titanium porous structures manufactured by electron beam melting and selective laser melting

Y. J. Liu et al.

ACTA MATERIALIA (2016)

添加到收藏夹

Article Engineering, Mechanical

Microstructure, static properties, and fatigue crack growth mechanisms in Ti-6Al-4V fabricated by additive manufacturing: LENS and EBM

Yuwei Zhai et al.

ENGINEERING FAILURE ANALYSIS (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Correlation between porosity and processing parameters in TiAl6V4 produced by selective laser melting

Galina Kasperovich et al.

MATERIALS & DESIGN (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Manufacture by selective laser melting and mechanical behavior of a biomedical Ti-24Nb-4Zr-8Sn alloy

L. C. Zhang et al.

SCRIPTA MATERIALIA (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Titanium alloys for biomedical applications

H. J. Rack et al.

MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS (2006)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.