4.6 Article

Polymeric membranes through self-initiation and self-polymerization for high-performance bioethanol pervaporation

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Chemical

High-flux corrugated PDMS composite membrane fabricated by using nanofiber substrate

Jiahui Li et al.

Summary: In this study, a facile approach was proposed to develop a high-flux PDMS membrane with a corrugated morphology. The electrospun nanofiber substrate with highly interconnected and porous structures was coated with PDMS solution to generate a corrugated PDMS membrane layer, which greatly increased the surface area and reduced the transport resistance. By optimizing the pore structure of the nanofiber substrate and reducing the membrane thickness, the corrugated PDMS membrane exhibited up to one order of magnitude higher permeation flux compared with state-of-the-arts PDMS membranes for pervaporation separation of ethanol/water mixtures.

JOURNAL OF MEMBRANE SCIENCE (2022)

Article Engineering, Chemical

Visible-light-induced ultrafast preparation of PDMS membrane for the pervaporative separation of furfural

Yaqi Wang et al.

Summary: In this study, a visible-light-induced polymerized PDMS membrane was developed for the separation of furfural, offering a more environmentally-friendly and controllable alternative to UV-induced polymerization. The differences among different photoinitiators were compared and the conditions for preparing the membrane were optimized, resulting in a membrane with excellent separation performance.

JOURNAL OF MEMBRANE SCIENCE (2022)

Article Engineering, Chemical

Polydimethylsiloxane based membranes for biofuels pervaporation

Zhihao Si et al.

Summary: Biofuels from biomass are being increasingly investigated as a response to the excessive consumption of petroleum-based fuels. The fermentation-separation coupled system, integrated with pervaporation (PV), has been developed to meet the high demands for biofuels. Polydimethylsiloxane (PDMS) based membranes are widely used and suggested to enhance the production and application of bioalcohols. However, there is a lack of comprehensive reviews on the latest progress of PDMS based membranes for biofuels pervaporation.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

Article Chemistry, Physical

Soft double-network polydimethylsiloxane: fast healing of fracture toughness

Chao Chen et al.

Summary: In this study, a soft, solvent-free, double-network polydimethylsiloxane (DN-PDMS) material was developed, which achieves ultralow stiffness and improved toughness through one network, and self-healing functionality through another network.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Article Chemistry, Physical

Synergistically improved PIM-1 membrane gas separation performance by PAF-1 incorporation and UV irradiation

Rujing Hou et al.

Summary: Super-glassy polymer membranes have shown a trade-off between permeability and selectivity, but this study demonstrates that adding nanoparticles and post UV irradiation treatment can significantly improve both properties.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Article Chemistry, Multidisciplinary

A Transparent, Highly Stretchable, Solvent-Resistant, Recyclable Multifunctional Ionogel with Underwater Self-Healing and Adhesion for Reliable Strain Sensors

Liguo Xu et al.

Summary: This study introduces multifunctional ionogels with desirable properties prepared via one-step photoinitiated polymerization, showing excellent mechanical strength, resilience, and underwater adhesion. The ionogels, rich in noncovalent interactions, exhibit high tolerance against water and various organic solvents, making them promising for wearable sensors in detecting large body motions and subtle muscle movements.

ADVANCED MATERIALS (2021)

Article Chemistry, Multidisciplinary

Leveraging Free Volume Manipulation to Improve the Membrane Separation Performance of Amine-Functionalized PIM-1

Katherine Mizrahi Rodriguez et al.

Summary: Gas-separation polymer membranes suffer from a permeability-selectivity trade-off, but an innovative in situ crosslinking and solid-state deprotection method can improve performance by increasing free volume element (FVE) size while maintaining a narrow distribution, enabling polymers to surpass upper bounds and improve CO2-based selectivities by 200%. This approach transforms polymers into chemical analogues with enhanced performance, overcoming traditional trade-offs.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Article Engineering, Chemical

A novel concept of hierarchical cation exchange membrane fabricated from commodity precursors through an easily scalable process

Francesco Deboli et al.

Summary: The study fabricated hierarchical cation exchange membranes using blade coating and UV crosslinking techniques, demonstrating their potential for desalination. The simple and cost-effective manufacturing process resulted in membranes with performance comparable to state-of-the-art materials, indicating promising industrial applications.

JOURNAL OF MEMBRANE SCIENCE (2021)

Article Chemistry, Multidisciplinary

Photoswitching Cationic and Radical Polymerizations: Spatiotemporal Control of Thermoset Properties

Yuting Ma et al.

Summary: The study successfully addresses the challenge of fabricating polymeric materials with spatially controlled physical properties in thermosetting manufacturing. By regulating the dosage and wavelength of light, the mechanical properties of the crosslinked material can be temporally and spatially tuned, enabling high-resolution control over mechanical properties through photopatterning.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

Article Engineering, Chemical

Thin-film composite membranes fabricated directly on a large-porous ceramic support using poly (4-styrenesulfonic acid) as a scaffold for ethanol dehydration

Xin Zhang et al.

Summary: TFC membranes prepared with PSS scaffolds on a ceramic support exhibit enhanced adhesion and separation performance, showing potential for dehydration of organic solutions with high membrane flux and good stability.

JOURNAL OF MEMBRANE SCIENCE (2021)

Article Chemistry, Multidisciplinary

Mechanically Robust and UV-Curable Shape-Memory Polymers for Digital Light Processing Based 4D Printing

Biao Zhang et al.

Summary: A mechanically robust and UV-curable SMP system has been developed for 4D printing, allowing the fabrication of high-resolution, highly complex 3D structures with large shape change upon heating. The developed SMP system exhibits excellent fatigue resistance and can be repeatedly loaded more than 10,000 times, significantly improving the mechanical performance of SMP-based 4D printing structures for engineering applications such as aerospace, smart furniture, and soft robots.

ADVANCED MATERIALS (2021)

Article Chemistry, Multidisciplinary

Cationic UV Curing of Bioderived Epoxy Furan-Based Coatings: Tailoring the Final Properties by In Situ Formation of Hybrid Network and Addition of Monofunctional Monomer

Lorenzo Pezzana et al.

Summary: Biobased monomers are functionalized with epoxy groups to produce new cationic UV-curable monomers for coating applications. The properties of the final UV-cured coatings can be easily tailored by adjusting the ratio of different monomers or incorporating inorganic networks. The thermal and mechanical properties of the coatings are significantly influenced by the content of TEOS and GFA in the formulations.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

Article Nanoscience & Nanotechnology

Visible-Light-Sensitive Triazine-Coated Silica Nanoparticles: A Dual Role Approach to Polymer Nanocomposite Materials with Enhanced Properties

Xiaotong Peng et al.

Summary: By coating silica nanoparticles with blue-light-sensitive triazine derivatives, a dual-functional nanocomposite material is prepared which can efficiently induce free radical polymerization, provide photoinitiator capability under LED@410 nm irradiation, and exhibit enhanced stability and mechanical properties during photopolymerization.

ACS APPLIED MATERIALS & INTERFACES (2021)

Article Chemistry, Physical

Boosting the pervaporation performance of PDMS membrane for 1-butanol by MAF-6

Peiwen Guan et al.

Summary: The hydrophobic MAF-6 particles were synthesized and doped into PDMS to fabricate a mixed matrix membrane, which significantly enhanced the separation performance of PDMS membrane and decreased the energy consumption during the pervaporation process.

COLLOID AND POLYMER SCIENCE (2021)

Article Polymer Science

Solvent-Free Three-Dimensional Printing of Biodegradable Elastomers Using Liquid Macrophotoinitiators

Matthias Sandmeier et al.

Summary: Solvent-free 3D printing of biodegradable elastomers using macrophotoinitiator-polymer conjugates enables high-quality printing without the need for organic solvents. This approach allows for systematic investigation of structure-property relationships and offers new perspectives for additive manufacturing of bioresorbable medical implants and functional devices.

MACROMOLECULES (2021)

Article Green & Sustainable Science & Technology

Current status and future prospective of bio-ethanol industry in China

Bo Wu et al.

Summary: The development of fuel ethanol is an important strategy to ensure energy security, with China becoming the third-largest ethanol producer globally. The Chinese ethanol industry is sensitive to corn prices and requires technological improvements. Additionally, research progress on cellulosic ethanol production and sustainable development strategies were discussed in the review.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2021)

Article Chemistry, Multidisciplinary

Fluoroalkyl-grafted methacrylate-PDMS membranes using fluoromonomer as a diluent for enhancing biobutanol pervaporation

Zhihao Si et al.

Summary: Alcohol-permselective membranes play an important role in bioalcohol production, but face technical barriers such as long curing time and trade-offs between performance and anti-biofouling ability. By introducing a UV-polymerizable fluoromonomer into the membrane-forming system, green and ultrafast membrane preparation is achieved. The resulting MA-PDMS-F membranes showed enhanced membrane flux and separation factor compared to MA-PDMS membranes, with outstanding anti-biofouling ability due to weak interactions with microbes in fermentation broths.

GREEN CHEMISTRY (2021)

Article Chemistry, Physical

Drastic enhancement of carbon dioxide adsorption in fluoroalkyl-modified poly(allylamine)

Athanasios Koutsianos et al.

Summary: Polyamine-based carbon dioxide sorbents face challenges in balancing amine content and efficiency. By incorporating short fluoroalkyl chains into poly(allylamine) (PAA) and cross-linking with C-60, additional diffusion pathways are generated, resulting in increased CO2 uptake and amine efficiency in diluted gas streams at room temperature. The presence of void volume in fluoroalkyl-functionalized PAA sorbents disrupts the strong amine hydrogen bonding network, leading to improved performance of the sorbent.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Article Polymer Science

Facile Photo and Thermal Two-Stage Curing for High-Performance 3D Printing of Poly(Dimethylsiloxane)

Ji Zhongying et al.

MACROMOLECULAR RAPID COMMUNICATIONS (2020)

Article Materials Science, Composites

High dielectric constant UV curable polyurethane acrylate/indium tin oxide composites for capacitive sensing

Cristian Mendes-Felipe et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2020)

Article Engineering, Chemical

Towards the dehydration of ethanol using pervaporation cross-linked poly (vinyl alcohol)/graphene oxide membranes

Roberto Castro-Munoz et al.

JOURNAL OF MEMBRANE SCIENCE (2019)

Article Chemistry, Multidisciplinary

Transparent Omniphobic Coating with Glass-Like Wear Resistance and Polymer-Like Bendability

Kaka Zhang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Article Engineering, Chemical

Fabrication and characterization of micro-patterned PDMS composite membranes for enhanced ethanol recovery

Xinping He et al.

JOURNAL OF MEMBRANE SCIENCE (2018)

Article Chemistry, Multidisciplinary

High-Flux High-Selectivity Metal-Organic Framework MIL-160 Membrane for Xylene Isomer Separation by Pervaporation

Xiaocao Wu et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

Article Chemistry, Physical

Thiol-ene photopolymerization of vinyl-functionalized metal-organic frameworks towards mixed-matrix membranes

Chinnadurai Satheeshkumar et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Review Green & Sustainable Science & Technology

The application of microwave heating in bioenergy: A review on the microwave pre-treatment and upgrading technologies for biomass

Emily T. Kostas et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

Review Chemistry, Physical

Solar-energy-driven conversion of biomass to bioethanol: a sustainable approach

Betina Tabah et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Article Nanoscience & Nanotechnology

One-Step Assembly of Molecular Separation Membranes by Direct Atomizing Oligomers

Hongwei Fan et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Article Chemistry, Multidisciplinary

Star polymer synthesis via lambda-orthogonal photochemistry

Kai Hiltebrandt et al.

CHEMICAL COMMUNICATIONS (2016)

Editorial Material Multidisciplinary Sciences

Seven chemical separations to change the world

David S. Sholl et al.

NATURE (2016)

Article Engineering, Chemical

TS-1 Molecular Sieves Filled Polydimethylsiloxane Membranes for Ethanol/Water Separation via Pervaporation

Xiaolong Han et al.

POLYMER ENGINEERING AND SCIENCE (2016)

Article Nanoscience & Nanotechnology

UV-Curable Nanocomposite Based on Methacrylic-Siloxane Resin and Surface-Modified TiO2 Nanocrystals

Chiara Ingrosso et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Article Chemistry, Multidisciplinary

Photoinduced Postsynthetic Polymerization of a Metal-Organic Framework toward a Flexible Stand-Alone Membrane

Yuanyuan Zhang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2015)

Article Chemistry, Physical

Mixed matrix membranes with molecular-interaction-driven tunable free volumes for efficient bio-fuel recovery

Gongping Liu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

Review Chemistry, Multidisciplinary

Strategies to Reduce Oxygen Inhibition in Photoinduced Polymerization

Samuel Clark Ligon et al.

CHEMICAL REVIEWS (2014)

Article Biochemical Research Methods

Print your own membrane: direct rapid prototyping of polydimethylsiloxane

Tim Femmer et al.

LAB ON A CHIP (2014)

Article Chemistry, Physical

ZIF-71 as a potential filler to prepare pervaporation membranes for bio-alcohol recovery

Yanbo Li et al.

JOURNAL OF MATERIALS CHEMISTRY A (2014)

Article Chemistry, Physical

Nanodisperse ZIF-8/PDMS hybrid membranes for biobutanol permselective pervaporation

Hongwei Fan et al.

JOURNAL OF MATERIALS CHEMISTRY A (2014)

Article Chemistry, Physical

Polydopamine-based superhydrophobic membranes for biofuel recovery

Qian Liu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2013)

Review Biotechnology & Applied Microbiology

Recent progress in polycrystalline zeolite membrane research

Y. S. Lin et al.

CURRENT OPINION IN CHEMICAL ENGINEERING (2013)

Article Chemistry, Multidisciplinary

An Organophilic Pervaporation Membrane Derived from Metal-Organic Framework Nanoparticles for Efficient Recovery of Bio-Alcohols

Xin-Lei Liu et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2011)

Article Chemistry, Applied

Photocrosslinkable tissue adhesive based on dextran

Haibo Li et al.

CARBOHYDRATE POLYMERS (2011)

Review Chemistry, Applied

Synthesis and characterization of hyperbranched photosensitive polysiloxane urethane acrylate

Fang Sun et al.

PROGRESS IN ORGANIC COATINGS (2009)

Article Chemistry, Multidisciplinary

A self-assembly approach to chemical micropatterning of poly(dimethylsiloxane)

Maaike L. van Poll et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2007)

Article Multidisciplinary Sciences

Ethanol can contribute to energy and environmental goals

AE Farrell et al.

SCIENCE (2006)

Article Engineering, Environmental

Composite membranes for hydrophobic pervaporation: study with the toluene-water system

S Satyanarayana et al.

CHEMICAL ENGINEERING JOURNAL (2004)

Article Engineering, Chemical

Application of pervaporation and adsorption to the phenol removal from wastewater

W Kujawski et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2004)

Article Engineering, Chemical

Ethanol production by continuous fermentation-pervaporation: a preliminary economic analysis

DJ O'Brien et al.

JOURNAL OF MEMBRANE SCIENCE (2000)