☆ 4.6 Article

High-performance ternary solar cells by introducing a medium bandgap acceptor with complementary absorption, reducing energy disorder and enhancing glass transition temperature

JOURNAL OF MATERIALS CHEMISTRY A (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Multidisciplinary

A Universal Nonhalogenated Polymer Donor for High-Performance Organic Photovoltaic Cells

Tao Zhang et al.

Summary: Two nonhalogenated polymers, PB1 and PB2, were prepared and tested in organic photovoltaic cells. PB2 showed superior power conversion efficiency when combined with BTP-eC9 and PBDB-TF, as well as good compatibility with various nonfullerene acceptors. When combined with a wide-bandgap electron acceptor (F-BTA3), PB2 achieved excellent PCE, demonstrating its potential for developing low-cost materials and expanding the application of OPV cells.

ADVANCED MATERIALS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Mechanism study on organic ternary photovoltaics with 18.3% certified efficiency: from molecule to device

Yaokai Li et al.

Summary: This study systematically investigates the working mechanism of ternary blend organic photovoltaics based on non-fullerene acceptors (NFAs). Molecular dynamics simulations and morphology characterization reveal that the addition of larger band gap and highly miscible NFAs improves composition-dependent band gap and charge recombination, leading to enhanced power conversion efficiency.

ENERGY & ENVIRONMENTAL SCIENCE (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Ternary strategy enabling high-efficiency rigid and flexible organic solar cells with reduced non-radiative voltage loss

Xiaopeng Duan et al.

Summary: This study demonstrates the successful fabrication of efficient ternary organic solar cells by introducing ZY-4Cl as a third component. The ternary system exhibits reduced voltage loss, improved molecular ordering, and suppressed non-radiative recombination, leading to higher efficiencies compared to binary blends.

ENERGY & ENVIRONMENTAL SCIENCE (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Non-fullerene acceptor alloy strategy enabling stable ternary polymer solar cells with efficiency of 17.74%

Minglang Li et al.

Summary: The study demonstrates that forming an alloyed acceptor by choosing non-fullerene acceptors with similar chemical structures and electrical properties is an effective strategy to improve the performance of organic solar cells.

JOURNAL OF MATERIALS CHEMISTRY C (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Single-Junction Organic Solar Cells with 19.17% Efficiency Enabled by Introducing One Asymmetric Guest Acceptor

Rui Sun et al.

Summary: The ternary strategy is an effective approach to achieve high-efficiency OSCs, but the nonradiative voltage loss limits further efficiency improvements. By incorporating an asymmetric guest acceptor BTP-2F2Cl, the OSCs show improved photoluminescence quantum yield, exciton diffusion length, and absorption spectrum, leading to enhanced power conversion efficiency.

ADVANCED MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Desired open-circuit voltage increase enables efficiencies approaching 19% in symmetric-asymmetric molecule ternary organic photovoltaics

Lingling Zhan et al.

Summary: By constructing ternary organic photovoltaics, the open-circuit voltage (V-oc) loss is reduced, leading to a higher voltage without sacrificing the absorbing range. In addition, the ternary blend exhibits enhanced charge transport property and a higher fill factor.

JOULE (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Volatilizable Solid Additive-Assisted Treatment Enables Organic Solar Cells with Efficiency over 18.8% and Fill Factor Exceeding 80%

Sunan Bao et al.

Summary: Controlling the self-assembly of organic semiconductors to form well-developed nanoscale phase separation is critical for building high-performance organic solar cells. A new approach utilizing the synergistic effect of DTT and CN is developed to tune the morphology of the photoactive layer, leading to a significant increase in power-conversion efficiency and fill factor in ternary OSCs processed with dual additives of CN and DTT.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Approaching 18% efficiency of ternary organic photovoltaics with wide bandgap polymer donor and well compatible Y6:Y6-1O as acceptor

Xiaoling Ma et al.

Summary: A series of ternary organic photovoltaics have been successfully fabricated by incorporating Y6-1O, which leads to an increase in open-circuit voltage and power conversion efficiency of the devices. By finely adjusting the content of Y6-1O, the optimal device with 30% Y6-1O achieves a conversion efficiency of 17.91%, with significantly improved short-circuit current density and fill factor.

NATIONAL SCIENCE REVIEW (2021)

添加到收藏夹

Article Chemistry, Physical

The Effects of Chromophore Halogenation on the Stability of UV-Absorbing Organic Solar Cells

Tianran Liu et al.

Summary: Transparent photovoltaics using ultraviolet photons as energy sources are suitable for lower power applications like regulating lighting and temperature in electrochromic windows. The study shows that halogenated chromophores can cause degradation in operational stability of photovoltaic devices, which should be taken into consideration during molecular design process.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Alkyl-Chain Branching of Non-Fullerene Acceptors Flanking Conjugated Side Groups toward Highly Efficient Organic Solar Cells

Jianquan Zhang et al.

Summary: Side-chain modifications of NFAs play a crucial role in enhancing the performance of OSCs. By introducing bulkier alkyl chains branched at specific positions, it is possible to alter molecular packing, improve open-circuit voltage, and achieve better device performance. The side-chain branching design of NFAs shows great potential in optimizing molecular properties and promoting photovoltaic performance.

ADVANCED ENERGY MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Intermolecular Interaction Control Enables Co-optimization of Efficiency, Deformability, Mechanical and Thermal Stability of Stretchable Organic Solar Cells

Qinglian Zhu et al.

Summary: This study reconciles the unfavorable trade-off among efficiency, deformability, and life expectancy of stretchable organic solar cells by introducing a mechanically deformable guest component in an all-polymer model system. The strengthened interaction between two donors plays a critical role in stabilizing morphology against external forces and enhancing efficiency. Additionally, this interaction benefits thermal stability, allowing for minimal efficiency degradation after prolonged heating.

SMALL (2021)

添加到收藏夹

Article Energy & Fuels

Non-fullerene acceptors with branched side chains and improved molecular packing to exceed 18% efficiency in organic solar cells

Chao Li et al.

Summary: The molecular design of acceptor and donor molecules has significantly advanced organic photovoltaics. By introducing branched alkyl chains in non-fullerene acceptors, favorable morphology in the active layer can be achieved, leading to a certified device efficiency of 17.9%. This modification can completely alter the molecular packing behavior of non-fullerene acceptors, resulting in improved structural order and charge transport in thin films.

NATURE ENERGY (2021)

添加到收藏夹

Article Chemistry, Physical

Achieving over 17% efficiency of ternary all-polymer solar cells with two well-compatible polymer acceptors

Rui Sun et al.

Summary: The study focuses on developing high-performance all-polymer solar cells by designing a novel polymer acceptor PY2F-T and enhancing efficiency through ternary blend with PYT in the PM6: PY2F-T host system. This approach significantly improves power conversion efficiency and stability, marking a promising future for the application of all-PSCs.

JOULE (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Nanographene-Osmapentalyne Complexes as a Cathode Interlayer in Organic Solar Cells Enhance Efficiency over 18%

Longzhu Liu et al.

Summary: Interface engineering through conjugated extension of metal-nanographene molecules as cathode interlayer materials has successfully enhanced the photovoltaic performance of nonfullerene solar cells. Modified hexabenzocoronenes-styryl can effectively improve the performance of organic solar cells by facilitating carrier transport and impeding carrier recombination through better interfacial contacts and morphology regulation.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Single-Junction Organic Photovoltaic Cell with 19% Efficiency

Yong Cui et al.

Summary: By combining material design and ternary blending strategy, a maximum power conversion efficiency of 19.0% is achieved in single-junction OPV cells. Optimized active layer structure significantly improves the photovoltaic parameters, enhancing the performance and PCE values of the cells.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Well-Mixed Phase Formed by Two Compatible Non-Fullerene Acceptors Enables Ternary Organic Solar Cells with Efficiency over 18.6%

Yunhao Cai et al.

Summary: The ternary strategy of incorporating a third component into a binary blend has led to highly efficient organic solar cells with unprecedented power conversion efficiency values.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Polymerized small molecular acceptor based all-polymer solar cells with an efficiency of 16.16% via tuning polymer blend morphology by molecular design

Jiaqi Du et al.

Summary: Recent advancements have been made in all-polymer solar cells (all-PSCs) based on polymerized small molecular acceptors (PSMAs). Two new A-DA'D-A small molecule acceptor based PSMAs, PS-Se and PN-Se, were synthesized to study the impact of molecular structure on photovoltaic performance. Cryogenic transmission electron microscopy and photoinduced force microscopy revealed the aggregation behavior and morphology of the polymer and acceptor blend films, leading to higher power conversion efficiency in all-PSCs.

NATURE COMMUNICATIONS (2021)

添加到收藏夹

Article Chemistry, Physical

Boosting photovoltaic performance of ternary organic solar cells by integrating a multi-functional guest acceptor

Yuli Yin et al.

Summary: Constructing ternary structure with a new Y-T acceptor significantly enhances the efficiency and performance of organic solar cells by improving spectroscopic complementarity, enhancing exciton utilization, adjusting morphology, and promoting three-dimensional phase separation. This work provides insights into molecular design of nonfullerene acceptors and suggests guidelines for selecting guest components in ternary organic solar cells.

NANO ENERGY (2021)

添加到收藏夹

Editorial Material Chemistry, Physical

Higher-voltage asymmetric-electrolyte metal-air batteries

Lijuan Zhang et al.

Summary: A novel separator and an atomically dispersed catalyst were reported in a recent study to achieve high voltage and long stability of Asymmetric-electrolyte metal-air batteries (AMABs).

JOULE (2021)

添加到收藏夹

Article Chemistry, Physical

Reduced non-radiative charge recombination enables organic photovoltaic cell approaching 19% efficiency

Pengqing Bi et al.

Summary: Introducing HDO-4Cl increased the exciton diffusion length in the acceptor phase, reducing non-radiative charge recombination and improving photon utilization efficiency in PBDB-TF: eC9-based OPV cells. This led to achieving a high-efficiency OPV cell with outstanding power conversion efficiency, demonstrating the effectiveness of regulating exciton behaviors in reducing energy loss.

JOULE (2021)

添加到收藏夹

Article Chemistry, Physical

Small-molecular donor guest achieves rigid 18.5% and flexible 15.9% efficiency organic photovoltaic via fine-tuning microstructure morphology

Zhenyu Chen et al.

Summary: Incorporating highly ordered crystalline small molecules into host binary systems has been shown to significantly improve the photovoltaic performance of organic solar cells. By designing and synthesizing small molecular donors with similar chemical structures, it was found that the silicon-containing G19 exhibited a higher degree of order in the host system, resulting in improved power conversion efficiency.

JOULE (2021)

添加到收藏夹

Article Chemistry, Physical

The performance-stability conundrum of BTP-based organic solar cells

Yunpeng Qin et al.

Summary: Organic photovoltaic technology has achieved high power conversion efficiency, but achieving long-term stability is crucial. Research has identified a structure-T-g framework for BTP acceptors and shown that PC71BM can improve stability under certain conditions.

JOULE (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

High-efficiency organic solar cells with low voltage loss induced by solvent additive strategy

Jiali Song et al.

Summary: The use of a solvent additive strategy with diiodomethane (DIM) instead of 1,8-diiodooctane (DIO) has been effective in reducing high voltage loss (V-loss) in organic solar cells (OSCs), leading to improved power conversion efficiency (PCE) and open-circuit voltage (V-oc). The approach has also been successfully applied to different blends, achieving high PCEs with reduced V-loss.

MATTER (2021)

添加到收藏夹

Article Chemistry, Physical

Regulating the phase separation of ternary organic solar cells via 3D architectured AIE molecules

Muhammad Abdullah Adil et al.

NANO ENERGY (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Interface-enhanced organic solar cells with extrapolated T80 lifetimes of over 20 years

Xiang Xu et al.

SCIENCE BULLETIN (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Tailoring and Modifying an Organic Electron Acceptor toward the Cathode Interlayer for Highly Efficient Organic Solar Cells

Qing Liao et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Single-Junction Organic Photovoltaic Cells with Approaching 18% Efficiency

Yong Cui et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Article Multidisciplinary Sciences

18% Efficiency organic solar cells

Qishi Liu et al.

SCIENCE BULLETIN (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Highly efficient organic photovoltaics with enhanced stability through the formation of doping-induced stable interfaces

Zhi Jiang et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2020)

添加到收藏夹

Article Chemistry, Physical

Efficient Organic Solar Cell with 16.88% Efficiency Enabled by Refined Acceptor Crystallization and Morphology with Improved Charge Transfer and Transport Properties

Lei Zhu et al.

ADVANCED ENERGY MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

Exploiting Ternary Blends for Improved Photostability in High-Efficiency Organic Solar Cells

Nicola Gasparini et al.

ACS ENERGY LETTERS (2020)

添加到收藏夹

Article Energy & Fuels

High-Performance Ternary Organic Solar Cells with Morphology-Modulated Hole Transfer and Improved Ultraviolet Photostability

Kang-Ning Zhang et al.

SOLAR RRL (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Low Temperature Aggregation Transitions in N3 and Y6 Acceptors Enable Double-Annealing Method That Yields Hierarchical Morphology and Superior Efficiency in Nonfullerene Organic Solar Cells

Yunpeng Qin et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Optimized active layer morphology toward efficient and polymer batch insensitive organic solar cells

Kangkang Weng et al.

NATURE COMMUNICATIONS (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Random terpolymer based on thiophene-thiazolothiazole unit enabling efficient non-fullerene organic solar cells

Jingnan Wu et al.

NATURE COMMUNICATIONS (2020)

添加到收藏夹

Article Chemistry, Physical

Self-Assembled Monolayer Enables Hole Transport Layer-Free Organic Solar Cells with 18% Efficiency and Improved Operational Stability

Yuanbao Lin et al.

ACS ENERGY LETTERS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Ferrocene as a highly volatile solid additive in non-fullerene organic solar cells with enhanced photovoltaic performance

Linglong Ye et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

添加到收藏夹

Review Chemistry, Physical

Emerging Approaches in Enhancing the Efficiency and Stability in Non-Fullerene Organic Solar Cells

Fuwen Zhao et al.

ADVANCED ENERGY MATERIALS (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Highly Efficient and Photostable Ternary Organic Solar Cells Enabled by the Combination of Non-Fullerene and Fullerene Acceptors with Thienopyrrolodione-based Polymer Donors

Jong-Woon Ha et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

15.34% efficiency all-small-molecule organic solar cells with an improved fill factor enabled by a fullerene additive

Dingqin Hu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Enabling low voltage losses and high photocurrent in fullerene-free organic photovoltaics

Jun Yuan et al.

NATURE COMMUNICATIONS (2019)

添加到收藏夹

Article Chemistry, Physical

Reduced Nonradiative Energy Loss Caused by Aggregation of Nonfullerene Acceptor in Organic Solar Cells

Yunpeng Qin et al.

ADVANCED ENERGY MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Single-Junction Organic Solar Cell with over 15% Efficiency Using Fused-Ring Acceptor with Electron-Deficient Core

Jun Yuan et al.

JOULE (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

High-Performance Organic Bulk-Heterojunction Solar Cells Based on Multiple-Donor or Multiple-Acceptor Components

Wenchao Huang et al.

ADVANCED MATERIALS (2018)

添加到收藏夹

Article Chemistry, Physical

Highly Efficient Organic Solar Cells Based on S,N-Heteroacene Non-Fullerene Acceptors

Chuyi Huang et al.

CHEMISTRY OF MATERIALS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Dithienopicenocarbazole-Based Acceptors for Efficient Organic Solar Cells with Optoelectronic Response Over 1000 nm and an Extremely Low Energy Loss

Zhaoyang Yao et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

添加到收藏夹

Article Multidisciplinary Sciences

A low cost and high performance polymer donor material for polymer solar cells

Chenkai Sun et al.

NATURE COMMUNICATIONS (2018)

添加到收藏夹

Review Chemistry, Physical

Morphology Control in Organic Solar Cells

Fuwen Zhao et al.

ADVANCED ENERGY MATERIALS (2018)

添加到收藏夹

Article Chemistry, Physical

Ternary Organic Solar Cells With 12.8% Efficiency Using Two Nonfullerene Acceptors With Complementary Absorptions

Bin Kan et al.

ADVANCED ENERGY MATERIALS (2018)

添加到收藏夹

Article Energy & Fuels

Assessing the stability of high performance solution processed small molecule solar cells

Rongrong Cheacharoen et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2017)

添加到收藏夹

Article Multidisciplinary Sciences

Abnormal strong burn-in degradation of highly efficient polymer solar cells caused by spinodal donor-acceptor demixing

Ning Li et al.

NATURE COMMUNICATIONS (2017)

添加到收藏夹

Article Chemistry, Physical

Reducing Voltage Losses in Cascade Organic Solar Cells while Maintaining High External Quantum Efficiencies

Vasileios C. Nikolis et al.

ADVANCED ENERGY MATERIALS (2017)

添加到收藏夹

Article Chemistry, Physical

Burn-in Free Nonfullerene-Based Organic Solar Cells

Nicola Gasparini et al.

ADVANCED ENERGY MATERIALS (2017)

添加到收藏夹

Article Chemistry, Physical

Measuring the Glass Transition Temperature of Conjugated Polymer Films with Ultraviolet-Visible Spectroscopy

Samuel E. Root et al.

CHEMISTRY OF MATERIALS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Solar Trees: First Large-Scale Demonstration of Fully Solution Coated, Semitransparent, Flexible Organic Photovoltaic Modules

Stephane Berny et al.

ADVANCED SCIENCE (2016)

添加到收藏夹

Article Energy & Fuels

Fast charge separation in a non-fullerene organic solar cell with a small driving force

Jing Liu et al.

NATURE ENERGY (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Large-Bandgap Conjugated Polymer for Versatile Photovoltaic Applications with High Performance

Maojie Zhang et al.

ADVANCED MATERIALS (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Polymer-Polymer Forster Resonance Energy Transfer Significantly Boosts the Power Conversion Efficiency of Bulk-Heterojunction Solar Cells

Vinay Gupta et al.

ADVANCED MATERIALS (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Enhanced efficiency of polymer solar cells by adding a high-mobility conjugated polymer

Shenghua Liu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Conjugated Polymer-Small Molecule Alloy Leads to High Efficient Ternary Organic Solar Cells

Jianqi Zhang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)

添加到收藏夹

Article Multidisciplinary Sciences

High-performance ternary blend polymer solar cells involving both energy transfer and hole relay processes

Luyao Lu et al.

NATURE COMMUNICATIONS (2015)

添加到收藏夹

Article Optics

Ternary blend polymer solar cells with enhanced power conversion efficiency

Luyao Lu et al.

NATURE PHOTONICS (2014)

添加到收藏夹

Article Multidisciplinary Sciences

Long-term stable polymer solar cells with significantly reduced burn-in loss

Jaemin Kong et al.

NATURE COMMUNICATIONS (2014)

添加到收藏夹

Article Multidisciplinary Sciences

High internal quantum efficiency in fullerene solar cells based on crosslinked polymer donor networks

Bo Liu et al.

NATURE COMMUNICATIONS (2012)

添加到收藏夹

Article Chemistry, Physical

A consistent and accurate ab initio parametrization of density functional dispersion correction (DFT-D) for the 94 elements H-Pu

Stefan Grimme et al.

JOURNAL OF CHEMICAL PHYSICS (2010)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.